3516B Generator Set
Diesel Generator Sets
-
Specification Summary
- Standby Rating 2250 kVA
- Prime Power Rating 2000 kVA
- Emissions/Fuel Strategy Low Fuel, Low Emissions
- Voltage 380 to 11000 Volts
- Download Brochure
Generator Set Specifications
| Standby Rating | 2250 kVA |
| Prime Power Rating | 2000 kVA |
| Emissions/Fuel Strategy | Low Fuel, Low Emissions |
| Voltage | 380 to 11000 Volts |
| Frequency | 50 Hz |
| Speed | 1500 rpm |
| Duty Cycle | Standby, Mission Critical, Prime, Continuous |
| Maximum Rating | 2250 kVA |
| Minimum Rating | 1750 kVA |
Engine Specifications
| Engine Model | 3516B TA, V-16, 4-Stroke Water-Cooled Diesel |
| Bore | 170 mm |
| Stroke | 190 mm |
| Displacement | 4210.64 l |
| Compression Ratio | 14.0:1 |
| Aspiration | TA |
| Fuel System | Electronic unit injection |
| Governor Type | Adem™3 |
Generator Set Dimensions
| Length - Minimum | 5928 mm |
| Length - Maximum | 251.7 mm |
| Width - Maximum | 2286 mm |
| Height - Maximum | 2367 mm |
| Dry Weight - Genset (minimum) | 14470 kg |
| Dry Weight - Genset (maximum) | 18290 kg |
Air Inlet
Air Cleaner
Cooling
Package mounted radiator
Exhaust
Exhaust flange outlet
Exhaust flange outlet
Air cleaner; single element canister type
Package mounted radiator
Exhaust flange outlet
Primary fuel filter with integral water separator
Secondary fuel filter
Matched to the performance and output characteristics of Cat engines
IP23 Protection
Busbar
Engine cool-down timer
Frequency (Hz)
DC Volts
Volts (L-L & L-N)
Customizable screens
Limiter and exciter diode monitor
Power Factor (per phase & average)
1 Programmable relay outputs (Form C
Text alarm/event descriptions
Speed adjust
1 Programmable digital outputs
Overspeed - Emergency stop
4 Programmable relay outputs (Form A)
Emergency stop - Failure to start (overcrank)
Reverse reactive power (kVAr) (32RV)
6 Customer programmable digital inputs
Customer data link (Modbus RTU)
Emergency stop pushbutton
Environmental sealed front face
kW-hr (total) - kVAr-hr (total)
Cat Connect
Load histogram feature
RPM - DC volts
Failure to start (overcrank)
Serial annunciator module data link
Coolant temperature
Operating hours
kW (per phase, average & percent)
IVR includes:
Low coolant temperature
Reactive droop capability
Digital indication for:
KVAR/PF modes
Lamp test
Controls:
PLC functionality
0 True RMS AC metering, 3-phase, +/-2% accuracy
Oil pressure (psi, kPa or bar)
Generator mounted - rear facing
Amps (per phase & average)
Low coolant level
3 Analog inputs
Reverse power (kW) (32)
24 Volt DC operation
Over / under voltage (2 7/ 59)
Over / under frequency (81 o/u)
RFI suppression
3 Phase voltage sensing
EMCP 4.2B
Alarm acknowledge
Auto/start/stop control
kVA (per phase, average & percent)
Min / max exciter
Engine cycle crank
Low oil pressure
Accessory module data link
High coolant temperature
Warning / shutdown with common LED indication of shutdowns for:
Communications:
Overcurrent (50 / 51)
Number of I/O varies on options selected:
Programmable protective relaying functions:
EMCP 4 Genset Controller
Certified standard PGS provided
ATAAC - 3516E Package Radiators shipped installed
Dry exhaust manifold
Flanged faced outlet(s)
Secondary fuel filters
Flexible fuel lines - shipped loose
Fuel cooler; not included with packages without radiator
Fuel priming pump
Paint - Caterpillar Yellow except rails and radiators gloss black
Right hand servicing
Flywheel and flywheel housing - SAE No. 00
SAE Standard rotation
Caterpillar yellow with high gloss black rails and radiator
Busbar connections, right side extension box, bottom cable entry
3 Phase brushless, salient pole
Form wound - Permanent magnet
Anti condensation Space Heater
Busbar connections, top center mounted, top cable entry
6 Leads
Winding temperature detectors
Class H temperature rise at 40C ambient (125C prime / 150C standby)
Form wound
Internal excitation
NEMA Class H insulation
Low Voltage:
Random wound
High voltage:
Medium voltage:
Class H insulation, Class F temperature rise at 40C ambient (105C prime / 130C standby)
NEMA Class H insulation, Class H temperature rise at 40C ambient (125C prime / 150C standby
Permanent magnet
NEMA standard hole pattern
ADEM A3
English
Fumes disposal
Oil drain lines and valve
Lubricating oil
Integral lube oil cool
Oil filter, filler and dipstick
Gear type lube oil pump
Rails - engine / generator / radiator mounting
Anti-vibration mounts (shipped loose)
Rubber anti-vibration mounts (shipped loose)
Battery and battery rack w/cables
24 Volt electric starting motor
Battery disconnect switch
45 Amp charging alternator
Air cleaner; single element canister type
Package mounted radiator
Exhaust flange outlet
Primary fuel filter with integral water separator
Secondary fuel filter
Matched to the performance and output characteristics of Cat engines
IP23 Protection
Busbar
Engine cool-down timer
Frequency (Hz)
DC Volts
Volts (L-L & L-N)
Customizable screens
Limiter and exciter diode monitor
Power Factor (per phase & average)
1 Programmable relay outputs (Form C
Text alarm/event descriptions
Speed adjust
1 Programmable digital outputs
Overspeed - Emergency stop
4 Programmable relay outputs (Form A)
Emergency stop - Failure to start (overcrank)
Reverse reactive power (kVAr) (32RV)
6 Customer programmable digital inputs
Customer data link (Modbus RTU)
Emergency stop pushbutton
Environmental sealed front face
kW-hr (total) - kVAr-hr (total)
Cat Connect
Load histogram feature
RPM - DC volts
Failure to start (overcrank)
Serial annunciator module data link
Coolant temperature
Operating hours
kW (per phase, average & percent)
IVR includes:
Low coolant temperature
Reactive droop capability
Digital indication for:
KVAR/PF modes
Lamp test
Controls:
PLC functionality
0 True RMS AC metering, 3-phase, +/-2% accuracy
Oil pressure (psi, kPa or bar)
Generator mounted - rear facing
Amps (per phase & average)
Low coolant level
3 Analog inputs
Reverse power (kW) (32)
24 Volt DC operation
Over / under voltage (2 7/ 59)
Over / under frequency (81 o/u)
RFI suppression
3 Phase voltage sensing
EMCP 4.2B
Alarm acknowledge
Auto/start/stop control
kVA (per phase, average & percent)
Min / max exciter
Engine cycle crank
Low oil pressure
Accessory module data link
High coolant temperature
Warning / shutdown with common LED indication of shutdowns for:
Communications:
Overcurrent (50 / 51)
Number of I/O varies on options selected:
Programmable protective relaying functions:
EMCP 4 Genset Controller
Certified standard PGS provided
ATAAC - 3516E Package Radiators shipped installed
Dry exhaust manifold
Flanged faced outlet(s)
Secondary fuel filters
Flexible fuel lines - shipped loose
Fuel cooler; not included with packages without radiator
Fuel priming pump
Paint - Caterpillar Yellow except rails and radiators gloss black
Right hand servicing
Flywheel and flywheel housing - SAE No. 00
SAE Standard rotation
Caterpillar yellow with high gloss black rails and radiator
Busbar connections, right side extension box, bottom cable entry
3 Phase brushless, salient pole
Form wound - Permanent magnet
Anti condensation Space Heater
Busbar connections, top center mounted, top cable entry
6 Leads
Winding temperature detectors
Class H temperature rise at 40C ambient (125C prime / 150C standby)
Form wound
Internal excitation
NEMA Class H insulation
Low Voltage:
Random wound
High voltage:
Medium voltage:
Class H insulation, Class F temperature rise at 40C ambient (105C prime / 130C standby)
NEMA Class H insulation, Class H temperature rise at 40C ambient (125C prime / 150C standby
Permanent magnet
NEMA standard hole pattern
ADEM A3
English
Fumes disposal
Oil drain lines and valve
Lubricating oil
Integral lube oil cool
Oil filter, filler and dipstick
Gear type lube oil pump
Rails - engine / generator / radiator mounting
Anti-vibration mounts (shipped loose)
Rubber anti-vibration mounts (shipped loose)
Battery and battery rack w/cables
24 Volt electric starting motor
Battery disconnect switch
45 Amp charging alternator
Air cleaner; single element canister type
Package mounted radiator
Exhaust flange outlet
Primary fuel filter with integral water separator
Secondary fuel filter
Matched to the performance and output characteristics of Cat engines
IP23 Protection
Busbar
Engine cool-down timer
Frequency (Hz)
DC Volts
Volts (L-L & L-N)
Customizable screens
Limiter and exciter diode monitor
Power Factor (per phase & average)
1 Programmable relay outputs (Form C
Text alarm/event descriptions
Speed adjust
1 Programmable digital outputs
Overspeed - Emergency stop
4 Programmable relay outputs (Form A)
Emergency stop - Failure to start (overcrank)
Reverse reactive power (kVAr) (32RV)
6 Customer programmable digital inputs
Customer data link (Modbus RTU)
Emergency stop pushbutton
Environmental sealed front face
kW-hr (total) - kVAr-hr (total)
Cat Connect
Load histogram feature
RPM - DC volts
Failure to start (overcrank)
Serial annunciator module data link
Coolant temperature
Operating hours
kW (per phase, average & percent)
IVR includes:
Low coolant temperature
Reactive droop capability
Digital indication for:
KVAR/PF modes
Lamp test
Controls:
PLC functionality
0 True RMS AC metering, 3-phase, +/-2% accuracy
Oil pressure (psi, kPa or bar)
Generator mounted - rear facing
Amps (per phase & average)
Low coolant level
3 Analog inputs
Reverse power (kW) (32)
24 Volt DC operation
Over / under voltage (2 7/ 59)
Over / under frequency (81 o/u)
RFI suppression
3 Phase voltage sensing
EMCP 4.2B
Alarm acknowledge
Auto/start/stop control
kVA (per phase, average & percent)
Min / max exciter
Engine cycle crank
Low oil pressure
Accessory module data link
High coolant temperature
Warning / shutdown with common LED indication of shutdowns for:
Communications:
Overcurrent (50 / 51)
Number of I/O varies on options selected:
Programmable protective relaying functions:
EMCP 4 Genset Controller
Certified standard PGS provided
ATAAC - 3516E Package Radiators shipped installed
Dry exhaust manifold
Flanged faced outlet(s)
Secondary fuel filters
Flexible fuel lines - shipped loose
Fuel cooler; not included with packages without radiator
Fuel priming pump
Paint - Caterpillar Yellow except rails and radiators gloss black
Right hand servicing
Flywheel and flywheel housing - SAE No. 00
SAE Standard rotation
Caterpillar yellow with high gloss black rails and radiator
Busbar connections, right side extension box, bottom cable entry
3 Phase brushless, salient pole
Form wound - Permanent magnet
Anti condensation Space Heater
Busbar connections, top center mounted, top cable entry
6 Leads
Winding temperature detectors
Class H temperature rise at 40C ambient (125C prime / 150C standby)
Form wound
Internal excitation
NEMA Class H insulation
Low Voltage:
Random wound
High voltage:
Medium voltage:
Class H insulation, Class F temperature rise at 40C ambient (105C prime / 130C standby)
NEMA Class H insulation, Class H temperature rise at 40C ambient (125C prime / 150C standby
Permanent magnet
NEMA standard hole pattern
ADEM A3
English
Fumes disposal
Oil drain lines and valve
Lubricating oil
Integral lube oil cool
Oil filter, filler and dipstick
Gear type lube oil pump
Rails - engine / generator / radiator mounting
Anti-vibration mounts (shipped loose)
Rubber anti-vibration mounts (shipped loose)
Battery and battery rack w/cables
24 Volt electric starting motor
Battery disconnect switch
45 Amp charging alternator
Fuel
Primary fuel filter with integral water separator
Secondary fuel filter
Fuel priming pump
Generator
Matched to the performance and output characteristics of Cat engines
IP23 Protection
Power Termination
Bus Bar
Bus Bar
Air cleaner; single element canister type
Package mounted radiator
Exhaust flange outlet
Primary fuel filter with integral water separator
Secondary fuel filter
Matched to the performance and output characteristics of Cat engines
IP23 Protection
Busbar
Engine cool-down timer
Frequency (Hz)
DC Volts
Volts (L-L & L-N)
Customizable screens
Limiter and exciter diode monitor
Power Factor (per phase & average)
1 Programmable relay outputs (Form C
Text alarm/event descriptions
Speed adjust
1 Programmable digital outputs
Overspeed - Emergency stop
4 Programmable relay outputs (Form A)
Emergency stop - Failure to start (overcrank)
Reverse reactive power (kVAr) (32RV)
6 Customer programmable digital inputs
Customer data link (Modbus RTU)
Emergency stop pushbutton
Environmental sealed front face
kW-hr (total) - kVAr-hr (total)
Cat Connect
Load histogram feature
RPM - DC volts
Failure to start (overcrank)
Serial annunciator module data link
Coolant temperature
Operating hours
kW (per phase, average & percent)
IVR includes:
Low coolant temperature
Reactive droop capability
Digital indication for:
KVAR/PF modes
Lamp test
Controls:
PLC functionality
0 True RMS AC metering, 3-phase, +/-2% accuracy
Oil pressure (psi, kPa or bar)
Generator mounted - rear facing
Amps (per phase & average)
Low coolant level
3 Analog inputs
Reverse power (kW) (32)
24 Volt DC operation
Over / under voltage (2 7/ 59)
Over / under frequency (81 o/u)
RFI suppression
3 Phase voltage sensing
EMCP 4.2B
Alarm acknowledge
Auto/start/stop control
kVA (per phase, average & percent)
Min / max exciter
Engine cycle crank
Low oil pressure
Accessory module data link
High coolant temperature
Warning / shutdown with common LED indication of shutdowns for:
Communications:
Overcurrent (50 / 51)
Number of I/O varies on options selected:
Programmable protective relaying functions:
EMCP 4 Genset Controller
Certified standard PGS provided
ATAAC - 3516E Package Radiators shipped installed
Dry exhaust manifold
Flanged faced outlet(s)
Secondary fuel filters
Flexible fuel lines - shipped loose
Fuel cooler; not included with packages without radiator
Fuel priming pump
Paint - Caterpillar Yellow except rails and radiators gloss black
Right hand servicing
Flywheel and flywheel housing - SAE No. 00
SAE Standard rotation
Caterpillar yellow with high gloss black rails and radiator
Busbar connections, right side extension box, bottom cable entry
3 Phase brushless, salient pole
Form wound - Permanent magnet
Anti condensation Space Heater
Busbar connections, top center mounted, top cable entry
6 Leads
Winding temperature detectors
Class H temperature rise at 40C ambient (125C prime / 150C standby)
Form wound
Internal excitation
NEMA Class H insulation
Low Voltage:
Random wound
High voltage:
Medium voltage:
Class H insulation, Class F temperature rise at 40C ambient (105C prime / 130C standby)
NEMA Class H insulation, Class H temperature rise at 40C ambient (125C prime / 150C standby
Permanent magnet
NEMA standard hole pattern
ADEM A3
English
Fumes disposal
Oil drain lines and valve
Lubricating oil
Integral lube oil cool
Oil filter, filler and dipstick
Gear type lube oil pump
Rails - engine / generator / radiator mounting
Anti-vibration mounts (shipped loose)
Rubber anti-vibration mounts (shipped loose)
Battery and battery rack w/cables
24 Volt electric starting motor
Battery disconnect switch
45 Amp charging alternator
Air cleaner; single element canister type
Package mounted radiator
Exhaust flange outlet
Primary fuel filter with integral water separator
Secondary fuel filter
Matched to the performance and output characteristics of Cat engines
IP23 Protection
Busbar
Engine cool-down timer
Frequency (Hz)
DC Volts
Volts (L-L & L-N)
Customizable screens
Limiter and exciter diode monitor
Power Factor (per phase & average)
1 Programmable relay outputs (Form C
Text alarm/event descriptions
Speed adjust
1 Programmable digital outputs
Overspeed - Emergency stop
4 Programmable relay outputs (Form A)
Emergency stop - Failure to start (overcrank)
Reverse reactive power (kVAr) (32RV)
6 Customer programmable digital inputs
Customer data link (Modbus RTU)
Emergency stop pushbutton
Environmental sealed front face
kW-hr (total) - kVAr-hr (total)
Cat Connect
Load histogram feature
RPM - DC volts
Failure to start (overcrank)
Serial annunciator module data link
Coolant temperature
Operating hours
kW (per phase, average & percent)
IVR includes:
Low coolant temperature
Reactive droop capability
Digital indication for:
KVAR/PF modes
Lamp test
Controls:
PLC functionality
0 True RMS AC metering, 3-phase, +/-2% accuracy
Oil pressure (psi, kPa or bar)
Generator mounted - rear facing
Amps (per phase & average)
Low coolant level
3 Analog inputs
Reverse power (kW) (32)
24 Volt DC operation
Over / under voltage (2 7/ 59)
Over / under frequency (81 o/u)
RFI suppression
3 Phase voltage sensing
EMCP 4.2B
Alarm acknowledge
Auto/start/stop control
kVA (per phase, average & percent)
Min / max exciter
Engine cycle crank
Low oil pressure
Accessory module data link
High coolant temperature
Warning / shutdown with common LED indication of shutdowns for:
Communications:
Overcurrent (50 / 51)
Number of I/O varies on options selected:
Programmable protective relaying functions:
EMCP 4 Genset Controller
Certified standard PGS provided
ATAAC - 3516E Package Radiators shipped installed
Dry exhaust manifold
Flanged faced outlet(s)
Secondary fuel filters
Flexible fuel lines - shipped loose
Fuel cooler; not included with packages without radiator
Fuel priming pump
Paint - Caterpillar Yellow except rails and radiators gloss black
Right hand servicing
Flywheel and flywheel housing - SAE No. 00
SAE Standard rotation
Caterpillar yellow with high gloss black rails and radiator
Busbar connections, right side extension box, bottom cable entry
3 Phase brushless, salient pole
Form wound - Permanent magnet
Anti condensation Space Heater
Busbar connections, top center mounted, top cable entry
6 Leads
Winding temperature detectors
Class H temperature rise at 40C ambient (125C prime / 150C standby)
Form wound
Internal excitation
NEMA Class H insulation
Low Voltage:
Random wound
High voltage:
Medium voltage:
Class H insulation, Class F temperature rise at 40C ambient (105C prime / 130C standby)
NEMA Class H insulation, Class H temperature rise at 40C ambient (125C prime / 150C standby
Permanent magnet
NEMA standard hole pattern
ADEM A3
English
Fumes disposal
Oil drain lines and valve
Lubricating oil
Integral lube oil cool
Oil filter, filler and dipstick
Gear type lube oil pump
Rails - engine / generator / radiator mounting
Anti-vibration mounts (shipped loose)
Rubber anti-vibration mounts (shipped loose)
Battery and battery rack w/cables
24 Volt electric starting motor
Battery disconnect switch
45 Amp charging alternator
Air cleaner; single element canister type
Package mounted radiator
Exhaust flange outlet
Primary fuel filter with integral water separator
Secondary fuel filter
Matched to the performance and output characteristics of Cat engines
IP23 Protection
Busbar
Engine cool-down timer
Frequency (Hz)
DC Volts
Volts (L-L & L-N)
Customizable screens
Limiter and exciter diode monitor
Power Factor (per phase & average)
1 Programmable relay outputs (Form C
Text alarm/event descriptions
Speed adjust
1 Programmable digital outputs
Overspeed - Emergency stop
4 Programmable relay outputs (Form A)
Emergency stop - Failure to start (overcrank)
Reverse reactive power (kVAr) (32RV)
6 Customer programmable digital inputs
Customer data link (Modbus RTU)
Emergency stop pushbutton
Environmental sealed front face
kW-hr (total) - kVAr-hr (total)
Cat Connect
Load histogram feature
RPM - DC volts
Failure to start (overcrank)
Serial annunciator module data link
Coolant temperature
Operating hours
kW (per phase, average & percent)
IVR includes:
Low coolant temperature
Reactive droop capability
Digital indication for:
KVAR/PF modes
Lamp test
Controls:
PLC functionality
0 True RMS AC metering, 3-phase, +/-2% accuracy
Oil pressure (psi, kPa or bar)
Generator mounted - rear facing
Amps (per phase & average)
Low coolant level
3 Analog inputs
Reverse power (kW) (32)
24 Volt DC operation
Over / under voltage (2 7/ 59)
Over / under frequency (81 o/u)
RFI suppression
3 Phase voltage sensing
EMCP 4.2B
Alarm acknowledge
Auto/start/stop control
kVA (per phase, average & percent)
Min / max exciter
Engine cycle crank
Low oil pressure
Accessory module data link
High coolant temperature
Warning / shutdown with common LED indication of shutdowns for:
Communications:
Overcurrent (50 / 51)
Number of I/O varies on options selected:
Programmable protective relaying functions:
EMCP 4 Genset Controller
Certified standard PGS provided
ATAAC - 3516E Package Radiators shipped installed
Dry exhaust manifold
Flanged faced outlet(s)
Secondary fuel filters
Flexible fuel lines - shipped loose
Fuel cooler; not included with packages without radiator
Fuel priming pump
Paint - Caterpillar Yellow except rails and radiators gloss black
Right hand servicing
Flywheel and flywheel housing - SAE No. 00
SAE Standard rotation
Caterpillar yellow with high gloss black rails and radiator
Busbar connections, right side extension box, bottom cable entry
3 Phase brushless, salient pole
Form wound - Permanent magnet
Anti condensation Space Heater
Busbar connections, top center mounted, top cable entry
6 Leads
Winding temperature detectors
Class H temperature rise at 40C ambient (125C prime / 150C standby)
Form wound
Internal excitation
NEMA Class H insulation
Low Voltage:
Random wound
High voltage:
Medium voltage:
Class H insulation, Class F temperature rise at 40C ambient (105C prime / 130C standby)
NEMA Class H insulation, Class H temperature rise at 40C ambient (125C prime / 150C standby
Permanent magnet
NEMA standard hole pattern
ADEM A3
English
Fumes disposal
Oil drain lines and valve
Lubricating oil
Integral lube oil cool
Oil filter, filler and dipstick
Gear type lube oil pump
Rails - engine / generator / radiator mounting
Anti-vibration mounts (shipped loose)
Rubber anti-vibration mounts (shipped loose)
Battery and battery rack w/cables
24 Volt electric starting motor
Battery disconnect switch
45 Amp charging alternator
Control Panel
EMCP 4 Genset Controller
General
Paint - Caterpillar Yellow except rails and radiators gloss black
Paint - Caterpillar Yellow except rails and radiators gloss black
Air cleaner; single element canister type
Package mounted radiator
Exhaust flange outlet
Primary fuel filter with integral water separator
Secondary fuel filter
Matched to the performance and output characteristics of Cat engines
IP23 Protection
Busbar
Engine cool-down timer
Frequency (Hz)
DC Volts
Volts (L-L & L-N)
Customizable screens
Limiter and exciter diode monitor
Power Factor (per phase & average)
1 Programmable relay outputs (Form C
Text alarm/event descriptions
Speed adjust
1 Programmable digital outputs
Overspeed - Emergency stop
4 Programmable relay outputs (Form A)
Emergency stop - Failure to start (overcrank)
Reverse reactive power (kVAr) (32RV)
6 Customer programmable digital inputs
Customer data link (Modbus RTU)
Emergency stop pushbutton
Environmental sealed front face
kW-hr (total) - kVAr-hr (total)
Cat Connect
Load histogram feature
RPM - DC volts
Failure to start (overcrank)
Serial annunciator module data link
Coolant temperature
Operating hours
kW (per phase, average & percent)
IVR includes:
Low coolant temperature
Reactive droop capability
Digital indication for:
KVAR/PF modes
Lamp test
Controls:
PLC functionality
0 True RMS AC metering, 3-phase, +/-2% accuracy
Oil pressure (psi, kPa or bar)
Generator mounted - rear facing
Amps (per phase & average)
Low coolant level
3 Analog inputs
Reverse power (kW) (32)
24 Volt DC operation
Over / under voltage (2 7/ 59)
Over / under frequency (81 o/u)
RFI suppression
3 Phase voltage sensing
EMCP 4.2B
Alarm acknowledge
Auto/start/stop control
kVA (per phase, average & percent)
Min / max exciter
Engine cycle crank
Low oil pressure
Accessory module data link
High coolant temperature
Warning / shutdown with common LED indication of shutdowns for:
Communications:
Overcurrent (50 / 51)
Number of I/O varies on options selected:
Programmable protective relaying functions:
EMCP 4 Genset Controller
Certified standard PGS provided
ATAAC - 3516E Package Radiators shipped installed
Dry exhaust manifold
Flanged faced outlet(s)
Secondary fuel filters
Flexible fuel lines - shipped loose
Fuel cooler; not included with packages without radiator
Fuel priming pump
Paint - Caterpillar Yellow except rails and radiators gloss black
Right hand servicing
Flywheel and flywheel housing - SAE No. 00
SAE Standard rotation
Caterpillar yellow with high gloss black rails and radiator
Busbar connections, right side extension box, bottom cable entry
3 Phase brushless, salient pole
Form wound - Permanent magnet
Anti condensation Space Heater
Busbar connections, top center mounted, top cable entry
6 Leads
Winding temperature detectors
Class H temperature rise at 40C ambient (125C prime / 150C standby)
Form wound
Internal excitation
NEMA Class H insulation
Low Voltage:
Random wound
High voltage:
Medium voltage:
Class H insulation, Class F temperature rise at 40C ambient (105C prime / 130C standby)
NEMA Class H insulation, Class H temperature rise at 40C ambient (125C prime / 150C standby
Permanent magnet
NEMA standard hole pattern
ADEM A3
English
Fumes disposal
Oil drain lines and valve
Lubricating oil
Integral lube oil cool
Oil filter, filler and dipstick
Gear type lube oil pump
Rails - engine / generator / radiator mounting
Anti-vibration mounts (shipped loose)
Rubber anti-vibration mounts (shipped loose)
Battery and battery rack w/cables
24 Volt electric starting motor
Battery disconnect switch
45 Amp charging alternator
Air cleaner; single element canister type
Package mounted radiator
Exhaust flange outlet
Primary fuel filter with integral water separator
Secondary fuel filter
Matched to the performance and output characteristics of Cat engines
IP23 Protection
Busbar
Engine cool-down timer
Frequency (Hz)
DC Volts
Volts (L-L & L-N)
Customizable screens
Limiter and exciter diode monitor
Power Factor (per phase & average)
1 Programmable relay outputs (Form C
Text alarm/event descriptions
Speed adjust
1 Programmable digital outputs
Overspeed - Emergency stop
4 Programmable relay outputs (Form A)
Emergency stop - Failure to start (overcrank)
Reverse reactive power (kVAr) (32RV)
6 Customer programmable digital inputs
Customer data link (Modbus RTU)
Emergency stop pushbutton
Environmental sealed front face
kW-hr (total) - kVAr-hr (total)
Cat Connect
Load histogram feature
RPM - DC volts
Failure to start (overcrank)
Serial annunciator module data link
Coolant temperature
Operating hours
kW (per phase, average & percent)
IVR includes:
Low coolant temperature
Reactive droop capability
Digital indication for:
KVAR/PF modes
Lamp test
Controls:
PLC functionality
0 True RMS AC metering, 3-phase, +/-2% accuracy
Oil pressure (psi, kPa or bar)
Generator mounted - rear facing
Amps (per phase & average)
Low coolant level
3 Analog inputs
Reverse power (kW) (32)
24 Volt DC operation
Over / under voltage (2 7/ 59)
Over / under frequency (81 o/u)
RFI suppression
3 Phase voltage sensing
EMCP 4.2B
Alarm acknowledge
Auto/start/stop control
kVA (per phase, average & percent)
Min / max exciter
Engine cycle crank
Low oil pressure
Accessory module data link
High coolant temperature
Warning / shutdown with common LED indication of shutdowns for:
Communications:
Overcurrent (50 / 51)
Number of I/O varies on options selected:
Programmable protective relaying functions:
EMCP 4 Genset Controller
Certified standard PGS provided
ATAAC - 3516E Package Radiators shipped installed
Dry exhaust manifold
Flanged faced outlet(s)
Secondary fuel filters
Flexible fuel lines - shipped loose
Fuel cooler; not included with packages without radiator
Fuel priming pump
Paint - Caterpillar Yellow except rails and radiators gloss black
Right hand servicing
Flywheel and flywheel housing - SAE No. 00
SAE Standard rotation
Caterpillar yellow with high gloss black rails and radiator
Busbar connections, right side extension box, bottom cable entry
3 Phase brushless, salient pole
Form wound - Permanent magnet
Anti condensation Space Heater
Busbar connections, top center mounted, top cable entry
6 Leads
Winding temperature detectors
Class H temperature rise at 40C ambient (125C prime / 150C standby)
Form wound
Internal excitation
NEMA Class H insulation
Low Voltage:
Random wound
High voltage:
Medium voltage:
Class H insulation, Class F temperature rise at 40C ambient (105C prime / 130C standby)
NEMA Class H insulation, Class H temperature rise at 40C ambient (125C prime / 150C standby
Permanent magnet
NEMA standard hole pattern
ADEM A3
English
Fumes disposal
Oil drain lines and valve
Lubricating oil
Integral lube oil cool
Oil filter, filler and dipstick
Gear type lube oil pump
Rails - engine / generator / radiator mounting
Anti-vibration mounts (shipped loose)
Rubber anti-vibration mounts (shipped loose)
Battery and battery rack w/cables
24 Volt electric starting motor
Battery disconnect switch
45 Amp charging alternator
Air cleaner; single element canister type
Package mounted radiator
Exhaust flange outlet
Primary fuel filter with integral water separator
Secondary fuel filter
Matched to the performance and output characteristics of Cat engines
IP23 Protection
Busbar
Engine cool-down timer
Frequency (Hz)
DC Volts
Volts (L-L & L-N)
Customizable screens
Limiter and exciter diode monitor
Power Factor (per phase & average)
1 Programmable relay outputs (Form C
Text alarm/event descriptions
Speed adjust
1 Programmable digital outputs
Overspeed - Emergency stop
4 Programmable relay outputs (Form A)
Emergency stop - Failure to start (overcrank)
Reverse reactive power (kVAr) (32RV)
6 Customer programmable digital inputs
Customer data link (Modbus RTU)
Emergency stop pushbutton
Environmental sealed front face
kW-hr (total) - kVAr-hr (total)
Cat Connect
Load histogram feature
RPM - DC volts
Failure to start (overcrank)
Serial annunciator module data link
Coolant temperature
Operating hours
kW (per phase, average & percent)
IVR includes:
Low coolant temperature
Reactive droop capability
Digital indication for:
KVAR/PF modes
Lamp test
Controls:
PLC functionality
0 True RMS AC metering, 3-phase, +/-2% accuracy
Oil pressure (psi, kPa or bar)
Generator mounted - rear facing
Amps (per phase & average)
Low coolant level
3 Analog inputs
Reverse power (kW) (32)
24 Volt DC operation
Over / under voltage (2 7/ 59)
Over / under frequency (81 o/u)
RFI suppression
3 Phase voltage sensing
EMCP 4.2B
Alarm acknowledge
Auto/start/stop control
kVA (per phase, average & percent)
Min / max exciter
Engine cycle crank
Low oil pressure
Accessory module data link
High coolant temperature
Warning / shutdown with common LED indication of shutdowns for:
Communications:
Overcurrent (50 / 51)
Number of I/O varies on options selected:
Programmable protective relaying functions:
EMCP 4 Genset Controller
Certified standard PGS provided
ATAAC - 3516E Package Radiators shipped installed
Dry exhaust manifold
Flanged faced outlet(s)
Secondary fuel filters
Flexible fuel lines - shipped loose
Fuel cooler; not included with packages without radiator
Fuel priming pump
Paint - Caterpillar Yellow except rails and radiators gloss black
Right hand servicing
Flywheel and flywheel housing - SAE No. 00
SAE Standard rotation
Caterpillar yellow with high gloss black rails and radiator
Busbar connections, right side extension box, bottom cable entry
3 Phase brushless, salient pole
Form wound - Permanent magnet
Anti condensation Space Heater
Busbar connections, top center mounted, top cable entry
6 Leads
Winding temperature detectors
Class H temperature rise at 40C ambient (125C prime / 150C standby)
Form wound
Internal excitation
NEMA Class H insulation
Low Voltage:
Random wound
High voltage:
Medium voltage:
Class H insulation, Class F temperature rise at 40C ambient (105C prime / 130C standby)
NEMA Class H insulation, Class H temperature rise at 40C ambient (125C prime / 150C standby
Permanent magnet
NEMA standard hole pattern
ADEM A3
English
Fumes disposal
Oil drain lines and valve
Lubricating oil
Integral lube oil cool
Oil filter, filler and dipstick
Gear type lube oil pump
Rails - engine / generator / radiator mounting
Anti-vibration mounts (shipped loose)
Rubber anti-vibration mounts (shipped loose)
Battery and battery rack w/cables
24 Volt electric starting motor
Battery disconnect switch
45 Amp charging alternator
Air Inlet System
Air cleaner; single element canister type
Cooling
Package mounted radiator
Exhaust
Exhaust flange outlet
Fuel
Primary fuel filter with integral water separator
Secondary fuel filter
Generator
Matched to the performance and output characteristics of Cat engines
IP23 Protection
Power Termination
Busbar
Control Panels
Engine cool-down timer
Frequency (Hz)
DC Volts
Volts (L-L & L-N)
Customizable screens
Limiter and exciter diode monitor
Power Factor (per phase & average)
1 Programmable relay outputs (Form C
Text alarm/event descriptions
Speed adjust
1 Programmable digital outputs
Overspeed - Emergency stop
4 Programmable relay outputs (Form A)
Emergency stop - Failure to start (overcrank)
Reverse reactive power (kVAr) (32RV)
6 Customer programmable digital inputs
Customer data link (Modbus RTU)
Emergency stop pushbutton
Environmental sealed front face
kW-hr (total) - kVAr-hr (total)
Cat Connect
Load histogram feature
RPM - DC volts
Failure to start (overcrank)
Serial annunciator module data link
Coolant temperature
Operating hours
kW (per phase, average & percent)
IVR includes:
Low coolant temperature
Reactive droop capability
Digital indication for:
KVAR/PF modes
Lamp test
Controls:
PLC functionality
0 True RMS AC metering, 3-phase, +/-2% accuracy
Oil pressure (psi, kPa or bar)
Generator mounted - rear facing
Amps (per phase & average)
Low coolant level
3 Analog inputs
Reverse power (kW) (32)
24 Volt DC operation
Over / under voltage (2 7/ 59)
Over / under frequency (81 o/u)
RFI suppression
3 Phase voltage sensing
EMCP 4.2B
Alarm acknowledge
Auto/start/stop control
kVA (per phase, average & percent)
Min / max exciter
Engine cycle crank
Low oil pressure
Accessory module data link
High coolant temperature
Warning / shutdown with common LED indication of shutdowns for:
Communications:
Overcurrent (50 / 51)
Number of I/O varies on options selected:
Programmable protective relaying functions:
Control Panel
EMCP 4 Genset Controller
Cooling System
Certified standard PGS provided
ATAAC - 3516E Package Radiators shipped installed
Exhaust System
Dry exhaust manifold
Flanged faced outlet(s)
Fuel System
Secondary fuel filters
Flexible fuel lines - shipped loose
Fuel cooler; not included with packages without radiator
Fuel priming pump
General
Paint - Caterpillar Yellow except rails and radiators gloss black
Right hand servicing
Flywheel and flywheel housing - SAE No. 00
SAE Standard rotation
Caterpillar yellow with high gloss black rails and radiator
Generator and Attachments
Busbar connections, right side extension box, bottom cable entry
3 Phase brushless, salient pole
Form wound - Permanent magnet
Anti condensation Space Heater
Busbar connections, top center mounted, top cable entry
6 Leads
Winding temperature detectors
Class H temperature rise at 40C ambient (125C prime / 150C standby)
Form wound
Internal excitation
NEMA Class H insulation
Low Voltage:
Random wound
High voltage:
Medium voltage:
Class H insulation, Class F temperature rise at 40C ambient (105C prime / 130C standby)
NEMA Class H insulation, Class H temperature rise at 40C ambient (125C prime / 150C standby
Permanent magnet
NEMA standard hole pattern
Governing System
ADEM A3
Literature
English
Lubrication System
Fumes disposal
Oil drain lines and valve
Lubricating oil
Integral lube oil cool
Oil filter, filler and dipstick
Gear type lube oil pump
Mounting System
Rails - engine / generator / radiator mounting
Anti-vibration mounts (shipped loose)
Rubber anti-vibration mounts (shipped loose)
Starting System
Battery and battery rack w/cables
24 Volt electric starting motor
Battery disconnect switch
45 Amp charging alternator
Air Inlet System
Air cleaner; single element canister type
Cooling
Package mounted radiator
Exhaust
Exhaust flange outlet
Fuel
Primary fuel filter with integral water separator
Secondary fuel filter
Generator
Matched to the performance and output characteristics of Cat engines
IP23 Protection
Power Termination
Busbar
Control Panels
Engine cool-down timer
Frequency (Hz)
DC Volts
Volts (L-L & L-N)
Customizable screens
Limiter and exciter diode monitor
Power Factor (per phase & average)
1 Programmable relay outputs (Form C
Text alarm/event descriptions
Speed adjust
1 Programmable digital outputs
Overspeed - Emergency stop
4 Programmable relay outputs (Form A)
Emergency stop - Failure to start (overcrank)
Reverse reactive power (kVAr) (32RV)
6 Customer programmable digital inputs
Customer data link (Modbus RTU)
Emergency stop pushbutton
Environmental sealed front face
kW-hr (total) - kVAr-hr (total)
Cat Connect
Load histogram feature
RPM - DC volts
Failure to start (overcrank)
Serial annunciator module data link
Coolant temperature
Operating hours
kW (per phase, average & percent)
IVR includes:
Low coolant temperature
Reactive droop capability
Digital indication for:
KVAR/PF modes
Lamp test
Controls:
PLC functionality
0 True RMS AC metering, 3-phase, +/-2% accuracy
Oil pressure (psi, kPa or bar)
Generator mounted - rear facing
Amps (per phase & average)
Low coolant level
3 Analog inputs
Reverse power (kW) (32)
24 Volt DC operation
Over / under voltage (2 7/ 59)
Over / under frequency (81 o/u)
RFI suppression
3 Phase voltage sensing
EMCP 4.2B
Alarm acknowledge
Auto/start/stop control
kVA (per phase, average & percent)
Min / max exciter
Engine cycle crank
Low oil pressure
Accessory module data link
High coolant temperature
Warning / shutdown with common LED indication of shutdowns for:
Communications:
Overcurrent (50 / 51)
Number of I/O varies on options selected:
Programmable protective relaying functions:
Control Panel
EMCP 4 Genset Controller
Cooling System
Certified standard PGS provided
ATAAC - 3516E Package Radiators shipped installed
Exhaust System
Dry exhaust manifold
Flanged faced outlet(s)
Fuel System
Secondary fuel filters
Flexible fuel lines - shipped loose
Fuel cooler; not included with packages without radiator
Fuel priming pump
General
Paint - Caterpillar Yellow except rails and radiators gloss black
Right hand servicing
Flywheel and flywheel housing - SAE No. 00
SAE Standard rotation
Caterpillar yellow with high gloss black rails and radiator
Generator and Attachments
Busbar connections, right side extension box, bottom cable entry
3 Phase brushless, salient pole
Form wound - Permanent magnet
Anti condensation Space Heater
Busbar connections, top center mounted, top cable entry
6 Leads
Winding temperature detectors
Class H temperature rise at 40C ambient (125C prime / 150C standby)
Form wound
Internal excitation
NEMA Class H insulation
Low Voltage:
Random wound
High voltage:
Medium voltage:
Class H insulation, Class F temperature rise at 40C ambient (105C prime / 130C standby)
NEMA Class H insulation, Class H temperature rise at 40C ambient (125C prime / 150C standby
Permanent magnet
NEMA standard hole pattern
Governing System
ADEM A3
Literature
English
Lubrication System
Fumes disposal
Oil drain lines and valve
Lubricating oil
Integral lube oil cool
Oil filter, filler and dipstick
Gear type lube oil pump
Mounting System
Rails - engine / generator / radiator mounting
Anti-vibration mounts (shipped loose)
Rubber anti-vibration mounts (shipped loose)
Starting System
Battery and battery rack w/cables
24 Volt electric starting motor
Battery disconnect switch
45 Amp charging alternator
Air Inlet System
Air cleaner; single element canister type
Cooling
Package mounted radiator
Exhaust
Exhaust flange outlet
Fuel
Primary fuel filter with integral water separator
Secondary fuel filter
Generator
Matched to the performance and output characteristics of Cat engines
IP23 Protection
Power Termination
Busbar
Control Panels
Engine cool-down timer
Frequency (Hz)
DC Volts
Volts (L-L & L-N)
Customizable screens
Limiter and exciter diode monitor
Power Factor (per phase & average)
1 Programmable relay outputs (Form C
Text alarm/event descriptions
Speed adjust
1 Programmable digital outputs
Overspeed - Emergency stop
4 Programmable relay outputs (Form A)
Emergency stop - Failure to start (overcrank)
Reverse reactive power (kVAr) (32RV)
6 Customer programmable digital inputs
Customer data link (Modbus RTU)
Emergency stop pushbutton
Environmental sealed front face
kW-hr (total) - kVAr-hr (total)
Cat Connect
Load histogram feature
RPM - DC volts
Failure to start (overcrank)
Serial annunciator module data link
Coolant temperature
Operating hours
kW (per phase, average & percent)
IVR includes:
Low coolant temperature
Reactive droop capability
Digital indication for:
KVAR/PF modes
Lamp test
Controls:
PLC functionality
0 True RMS AC metering, 3-phase, +/-2% accuracy
Oil pressure (psi, kPa or bar)
Generator mounted - rear facing
Amps (per phase & average)
Low coolant level
3 Analog inputs
Reverse power (kW) (32)
24 Volt DC operation
Over / under voltage (2 7/ 59)
Over / under frequency (81 o/u)
RFI suppression
3 Phase voltage sensing
EMCP 4.2B
Alarm acknowledge
Auto/start/stop control
kVA (per phase, average & percent)
Min / max exciter
Engine cycle crank
Low oil pressure
Accessory module data link
High coolant temperature
Warning / shutdown with common LED indication of shutdowns for:
Communications:
Overcurrent (50 / 51)
Number of I/O varies on options selected:
Programmable protective relaying functions:
Control Panel
EMCP 4 Genset Controller
Cooling System
Certified standard PGS provided
ATAAC - 3516E Package Radiators shipped installed
Exhaust System
Dry exhaust manifold
Flanged faced outlet(s)
Fuel System
Secondary fuel filters
Flexible fuel lines - shipped loose
Fuel cooler; not included with packages without radiator
Fuel priming pump
General
Paint - Caterpillar Yellow except rails and radiators gloss black
Right hand servicing
Flywheel and flywheel housing - SAE No. 00
SAE Standard rotation
Caterpillar yellow with high gloss black rails and radiator
Generator and Attachments
Busbar connections, right side extension box, bottom cable entry
3 Phase brushless, salient pole
Form wound - Permanent magnet
Anti condensation Space Heater
Busbar connections, top center mounted, top cable entry
6 Leads
Winding temperature detectors
Class H temperature rise at 40C ambient (125C prime / 150C standby)
Form wound
Internal excitation
NEMA Class H insulation
Low Voltage:
Random wound
High voltage:
Medium voltage:
Class H insulation, Class F temperature rise at 40C ambient (105C prime / 130C standby)
NEMA Class H insulation, Class H temperature rise at 40C ambient (125C prime / 150C standby
Permanent magnet
NEMA standard hole pattern
Governing System
ADEM A3
Literature
English
Lubrication System
Fumes disposal
Oil drain lines and valve
Lubricating oil
Integral lube oil cool
Oil filter, filler and dipstick
Gear type lube oil pump
Mounting System
Rails - engine / generator / radiator mounting
Anti-vibration mounts (shipped loose)
Rubber anti-vibration mounts (shipped loose)
Starting System
Battery and battery rack w/cables
24 Volt electric starting motor
Battery disconnect switch
45 Amp charging alternator
Exhaust
Exhaust mufflers <!--(except Tier 4)-->
Generator
Anti-condensation heater
Internal excitation (IE)
Permanent magnet excitation (PMG)
Oversize and premium generators
Power Termination
Circuit breakers, UL listed
Circuit breakers, IEC compliant
Control Panels
EMCP 4.2
EMCP 4.3
EMCP 4.4
Generator temperature monitoring & protection
Load share module
Digital I/O module
Remote monitoring software
EMCP 4.2
EMCP 4.3
EMCP 4.4
Generator temperature monitoring & protection
Load share module
Digital I/O module
Remote monitoring software
Mounting
Rubber anti-vibration mounts
Spring-type vibration isolator
IBC isolators
Rubber anti-vibration mounts
Spring-type vibration isolator
IBC isolators
Starting/Charging
Battery chargers
Oversize batteries
Jacket water heater
Heavy-duty starting system
Charging alternator
Air starting motor with control and silencer
Battery chargers
Oversize batteries
Jacket water heater
Heavy-duty starting system
Charging alternator
Air starting motor with control and silencer
General
The following options are based on regional and product configuration:
Seismic Certification per applicable building codes: IBC 2000, IBC 2003, IBC 2006, IBC 2009, CBC 2007
UL 2200 package
EU Certificate of Conformance (CE)
CSA Certification
EEC Declaration of Conformity
Enclosures: sound attenuated, weather protective
Automatic transfer switches (ATS)
Integral & sub-base fuel tanks
Integral & sub-base UL listed dual wall fuel tanks
30 Mins