Application
Ideal for asphalt patch cutting, road expansion join cuts, and utility trenching.
SW360B, 76 mm (3 in) Wheel Saws
Ideal for asphalt patch cutting, road expansion join cuts, and utility trenching.
GET A QUOTE
A sales engineer replies within one working day.
The Cat® SW360B, 76 mm (3 in) is built for reliable performance in the saws range, backed by Al-Bahar's regional service and support network.
- Maximum Cutting Depth
- 23.6 in
- Wheel Width
- 3.1 in
- Weight
- 3240.8 lb
- Overall Width
- 72.8 in
- Specifications
- Features
- Standard Equipment
Specifications
| Maximum Cutting Depth | 600 mm |
|---|---|
| Wheel Width | 80 mm |
| Weight | 1470 kg |
| Overall Width | 1850 mm |
| Overall Height | 1765 mm |
| Length | 2365 mm |
| Required Hydraulics | High Flow XPS |
| Optimal Hydraulic Flow | 125 L/min (33 gpm) |
| Optimal Hydraulic Pressure | 230 bar (3336 psi) |
| Motor Displacement | 1686 cm³/rev |
| Wheel Torque at Maximum Pressure | 7509 N·m |
| Wheel Speed at Maximum Flow | 74 rpm |
| Bit Speed at Maximum Flow | 360 m/min |
| Conical Bits - Per Wheel | 70 |
| Standard Bit Type | Concrete |
| Optional Bit Type | All Purpose |
| Side Shift Travel | 550 mm |
| Trench Cleaning Device | No |
| Drive Method | Piston motor/Planetary |
| Interface Type | Skid Steer Coupler |
Features
Direct Drive System
Direct drive system features a hydraulic piston pump motor to ensure maximum cutting rate and wheel torque for optimal production performance and efficiency.
Hydraulic Side-Shift and Depth Control
Hydraulic side-shift and depth control is standard on all models and is controlled from the operator's compartment. Hydraulic side-shift allows wheel positioning from center to the far right of center. This allows for cutting close to curbs, walls and other obstructions, and minimizes need to reposition the machine.
Trench Cleaning Device
The trench cleaning device is hydraulically operated from the operator's compartment. The blade can be controlled up and down to remove spoil and ensure a clean trench.
Deflector Plates
Deflector plates remove spoil from the machine's path for smooth operation. Spoil can be discharged left, right, or on both sides of the wheel saw with installation of included blanking plates.
Standard Equipment
No Standard Equipment are available for this product yet.