Emissions
IMO II - meets the International Maritime Organization's Regulation 13 of Revised Annex VI to the MARPOL Convention.
C32 IMO II Commercial Propulsion Engines
The C32 marine propulsion engine is available at ratings that meet IMO II emissions regulations. It has a separate circuit aftercooling system (SCAC) for A through C ratings, six ratings with Wide Operating Speed Range (WOSR) and extended oil change intervals. Other benefits include proven engine operating history and performance iron with thousands of validation testing hours for quality and durability. The C32 marine engine is supported by the extensive Cat global dealer network and Caterpillar's standard warranty.
GET A QUOTE
A sales engineer replies within one working day.
The Cat® C32 IMO II is built for reliable performance in the marine power systems range, backed by Al-Bahar's regional service and support network.
- Power Range
- 660-1450 bhp (492-1081 bkW)
- Speed Range
- 1600-2300 rpm
- Emissions
- IMO II, EU IW
- Aspiration
- TTA
- Specifications
- Features
- Standard Equipment
Specifications
| Power Range | 660-1450 bhp (492-1081 bkW) |
|---|
Features
Worldwide Support
Extensive service network of Cat Dealers and unparalleled service from authorized marine dealers
Durability
The C32 ACERT has proven engine operating history. It consists of performance iron with thousands of hours of validation testing for quality and durability.
Reliability
Backed by Caterpillar's standard warranty
Six Ratings with Wide Operating Speed Range (WOSR)
Excellent reserve power for acceleration, Ideal for applications requiring the engine to operate normally at more than one speed or load, Provides an alternative to torque converters, multi-speed transmissions, Controllable Pitch Propeller (CPP)
Standard Equipment
AIR INLET SYSTEM
-
Separate Circuit After-Cooled (SCAC
-
Air cleaner
-
Turbochargers, jacket water cooled
-
Turbochargers inlet, 152 mm (6 in) OD straight connection
CONTROL SYSTEM
-
Programmable Low Idle (550 - 750 rpm)
-
WOSR (Wide Operating Speed Range) available for - A, B, & C Ratings
-
Programmable High Idle Limit for WOSR Ratings
-
Electronic diagnostics and fault logging
-
Engine and transmission monitoring (speed, temperature, pressure)
COOLING SYSTEM
-
Separate Circuit After-Cooling (SCAC) for Heat Exchanged (HEX) & Keel cooled engines
-
Jacket Water (JW) and SCAC Heat Exchangers Shell & Tube for HEX cooled engines
-
SCAC pump, gear driven
-
Jacket water pump, gear driven
-
Sea water pump, bronze impeller, gear driven, for HEX cooled engines only
EXHAUST SYSTEM
-
4 Bolt 130 mm (5.12 in) diameter flanged outlet
-
Water-cooled exhaust manifold & turbocharger
FLYWHEELS & FLYWHEEL HOUSINGS
-
SAE standard rotation (CCW facing exciter end)
-
Flywheel Housing: SAE No. 0, Flywheel: 18 inch, 136 teeth
FUEL SYSTEM
-
Duplex Fuel Filters, Spin-on, RH & LH service
-
Fuel connections size:Supply JIC 37 Deg -10 (7/8-14), Return JIC 37 Deg -8 (3/4-16)
-
Plate Type Fuel Cooler installed behind Aftercooler Shunt Tank
-
Fuel transfer pump, gear driven
-
Manual fuel priming pump
LUBE SYSTEM
-
Simplex Oil Filters, RH or LH service
-
Deep sump oil pan
-
RH or LH service oil filler locations
-
RH or LH service dipstick
-
Oil pump, gear driven
MOUNTING SYSTEM
-
Front support - adjustable
POWER TAKE-OFFS
-
Front Poly-V groove pulley (Quantity 1) for auxiliary drives
GENERAL
-
Common electrical bonding point
-
Engine does not ship with zinc components
Optional Equipment
Air Inlet Systems
-
Air Inlet Cleaner
-
Air Inlet Adapter
Charging Systems
-
Battery Charger
-
Charging Alternators
-
Ammeter
Cooling System
-
Marine Gear/Transmission Oil Coolers
-
Connections
Exhaust System
-
Dual Elbow
-
Flexible Fitting
-
Dual Muffler
-
Muffler Spark Arresting
-
Flange
Fuel System
-
Water Separator
Instrumentation
-
OEM Wiring Harness
-
Engine to Engine Harness
-
Instrument Panels
-
Exhaust Temperature Sensors
-
Wiring Harness
Lube System
-
Transmission Oil Cooler
-
Manual Sump Pump
-
Duplex Oil Filters
Protection System
-
Fuel and Oil Shielding
Starting System
-
Air Starting Motor
-
Air Start Accessories
-
Electric Starting Motors - Single 24 Volt
-
Starting Aids
-
Battery Sets - 24 Volt - Dry
Packing
-
Engine Protective Cover
-
Export Packing
-
Storage Preservation
Mounting System
-
Front Support
-
Adapter Kits
-
Isolator Mounts
Power Take-Offs
-
Front Enclosed Clutches
-
Rear Hydraulic Pump Drive
GENERAL
-
Fumes Disposal
CONTROL SYSTEM
-
Instrument Panels
-
CATERPILLAR ALARM AND PROTECTION
-
Fuel and Oil Shielding