Cat Generator Set Package
- Cat generator set packages have been fully prototype tested
- Accepts 100% block load in one step and meets NFPA 110 loading requirements
- Conform to ISO 8528-5 steady state and transient response requirements
3512B (50 Hz) 1320 -1625 kVA Diesel Generator Sets
Producing reliable power from 1320 to 1625 kVA at 50 Hz, our 3512B diesel generator sets are made to meet your mission critical, continuous, standby and prime applications. We've designed each to ISO 8528-5 transient response requirements and to accept 100% rated load in one step. Generator sets offer both low fuel consumption and low emission systems.
GET A QUOTE
A sales engineer replies within one working day.
3512B (50 HZ) 1320-1875 kVA Diesel Generator models offer a great degree of customization for mission critical, continuous, standby and prime applications.
- Standby Rating
- 1625/1600/1500 kVA
- Prime Power Rating
- 1500/1360 kVA
- Emissions/Fuel Strategy
- Low Fuel, Low Emissions
- Voltage
- 380 to 415 Volts
- Specifications
- Features
- Standard Equipment
Specifications
| Standby Rating | 1625/1600/1500 kVA |
|---|---|
| Prime Power Rating | 1500/1360 kVA |
| Emissions/Fuel Strategy | Low Fuel, Low Emissions |
| Voltage | 380 to 415 Volts |
| Frequency | 50 Hz |
| Speed | 1500 rpm |
| Duty Cycle | Standby, Mission Critical, Prime |
| Maximum Rating | 1625 kVA |
| Minimum Rating | 1320 kVA |
Features
Cat Diesel Engine
- Reliable, rugged, durable design
- Field-proven in thousands of applications worldwide
- Four-stroke-cycle diesel engine combines consistent performance and excellent fuel economy with minimum weight
SR5 Alternator
- Superior motor starting capability minimizes need for oversizing alternator
- Designed to match performance and output characteristics of Cat diesel engines
- Robust Class H insulation
Cat ECS Control Panel
- User-friendly interface and navigation
- Scalable system to meet a wide range of installation requirement
- Expansion modules and site-specific programming for specific customer requirements
Cooling System
- Designed to operate in standard ambient temperatures up to 50°C (122°F)
- Contact your Cat Dealer for specific ambient and altitude capabilities
Standard Equipment
Air Inlet System
-
Aingle element canister type air cleaner with service indicator
Air Inlet
-
Air cleaner
Cooling
-
Package mounted radiator (except C175)
Control Panel
-
Emergency stop button
-
Programmable protective relaying functions:
-
Over/under voltage (27 / 59)
-
kVAr (per phase, average & percent)
-
kVA (per phase, average & percent)
Exhaust
-
Exhaust flange outlet
Fuel
-
Secondary fuel filters
-
Primary fuel filter with integral water separator
-
Fuel priming pump
Control System
-
Engine cool-down timer
-
DC volts
-
True RMS AC metering, 3-phase, +/-2% accuracy
-
High coolant temperature
-
Coolant temperature
Generator
-
IP23 Protection
-
Matched to the performance and output characteristics of Cat engines
Power Termination
-
Busbar
Generator System
-
Class H temperature rise at 40C ambient
-
3 phase brushless, Salient pole
-
6 Lead
-
Winding temperature detectors
-
NEMA Class H insulation
Literature
-
Parts book
-
Operation & Maintenance Manual
Cooling System
-
Caterpillar extended life coolant. (Not included with packages without radiator, installed SF44CTS, shipped loose radiators or heat exchangers)
-
JWAC
-
Coolant level sensors (Not included with packages without radiator)
-
Coolant drain line with valve
-
Radiator fan and fan drive
Exhaust System
-
Dry exhaust manifold
-
Flanged faced outlet(s)
Fuel System
-
Fuel priming pump
-
Secondary fuel filters
-
Fuel cooler; not included with packages without radiator
-
Flexible fuel lines - shipped loose
Generators and Attachments
-
Note: 1800 Frames are form wound, permanent magnet excitation (PMG), with winding temp detectors
-
3 Phase voltage sensing
-
RFI suppression
-
Class H temperature rise at 40C ambient (125C prime / 150C standby)
-
Min / max exciter limiter
Governing System
-
Woodward 2301A isochronous governor
Lube System
-
Lubricating oil
-
Gear type lube oil pump
-
Integral lube Oil cooler
-
Oil filter, filler and dipstick
-
Fumes disposal
Mounting System
-
Rails - Engine/generator/radiator mounting
-
Rubber anti-vibration mounts - shipped loose
Starting / Charging System
-
Battery disconnect switch
-
Battery and battery rack w/cables
-
24 Volt electric starting motor
General
-
SAE standard rotation
-
Flywheel and Flywheel housing-SAE No. 00
-
RH service
-
Paint - Caterpillar yellow with high gloss black rails & radiator
Optional Equipment
Air Inlet System
-
Air inlet protection
-
Remote air inlet adaptors
-
Dual element air cleaners
Exhaust
-
Exhaust mufflers
Generator
-
Anti-condensation heater
-
Internal excitation (IE)
-
Permanent magnet excitation (PMG)
-
Oversize and premium generators
Circuit breakers
-
Cable entry options
-
2000, 2500, 3200 and 4000 Amp, 4 pole, IEC rated Circuit breakers
-
Busbar connections
-
Center posts busbars
-
Controls packaging - Enclosures
Power Termination
-
Circuit breakers, UL listed
-
Circuit breakers, IEC compliant
Control Panels
-
Annunciator modules
-
Customer connection mounting locations
-
Remote speed adjust
-
Local PC monitoring
-
Generator temperature monitoring
Mounting
-
Rubber anti-vibration mounts
-
IBC isolators
-
Spring type vibration isolators
Starting/Charging
-
Oversize batteries
-
Air starting motor with control and silencer
-
Jacket water heater
-
Heavy duty starting system
-
Charging alternator
Cooling System
-
Water level switch gauges
-
Optional radiator arrangements
-
Heat exchangers
European Certifications
-
European Union certification
-
EU Declaration of Conformity
-
European Directive genset, DoI (Declaration of Incorporation)
-
Eurasian Conformity (EAC) mark
Exhaust System
-
Mufflers
-
Muffler mounting kits
-
Through-wall installation kit
-
Flexible fittings
Fuel System
-
Primary fuel filter
Generators and Attachments
-
Generator conversion
-
1500 RPM, 380/400/415volts @ 50 Hz, 3 phase, random wound, Permanent magnet excitation (PMG), No. of leads = 6, pitch= 0.6667
-
1500 RPM, 380/400/415volts @ 50 Hz, 3 phase, Form wound, Permanent magnet excitation (PMG), No. of leads = 6, pitch= 0.6667
-
1500 RPM, 380/400/415volts @ 50 Hz, 3 phase, random wound, Internal excitation (IE), No. of leads = 6, pitch= 0.6667
-
Space heater
Instrumentation
-
Pyrometer and thermocouples
Lube System
-
Oil level reg-1 shallow pan
-
Electric prelube pumps
-
Manual prelube sump pumps
Mounting System
-
IBC vibration isolators
-
Spring type vibration isolators
Protection System
-
Explosion relief valves
Special Tests / Reports
-
PGS Test report @ 0.80 power factor
-
Neutral ground-LV
-
IBC seismic Certifications
-
PGS Test report @ 1.0 power factor
-
Neutral grounding connection
Starting / Charging System
-
Oversize battery set
-
Jacket water heaters
-
10 Amp Battery chargers
-
Ether starting aid
-
24 Volt dual electric starting motor
General
-
Engine barring group