Cat Generator Set Package
- Cat generator set packages have been fully prototype tested
- Accepts 100% block load in one step and meets NFPA 110 loading requirements
- Conform to ISO 8528-5 steady state and transient response requirements
DE600S GC Diesel Generator Sets
Producing reliable power 600 kW at 60 Hz, our DE600S GC generator set powerd by C15 diesel engine designed to ISO 8528-5 transient response requirements.
GET A QUOTE
A sales engineer replies within one working day.
DE600S GC (60 Hz), 600 kW Diesel Generator is developed with specific power needs in mind, allowing a wide range of customization to fit your use.
- Standby Rating
- 600 ekW
- Frequency
- 60 Hz
- Emissions/Fuel Strategy
- Low BSFC
- Voltage
- 220 to 480 Volts
- Specifications
- Features
- Standard Equipment
Specifications
| Standby Rating | 600 ekW |
|---|---|
| Frequency | 60 Hz |
| Emissions/Fuel Strategy | Low BSFC |
| Voltage | 220 to 480 Volts |
| Speed | 1800 RPM |
| Duty Cycle | Standby |
Features
Cat Diesel Engine
- Reliable, rugged, durable design
- Field-proven in thousands of applications worldwide
- Four-stroke-cycle diesel engine combines consistent performance and excellent fuel economy with minimum weight
A-Frame Alternator
- Superior motor starting capability minimizes need for oversizing alternator
- Designed to match performance and output characteristics of Cat diesel engines
- Robust Class H insulation
GCCP1.2 Control Panel
- User-friendly interface and navigation
- Scalable system to meet a wide range of installation requirement
- Expansion modules and site-specific programming for specific customer requirements
Cooling System
- Designed to operate in standard ambient temperatures up to 55°C (131°F)
- Contact your Cat Dealer for specific ambient and altitude capabilities
Standard Equipment
Engine
-
Cat® C15 Inline 6 cylinder, 4 stroke diesel
Air Inlet
-
Air cleaner
Control Panels
-
GCCP 1.1
Governor
-
Mechanical governor
Cooling
-
Package mounted radiator
Alternator
-
A Frame standard alternator
Control Panel
-
EMCP 4 Genset controller
Fuel Storage
-
Single wall 8 hour fuel tank
Cooling System
-
Radiator and cooling fan with guards
-
Fan drive, battery charging alternator drive
Fuel
-
Fuel priming pump
-
Primary fuel filter with integral water separator
-
Secondary fuel filters
Exhaust
-
Exhaust flange outlet
Electrical Options
-
3 Pole Circuit breaker
-
Neutral earth link
-
24 Volt battery with rack and cables
Air inlet system
-
Air cleaner; light duty with disposable element
Lube system
-
Lubricating oil
-
Oil drain line with valve
Generator
-
Matched to the performance and output characteristics of Cat engines
-
IP23 Protection
-
Load adjustment module provides engine relief upon load impact and improves load acceptance and recovery time
Mounting system
-
Captive linear vibration isolators
-
Lifting provision and drag points
General
-
Engine and alternator pre paint, Caterpillar yellow
-
Engine and alternator pre paint, Caterpillar yellow
-
Paint - Caterpillar yellow except rails and radiators gloss black
Power Termination
-
Busbar
Generator and Attachments
-
Power center, IP22
-
Optional LC Frame generator - IP23 Protection
-
Mandatory option circuit breaker, IEC, 3 pole, mounted in power centre
-
Integrated voltage regulator (IVR)
-
Segregated low voltage (AC/DC) wiring panel
Mounting
-
Rubber vibration isolators
Governing System
-
Cat electronic governor (ADEM A4).
Lube System
-
Oil drain valves
-
Oil cooler
Mounting System
-
Captive linear vibration isolators between base and engine-generator includes lifting provisions and termination points for coolant and lube oil drain lines
Starting/Charging
-
24 volt starting motor
-
Batteries
-
24 Volt battery with rack and cables
Optional Equipment
Exhaust
-
Industrial, residential, critical mufflers
Control panel
-
Speed and Voltage adjust potentiometers
-
PLG 4G/3G/Ethernet
-
Annunciator
-
Emergency E-Stop
Enclosure
-
Cat GC enclosure
Generator
-
Oversize and premium generators
-
Anti-condensation heater
-
Excitation: [ ] Permanent magnet excitation (PMG) Excited (PM) [ ] Internally Excited (IE)
Power Termination
-
Circuit breakers, UL listed
-
Circuit breakers, IEC compliant
Electrical Options
-
4 Pole Circuit breaker
-
Auxiliary contacts
-
Padlockable circuit breaker
-
Battery charger
-
Wet battery
Alternator
-
Space heater
-
AVR
Fuel System
-
Dual wall 8 hour fuel tank
-
Single wall 8 hour fuel tank with spill containment
-
Low fuel level shutdown
-
Low and high fuel level alarms
-
Manual fuel transfer pump
Starting/Charging
-
Jacket water heater
-
Heavy duty starting system
-
Battery chargers
-
Charging alternator
-
Oversize batteries
Air inlet system
-
Single stage air filter
-
Dual element air filter
Certifications
-
EU Certificate of Conformance (CE)
-
EAC Certification
Extended service coverage
-
3, 4, 5 and 10 Years
General
-
The following options are based on regional and product configuration:
-
Single or dual wall integral fuel tanks
-
Narrow, wide or skid base
-
Seismic Certification per applicable building codes: IBC 2000, IBC 2003, IBC 2006, IBC 2009, CBC 2007
-
EU Certificate of Conformance (CE)
Enclosures
-
High ambient sound attenuated enclosures
Exhaust System
-
Industrial silencer
-
10 dBA Attenuation silencer
-
Flexible exhaust fittings
-
6 and 8 inch elbow kit
-
End in/end out mufflers - 10, 25 and 35 dBA attenuation
Generator and Attachments
-
Oversize A Frame generator
-
Permanent magnet excitation (PMG) generator
-
Oversize LC frame generator
-
Ingress protection
-
LC frame generator
Lube System
-
Manual sump pump
Mounting System
-
Narrow skid base - replaces standard fuel tank base
Special Test / Reports
-
PGS Test report @ 1.0 power factor
-
PGS Test report @ 0.8 power factor
Starting / Charging System
-
5 Amp single Battery charger
-
Battery disconnect switch
-
Jacket water heater