Cat Generator Set Package
- Cat generator set packages have been fully prototype tested
- Accepts 100% block load in one step and meets NFPA 110 loading requirements
- Conform to ISO 8528-5 steady state and transient response requirements
C2.2 (50 Hz) Diesel Generator Sets
Producing reliable power from 13.0 to 22.0 kVA at 50 Hz, our C2.2 diesel generator sets designed to ISO 8528-5 transient response requirements. All C2.2 generator sets are R96/EUIIIa equivalent emissions compliant.
GET A QUOTE
A sales engineer replies within one working day.
C2.2 (50 HZ) 13-22 kVA Diesel Generator models are designed with customer demands in mind. A broad range of accessories allows you to find your perfect fit.
- Standby Rating
- 14/16.5/18/22 kVA
- Prime Power Rating
- 13/15/16.5/20 kVA
- Emissions/Fuel Strategy
- EU Stage IIIA
- Voltage
- 110 to 415 Volts
- Specifications
- Features
- Standard Equipment
Specifications
| Standby Rating | 14/16.5/18/22 kVA |
|---|---|
| Prime Power Rating | 13/15/16.5/20 kVA |
| Emissions/Fuel Strategy | EU Stage IIIA |
| Voltage | 110 to 415 Volts |
| Frequency | 50 Hz |
| Speed | 1500 rpm |
| Duty Cycle | Standby, Prime |
Features
Cat Diesel Engine
- Reliable, rugged, durable design
- Field-proven in thousands of applications worldwide
- Four-stroke-cycle diesel engine combines consistent performance and excellent fuel economy with minimum weight
M-Frame Alternator
- Superior motor starting capability minimizes need for oversizing alternator
- Designed to match performance and output characteristics of Cat diesel engines
- Robust Class H insulation
GCCP 1.3 Control Panel
- User-friendly interface and navigation
- Scalable system to meet a wide range of installation requirement
- Expansion modules and site-specific programming for specific customer requirements
- Image may not be a representative of actual product
Cooling System
- Designed to operate in standard ambient temperatures up to 55°C (131°F)
- Contact your Cat Dealer for specific ambient and altitude capabilities
Standard Equipment
Control Panel
-
GCCP 1.3
Air Inlet System
-
Air cleaner; light duty with disposable element
Cooling System
-
Radiator and cooling fan with guards
-
Caterpillar extended life coolant
-
Coolant drain line with valve
-
Fan drive, battery charging alternator drive
Fuel System
-
Standard open set fuel tank/base supplied
-
Base, formed steel with single wall integral 8-hour fuel tank
Exhaust System
-
Stub pipe, gaskets, raincap & SAE exhaust flange for customer use - shipped loose
Generators and Generator Attachments
-
Voltage regulator (single phase sensing)
-
Segregated low voltage (AC/DC) wiring panel
-
Tower panel, IP22, bottom cable entry
-
IP23 Protection
-
Circuit breaker, IEC, 3 pole, mounted in tower panel
Governing System
-
Mechanical governing system
Lube System
-
Oil drain line with valve
-
Lubricating oil
Mounting System
-
Captive linear vibration isolators between base and engine-generator
-
includes lifting provisions and termination points for coolant
Starting / Charging System
-
12 Volt battery with rack and cables
General
-
Engine and alternator pre-paint, Caterpillar yellow
Optional Equipment
Alternator Options
-
Coastal insulation protection
Certificates
-
European upgrade to STD set for CE certificate
-
Global certification for CIS
Circuit breakers
-
Padlockable breaker device
-
4 Pole Circuit breaker
Control Panel Options
-
Emergency stop with key
-
Volt free contacts for common alarm
-
Volt free contacts for genset running
-
GCCP 1.3
-
Battery charger
Cooling System
-
Coolant heater
Enclosures
-
Sound attenuated enclosure (GALV)
-
Single point lift for enclosure
-
Aluminium
-
Steel
Fuel System
-
Low fuel level alarm
Mounting Options
-
Industrial silencer removal
-
Silencer installation kit
-
Battery removal
Special Test and Inspection
-
PGS Test report @ 1.0 power factor
General
-
Packing case - compact set
-
Packing case - canopied set
-
Radiator stone guard