Cat Generator Set Package
- Cat generator set packages have been fully prototype tested
- Accepts 100% block load in one step and meetsNFPA 110 loading requirements
- Conform to ISO 8528-5 steady state and transient response requirements
C1.1 (50 Hz) Diesel Generator Sets
Producing reliable power from 6.8 to 9.5 kVA at 50 Hz, our C1.1 diesel generator sets designed to ISO 8528-5 transient response requirements. All C1.1 generator sets are R96/EUIIIa equivalent emissions compliant.
GET A QUOTE
A sales engineer replies within one working day.
C1.1 (50 HZ) 6.8-9.5 kVA Diesel Generator models are designed to reliably meet your prime and standby needs.
- Standby Rating
- 7.5/9.5 kVA
- Prime Power Rating
- 6.8/8.5 kVA
- Emissions/Fuel Strategy
- EU Stage IIIA
- Voltage
- 110 to 415 Volts
- Specifications
- Features
- Standard Equipment
Specifications
| Standby Rating | 7.5/9.5 kVA |
|---|---|
| Prime Power Rating | 6.8/8.5 kVA |
| Emissions/Fuel Strategy | EU Stage IIIA |
| Voltage | 110 to 415 Volts |
| Frequency | 50 Hz |
| Speed | 1500 rpm |
| Duty Cycle | Standby, Prime |
Features
Cat Diesel Engine
- Reliable, rugged, durable design
- Field-proven in thousands of applications worldwide
- Four-stroke-cycle diesel engine combines consistent performance and excellent fuel economy with minimum weight
M-Frame Alternator
- Superior motor starting capability minimizes need for oversizing alternator
- Designed to match performance and output characteristics of Cat diesel engines
- Robust Class H insulation
GCCP 1.3 Control Panel
- User-friendly interface and navigation
- Scalable system to meet a wide range of installation requirement
- Expansion modules and site-specific programming for specific customer requirements
- Image may not be a representative of actual product
Cooling System
- Designed to operate in standard ambient temperatures up to 55°C (131°F)
- Contact your Cat Dealer for specific ambient and altitude capabilities
Standard Equipment
Air Inlet System
-
Air cleaner; light duty with disposable element
Control Panel
-
GCCP1.3 Control panel
Cooling System
-
Caterpillar extended life coolant
-
Coolant drain line with valve
-
Fan drive, battery charging alternator drive
-
Radiator and cooling fan with guards
Exhaust System
-
Stub pipe, gaskets, raincap & SAE exhaust flange for customer use - shipped loose
Fuel System
-
Base, formed steel with single wall integral 8-hour fuel tank
-
Standard open set fuel tank/base supplied
General
-
Engine and alternator pre-paint, Caterpillar yellow
Generators and Generator Attachments
-
12 Leads
-
Circuit breaker, IEC, 3 pole, mounted in tower panel
-
IP23 Protection
-
Segregated low voltage (AC/DC) wiring panel
-
Tower panel, IP22, bottom cable entry
Governing System
-
Mechanical governing system
Lube System
-
Lubricating oil
-
Oil drain line with valve
Mounting System
-
Anti-vibration mounts
-
Captive linear vibration isolators between base and engine-generator
-
Includes lifting provisions and termination points for coolant
-
Skidbase as standard
Starting / Charging System
-
12 Volt battery with rack and cables
Optional Equipment
Alternator Options
-
Coastal insulation protection
Certificates
-
European upgrade to STD set for CE certificate
-
Global certification for CIS
Circuit breakers
-
4 Pole Circuit breaker
-
Padlockable breaker device
Control Panel
-
Battery charger
-
Emergency stop with key
Cooling System
-
Coolant heater
Enclosures
-
Single point lift for enclosure
-
Sound attenuated enclosure (GALV)
Fuel System
-
Low fuel level alarm
General
-
Packing case - canopied set
-
Packing case - compact set
-
Radiator stone guard
Mounting Options
-
Battery removal
-
Industrial silencer removal
-
Silencer installation kit
Special Test and Inspection
-
PGS Test report @ 1.0 power factor