6015B Hydraulic Mining Shovels

The new Cat 6015B Hydraulic Shovel meets your need to move more material at a lower cost, so you can achieve production targets, deliver on your commitments, meet deadlines – and maximize your profitability. Load more, make more.

GET A QUOTE

A sales engineer replies within one working day.

Request Quote

The Cat® 6015B is built for reliable performance in the hydraulic mining shovels range, backed by Al-Bahar's regional service and support network.

Engine Output - SAE J1995: 813 hp
Bucket Payload: 16.1 ton (US)
Operating Weight: 154.3 ton (US)
Note: Specifications shown above apply to Backhoe configuration. A Frontless configuration is also available.

Download Brochure

Specifications
Features
Standard Equipment

General specifications
Engine Output - SAE J1995	606 kW
Bucket Payload	14.6 t
Operating Weight	140 t
Note	Specifications shown above apply to Backhoe configuration. A Frontless configuration is also available.

Engine - U.S. EPA Tier 4 Final specifications
Engine Model	Cat® C27
Gross Power - SAE J1995	606 kW
Net Power - SAE J1349	556 kW

Engine - Cat C27 with Tier 4 Final Emission Standards specifications
Number of Cylinders	12
Bore	137.2 mm
Stroke	152.4 mm
Displacement	27 l
Maximum Altitude - Without Deration - Above Sea Level	3048 m
Net Power - SAE J1349	556 kW (746 hp 1,800 min-1)
Gross Power - SAE J1995	606 kW (813 hp 1,800 min-1)

Engine - Equivalent to U.S. EPA Tier 2 specifications
Engine Model	Cat® C27
Gross Power - SAE J1995	606 kW
Net Power - SAE J1349	556 kW

Engine - Cat C27 with Tier 1 or Tier 2 Equivalent Emission Standards specifications
Number of Cylinders	12
Bore	137.2 mm
Stroke	152.4 mm
Displacement	27 l
Aspiration	Turbocharged and aftercooled
Maximum Altitude - Without Deration - Above Sea Level	4420 m
Net Power - SAE J1349	556 kW (746 hp 1,800 min-1)
Gross Power - SAE J1995	606 kW (813 hp 1,800 min-1)

Engine specifications
Emissions	U.S. EPA Tier 4 Final, Tier 2 Equivalent or Tier 1 Equivalent
Gross Power - SAE J1995:2014	606 kW
Net Power - SAE J1349:2011	556 kW
Engine Model	Cat® C27

Operating Weights - Backhoe specifications
Operating Weight	140 t

Weights specifications
Ground Pressure	16.3 N/cm²
Note	Operating weight includes: 700 mm (28 in) track shoes, 7.6 m (24 ft 11 in) boom, 3.4 m (11 ft 2 in) stick
Operating Weight	140000 kg

Track specifications
Standard	700 mm
Wide	900 mm
Extra Wide	1000 mm
Number of Shoes - Each Side	46
Number of Track Rollers - Each Side	9
Number of Carrier Rollers - Each Side	3
Track Pads	Double grouser

Drive specifications
Travel Speed - Two Stages - 1st Stage - Maximum	2.3 km/h
Travel Speed - Two Stages - 2nd Stage - Maximum	3.3 km/h
Maximum Drawbar Pull - Forward	858 kN
Maximum Drawbar Pull - Reverse	983 kN
Gradeability - Travel Drives	Approximately 42%
Hydraulic Track Tensioning	With accumulator

Service Refill Capacities specifications
Fuel Tank	1700 l
Cooling System	165 l
Engine Oil	87 l
Swing Drive	9 l
Hydraulic System - Including Tank	1752 l
Hydraulic Tank	956 l
Grease Tank	68 l

Electrical System specifications
System Voltage	24V
Batteries	4 × 200Ah (12V each)
Alternator Rating	150A (24V)
Components (1)	Emergency stop in cabin, engine module, pump room and on service station accessible from ground level
Components (2)	All around lighting
Components (4)	Five (5) lights for front
Components (9)	One (1) beacon light on cabin roof
Components (8)	One (1) light for machine deck/service
Components (6)	One (1) light for right side
Components (3)	Four (4) lights on attachment
Components (5)	Two (2) lights for left side
Components (7)	Two (2) lights for rear end

Hydraulic System specifications
Main Pumps - Maximum Pressure - Travel	320 bar
Main Pumps - Maximum Pressure - Attachment	320 bar
Main Pumps - Maximum Total Oil Flow	1544 L/min
Main Pumps	3 × variable swash plate pumps
Swing Pump - Maximum Flow - Swing	479 L/min
Swing Pump	1 × variable swash plate pump
Swing Pump - Maximum Pressure - Swing	365 bar
Pilot Pump - Maximum Pressure, Pilot	95 bar
Pilot Pump	1 × gear pump
Pilot Pump - Maximum Flow, Pilot	153 L/min
Engine Fan Pump - Maximum Pressure, Engine Fan	220 bar
Engine Fan Pump	1 × variable swash plate pump
Engine Fan Pump - Maximum Flow, Engine Fan	201 L/min
Hydraulic Fan Pump - Maximum Flow, Hydraulic Fan	86 L/min
Hydraulic Fan Pump	1 × variable swash plate pump
Hydraulic Fan Pump - Maximum Pressure, Hydraulic Fan	135 bar
Hydraulic Oil Cooling - Diameter of Fan	1016 mm
Hydraulic Oil Cooling - Maximum Flow	1075 L/min
Filters (1)	Full-flow high-pressure filters (200 μm) for main pumps
Filters (2)	Full-flow filters (20 μm) for complete return circuit
Filters (3)	Pressure filters (16 μm) for servo circuit
Filters (5)	Swing charge filter (15 μm)
Filters (6)	Pump case return screens (125 μm)
Filters (4)	Full-flow filters (6 μm) for engine cooling return circuit

Swing System specifications
Swing Drive	Two (2) compact planetary transmissions with axial piston motors
Parking Brake	Wet multiple disc brake, spring-loaded/hydraulically released
Maximum Swing Speed	4.9 r/min
Swing Ring	Cross roller bearing with sealed internal gearing
Features (1)	Closed-loop swing circuit with speed control
Features (2)	Hydraulic braking of swing motion when control is returned to neutral position or by counteracting control for stronger braking
Features (3)	All raceways and the internal gearing of swing ring supplied by automatic central lubrication system

Centralized Service Area specifications
Feature	Accessible from ground level
Equipped With (1)	Emergency stop
Equipped With (2)	Quick couplings for: – Diesel fuel – Grease

Undercarriage specifications
Travel Speed - Two Stages - 1st Stage - Maximum	2.3 km/h
Travel Speed - Two Stages - 2nd Stage - Maximum	3.3 km/h
Maximum Drawbar Pull - Forward	858 kN
Maximum Drawbar Pull - Reverse	983 kN
Gradeability - Travel Drives	Approximately 42%
Hydraulic Track Tensioning	With accumulator
Number of Shoes - Each Side	46
Number of Track Rollers - Each Side	9
Number of Carrier Rollers - Each Side	3
Components (2)	Chain links connected by hardened pins and bushings
Components (5)	Fully hydraulic self-adjusting track tensioning system with accumulator
Components (7)	Audible travel alarm
Components (3)	Cat D11 Track-Type Tractor links
Components (6)	Automatic hydraulic retarder valve to prevent overspeed on downhill travel
Components (1)	Forged double-grouser track pads
Components (4)	All running surfaces of sprockets, idlers, rollers and track chain links hardened

Operator's Cab specifications
Components (7)	Beverage holder
Components (4)	Glass-breaking safety hammer
Components (19)	Laminated glass front upper window and tempered other windows
Components (14)	Adjustable armrest
Components (9)	AM/FM radio
Components (17)	Travel control pedals with removable hand levers
Components (15)	Height-adjustable joystick consoles
Components (10)	Radio with MP3 auxiliary audio port
Components (16)	Neutral lever (lock out) for all controls
Components (1)	Pressurized operator station with positive filtration
Components (2)	Mirror package
Components (11)	Two stereo speakers
Components (12)	Storage shelf suitable for lunch or toolbox
Components (8)	Literature holder
Components (18)	Two power outlets, 10 amp (total)
Components (6)	Coat hook
Components (5)	Removable lower windshield with in cab storage bracket
Components (13)	Color LCD display with warning, filter/fluid change, and working hour information
Components (3)	Sliding upper door window (left-hand cab door)

Automatic Lubrication System specifications
Capacity - Grease Barrel	68 l
Type (2)	Grease is automatically applied to all attachment pivot points (except bucket linkage) and slew bearing
Type (3)	Standard grease reel on machine for bucket linkage
Type (1)	Central bank lubrication system
Type (4)	Grease refill service point accessible from ground

Attachments specifications
Type (1)	Boom and stick torsion-resistant with welded box design
Type (2)	High-tensile steel with solid steel castings at pivot areas
Type (3)	Boom and stick stress-relieved after welding
Type (4)	Float valve for boom down function
Buckets Equipped With	– Special liner material covering main wear areas inside and outside – Lip shrouds – Wing shrouds – Heel shrouds

Backhoe Attachment (BH) - Working Range specifications
Maximum Digging Depth	7.9 m
Maximum Digging Reach	13.9 m
Maximum Digging Height	13.2 m
Maximum Dump Height	8.7 m

Backhoe Attachment (BH) - Digging Forces specifications
Bucket Digging Force - SAE	501 kN
Stick Digging Force - SAE	439 kN
Bucket Digging Force - ISO	586 kN
Stick Digging Force - ISO	458 kN

Backhoe Attachment (BH) - Backhoe specifications
Tooth System	Cat C70 penetration tip with CapSure lock
Capacity 1:1	8.1 m³
Total Width	2682 mm
Number of Teeth	5
Weight - Including Standard Wear Package	7528 kg
Maximum Material Density - Loose	1.8 t/m³

Operating Specifications specifications
Bucket Payload	14.6 t
Operating Weight	140 t

Bucket specifications
Standard Bucket Capacity - Backhoe (Heaped 1:1)	8.1 m³

The Most Powerful Engine in Its Class, Translating to Faster Cycle Times, and Greater Productivity

Offering 606 kW (813 hp) of rated power via its single C27 engine, the 6015B is capable of providing class-leading cycle times and unmatched productivity.

Reliable Cat C27 ACERT Engine

The Cat C27 engine delivers power and reliability, ensuring top performance, high productivity, and exceptional service life. Its durability has been proven in heavy construction, quarry/aggregate, and mining applications alike; the versatility required of a 100 tonne (110 ton) hydraulic shovel.

Engine Technology

The development of our new engine technology began with the search for a better way to reduce diesel engine emissions, and culminated in a revolutionary engine design breakthrough that burns fuel more precisely than ever before. Lower combustion temperatures reduce emissions and prolong the life of lighter, more power-dense engine platforms. It also varies the injection timing based on factors like engine load and speed for optimum performance under a wide range of operating conditions, including mining.

Worldwide Cat Engine Support

Our engines are only as good as the service and support that stand behind them. Highly trained and experienced service technicians at your local Cat dealership are ready with whatever you need, wherever and whenever you need it. They know the Cat C27 ACERT engine inside and out, so they can promptly diagnose issues and keep your 6015B running at peak performance.

Greater Profit Potential Via Optimized Match with Cat Off-Highway Trucks

Standard equipped with a large, 8.1 m3 (10.6 yd3) bucket, the 6015B is designed to optimally pass popular Cat 773, 775, and 777 trucks, at 4, 5, and 7 passes, respectively. This is a one pass advantage over leading standard equipped shovels in its class. When consistently achieved, the result is more material moved, and greater profit.

No Standard Equipment are available for this product yet.

Optional Equipment

UNDERCARRIAGE

Track guards – full
Track guards – center
Track width: – Standard – 700 mm (28 in) – Wide – 900 mm (36 in) – Extra Wide – 1000 mm (39 in)

COLD WEATHER OPTIONS

Starting aid – cold weather
120V or 240V engine heater
Fuel heater
Heated cab mirror
Low temperature lubricants

SUPERSTRUCTURE

Copper Mesabi or aluminum bar plate engine cooling packages
LED working lights
Powered access stairway
Camera system

CAB

Windshield guard (FOGS)
Product Link

ATTACHMENT

3.4 m (11 ft 2 in) or 4.1 (13 ft 5 in) stick

BUCKETS

Additional buckets available, based on application, through your local Cat dealer

Company

Material Handling

Rental Products

Used Products

Other Products

Rental Products

Cat® Parts

Contact Us