7395 Electric Rope Shovels

7395 Electric Rope Shovel

A sales engineer replies within one working day.

The Cat® 7395 is built for reliable performance in the electric rope shovels range, backed by Al-Bahar's regional service and support network.

Download Brochure

Dimensions specifications
Dipper Payload	64 t
Dipper Capacity	20.6-55.8 m3 (27-73 yd3)
Note	Dependent on application and material density.

Weights specifications
Working Weight - With Dipper and Standard Links	1202927 kg
Ballast - Furnished By Customer	260362 kg
Note (1)	These weights will vary slightly depending upon dipper and optional equipment selection.
Note (2)	All specifications are based on a 24 m3 (32 yd3) dipper and standard 213.4 cm (84 in) treads.

Main Structures specifications
Ground Bearing Pressure - 274.3 cm (108 in) Treads	296 kPa
Planetary Propel	Dual-motor independent drive.
Crawler Dimensions - Overall Width 213.4 cm (84 in) Treads, Standard	10 m
Ground Bearing Pressure - Total Effective Bearing Area (2)	41 m²
Ground Bearing Pressure	Ground bearing pressure is dependent upon many factors.
Ground Bearing Pressure - Total Effective Bearing Area (1)	32 m²
Upper Works Overall Width - Including Standard Walkways	13.5 m
Crawler Dimensions - Overall Width 274.3 cm (108 in) Treads	10.6 m
Ground Bearing Pressure - 213.4 cm (84 in) Treads - Standard	371 kPa
Swing	Two planetary gearboxes, each driven by a vertically mounted motor, are located on either side of the revolving frame. Dual-output pinion shafts from each gearbox engage the swing rack.
Hoist	A planetary gearbox with dual-output pinions provides the hoist torque transfer from the electric motor to the hoist drum gear.

Optimal Working Ranges* specifications
Cutting Height - Maximum	14.9 m
Dumping Height - With Clearance to Open Dipper Door	9.4 m
Cutting Radius - Maximum	22.8 m
Radius of Level Floor	16 m
Revolving Frame Tail Swing Radius	9.3 m
Note (1)	Optimal working ranges based on loading a Cat® 793F truck.
Note (2)	*All specifications are based on a 24 m3 (32 yd3) dipper and standard 213.4 cm (84 in) treads.

Lube System specifications
Type	Automatic, single-line system for open gear lubricant and grease.
Components (1)	6 pumps (4 for open gear lubricant and 2 for grease) located in an insulated, heated, double-walled lube room.
Components (2)	External fast fill from lower level.

Electrical specifications
Drive	IGBT Acutrol drive system.
Power Requirements - Peak power	3106 kW
Power Requirements - Voltage	3 phase, 50/60 Hz, 7,200V
Power Requirements - Average Power Demand	777-1087 kW (1,042-1,458 hp)
Power Requirements - 60 Hz	7,200V
Power Requirements - 50 Hz	6,000V, 6,600V, 7,200V, 11,000V
Note	Other voltages available to suit customer requirements.

Front End specifications
Rope Data - Crowd - Diameter	64 mm
Rope Data - Dipper Trip - Diameter	16 mm
Rope Data - Hoist - Diameter	70 mm
Rope Data - Boom Suspension - Diameter	83 mm
Rope Data - Crowd - No.	1
Rope Data - Retract - No.	1
Rope Data - Dipper Trip - No.	1
Components	One piece, forged, seamless tubular dipper handle and wide-spread boom point sheaves equipped with hoist ropes and dipper padlocks to stabilize dipper handle.
Rope Data - Boom Suspension - No.	4
Crowd	Rope Crowd: the crowd machinery is located at the front center of the revolving frame; consisting of a motor, brake, drum and gearing. Plastic-impregnated crowd and retract ropes are used to move the dipper handle fore and aft.
Rope Data - Hoist - No.	2
Rope Data - Retract - Diameter	64 mm
Note	High impact ropes available as an option

Complete 7395 Product Brochure

No Standard Equipment are available for this product yet.

Specifications