fbpx

Large Wheel Loaders

  • Specification Summary

  • Net Power463 kW
  • Operating Weight76500 kg
  • Bucket Capacities8.4-9.2 m3 (11-12 yd3)
  • Engine ModelCat 3412E HEUI
  • Gross Power503 kW

Engine

Net Power 463 kW
Engine Model Cat 3412E HEUI
Gross Power 503 kW
Net Power - Caterpillar 463 kW
Net Power - ISO 9249 463 kW
Net Power - DIN 70020 648 PS
Bore 137 mm
Stroke 152 mm
Displacement 27 L
Net Power - EEC 80/1269 463 kW

Operating Specifications

Operating Weight 76500 kg
Rated Payload 15 tonnes
Bucket Capacity Range 8.4-9.2 m3 11-12 yd3
Static Tipping Load, Full Turn 38243 kg
Static Tipping Load, Full Turn - HL 39048 kg
Dump Clearance 3952 mm
Breakout Force 583.6 kN
Operating Weight - HL 83252 kg
Breakout Force - HL 536 kN
Articulation Angle 35 Degrees

Buckets

Bucket Capacities 8.4-9.2 m3 (11-12 yd3)

Transmission

Transmission Type Powershift
Forward 1 7 km/h
Forward 2 12.8 km/h
Forward 3 22.4 km/h
Reverse 1 7.9 km/h
Reverse 2 14.1 km/h
Reverse 3 24.8 km/h
Converter Drive - Forward 1 7 km/h
Converter Drive - Forward 2 12.1 km/h
Converter Drive - Forward 3 20.8 km/h
Converter Drive - Reverse 1 7.7 km/h
Converter Drive - Reverse 2 13.4 km/h
Converter Drive - Reverse 3 22.8 km/h
Direct Drive - Forward 1 Lock-up disabled
Direct Drive - Forward 2 12.8 km/h
Direct Drive - Forward 3 22.4 km/h
Direct Drive - Reverse 1 7.9 km/h
Direct Drive - Reverse 2 14.1 km/h
Direct Drive - Reverse 3 24.8 km/h

Axles

Maximum Single-Wheel Rise and Fall 572 mm
Front Fixed
Rear Oscillating
Oscillation Angle 11

Hydraulic Cycle Time

Raise 9.2 Seconds
Dump 2.9 Seconds
Lower Float Down (Empty) 3.8 Seconds
Total Hydraulic Cycle Time 15.9 Seconds

Loader Hydraulic System

Main Hydraulic System Output at 2,128 rpm and 6900 kPa (1,000 psi) 650 L/min
Relief Valve Setting 31000 kPa
Cylinders, Double Acting: Lift, Bore and Stroke 234 mm x 1270 mm 9.25 in x 50 in
Cylinder, Double Acting: Tilt, Bore and Stroke 292 mm x 820 mm 11.5 in x 32.3 in
Pilot System, Gear-Type Pump Output at 2,000 rpm and 6900 kPa (1,000 psi) 46 L/min
Relief Valve Setting (low idle) 2400 kPa

Steering

Minimum Turning Radius (over bucket) 10337 mm
Steering Angle, each direction 35 Degrees
Hydraulic Output at 2,128 rpm and 6900 kPa (1,000 psi) 410 L/min
Relief Valve Setting 31000 kPa
Minimum Turning Radius (over bucket) - HL 10757 mm

Service Refill Capacities

Fuel Tank 1074 L
Cooling System 190 L
Crankcase 95 L
Transmission 110 L
Differentials and Final Drives - Front 271 L
Differentials and Final Drives - Rear 261 L
Hydraulic System (tank only) 174 L
Hydraulic System - Lift/Tilt and Brakes 435 L
Hydraulic System - Steering and Engine Cooling Fan 194 L
Hydraulic System (including tank) 435 L

Hydraulic System - Lift/Tilt

Number of Lift Cylinders 2
Number of Tilt Cylinders 1

Cab

Cab - ROPS/FOPS Meets SAE and ISO standards.
Sound Performance Meets ANSI, SAE and ISO standards.

Dimensions*

Height to Top of Exhaust Stacks 4726 mm
Height to Top of ROPS/FOPS 5070 mm
Ground Clearance 478 mm
Reach at Max. Lift/Dump - Std 1799 mm
Reach at Max. Lift/Dump - HL 2540 mm
Clearance at Max. Lift/Dump - Std 4135 mm
Clearance at Max. Lift /Dump - HL 4518 mm
Wheel Base Length 4600 mm
Overall Length - Std 12839 mm
Overall Length - HL 13578 mm
Width Over Tires 4071 mm
Turning Circle - Std 20740 mm
Full Turn Static Tipping Load at 35° 38243 kg
Turning Circle - HL 21514 mm
Straight Static Tipping Load - Std 43392 kg
Straight Static Tipping Load - HL 44152 kg
Hinge Pin Height at Full Lift - Std 5866 mm
Hinge Pin Height at Full Lift - HL 6432 mm
Tread Width 3050 mm

Brakes

Brakes Meet SAE/ISO 3450 1996.

Tires

Tires Choice of six tires.
Tires Tires used for measurement - 41.25/70-39 42 ply 
Array
(
    [model] => 990 Series II Large Wheel Loader
    [category] => 990 Series II Large Wheel Loader
    [url] => https://www.albahar.com/products/new/machines/details/wheel-loaders/994f/33/13972077/406/483/324/
)