992G Large Wheel Loader
A new standard for wheel loader productivity, serviceability and styling.
|Net Power||597 kW|
|Engine Model||3508B DITA|
|Gross Power||656 kW|
|Net Power - Caterpillar||597 kW|
|Net Power - ISO 9249||597 kW|
|Net Power - SAE J1349||590 kW|
|Net Power - DIN 70020||829 PS|
|Gross Power - ISO 3046-2||656 kW|
|Torque Rise||30 %|
|Net Power - EEC 80/1269||597 kW|
|Operating Weight||94930 kg|
|Rated Payload||21.8 tonnes|
|Articulation Angle||43 Degrees|
|Bucket Capacities||10.7-12.3 m3|
|Transmission Type||Planetary powershift|
|Forward 1||6.6 km/h|
|Forward 2||11.5 km/h|
|Forward 3||19.9 km/h|
|Reverse 1||7.3 km/h|
|Reverse 2||12.6 km/h|
|Reverse 3||22 km/h|
|Converter Drive - Forward 1||6.6 km/h|
|Converter Drive - Forward 2||11.5 km/h|
|Converter Drive - Forward 3||19.9 km/h|
|Converter Drive - Reverse 1||7.3 km/h|
|Converter Drive - Reverse 2||12.6 km/h|
|Converter Drive - Reverse 3||22 km/h|
|Direct Drive - Forward 1||Lock-up disabled|
|Direct Drive - Forward 2||12.4 km/h|
|Direct Drive - Forward 3||21.8 km/h|
|Direct Drive - Reverse 1||7.7 km/h|
|Direct Drive - Reverse 2||13.6 km/h|
|Direct Drive - Reverse 3||24 km/h|
|Maximum Single-Wheel Rise and Fall||630 mm|
Hydraulic Cycle Time
|Lower Float Down (Empty)||3.47 Seconds|
|Total Hydraulic Cycle Time||15.85 Seconds|
Loader Hydraulic System
|Relief Valve Setting||31000 kPa|
|Cylinders, Double Acting: Lift, Bore and Stroke||279.4 mm x 1173 mm 11.0 in x 46.2 in|
|Cylinder, Double Acting: Tilt, Bore and Stroke||279.4 mm x 1816 mm 11.0 in x 71.5 in|
|Relief Valve Setting (low idle)||2500 kPa|
|Steering||Meets SAE and ISO standards.|
|Total Steering Angle||86 Degrees|
|Minimum Turning Radius (over bucket)||10940 mm|
Service Refill Capacities
|Fuel Tank||1562 L|
|Cooling System||204 L|
|Differentials and Final Drives - Front||345 L|
|Differentials and Final Drives - Rear||326 L|
|Hydraulic System (factory fill)||646 L|
|Hydraulic System (tank only)||326 L|
|Hydraulic System - Steering and Engine Cooling Fan||231 L|
|Hydraulic System (including tank)||646 L|
|Sound Performance||Meets ANSI/SAE and ISO requirements|
|Height to Top of Exhaust Stacks||5234 mm|
|Height to Top of ROPS/FOPS||5590 mm|
|Height to Top of Hood||3984 mm|
|Ground Clearance||691 mm|
|Reach at Max. Lift/Dump - Std||2381 mm|
|Overall Height Bucket Raised - Std||2945 mm|
|Length - Rear Axle to Bumper||5890 mm|
|Wheel Base Length||5890 mm|
|Overall Length - Std||16226 mm|
|Hinge Pin Height at Full Lift - Std||6939 mm|
|Brakes||Meets SAE J1473 OCT90 and ISO 3450: 1992|
Structures and Cast Box BoomArticulated frame design features high-torsion, load-absorbing, front frame and large, modulus, box-section, engine-end frame. Cast box boom and linkage geometry offers greater dump clearance, breakout force and visibility to the bucket and target.
Power TrainDesigned for durability, the Caterpillar planetary power shift transmission and impeller clutch torque converter provide smooth, consistent shifting with finger tip control. Electronic controls contribute to increased levels of productivity.
Hydraulics and Electronic MonitoringThe 992G's hydraulic efficiency gives you better lift and tilt cycle times for a better overall cycle time. Innovative electro-hydraulics play a key role in performance of the 992G and provide low operator effort.
Operator StationExperience a new level of efficiency and comfort with one-hand operation provided by the STIC controller, finger tip bucket controls, excellent range of viewing, improved ventilation and easier entry and exit.
Buckets and Ground Engaging ToolsChoose from a variety of 11.5 m³ to 12.3 m³ capacity buckets, spade-edge buckets and heavy duty mining buckets with various Ground Engaging Tools to match job conditions. Replaceable wear plates on the bucket heel protect the bottom of the buckets.
Bucket MatchCorrect bucket and application match contribute to increased productivity.
Application Truck MatchIncreased performance and good pass matching make the 992G a versatile performer.
ServiceabilityPerform maintenance jobs with easy access to major service points such as oil levels and fills, grease fittings, sight gauges, filters and electrical breakers. A diagnostic connector allows quick electronic analysis. Improved access to the hydraulic valve and a reduction in connections also enhance serviceability. AutoLube is standard.
Complete Customer SupportYour Cat dealer is your one safe source for all your equipment needs. They offer a wide range of services that will fit your operation and keep you working longer with lower cost.
Have a Question?
"Call Back Option available only for UAE, Bahrain, Kuwait, Oman and Qatar."