Cat Large Wheel Loaders are designed with durability built in, ensuring maximum availability through multiple life cycles. With optimized performance and simplified serviceability, our machines allow you to move more material efficiently and safely at a lower cost per ton. The Cat 990 Wheel Loader has been a proven performer in mines, quarries and industrial applications around the world. The 990K brings all new levels of performance, safety, operator comfort and efficiency.
Operating Specifications
Rated Payload - Loose Material (Standard)
22 t
Rated Payload - Loose Material (High Lift)
20 t
Rated Payload - Standard (Quarry Face)
15.9 t
Rated Payload - High Lift (Quarry Face)
15.9 t
Bucket Capacity Range
8,6 m³ – 10,0 m³ (11,25 yd³ – 13,0 yd³)
Cat Truck Match - Standard
773-775
Cat Truck Match - High Lift
775-777
Operating Weight
80974 kg
Engine
Net Power
699 HP
Engine Model
C27 Cat®
Bore
137.2 mm
Stroke
152.4 mm
Displacement
27.03 l
Torque Rise
18 %
Rated Speed
1,800/min
Rated Speed - Net Power - SAE J1349 - Standard Ambient
699 HP
Rated Speed - Net Power - SAE J1349 - High Ambient
648 HP
Rated Speed - Gross - SAE J1995
571 kW
Net Power - SAE J1349
699 HP
Emissions
U.S. EPA Tier 4 Final OR Tier 2 Equivalent
Rated Speed - Gross - ISO 14396
561 kW
Gross - ISO 14396
561 kW
Peak Torque - 1,200 rpm
3557 N·m
Buckets
Bucket Capacities
7,4-14,9 m³ (9,7-19,5 yd³)
Transmission
Transmission Type
Cat-Planetenlastschaltgetriebe
Forward - 1
7.3 km/h
Forward - 2
13.3 km/h
Forward - 3
22.9 km/h
Reverse - 1
7.9 km/h
Reverse - 2
14.7 km/h
Reverse - 3
24.9 km/h
Direct Drive - Forward 1
Lock-up disabled
Direct Drive - Forward 2
13.7 km/h
Direct Drive - Forward 3
24.5 km/h
Direct Drive - Reverse 1
8.7 km/h
Direct Drive - Reverse 2
15.4 km/h
Direct Drive - Reverse 3
26.4 km/h
Note
Travel speeds based on Michelin 45/65R39 LD D2**L5 tires.
Axles
Front
Fixed
Rear
Trunnion
Oscillation Angle
8.5°
Hydraulic Cycle Times
Raise
8.2 s
Dump
2.9 s
Lower Float Down
3.6 s
Lower
3.7 s
Total Hydraulic Cycle Time - Empty Bucket
13.8 s
Rack Back
4.3 s
Service Refill Capacities
Fuel Tank
1114 l
Cooling System
208 l
Transmission
110 l
Hydraulic Tank - Implement and Hydraulic Fan
261 l
Differential - Final Drives - Rear
261 l
Differential - Final Drives - Front
271 l
Hydraulic Tank - Steering and Braking
132 l
Engine Crankcase
75.7 l
Hydraulic System Factory Fill
795 l
Note
All nonroad U.S. EPA Tier 4 diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm (mg/kg) sulfur or less. Biodiesel blends up to B20 (20% blend by volume) are acceptable when blended with 15 ppm (mg/kg) sulfur or less ULSD. B20 should meet ASTM D7467 specification (biodiesel blend stock should meet Cat biodiesel spec, ASTM D6751 or EN 14214. Cat DEO‑ULS™ or oils that meet the Cat ECF-3, API CJ‑4, and ACEA E9 specification are required. For further fluid specifications and guidelines, visit: http://parts.cat.com/cda/files/3244668/7/SEBU6250-19.pdf.
Hydraulic System - Lift/Tilt
Pilot System
Open loop and pressure reducing
Maximum Flow at 1,800 rpm (1)
817 l/min
Cylinders, Double Acting - Lift, Bore and Stroke
235 mm × 1287 mm (9.3 in × 50.7 in)
Relief Valve Setting - Lift/Tilt
33000 kPa
Maximum Flow at 1,800 rpm (2)
84 l/min
Relief Valve Setting - Main
3500 kPa
Lift/Tilt System - Circuit
Positive flow control
Cylinders, Double Acting - Tilt, Bore and Stroke
292.1 mm × 820 mm (11.5 in × 32.3 in)
Lift/Tilt System
Variable displacement piston
Sound Performance - Suppression
Operator Sound Level (ISO 6396:2008)
69 dB(A)
Machine Sound Level (ISO 6395:2008)
113 dB(A)
Sound Performance - Standard
Machine Sound Level (ISO 6395:2008)
115 dB(A)
Operator Sound Level (ISO 6396:2008)
69 dB(A)
Hydraulic System - Steering
Total Steering Angle
70°
Steering System - Pump
Piston, variable displacement
Steering System - Circuit
Pilot, load sensing
Steering
ISO 5010: 2007
Relief Valve Setting - Steering
32000 kPa
Maximum Flow at 1,400 rpm
358 l/min
Operator's Cab
ROPS/FOPS
ROPS/FOPS meet ISO 3471:2008 and ISO 3449:2005 Level II standards