The new 980L Wheel Loader, with the 2017 product update, applies proven technologies systematically and strategically to meet your high expectations for reliability, productivity, fuel efficiency, and long service life. Meets China Nonroad Stage III emission standards, U.S. EPA Tier 2/EU Stage II or Tier 3/Stage IIIA equivalent emission standards, depending on emission standards of specific country.
Engine
Net Power - ISO 9249
378 HP
Engine Model
Cat C13
Maximum Power - 1,800 rpm - ISO 14396 - Metric
303 kW
Maximum Net Power - 1,800 rpm - ISO 9249 - Metric
378 HP
Displacement
12.5 l
Peak Gross Torque - 1,300 rpm - ISO 14396
2172 N·m
Maximum Net Torque - 1,000 rpm
2040 N·m
Weights
Operating Weight
30090 kg
Note
Weight based on a machine configuration with Michelin 29.5R25 XLDD1 L4 radial tires, full fluids, operator, standard counterweight, cold start, roading fenders, Product Link?, open differential axles (front/rear), secondary steering, sound suppression, and a 5.4 m? general purpose bucket with BOCE.
Buckets
Bucket Capacities
4.2-12.2 m³ (5.5-16.0 yd³)
Service Refill Capacities
Cooling System
45 l
Crankcase
37 l
Transmission
77 l
Hydraulic Tank
153 l
Differential - Final Drives - Front
84 l
Differential - Final Drives - Rear
84 l
Fuel Tank
426 l
Sound
Note (1)
*Distance of 15 m, moving forward in second gear ratio.
With Cooling Fan Speed at 70% of Maximum Value - Operator Sound Pressure Level (ISO 6396:2008)**
72 dB(A)
With Cooling Fan Speed at Maximum Speed - Operator Sound Pressure Level (ISO 6396:2008)
75 dB(A)
With Cooling Fan Speed at 70% of Maximum Value - Exterior Sound Power Level (ISO 6395:2008)**
109 LWA***
Note (2)
**For machines in countries that adopt the EU Directives.
With Cooling Fan Speed at Maximum Speed - Exterior Sound Power Level (ISO 6395:2008)
112 dB(A)
Note (3)
***European Union Directive 2000/14/EC as amended by 2005/88/EC.
With Cooling Fan Speed at Maximum Speed - Exterior Sound Pressure Level (SAE J88:2013)
78 dB(A)*
Transmission
Forward - 1
6.9 km/h
Forward - 2
13.3 km/h
Forward - 3
23.5 km/h
Forward - 4
39.5 km/h
Reverse - 1
7.8 km/h
Reverse - 2
15.2 km/h
Reverse - 3
26.9 km/h
Reverse - 4
39.5 km/h
Note
Maximum travel speed in standard vehicle with empty bucket and standard L4 tires with 933 mm roll radius.
Operating Specifications
Breakout Force
224 kN
Static Tipping Load - Full 37° Turn - With Tire Deflection
19565 kg
Static Tipping Load - Full 37° Turn - No Tire Deflection
20796 kg
Note (2)
Full compliance to ISO 143971:2007 Sections 1 thru 6, which requires 2% verification between calculations and testing.
Note (1)
For a machine configuration as defined under "Weight."
Hydraulic System
Implement System - Maximum Operating Pressure
34300 kPa
Implement System - Maximum Pump Output at 2,250 rpm
449 l/min
Implement Pump Type
Variable Displacement Piston
Hydraulic Cycle Time - Total
10.1 s
Dimensions - Standard Lift
Height - Top of Exhaust Pipe
3746 mm
Rack Back - Maximum Lift
61 degrees
Rack Back - Carry Height
48 degrees
Ground Clearance
453 mm
Height - Top of ROPS
3813 mm
Maximum Width over Tires
3296 mm
Centerline of Rear Axle to Hitch
1900 mm
Centerline of Rear Axle to Edge of Counterweight
2608 mm
Rack Back at Ground
40 degrees
Overall Length - Without Bucket
8214 mm
Wheel Base
3800 mm
Hinge Pin Height at Maximum Lift
4539 mm
Note
All dimensions are approximate and based on Michelin 29.5R25 XLDD1 L4 radial tires.
Tread Width
2440 mm
Height - Top of Hood
3110 mm
Lift Arm Clearance at Maximum Lift
3795 mm
Hinge Pin Height at Carry
621 mm
Dimensions - High Lift
Overall Length - Without Bucket
8302 mm
Note
All dimensions are approximate and based on Michelin 29.5R25 XLDD1 L4 radial tires.