The Cat® 914K Compact Wheel Loader features an optimized Z-bar linkage that combines the digging efficiency of a traditional Z-bar loader with tool carrier capabilities for great performance and versatility. With parallel lift and high tilt forces throughout the working range you can safely and confidently handle loads with precise control.
Engine
| Maximum Gross Power |
100 hp |
| Engine Model |
Cat C4.4 |
| Maximum Gross Power - Maximum Engine Speed |
2350 r/min |
| Maximum Gross Power - SAE J1995 |
102 hp |
| Maximum Gross Power - ISO 14396 |
100 hp |
| Maximum Gross Power - ISO 14396 (DIN) |
102 hp |
| Rated Net Power - Rated Engine Speed |
2200 r/min |
| Rated Net Power - SAE J1349 |
98 hp |
| Rated Net Power - ISO 9249 |
99 hp |
| Rated Net Power - ISO 9249 (DIN) |
101 hp |
| Displacement |
4.4 l |
| Bore |
105 mm |
| Stroke |
127 mm |
| Maximum Gross Torque - SAE J1995 |
415 N·m |
| Maximum Gross Torque - ISO 14396 |
410 N·m |
| Maximum Net Torque - SAE J1349 |
400 N·m |
| Maximum Net Torque - ISO 9249 |
405 N·m |
| Emissions |
Engine meets Brazil MAR-1 emission standards, equivalent to U.S. EPA Tier 3/EU Stage IIIA. |
| Note |
Net power advertised is the power available at the flywheel plus front drive implement pump when the engine is equipped with fan, air cleaner, muffler and alternator. |
Weights
Buckets
| Bucket Capacities |
1.6-3.5 m3 (2.1-4.6 yd3) |
| General Purpose |
1.6-1.9 m3 (2.1-2.5 yd3) |
| Light Material |
2.5-3.5 m³ (3.2-4.6 yd³) |
Steering
| Steering Articulation Angle - Each Direction |
40 ° |
| Maximum Flow - Steering Pump |
82 l/min |
| Maximum Working Pressure - Steering Pump |
20000 kPa |
| Steering Cycle Times - Lock to Lock - At 2,350 rpm |
2.3 s |
| Number of Steering Wheel Turns - Lock to Lock |
3.4 turns |
Loader Hydraulic System
| Maximum Flow - Implement Pump |
148 l/min |
| Maximum Flow - Implement Pump - 3rd Function, Maximum Flow, Standard |
95 l/min |
| Maximum Flow - Implement Pump - 3rd Function, Maximum Flow, High |
120 l/min |
| Maximum Flow - Implement Pump - 4th Function, Maximum Flow |
95 l/min |
| Maximum Working Pressure - Implement Pump |
28000 kPa |
| Relief Pressure - Tilt Cylinder |
32000 kPa |
| Relief Pressure - Tilt Cylinder - 3rd and 4th Function Maximum Working Pressure |
28000 kPa |
| Relief Pressure - Tilt Cylinder - 3rd and 4th Function Relief Pressure |
25000 kPa |
| Hydraulic Cycle Time - Maximum Engine Speed - Raise, Ground Level to Maximum Lift |
5.2 s |
| Hydraulic Cycle Time - Maximum Engine Speed - Dump, at Maximum Reach |
1.4 s |
| Hydraulic Cycle Time - Maximum Engine Speed - Rack Back |
2.2 s |
| Hydraulic Cycle Time - Maximum Engine Speed - Float Down, Maximum Lift to Ground Level |
3.7 s |
| Hydraulic Cycle Time - Maximum Engine Speed - Total Cycle Time |
12.5 s |
Service Refill Capacities
| Fuel Tank |
154 l |
| Cooling System |
21.5 l |
| Engine Crankcase |
9 l |
| Axles - Front Center Differential |
7.5 l |
| Axles - Rear Center Differential |
7.5 l |
| Hydraulic System - Including Tank |
98 l |
| Hydraulic Tank |
55 l |
| Transmission |
3.4 l |
Transmission
| Forward and Reverse - Low Range, Speed Range 1* |
10 km/h |
| Forward and Reverse - Low Range, Speed Range 2* |
20 km/h |
| Note |
*Creeper Control allows speed control from a stand still up to 10 km/h (6.3 mph). The Creeper Control will only work in Range 1. |
Tires
| Standard Size |
17.5-25 16 PR (L-3) |
| Other Choices Include |
17.5-25 12 PR (L-2), 1PC Rim; 17.5-25 12 PR (L-3), 1PC Rim; 17.5R-25, radial (L-3), 1 or 3PC Rim |
| Note (1) |
Tire options may vary by region. Contact your Cat dealer for details. |
| Note (2) |
In certain applications, the loader's productive capabilities may exceed the tire's tonnes-km/h (ton-mph) capabilities. |
| Note (3) |
Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model. |
Cab
| ROPS |
ISO 3471:2008 |
| FOPS |
ISO 3449:2005 Level II |
| Note (1) |
Cab and Rollover Protective Structures (ROPS) are standard. |
| Note (2) |
The declared dynamic operator sound pressure levels per ISO 6396:2008*, when properly installed and maintained, is 77 dB(A). |
| Note (3) |
The labelled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC is 103 dB(A). |
| Note (4) |
*The measurements were conducted with the cab doors and windows closed. |
Axles
| Front |
Fixed; Locking differential (standard) |
| Rear |
Oscillating ±11 degrees; Locking differential (standard) |
30 Mins