• Banner
Compact Wheel Loaders

Cat® wheel loaders come in many different configurations to meet your requirements in all regions of the world.

Wheel Loaders for Any Job

Whether you need a wheel loader for use in landscaping, agricultural, construction, waste management, forestry, or mining applications. Caterpillar wheel loaders make your material handling and loading jobs safer, faster, more precise and profitable.

Cat wheel loaders set the standard for reliability, productivity, fuel efficiency, versatility and operator comfort. These environmentally friendly front end loader machines apply proven technologies systematically and strategically to meet our customer’s high expectations. Deep system integration results in reduced emissions and improved fuel economy without interrupting machine performance. Make your Cat wheel loader even more versatile by pairing it with Caterpillar’s broad range of work tools.

Select from a wide variety of front loaders in every size class: Compact Wheel Loaders, Small Wheel Loaders, Medium Wheel Loaders and Large Wheel Loaders. No matter what your material or handling job is, your Cat dealer can help you choose the wheel loader that best matches your needs.

914K Compact Wheel Loader

  • Specification Summary

  • Net Power 72 kW
  • Rated Net Power - Rated Engine Speed 2200 r/min
  • Maximum Gross Power - ISO 14396 74 kW
  • Rated Net Power - SAE J1349 72 kW
  • Product Brochure


Product Details


Net Power 72 kW
Rated Net Power - Rated Engine Speed 2200 r/min
Maximum Gross Power - ISO 14396 74 kW
Rated Net Power - SAE J1349 72 kW
Maximum Gross Power - SAE J1995 76 kW
Engine Model Cat C4.4
Maximum Gross Power - ISO 14396 (DIN) 74 kW
Maximum Gross Power - Maximum Engine Speed 2350 r/min
Maximum Gross Power 74 kW
Stroke 127 mm
Rated Net Power - ISO 9249 (DIN) 72 kW
Rated Net Power - ISO 9249 72 kW
Maximum Gross Torque - SAE J1995 455 N·m
Emissions Engine meets U.S. EPA Tier 3/EU Stage IIIA emission standards.
Note Net power advertised is the power available at the flywheel plus front drive implement pump when the engine is equipped with fan, air cleaner, muffler and alternator.
Bore 105 mm
Maximum Gross Torque - ISO 14396 450 N·m
Displacement 4.4 l


Operating Weight 8488 kg

Service Refill Capacities

Cooling System 21.5 l
Fuel Tank 154 l
Engine Crankcase 8.8 l
Hydraulic System - Including Tank 98 l
Axles - Rear Center Differential 7.5 l
Axles - Front Center Differential 7.5 l
Transmission 3.4 l
Hydraulic Tank 55 l

Operating Specifications

Rated Bucket Capacity 1.9 m³


Bucket Capacities 1.3-1.9 m3 (1.7-2.5 yd3)


ROPS ISO 3471:2008
FOPS ISO 3449:2005 Level II
Note (4) *The measurements were conducted with the cab doors and windows closed.
Note (2) The declared dynamic operator sound pressure levels per ISO 6396:2008*, when properly installed and maintained, is 77 dB(A).
Note (3) The labelled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC is 103 dB(A).
Note (1) Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.


Note (3) Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.
Note (2) In certain applications, the loader's productive capabilities may exceed the tire's tonnes-km/h (ton-mph) capabilities.
Standard Size 17.5-25 12PR
Other Choices Include 17.5-25 12PR L2; 17.5-R25 XHA * L3; 17.5-R25 * L2/L3 PC RM; 17.5-25 16PR L3, 3PC Rim; 17.5-25 GY L2/L3; 17.5-25 12PR L2, SNOW; Flexport�
Note (1) Other tire choices are available. Contact your Cat dealer for details.

Loader Hydraulic System

Relief Pressure - Tilt Cylinder - 3rd Function Maximum Working Pressure 21000 kPa
Maximum Flow - Implement Pump - 3rd Function, Maximum Flow, High 120 l/min
Maximum Flow - Implement Pump - 4th Function, Maximum Flow 90 l/min
Hydraulic Cycle Time - Dump, at Maximum Reach 1.4 s
Hydraulic Cycle Time - Float Down, Maximum Lift to Ground Level 3.7 s
Hydraulic Cycle Time - Rackback 2.2 s
Hydraulic Cycle Time - Total Cycle Time 12.5 s
Relief Pressure - Tilt Cylinder 34000 kPa
Maximum Working Pressure - Implement Pump 28000 kPa
Maximum Flow - Implement Pump 148 l/min
Relief Pressure - Tilt Cylinder - 4th Function Maximum Working Pressure 21000 kPa
Maximum Flow - Implement Pump - 3rd Function, Maximum Flow, Standard 90 l/min
Hydraulic Cycle Time - Raise, Ground Level to Maximum Lift 5.2 s


Note *Creeper Control allows speed control from a stand still up to 10 km/h (6.3 mph). The Creeper Control will only work in Range 1.
Forward and Reverse - Low Range, Speed Range 1* 10 km/h
Forward and Reverse - Low Range, Speed Range 2* 20 km/h


Front Fixed; Locking differential (standard)
Rear Oscillating �11 degrees; Locking differential (Standard)


Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left 3.75 turns
Steering Articulation Angle - Each Direction 40 °
Steering Cycle Times - Full Left to Full Right - At 2,350 rpm: 90 rpm Steering Wheel Speed 2.8 s
Maximum Flow - Steering Pump 82 l/min
Maximum Working Pressure - Steering Pump 22500 kPa

Engine - Tier 4 Final/Stage IV

Maximum Net Torque - SAE J1349 441 N·m
Maximum Net Torque - ISO 9249 446 N·m


  • Cat® Optimized Z-bar Loader Linkage – The Cat Optimized Z-bar Loader linkage combines the digging efficiency of a traditional Z-bar with tool carrier capabilities for great performance and versatility. With parallel lift and high tilt forces throughout the working range you can safely and confidently handle loads with precise control.
  • Work Tools – The 914K features the Cat exclusive, Performance Series Buckets, as well as high visibility pallet forks. These tools enhance productivity and are available with either an Integrated Toolcarrier (IT) or ISO (wide) coupler style. Legacy coupler tools such as brooms, grapple buckets, multi-purpose buckets and other work tools remain compatible.
  • Hydraulics and Controls – State of the art electro-hydraulic system provides low effort, fine control with fast cycle times. All-in-one joystick helps keep eyes on the work. Operator can adjust machine responsiveness with the push of a button, which allows the operator to set up the machine exactly the way they want it based on the application. High Flow option allows for the use of even the most demanding work tools.
  • Tuned Drivetrain – Smooth shifting and powerful acceleration is matched with modulated hydrostatic braking in the inching/braking pedal, creating a rhythm for material moving. Creeper and electronic engine speed control makes broom and snow blower work easy. Operator tunes between smooth or aggressive shifting with the push of a button.
  • Cab – All around visibility is further enhanced with the availability of a rearview camera. The deluxe cab ensures operator comfort with a heated, air suspension seat and easy to use controls. Available features such as Implement and Hystat Aggressiveness, Ride Control, Lift and Tilt Kickouts, Engine Speed Control and Rimpull Control allow the operator to customize the machine via a soft touch keypad.
  • Serviceability – Extended service intervals and excellent service access make daily checks quick and easy allowing you to get to work sooner.
  • Efficiently Powerful with its high full turn tipping loads, powerful breakout forces and increased engine power the K Series delivers a balanced solution for all customer applications.
  • Fuel Savings Features such as Eco Mode and an On Demand Cooling Fan make the 914K both powerful and fuel efficient.

"Call Back Option available only for UAE, Bahrain, Kuwait, Oman and Qatar."

Have a Question?

Signup to Al-Bahar Monthly newsletter and stay connected!

We respect your privacy and will never share or sell your information.