Specifications
Height |
1864 mm (73.4 in) |
Load Capacity |
10 tonnes (11.02 tons) |
Power Type |
Diesel, Turbocharged |
Axles Standard
Front Axle |
Fixed |
Rear Axle |
Bolster Mount |
Type |
Bevel Gear and Pinion |
Type |
Outboard Planetary |
Dimensions (Approximate)
Height – Ground Clearance |
370.0 mm |
Height – Top of Covers |
1550.0 mm |
Height – Top of ROPS: HIGH Canopy Mount |
1990.0 mm |
Height – Top of ROPS: LOW Canopy Mount |
1864.0 mm |
Height – Top of ROPS: MID Canopy Mount |
1927.0 mm |
Inner Turn Radius |
3110.0 mm |
Length – Overall with Bucket |
9620.0 mm |
Length – Overall with Fork |
9650.0 mm |
Length – Rear Axle to Bumper |
2770.0 mm |
Length – Wheel Base |
3360.0 mm |
Lift Height of Fork |
2490.0 mm |
Lift Height – Bucket Raised |
3730.0 mm |
Lift Height – Fork Frame |
3700.0 mm |
Outer Turn Radius Frame |
5901.0 mm |
Turn Radius Bucket |
6305.0 mm |
Width |
2340.0 mm |
Width – Overall |
2500.0 mm |
Oscillation
Degrees Up and Down from Horizon |
7.5 Degree |
Vehicle Speeds
1st Gear |
2.9 km/h |
2nd Gear |
6.1 km/h |
3rd Gear |
10.5 km/h |
4th Gear |
18.1 km/h |
Start System
Starter Motor Type |
Air Turbine Type |
Articulation
Degrees of Turn Either Side |
43 Degree |
Capacities
Bucket Payload |
8000.0 kg |
Maximum Braked Trailer Mass |
Consult Caterpillar |
Maximum Un-braked Trailer Mass |
10000.0 kg |
RAS Belt/Cable Reeler, Maximum Payload |
7000.0 kg |
RAS Forks, Maximum Payload |
10000.0 kg |
RAS Slewing Jib, Maximum Payload |
7000.0 kg |
Standard Ejector Bucket
Heaped Capacity (SAE) |
3.5 m3 |
Struck Capacity |
2.7 m3 |
Service Capacities
Axle Oil (Each) |
60.0 L |
Engine Cooling System Water |
72.0 L |
Engine Crankcase Oil (with Filter) |
25.0 L |
Fuel Tank |
200.0 L |
Hydraulic Tank |
250.0 L |
Main Air Receiver |
150.0 L |
Transmission/Converter Oil |
40.0 L |
Water Make Up Tank |
450.0 L |
Pneumatic System
Air Flow |
0.340 m3/min (1.2 ft3/min) @ 1,500 rpm |
Air Receiver Volume |
150.0 L |
Compressor Type |
Piston Engine Gear Driven |
Governed Pressure |
800.0 kPa |
Relief Pressure |
830.0 kPa |
Seating (Driver)
Electrical System
Polarity |
Floating Chassis |
Type |
Approved Flameproof |
Voltage |
12.0 volts |
Lights
Number/Location |
2 Front, 2 Rear; Approved Flameproof |
Alternator
Drive |
Hydraulic |
Type |
Approved Flameproof |
Wheels
Make/Model |
5 Pieces (Heavy Duty) |
Canopy
Type Protective Device |
ROPS/FOPS |
Grade Ability
Front to Rear |
1:4 |
Side to Side (Empty) |
1:4 |
Side to Side (Loaded) |
1:8 |
Tires
Inflation Media |
Air |
Inflation Pressure |
800.0 kPa |
Ply Rating |
Radial |
Size |
17.5 × R25 |
Type |
XKA Tires |
Weight
Laden with Forks and 10T Load |
29000.0 kg |
Unladen with Full Tanks and Bucket |
19000.0 kg |
Intake Air Cleaner
Intake Flame Trap |
Spiral Wound Type |
Type/Make |
Dry Dual Element/Caterpillar |
Exhaust Conditioner
Aftertreatment |
Catalytic Exhaust Purifier |
Exhaust Filter |
Replaceable Element Except China |
Exhaust Flame Trap |
Replaceable China and RSA |
Make |
Caterpillar |
Type |
Flameproof Wet |
Transmission
Speeds, Forward and Reverse |
4 |
Type |
Power Shift with Forward/Reverse |
Hydraulic Filtration
Bucket System |
Return 10 Micron Replaceable with Bypass |
Steer/Brake System |
Pressure 10 Micron Replaceable with Bypass |
Shutdown System
Optional Shutdowns |
High Methane; Low Hydraulic Oil; Exhaust Scrubber Temperature |
Standard Shutdowns |
Low Engine Oil Pressure; Exhaust Temperature; Engine Coolant Level; Engine Coolant Temperature; Turbo Temperature |
Standard Shutdowns (cont'd.) |
Scrubber Level 1; Scrubber Level 2 |
System Type |
DCS Electronic; Intrinsically Safe Approved |
Engine (6 Cylinder)
Cooling Fan |
Hydraulic Driven Fan |
Cooling System |
Coolant Based Radiator |
Displacement |
7.2 L |
Engine Make/Model |
Cat® C7 |
Maximum Power Gross |
171.5 kW (230 hp) @ 2,200 rpm |
Maximum Torque Tested |
895 N·m (660 lb-ft) @ 1,700 rpm |
Radiator Position |
Vertical Rear |
Type |
Diesel, Turbocharged |
Engine Speeds
High Idle |
2300.0 RPM |
Low Idle |
800.0 RPM |
Fuel Consumption
At Full Power |
39.4 L/hr |
Average Mine Duty |
20-40 L/hr (5.3-10.6 gal/hr) |
The Cat CL210 comes standard with the Rapid Attachment System (RAS) for rapid pick up and release of attachments.
10 000 kg (22,046 lb) Forks with Side Shift
7000 kg (15,432 lb) Slewing Jib Crane
3.5 m3 (4.6 yd3) Bucket - Spade or Straight Lip
5 m³ (6.5 yd3) Bucket (Direct Mount)
General Purpose Trailer
Pipe Trailer
Power Assist Ready
7000 kg (15,432 lb) Belt/Cable Reeler
10 000 kg (22,046 lb) Manual Side Shift Forks
Work Platform
Fuel Pod
Concrete Kibble
Trailer Towing Adapter (SH150)
Trailer Power Assist (SH150)