In face conveyor or plow automation systems the Cat® PMC-V provides the human machine interface (HMI) to interact with the PMC-D drive controls to operate manual mode, visualize and change parameters and show actual process values. Within a PMC-D system minimum one and typically up to 3 PMC-Vs are in equal operation.
Components
| Operating System |
µITRON RTOS |
| Processor |
32Bit RISC Microcontroller TX1940CYAF, 32MHz, internal RAM 10Kbytes, ROM 256Kbytes |
| RAM Memory |
4Mbytes CMOS Static RAM, 4Mbytes Flash |
Electrical Sockets
| Socket 1 – Pin 1 |
Optocoupler Anode |
| Socket 1 – Pin 2 |
Relay Contact NO: a |
| Socket 1 – Pin 3 |
Relay Contact NO: b |
| Socket 1 – Pin 4 |
Optocoupler Kathode |
| Socket 10 – Pin 1 |
+12 V (A) |
| Socket 10 – Pin 2 |
Measurement Input 3 |
| Socket 10 – Pin 3 |
+8.2 V |
| Socket 10 – Pin 4 |
GND |
| Socket 11 – Pin 1 |
Options |
| Socket 11 – Pin 2 |
Options |
| Socket 11 – Pin 3 |
Options |
| Socket 11 – Pin 4 |
Options |
| Socket 12 – Pin 2 |
Profibus: a (internal) |
| Socket 12 – Pin 3 |
Profibus: b (internal) |
| Socket 2 – Pin 1 |
+12 V (A) |
| Socket 2 – Pin 2 |
Serial Interface: RxD |
| Socket 2 – Pin 3 |
Serial Interface: TxD |
| Socket 2 – Pin 4 |
GND |
| Socket 3 – Pin 1 |
+12 V (B) |
| Socket 3 – Pin 2 |
Serial Interface: RxD |
| Socket 3 – Pin 3 |
Serial Interface: TxD |
| Socket 3 – Pin 4 |
GND |
| Socket 4 – Pin 1 |
+12 V (C) |
| Socket 4 – Pin 2 |
Serial Interface: RxD |
| Socket 4 – Pin 3 |
Serial Interface: TxD |
| Socket 4 – Pin 4 |
GND |
| Socket 5 – Pin 1 |
Options |
| Socket 5 – Pin 2 |
Options |
| Socket 5 – Pin 3 |
Options |
| Socket 5 – Pin 4 |
Options |
| Socket 6 – Pin 2 |
Profibus: a (internal) |
| Socket 6 – Pin 3 |
Profibus: b (internal) |
| Socket 7 – Pin 1 |
+12 V Input |
| Socket 7 – Pin 2 |
Serial Interface: TxD |
| Socket 7 – Pin 3 |
Serial Interface: RxD |
| Socket 7 – Pin 4 |
GND Input |
| Socket 8 – Pin 1 |
+12 V (B) |
| Socket 8 – Pin 2 |
Measurement Input 1 |
| Socket 8 – Pin 3 |
+8.2 V |
| Socket 8 – Pin 4 |
GND |
| Socket 9 – Pin 1 |
+12 V (C) |
| Socket 9 – Pin 2 |
Measurement Input 2 |
| Socket 9 – Pin 3 |
+8.2 V |
| Socket 9 – Pin 4 |
GND |
Options (Designations of options equal the second and third to last characters of type designation listed on equipment.)
| Socket 11 – Pin 1 |
AB |
| Socket 11 – Pin 1 |
** |
| Socket 11 – Pin 2 |
AB (Profibus: a [external]) |
| Socket 11 – Pin 2 |
** |
| Socket 11 – Pin 3 |
AB (Profibus: b [external]) |
| Socket 11 – Pin 3 |
** |
| Socket 11 – Pin 4 |
** |
| Socket 11 – Pin 4 |
AB |
| Socket 5 – Pin 1 |
AB |
| Socket 5 – Pin 1 |
** |
| Socket 5 – Pin 2 |
AB (Profibus: a [external]) |
| Socket 5 – Pin 2 |
** |
| Socket 5 – Pin 3 |
AB (Profibus: b [external]) |
| Socket 5 – Pin 3 |
** |
| Socket 5 – Pin 4 |
AB |
| Socket 5 – Pin 4 |
** |
Global Certifications
| Types |
Europe: ATEX |
| Types |
U.S.: MSHA |
| Types |
More certifications on demand |
| Types |
Australia: IECEx, ANZEx |
| Types |
China: MA |
| Types |
Russia: GOST |
Electrical Data
| Supply Current – Maximum Ratings |
1.5 amps |
| Supply Current – Typical Value |
1.0 amps |
| Supply Voltage – Maximum Ratings |
9.5 V - 13.2 V |
| Supply Voltage – Typical Value |
12 V DC |
Environmental Data
| Temperature – Maximum Ratings |
-20° C - +40° C (-4° F - +104° F) |
| Temperature – Symbol |
Tamb |
| Temperature – Typical Value |
20.0 ° C |
Dimensions (Approximate)
| Height |
148.0 mm |
| Length |
335.0 mm |
| Width |
241.0 mm |
Main Technical Data
| Components |
320 × 240 pixel b/w graphics display |
| Components |
IP 68 |
| Components |
Optional additional Profibus communication channel for communication with third party computer |
| Components |
12 SKK24 sockets for power supply, communication, sensors and actuators |
| Components |
Power: 12 W |
Features
- Human machine interface for configuration and customization of the PMC-D/V family
- Diagnostic features for whole system
- Process visualization
- Change of parameters
- Communication link to other systems
- Additional sensor inputs
