• Banner
Waste Handler Track Loaders(Non Current)

We build the most complete line of track loaders in the construction equipment industry. Matching Cat® track loaders to specific applications is easy with several different configurations of track loaders built to serve customers worldwide.

953D Waste Handler

Our customers think the track loader is the 2nd most important machine behind the compactor in a landfill. Discover the assets of this Cat® Waste Handler ...

  • Specification Summary

  • Engine ModelCat® C6.6 ACERT™
  • Flywheel Power110.0 kW
  • Operating Weight15595.0 kg
  • Capacity - General Purpose Landfill2.3 m3
  • Capacity - Multi-Purpose Landfill2.1 m3
  • Product Brochure


Product Details


Engine Model Cat® C6.6 ACERT™
Flywheel Power 110.0 kW


Operating Weight 15595.0 kg


Capacity - General Purpose Landfill 2.3 m3
Capacity - Multi-Purpose Landfill 2.1 m3
Width - General Purpose Landfill 2458.0 mm
Width - Multi-Purpose Landfill 2536.0 mm


Track Shoe Width - Standard 480.0 mm
Track Shoe Width - Optional 380.0 mm
Track Gauge 1800.0 mm
Track on Ground 2320.0 mm
Ground Contact Area - Standard Shoe 1.8 m2
Ground Contact Area - Optional Shoe 2.2 m2
Ground Pressure - Standard Shoe 65.8 kPa
Ground Pressure - Optional Shoe 84.1 kPa
Track Shoe Type Double Grouser

Operating Specifications

Track on Ground 2320.0 mm
Ground Pressure 65.8 kPa
Max Travel Speed 10.0 km/h


Standards Standards

Service Refill Capacities

Fuel Tank 316.0 L
Cooling System 31.0 L
Crankcase (with Filter) 16.5 L
Final Drives (each) 10.8 L
Hydraulic Tank 70.0 L

Ripper Specifications

Type Radial
Number of Pockets 3
Overall Width/Beam 1952.0 mm
Penetration 240.0 mm
Ripping Width 1800.0 mm

Hydraulic System - Implement

Cycle Time - Dump 1.5 Seconds
Cycle Time - Raise 5.9 Seconds
Float Down 3.2 Seconds
Output - Maximum 140.0 L/min
Relief Valve Setting 28000.0 kPa
Total Cycle Time 10.6 Seconds
Type Close center load sensing/piston

Waste Handling Arrangement

Tailored for waste applications.

Final Drive Seal Guards

Protects the Duo Cone seal against wrapping of wires or plastics.

Hydraulic Reversible Fan

Purges the debris from the air inlets by reversing the airflow. Limits radiator plugging and increases maintenance interval.

Turbine Precleaner

Increase engine air filter life by pre-cleaning the air.

Guard, Idler and Lift Lines

Protects and limits the entry of debris into the tensioning system and lift lines. It includes scrapers mounted around idler.

Rubber Mounted Windshield

Makes the windshield replacement easy and fast.

Eight Lights

Increase work time with four lights at the front and four at the back.

Hinged Grill and Radiator Fan

Provides excellent access to radiator and fan for cleaning.

Extensive Sealing

Improved sealing between engine enclosure, cab and frame limits radiator plugging.


Tailored for waste applications.

Center Holes Shoes

The center holes in the track allow sprocket to punch out dirt and debris, that prevents an increase of track wear caused by an abnormal track tension. This is the best choice in landfill.

Striker Bars

Very useful in landfills, the striker bars removes waste from the tracks to prevent damaging the fenders and the cab. Equipped with a step, it facilitate the access to the cab from the rear.

General Purpose Bucket - Landfill

This trash rack increases the standard bucket capacity to move low density materials.

Multi-Purpose Bucket - Landfill

This buckets provides the ability to load, push, grab. Trash rack increases the standard MP bucket capacity to move low density materials.

Guard, Cab Lights and Windshield Screen

Provides additional protection to the windshield and the lights against debris.

Guard Track Roller

Provides additional protection for rollers and reduce debris entry inside the links.

Tilt Cab System

The D-Series enables the cab to tilt up to 90°. The optional hydraulic jack provides a 30° tilting capability recommended for an easy servicing in the field.

Fast Fill System

Special port and vent designed to minimize the fuel tank refill time and increase productivity.
  • For standard equipment, please refer to the 953D Track Loader information.
      •  Lights, 4, extra
      •  Beacon, rotating
      •  Control, joystick, MP bucket
      •  Control, two levers, GP bucket
      •  Comfort seat, air suspended, heated
      •  Cab window, front sealed
      •  Cat Messenger
      •  Fan, demand, reversible
      •  Tank fuel, fast fill
      •  Air inlet, pre-cleaner, turbine
    • Fan, demand, reversible
      • Tank fuel, fast fill
        • Air inlet, pre-cleaner, turbine
          • HYDRAULICS
            •  Hydraulic oil, bio
            •  Oil change, high speed
            •  Hydraulics MP Bucket, lines front
            •  Hydraulics RIPPER, control, lines rear
            •  Hydraulics MP + RIPPER, lines front and rear
            •  Striker bar, rear
            •  Ripper, multi-Shank
            •  Hitch, standard
            •  Hitch, extended
            •  Counterweight, light
            •  Counterweight, additional
          • Striker bar, rear
            • Ripper, multi-Shank
              • Hitch, standard
                • Hitch, extended
                  • Counterweight, light
                    • Counterweight, additional
                      • BUCKETS
                        •  General Purpose, for bolt-on GET
                        •  General Purpose, flush mounted adapt
                        •  Multi-Purpose
                        •  Multi-Purpose, landfill
                        •  General Purpose, landfill, flush mounted adapt
                        •  General Purpose, landfill and demolition
                      • BUCKET ATTACHMENTS
                        •  Teeth, Extra Duty
                        •  Teeth, General Duty
                        •  Teeth, Penetration
                        •  Bolt On, Cutting Edge
                        •  Bolt On Segments, Cutting Edge
                        •  Cutting Edge Segment
                        •  Tips, Extra Duty
                      • Teeth, Extra Duty
                        • Teeth, General Duty
                          • Teeth, Penetration
                            • Bolt On, Cutting Edge
                              • Bolt On Segments, Cutting Edge
                                • Cutting Edge Segment
                                  • Tips, Extra Duty
                                    • GUARDS
                                      •  Guard, track roller
                                      •  Guard, idler
                                      •  Guard, cab lights
                                      •  Guard, lift lines
                                      •  Screen, windshield
                                    • UNDERCARRIAGE
                                      •  Track shoes, 380 mm (15 in), double grouser
                                      •  Track shoes, 480 mm (19 in), center hole
                                      •  Track shoes, 480 mm (19 in), double grouser
                                      •  Track shoes, 800 mm (31 in), Wide Gauge
                                      •  Final drive, waste
                                      •  Undercarriage, 2100 mm (83 in), Wide Gauge
                                    • Track shoes, 380 mm (15 in), double grouser
                                      • Track shoes, 480 mm (19 in), center hole
                                        • Track shoes, 480 mm (19 in), double grouser
                                          • Track shoes, 800 mm (31 in), Wide Gauge
                                            • Final drive, waste
                                              • Undercarriage, 2100 mm (83 in), Wide Gauge
                                                • OTHER ATTACHMENTS
                                                  •  Cab, tilt jack, hydraulic
                                                  •  Radio, AM/FM, CD
                                                  •  Heather, engine coolant, 120V
                                                  •  Heather, engine coolant, 240V
                                                  •  Re- fueling pump
                                                  •  Sediment pump, fuel tank
                                                  •  Cat Product Link
                                                  •  Antifreeze, -50° C (-58° F)

                                                "Call Back Option available only for UAE, Bahrain, Kuwait, Oman and Qatar."

                                                Have a Question?

                                                new standard gc

                                                Signup to Al-Bahar Monthly newsletter and stay connected!

                                                We respect your privacy and will never share or sell your information.