The Cat® 236D3 Skid Steer Loader, with its radial lift design, delivers impressive mid-lift reach and excellent digging performance with outstanding drawbar power.
Engine
Gross Power - SAE J1995 |
60 HP |
Net Power - SAE 1349 |
72.1 HP |
Displacement |
3.3 l |
Stroke |
120 mm |
Bore |
94 mm |
Net Power - ISO 9249 |
72.8 HP |
Peak Torque - 1,600 rpm - SAE J1995 |
265 N·m |
Net Power ISO 9249† |
73.5 HP |
Net Flywheel Power |
53.8 kW |
Net Power SAE 1349† |
72.7 HP |
Engine Model |
Cat C3.3B DIT (turbo) |
Note |
†Engine meeting Brazil MAR-1 and China Nonroad Stage III emission standards emits equivalent to U.S. EPA Tier 4 Interim and is offered only for Australia/New Zealand, Brazil, China, French Polynesia, Hong Kong, Macedonia and New Caledonia. |
Operating Specifications
Rated Operating Capacity |
825 kg |
Tipping Load |
1635 kg |
Breakout Force - Tilt Cylinder |
2269 kg |
Rated Operating Capacity with Optional Counterweight |
910 kg |
Note |
Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, OROPS, 1730 mm (68 in) low profile bucket, Cat 10 × 16.5 tires, standard flow hydraulics, mechanical suspension seat, no optional counterweights and manual quick coupler (unless otherwise noted). |
Weights
Operating Weight |
2972 kg |
Note |
Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, OROPS, 1730 mm (68 in) low profile bucket, Cat 10 × 16.5 tires, standard flow hydraulics, mechanical suspension seat, no optional counterweights and manual quick coupler (unless otherwise noted). |
Dimensions
Wheel Base |
1105 mm |
Height - Top of Cab |
2082 mm |
Vehicle Width over Tires |
1676 mm |
Ground Clearance |
195 mm |
Departure Angle |
26° |
Maximum Dump Angle |
48° |
Rack Back Angle - Maximum Height |
91° |
Bucket Pin Height - Carry Position |
190 mm |
Clearance at Maximum Lift and Dump |
2359 mm |
Length - With Bucket on Ground |
3487 mm |
Note |
Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, OROPS, 1730 mm (68 in) low profile bucket, Cat 10 × 16.5 tires, standard flow hydraulics, mechanical suspension seat, no optional counterweights and manual quick coupler (unless otherwise noted). |
Length - Without Bucket |
2767 mm |
Turning Radius from Center - Machine Rear |
1639 mm |
Turning Radius from Center - Coupler |
1314 mm |
Bumper Overhang - Behind Rear Axle |
1021 mm |
Maximum Reach - With Arms Parallel to Ground |
1353 mm |
Maximum Overall Height |
3977 mm |
Turning Radius from Center - Bucket |
2107 mm |
Bucket Pin Height - Maximum Lift |
3122 mm |
Reach - Maximum Lift/Dump |
408 mm |
Hydraulic System
Hydraulic Flow - Standard - Hydraulic Power (Calculated) |
29 kW |
Hydraulic Flow - High Flow - Maximum Loader Hydraulic Flow |
112 l/min |
Hydraulic Flow - High Flow - Maximum Loader Hydraulic Pressure |
23000 kPa |
Hydraulic Flow - Standard - Loader Hydraulic Flow |
76 l/min |
Hydraulic Flow - Standard - Loader Hydraulic Pressure |
23000 kPa |
Hydraulic Flow - High Flow - Hydraulic Power (Calculated) |
43 kW |
Cab
ROPS |
ISO 3471:2008 |
FOPS |
ISO 3449:2005 Level I |
Power Train
Travel Speed - Forward or Reverse - Two Speed Option |
17.1 km/h |
Travel Speed - Forward or Reverse - One Speed |
11.2 km/h |
Service Refill Capacities
Chain Box - Each Side |
8.8 l |
Cooling System |
14 l |
Engine Crankcase |
11 l |
Fuel Tank |
94 l |
Hydraulic System |
50 l |
Hydraulic Tank |
39 l |
Noise Level
Note (2) |
**The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC. |
Note (1) |
*The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds. |
Inside Cab* |
83 dB(A) |
Outside Cab** |
101 dB(A) |
Air Conditioning System (if equipped)
Air Conditioning |
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.81 kg of refrigerant which has a CO2 equivalent of 1.158 metric tonnes. |