775E Off-Highway Truck

Operating Specifications

Nominal Payload Class (100%)	63.5 tonnes
Top Speed – Loaded	65.8 km/h
Body Capacity - Struck	31.4 m3
Maximum Capacity	63.5 tonnes
Steer Angle	31 Degrees
Body Capacity – SAE 2:1	41.5 m3

Engine

Engine Model	Cat® 3412E
Rated Engine Speed	2000 RPM
Gross Power – SAE J1995	567 kW
Net Power – SAE J1349	544 kW
Net Power - Cat	544 kW
Flywheel Power	544 kW
Net Power – 80/1269/EEC	544 kW
Net Power – ISO 9249	544 kW
Number of Cylinders	12
Torque Rise	33 %
Bore	137 mm
Stroke	152 mm
Displacement	27 L

Capacity – Dual Slope – 100% Fill Factor

Struck	32.7 m3
Heaped 2:1 (SAE)	41.2 m3

Capacity – Flat Floor – 100% Fill Factor

Struck	31.4 m3
Heaped 2:1 (SAE)	41.5 m3

Weight Distributions – Approximate

Front Axle – Empty	44.3 %
Front Axle – Loaded	31.2 %
Rear Axle – Empty	55.7 %
Rear Axle – Loaded	68.8 %

Transmission

Forward 1	10 km/h
Forward 2	13.9 km/h
Forward 3	18.7 km/h
Forward 4	25.1 km/h
Forward 5	34 km/h
Forward 6	45.9 km/h
Forward 7	65.8 km/h
Reverse	12 km/h

Final Drives

Differential Ratio	3.64:1
Planetary Ratio	4.80:1
Total Reduction Ratio	17.48:1

Brakes

Brake Surface – Front	1395 cm2
Brake Surface – Rear	61265 cm2
Brake Standards	ISO 3450:1996

Service Refill Capacities

Fuel Tank	700 L
Cooling System	151 L
Differentials and Final Drives	155 L
Steering Tank	34 L
Steering System (Includes Tank)	60 L
Torque Converter / Brake / Hoist Hydraulic Tank	133 L
Brake / Hoist System (Includes Tank)	307 L
Torque Converter / Transmission System (Includes Sump)	72 L

Body Hoists

Pump Flow – High Idle	562 L/min
Relief Valve Setting – Raise	17225 kPa
Relief Valve Setting – Lower	3445 kPa
Body Raise Time – High Idle	9.5 Seconds
Body Lower Time – Float	12.5 Seconds

Suspension

Effective Cylinder Stroke - Front	209 mm
Effective Cylinder Stroke - Rear	149 mm
Rear Axle Oscillation	8 Degrees

Approximate Weights – Dual Slope

Body

9710 kg

Sound

Sound Standards

Meets SAE J88 APR95

ROPS

ROPS/FOPS Standards

Meets SAE J1040 MAY94 and ISO 3471:1994

Dimensions

Height - Top of ROPS	3938 mm
Overall Body Length	8625 mm
Inside Body Length	6537 mm
Overall Length	9209 mm
Wheelbase	4191 mm
Rear Axle to Tail	2872 mm
Ground Clearance	680 mm
Dump Clearance	660 mm
Loading Height – Empty	3912 mm
Inside Body Depth - Max	1904 mm
Overall Height – Body Raised	8796 mm
Operating Width	5076 mm
Centerline Front Tire Width	3275 mm
Engine Guard Clearance	680 mm
Overall Canopy Width	4732 mm
Inside Body Width	3990 mm
Front Canopy Height	4410 mm
Rear Axle Clearance	650 mm
Centerline Rear Dual Tire Width	2927 mm
Overall Tire Width	4252 mm

Steering

Steering Standards	Meets SAE J1511 FEB94 and ISO 5010:1992
Steer Angle	31 Degrees
Turning Circle Clearance Diameter	23.8 m

Tires

Standard Tire

Standard: 24.00-R35 (E4)

Approximate Weights – Flat Floor

Body

13070 kg

Power Train - Engine

The twelve-cylinder, turbocharged engine is built for power, reliability, economy and with the HEUI™ fuel system, meets worldwide emissions.

Cat 3412E Diesel Engine

The four-stroke design uses long power strokes for more complete fuel combustion and optimum efficiency. High displacement and a low speed rating can help extend engine life.

Torque Rise

The 33 percent torque rise provides high lugging force during acceleration and less down-shifting on grade or in rough underfoot conditions. The torque rise effectively matches the transmission shift points to provide maximum efficiency and faster cycle times.

Engine

1) Valve Rotators 2) Turbocharger 3) Stellite-Faced Valves 4) Steel-Backed, Copper-Bonded Bearings 5) Oil Cooler 6) Forged Crankshaft 7) Aftercooler 8) Adjustment-Free, Fuel Injection Pumps 9) Hydraulic Injectors 10) Forged Steel Pistons 11) Full-length, Water-Cooled Cylinder Liners

Engine Features

Contributing to the 3412E power and reliability are:

• High pressure injection
• Full electronic control
• One-piece forged steel pistons with three rings cooled by oil spray
• Copper-bonded crankshaft bearings
• Hardened crankshaft journals
• Dry-type, radial seal air cleaners with primary and secondary elements and precleaner
• Direct-electric, 24-volt starting system with 50-amp alternator and two 172-amp-hour, low maintenance, high output, 12-volt batteries

Hydraulic Electronic Unit Injector (HEUI™)

The HEUI system is a proven high-pressure, direct injection fuel system. This system electronically monitors operator and machine inputs to optimize engine performance. The HEUI system is unique in its ability to independently control injection pressure over the entire engine operating range. This allows complete control over injection timing, duration, performance and efficiency. Rate shaping technology modifies the heat release characteristics of the combustion process for significant decreases in sound and emission levels. Exhaust smoke is significantly reduced through precise, electronic control of fueling limits and injection timing of the HEUI.

Electronic Control Module (ECM)

The ECM monitors key functions and logs critical indicators. The Electronic Technician can access this diagnostic information for easier maintenance and repair.

Power Train - Transmission

The Cat seven-speed, power shift transmission gets the job done smoothly and quickly.

Transmission

The Cat seven-speed, power shift transmission, matched with the direct-injection 3412E diesel engine provide constant power over a wide range of operating speeds.

Transmission Features

Include:

• Seven speeds forward, one reverse
• Torque converter driven in reverse
• First gear has both torque converter drive and direct drive
• Second through seventh gears are direct drive
• Single-lever shift control provides automatic shifting in all gears up to the one selected by the control lever
• Each shift is individually modulated for maximum smoothness
• Separate hydraulic circuit with cooler
• Electronic control has built-in diagnostics and fault memory, event memory and programmable features
• Control throttle shifting
• Economy shift mode

1) Lock-up Torque Converter

Combines the maximum rimpull and cushioned shifting of torque converter drive with the efficiency and performance of direct drive. • Lock-up clutch quickly releases and re-engages during shifts, maintaining power wind-up, improving transmission life and increasing operator comfort

2) Planetary Power Shift Transmission

Utilizes a modulating pressure valve to regulate clutch pressure rise and fall to ease clutch engagement. This reduces shock loads on power train components. Features include:

• Large diameter clutches and robust planetary gears and bearings
• Patented rotating clutch pressure seals minimize drag losses and improve reliability
• 35 percent gear splits between all gears match Cat engine design for optimum use of engine power with minimized shifting and torque converter use

3) Final Drive

Final drive and differential torque multiplication of 17.48:1 further reduces stress on the drive train.

Axles

Full floating axles are shot-peened to relieve internal stresses and increase durability. Rolled splines also provide increased service life.

Wheel and Rims

Cast rear wheels and Cat center-mount rims are mounted using studs and nuts to minimize maintenance and maximize durability.

Transmission Chassis Controller (TCC)

TCC uses electronically transferred engine rpm data to execute shifts at preset points for optimum performance and efficiency. This integration allows:

• Programmable top gear limit
• Control throttle shifting
• Directional shift management
• Neutral coast inhibitor
• Economy shift mode

Integration

The Caterpillar power train integration provides increased component life and operator comfort.

Engine/Power Train Integration

Combining the electronic Engine Control Module (ECM) with the Caterpillar Transmission Chassis Controller (TCC) allows critical power train components to work more intelligently.

Integration

1) Electronic Technician 2) Cat Data Link System 3) Engine Control Module 4) Engine 5) Transmission Chassis Controller 6) Automatic Retarder Control, Traction Control System and Integrated Brake Controller 7) Caterpillar Electronic Monitoring System 8) Transmission 9) Oil-cooled Brakes

Cat Data Link

The Cat Data Link electronically integrates the machine's computer systems, which allows communications and provides the following benefits:

Elevated Idle Neutral Coast Inhibitor

Helps prevent the transmission from shifting to neutral at speeds above 6.5 km/h (4 mph).

Body-up Shift Inhibitor

Helps prevent the transmission from shifting above a pre-programmed gear without the body fully lowered.

Event Memory

Records machine management data that can be accessed using the Electronic Technician. Recorded information includes:

• Shift histograms
• Operator-induced events
• Lock-up clutch counter
• Machine overspeed
• Transmission overspeed

Electronic Technician (ET)

The electronic engine and transmission controls provide exhaustive diagnostic capability for service technicians. The ability to store both active and intermittent indicators will simplify problem diagnosis and reduce total repair time, resulting in improved mechanical availability and lower operating cost.

• ET accesses data stored in the engine and transmission controls via the Cat Data Link System.
• ET displays the status of all engine parameters including throttle position, timing and fuel flow.
• ET replaces 13 mechanical tools to perform functions like cylinder cutout checks, injector solenoid tests and timing calibration.

Caterpillar Electronic Monitoring System (CEMS)

CEMS allows the operator to view requested information and utilizes a three-category warning system to alert the operator to abnormal machine conditions.

Optional Attachments

Caterpillar offers optional attachments that integrate with the Cat Data Link System.

Oil Cooled, Rear Disc Brakes

Rear braking lets the operator concentrate on the haul road.

Brakes

1) Parking/Secondary Piston 2) Service/Retarding Piston 3) Friction Discs 4) Steel Plates 5) Actuating Springs 6) Cooling Oil In 7) Cooling Oil Out

Multiple Disc Brakes

Caterpillar forced oil-cooled, multiple disc brakes are continuously cooled for exceptional, fade-resistant braking and retarding. The optional ARC and TCS utilize the oil-cooled rear brakes to enhance truck performance and increase productivity.

Oil-Cooled Disc Brakes

Are designed and built for reliable, adjustment-free operation providing superior performance and service life in comparison to shoe-type and dry-disc systems.

Oil Film

An oil film prevents direct contact between the discs. Absorbing the braking forces by shearing oil and carrying heat away, this design extends brake life.

Secondary Braking

Spring applied, hydraulically released, oil-cooled disc brakes are located on the rear axle. The front brakes will activate as part of the secondary system, even if switched out of service.

Parking Brakes

Spring-applied, hydraulically released parking brakes use wet disc brakes in the service system. A toggle switch activates the parking brake.

Pistons

A Caterpillar patented, two-piston design combines the service, secondary and parking brakes, along with retarding functions. The primary piston hydraulically actuates both service and retarding functions. The secondary piston is spring-applied and held in the disengaged position by hydraulic pressure. If hydraulic system pressure drops below a certain level, the spring-applied secondary piston automatically applies the brakes.

Integrated Braking Control (IBC)

Electronically combines Automatic Retarding Control (ARC) and the Traction Control System (TCS) into one integrated control system.

Automatic Retarder Control (optional)

The ARC electronically controls braking on grade to maintain approximately 2,230 rpm (engine rpm is adjustable from 2,150-2,300 rpm in increments or 10 rpm). ARC is deactivated when the operator applies the brakes of throttle.

Engine Overspeed Protection

With the accelerator depressed and/or ARC turned off, ARC will automatically activate at 2,475 rpm to help avoid potentially destructive and often costly engine overspeeds.

ARC Benefits

Include:

• Increased operating efficiency with faster downhill speeds. By maintaining consistently higher engine speeds, average truck speed will be higher than a manually controlled truck.
• Excellent controllability and reduced operator effort. Automatic brake modulation provides a smoother ride over manual modulation, allowing the operator to focus more on truck operation down the haul road.
• Improved component life, optimized system cooling capability and reduced torque fluctuations result from ARC's precision.
• Faster troubleshooting and diagnosis with self-diagnostic capability and the ability to communicate with ET through the Cat Data Link System.
• Operator awareness through electronic integration and CEMS, alerting the operator to overspeed conditions and critical machine functions.

Traction Control System (Optional)

Monitors wheel slip so if it exceeds the set limit, the oil-cooled disc brakes are automatically applied to slow the spinning wheel.

Operator Awareness

An on-dash indicator shows the operator that TCS is engaged.

Differential Action

Utilizes normal differential action to provide superior maneuvering in poor underfoot conditions. Also reduces tire scuffing as compared to positive lock differentials used on other systems.

Torque

TCS divides torque equally to reduce stress created on final drives and axles when torque is transferred to one side.

System Back-up

Should sensors fail, the normal differential action is still available to maintain control and steering.

Structures

The backbone of the Cat off-highway truck.

Box-Section Design

The 775E frame uses a box-section design, incorporating 20 castings in high stress areas with deep penetrating and continuous wrap-around welding. Mild steel, which provides flexibility, durability and resistance to impact loads even in cold climates is used throughout.

Castings

Castings have large radii with internal reinforcing ribs to dissipate stress. Castings move welds to lower stress areas and provide two to three times the strength of equivalent sized fabricated structures.

Frame Features

Include:

• Integral front bumper
• Front box beams for suspension cylinder and ROPS support
• Box-section rear crossmember for body and ROPS support with attachment points for maintenance platform and rear engine hood hinge support
• Castings provide additional strength in critical stress areas
• Mild steel plates (290 MPa [42,000 psi] minimum yield strength) and castings (241 MPa [35,000 psi] minimum yield strength) provide flexibility, durability and easy field maintenance.

Frame Serviceability

The box-section frame allows simple access to power train components. This open design reduces overall removal and installation time, lowering repair costs. Transmission access is excellent under the raised and pinned body. Repairs can be made without preheating in ambient temperatures above 16° C (60° F) using readily available welding supplies.

Rollover Protection Structure (ROPS)

The ROPS attaches securely to four castings welded into the frame.

Suspension System

Designed to dissipate haul road and loading impacts for extended frame life. Four independent, self-contained, oil pneumatic, variable-rebound, suspension cylinders absorb shocks. Rear cylinders allow axle oscillation and absorb bending and twisting stresses. Front cylinders, mounted to the frame, serve as steering kingpins, providing excellent maneuverability and reduced maintenance. Caster and camber are preset.

Truck Body Options

Caterpillar builds a variety of rugged, durable bodies to perform in the toughest Quarry and Construction applications.

Design

775E bodies are designed to help you obtain the lowest cost-per-ton hauling solution in a variety of material conditions and densities.

Sidewall and Floor Junctions

Are joined by five-sided beams to resist impact loading and sustained hauling stresses.

Box-Section Beams

Offer increased durability in the floor, sidewalls, top rail, canopy corner and floor areas.

400 Brinell or HARDOX 400 Steel

Wear surfaces provide excellent wear resistance and are easily welded without preheating procedures. 400 Brinell steel is used in the dual slope construction body and the flat floor lined body. The flat floor quarry body is made from HARDOX 400 steel.

Two-Stage Hoist Cylinders

Provide fast dump cycle times of 9.5 seconds for raise and 12.5 seconds for lower.

Standard Body

Comes exhaust heated with options including a full-time muffler or exhaust diverter.

Custom Attachments

Including tail extensions, liner packages, sideboards and other custom designs are offered to help ensure rated payload and extend body life.

(1) Dual-Slope Construction Body

Offers the lowest cost-per-ton option in most construction applications.

Dual-Slope Body Performance

Efficient under most haul road conditions, but the dual-slope body's strength comes from higher levels of production in sites with rough haul roads and steeper grades.

Body Floor Construction

Uses an eight degree "V" bottom for increased load retention, a low center of gravity and reduced shock loading. It also aids in centering the load.

18 Degree Ducktail and 9 Degree Forward Body Slope

Retains the load on grades up to 15 percent and higher. This design also helps maintain proper load distribution.

(2) Flat Floor Quarry Body and Flat Floor Lined Body

Offers uniform dumping into hoppers, crushers and feeders.

• Flat floor design improves wear characteristics of body tail
• 12 degree forward body floor slope
• Choice of 400 Brinell steel or HARDOX 400 steel

Operator Station

Control ease and comfort maximize productivity.

775E Operator Station

Rated highly by operators with everything needed for top performance located at the operator's fingertips.

1) Wraparound Dash Panel

Offers an easy line-of-sight arrangement, using LED backlit rocker switches.

2) Caterpillar Contour Series Air Suspension Seat

Standard and fully adjustable, including an adjustable right-hand armrest.

3) Tilt-Telescoping Steering Wheel

With ergonomic grip improves comfort and control. Low effort steering system and ergonomically designed retarder lever reduces operator fatigue. Also includes an enhanced turn signal lever with high beam actuator and electric windshield wiper controls.

4) Transmission Console

Has LED backlit gear numbers and ergonomic shift knob.

5) Visibility

Exceptional all-around viewing area reduces fatigue and improves productivity.

6) Integral, Sound-Suppressed ROPS/FOPS Cab

Is resiliently mounted providing a quiet, protected work environment. The cab is radio-ready with speakers, wiring harness, antenna and mounting bracket.

7) Front Brake Cut-Out Switch

Increases front brake component life.

8) Large Storage Compartment

0.10 m3 (3.5 ft3) of storage space is located under the trainer's seat.

9) Trainer's Seat

Includes back rest and retractable seat belt.

10) Caterpillar Electronic Monitoring System (CEMS)

Provides critical data. The system features three separate displays:

• Four-gauge cluster with coolant temperature, oil temperature, brake air pressure, fuel level
• Tachometer, digital speedometer, actual gear indicator
• Message center module

11) Standard Heater and Optional Air Conditioner

Includes four-speed fan and nine vents.

12) Foot Pedals

Ergonomically designed for increased operator comfort.

13) Electric Power Window

For simplified operation.

14) Electrohydraulic Hoist Lever

Is fingertip actuated and provides low impact body-down snubbing.

15) Truck Production Management System (TPMS) (Optional)

Provides payload and cycle time data.

• Cat developed technology utilizes strut pressure sensors and an on-board microprocessor to determine payload weight
• Accurate under normal loading to within ± five percent over a normal operating shift
• Delivers consistent accurate payloads and improves efficiency by minimizing overloading and underloading

- On-board computer stores 1,400 cycles for further analysis of payload weight, cycle segment times, cycle segment distances and actual clock time and date of each cycle - External lights signal loading tool operator when payload is reached - Internal troubleshooting and fault recording for easier maintenance

Serviceability/Total Customer Support

Purchase of a Caterpillar machine includes a total commitment to customer support.

Cat QuickEvac™ System

Is an exclusive Caterpillar on-board engine oil evacuation and prelubrication system.

Automated Engine Oil Change

A new, state-of-the-art, on-board system evacuates engine sump in less than two minutes and allows for purge of oil filters prior to removal, minimizing oil spills. It delivers new oil through primary filters for filtered protection and ensures new filters are correctly filled following routine oil change.

Contamination Control

Environmentally efficient, clean oil changes are ensured since engine sump is evacuated directly into PM trucks or waste containers with flush faced, quick disconnects for fast evacuation and fill. This eliminates handling of waste oil, minimizes chances of oil spillage and enhances Contamination Control efforts by ensuring complete filtration of new oil on engine refill.

Complete Engine Prelubrication

Provides engine oil pressure prior to engine cranking. Reduces engine dry start wear and risk of cold starts for increased protection of key components.

Improved Serviceability and Machine Availability

Reduces time to complete engine service (changing engine oil, oil filters, fuel filter, air cleaner) by as much as 30 to 50 percent. Improves the ability to schedule engine services at prescribed hours, allows for servicing during normal working hours and integrates easily with PM trucks to further reduce total cycle time of engine service.

Machine Platform

Provides access to air tanks, brake master cylinder and make-up tank; engine oil level; air filters; steering hydraulic tanks; and battery compartment.

Ground Level Battery Disconnect Switch

Facilitates safe, convenient servicing and maintenance.

On-Board Diagnostics

With CEMS, provides the machine operator with a three-category warning system and quick access to stored diagnostic data.

Off-Board Diagnostics

With ET, allows service technicians access to stored diagnostics data reducing downtime and lowering operating costs. ET stores engine parameter information such as timing, throttle position and fuel flow. Transmission data is available through ET via access to the Cat Data Link System.

Radial Seal Filters

Are easy to change, reducing air filter maintenance times.

Vertical, Spin-On Filters

Provide for simplified servicing.

Quick Coupler Pressure Taps

Located in all hydraulic systems provide clear, quick pressure checks. S·O·SSM oil analysis points make oil sampling quick, clean and easy.

Sealed Electrical Connectors

Lock out dust and moisture. Color-coded wiring is standard for the entire Cat product line.

Machine Management Service

Cat dealers help manage equipment investments with:

• Vehicle systems analysis to help match the right machine to the job
• Preventative maintenance programs
• S·O·S oil analysis and technical analysis programs
• Repair option analysis
• Training for operators and mechanics
• TPMS data analysis

Parts Availability

The Caterpillar worldwide computer network locates parts instantly to minimize machine downtime.

Literature Support

Caterpillar manuals are easy to use and help provide the full value of an equipment investment.

Systems/Applications

The 775E is designed for versatility.

Machine Configuration Options

Caterpillar offers a variety of machine configuration options to help meet customer needs.

Body Options

Include a full line of standard and custom designs based on specific customer preference, material density, loading tool and site conditions.

Tire Options

A full line of tire options, representing various manufacturers, is offered by Caterpillar to maximize performance and life for specific applications.

Attachments

Give the customer options to tailor trucks for specific application requirements, including:

• Truck Production Management System
• Automatic Retarder Control
• Traction Control System
• Custom product offerings
• Muffler/exhaust diverter

System Approach

The Caterpillar system approach means increased efficiencies through common design. Haul trucks, loaders, excavators, tractors, engines for generator sets and pumps - all designed by Caterpillar - use common components, parts and design. Commonality reduces customer parts stock, improves parts availability, reduces training/maintenance and improves diagnostics. This system approach adds up to lower cost-per-ton. Dealer support is available to address customer needs regardless of the component.

Caterpillar Product Analysis Team (PAT)

Combined with Caterpillar software programs can assist customers with detailed, application evaluation.

Loader Match

Designed to work as part of a system, the 775E is best matched to the following Caterpillar loaders:

• 988G - five to six pass/match
• 990 Series II - four pass/match
• 992G - three pass/match
• 5130B - three to four pass/match

Air horn, electric

Air line dryer

Alternator, 50-amp

Auxiliary jump start receptacle

Back up alarm

Battery disconnect switch, ground level

Body mounting group

Brakes:

 Caliper disc (front)

 Oil-disc (rear)

 Parking

 Secondary

Caliper disc (front)

Oil-disc (rear)

Parking

Secondary

Brake (front) disconnect switch

Brake heat exchanger

Brake release motor for towing

Cab, ROPS:

 Caterpillar Contour Series air suspension seat

 Coat hook

 Insulated and sound-suppressed

 Radio ready

 Storage compartment

 Sun visor

 Tinted glass

Crankcase guard

Diagnostic connection port, 24-volt

Drive line guard

Electrical system, 24-volt

Electronic Monitoring System

Filters, spin-on

Gauges:

 Actual Gear Indicator

 Air pressure

 Brake oil temperature

 Coolant temperature

 Fuel gauge

 Hour meter, electric

 Odometer

 Speedometer

 Tachometer

Actual Gear Indicator

Air pressure

Brake oil temperature

Coolant temperature

Fuel gauge

Hour meter, electric

Odometer

Speedometer

Tachometer

Heat/defroster 11 070 kCal. (43,930 Btu)

Hoist lever, finger tip-actuated

Lighting system:

 Back up light

 Dome/courtesy light

 Hazard and directional signals, LED

 Headlights, Halogen, with dimmer

 Stop/tail lights, LED

Mirrors, right and left

Power port, 24-volt

Precleaner

QuickEvacTM System

Reservoirs (separate):

 Brake/hoist

 Steering

 Transmission/torque converter

Brake/hoist

Steering

Transmission/torque converter

Retarder

Rock ejectors

Seat belts, retractable

Seat, passenger

Service platform, bolt-on

Starting, electric

Steering, automatic supplemental, electric

Steering wheel, padded, tilt, telescopic

Tires, 24.00-35, radial

Tow hooks, front

Tow pin, rear

Transmission, electronically controlled automatic power shift

 with downshift/reverse shift inhibitor, neutralizer during dumping, neutral start switch, engine overspeed protection, directional shift management, programmable top gear, body-up shift limiter, economy shift mode and control throttle shifting

Vandalism protection locks

Window, electronic power (operator)

Windshield wipers and washer, electric intermittent