Engine

Base Power (1st gear) – Net	128.0 kW
Engine Model	Cat® C7 ACERT™
VHP – gears 1-2 Net	128.0 kW
VHP – gear 3 Net	135.0 kW
VHP – gears 4-8 Net	143.0 kW
VHP – gears 1-2 Gross	140.0 kW
VHP – gear 3 Gross	147.0 kW
VHP – gears 4-8 Gross	155.0 kW
Displacement	7.2 L
Bore	105.0 mm
Stroke	127.0 mm
Speed @ rated power	2000.0 RPM
Number of cylinders	6
Derating altitude	3048.0 m
High Ambient Capability	50.0 ° C
VHP Range – Net	128-143 kW (171-191 hp)
Base Power (1st gear) – Net (Metric)	128.0 kW
Fan Speed Maximum	1925.0 RPM
Maximum Torque Net	996.0 N·m
Torque Rise	46.0 %

Weights

Gross Vehicle Weight – Typically Equipped	17510.0 kg
Gross Vehicle Weight: Base – total	14292.0 kg
Gross Vehicle Weight: Maximum – total	22870.0 kg
Gross Vehicle Weight: Typically Equipped – front axle	5053.0 kg
Gross Vehicle Weight: Typically Equipped – rear axle	12457.0 kg
Gross Vehicle Weight: Typically Equipped – total	17510.0 kg
Gross Vehicle Weight: Base – front axle	4172.0 kg
Gross Vehicle Weight: Base – rear axle	10120.0 kg
Gross Vehicle Weight: Maximum – front axle	8005.0 kg
Gross Vehicle Weight: Maximum – rear axle	14866.0 kg

Moldboard

Blade Width	3.7 m
Moldboard – height	610.0 mm
Moldboard – thickness	22.0 mm
Arc Radius	413.0 mm
Throat Clearance	120.0 mm
Cutting Edge – width	152.0 mm
Cutting Edge – thickness	16.0 mm
End Bit – width	152.0 mm
End Bit – thickness	16.0 mm
Blade Pull – maximum GVW	13379.0 kg
Down Pressure – maximum GVW	13963.0 kg
Blade Pull – base GVW	9108.0 kg
Down Pressure – base GVW	7278.0 kg

Weights – Typically Equipped

Operating Weight – Typically Equipped	15108.0 kg
Gross Vehicle Weight	17510.0 kg

Power Train

Forward/Reverse Gears	8 forward/6 reverse
Transmission	Direct drive, Power shift
Brakes – Service	Air actuated, multiple oil-disc
Brakes – Service, surface area	23948.0 cm2
Brakes – Parking	Air actuated, multiple oil-disc
Brakes – Secondary	Dual circuit

Operating Specifications

Top Speed – forward	47.3 km/h
Top Speed – reverse	37.4 km/h
Turning Radius, outside front tires	7.5 m
Steering Range – left/right	47.5 Degrees
Articulation Angle – left/right	20.0 Degrees
Forward – 1st	4.1 km/h
Forward – 2nd	5.5 km/h
Forward – 3rd	8.0 km/h
Forward – 4th	11.0 km/h
Forward – 5th	17.4 km/h
Forward – 6th	23.6 km/h
Forward – 7th	32.5 km/h
Forward – 8th	47.3 km/h
Reverse – 1st	3.2 km/h
Reverse – 2nd	6.0 km/h
Reverse – 3rd	8.7 km/h
Reverse – 4th	13.7 km/h
Reverse – 5th	25.7 km/h
Reverse – 6th	37.4 km/h

Hydraulic System

Circuit Type	Load Sensing, Closed Center, Proportional Priority Pressure Compensating System
Pump Type	Variable Piston
Maximum System Pressure	25500.0 kPa
Standby Pressure	3600.0 kPa
Reservoir Tank Capacity	55.0 L
Optional High Output Pump	210.5 L/min
Pump Output Standard Pump	159.1 L/min

Blade Range

Circle Centershift – right	728.0 mm
Circle Centershift – left	752.0 mm
Moldboard Sideshift – right	663.0 mm
Moldboard Sideshift – left	512.0 mm
Maximum Blade Position Angle	90.0 Degrees
Blade Tip Range – forward	40.0 Degrees
Blade Tip Range – backward	5.0 Degrees
Maximum shoulder reach outside of tires – right	1978.0 mm
Maximum shoulder reach outside of tires – left	1896.0 mm
Maximum lift above ground	480.0 mm
Maximum depth of cut	735.0 mm

Ripper

Ripping depth – maximum	462.0 mm
Ripper shank holders, quantity	5
Ripper shank holder spacing	533.0 mm
Penetration force	8694.0 kg
Pryout force	11673.0 kg
Machine length increase, beam raised	970.0 mm
Scarifier shank holder quantity	9

Scarifier

Mid, V-Type: Working width	1184.0 mm
Mid, V-Type: Scarifying depth, maximum	229.0 mm
Mid, V-Type: Scarifier shank holders quantity	11
Mid, V-Type: Scarifier shank holder spacing	116.0 mm
Rear: Working width	2300.0 mm
Rear: Scarifying depth, maximum	266.0 mm
Rear: Scarifier shank holders quantity	9
Rear: Scarifier shank holder spacing	267.0 mm

Gross Vehicle Weight – Maximum

Gross Vehicle Weight

22870.0 kg

Frame

Front axle – total oscillation	32.0 Degrees
Front-section modulus – maximum	4785.0 cm3
Front-section modulus – minimum	2083.0 cm3
Circle – diameter	1530.0 mm
Circle – blade beam thickness	35.0 mm
Drawbar – height	127.0 mm
Drawbar – width	76.2 mm
Front axle – height to center	628.0 mm
Front axle – wheel lean, left/right	18.0 Degrees
Front-top/bottom plate – width	305.0 mm
Front-top/bottom plate – thickness	25.0 mm
Front-side plates – width	242.0 mm
Front-side plates – thickness	12.0 mm
Front-linear weights – minimum	165.0 kg/m
Front-linear weights – maximum	213.0 kg/m

Tandems

Height	506.0 mm
Width	201.0 mm
Sidewall thickness – inner	16.0 mm
Sidewall thickness – outer	18.0 mm
Drive chain pitch	51.0 mm
Wheel axle spacing	1522.0 mm
Tandem oscillation – front up	15.0 Degrees
Tandem oscillation – front down	25.0 Degrees

Service Refill

Fuel Capacity	305.0 L
Cooling system	40.0 L
Engine Oil	18.0 L
Transmission/Differential/Final Drives	60.0 L
Tandem housing (each)	64.0 L
Front wheel spindle bearing housing	0.5 L
Circle drive housing	7.0 L

Dimensions

Height – ROPS Cab	3354.0 mm
Height – Non-ROPS Cab	3348.0 mm
Height – ROPS Canopy	3354.0 mm
Ground Clearance – Center Front Axle	626.0 mm
Length – Between Tandem Axles	1523.0 mm
Length – Front Axle to Moldboard	2598.0 mm
Length – Front Axle to Mid Tandem	6086.0 mm
Length – Front Tire to Rear of Machine	8504.0 mm
Length – Counterweight to Ripper	10013.0 mm
Ground Clearance, Trans. Case	362.0 mm
Height – Top of Cylinders	3049.0 mm
Height to Exhaust Stack	2895.0 mm
Width – Tire Center Lines	2065.0 mm
Width – Outside Rear Tires	2452.0 mm
Width – Outside Front Tires	2481.0 mm

Standards

ROPS/FOPS	ISO 3471:1994/ISO 3449:2005
Steering	ISO 5010:2007
Brakes	ISO 3450:1996
Sound	ISO 6394:2008/ISO 6396:2008

Power Train

Reliable performance

Smooth Shifting Transmission

• Full Electronic Clutch Pressure Control ensures smooth shifting and directional changes.
• Shift Torque Management helps to smooth gear changes without the use of the inching pedal, helping the operator to remain focused on the task at hand.
• Load Compensation ensures consistent shift quality regardless of blade or machine load.
• Optional Autoshift automatically shifts the transmission at optimal points for easier operation.

Oil Disc Brakes - Completely Sealed, Adjustment Free

Oil-bathed, air actuated and spring-released, located at each tandem wheel to eliminate power train braking loads and to reduce service time. The large brake surface area provides dependable braking capability and extended life before rebuild.

Front Axle with Cat Live Spindle Design

Cat sealed spindle keeps the bearings free from contaminants and lubricated in a lightweight oil to reduce owning and operating costs. A larger tapered roller bearing is outboard where the load is greater, extending bearing life.

Cat C7 Engine

Maximum power and efficiency

Power Management

The Cat C7 engine with ACERT Technology uses electronic control, precision fuel delivery and refined air management to provide outstanding performance and lower emissions. Variable Horse Power (VHP) is standard to provide more power in the higher gears. The Electronic Throttle Control provides easier, more precise and consistent throttle operation. Engine Over-Speed Protection prevents downshifting until an acceptable safe travel speed has been established.

Hydraulics

Balanced hydraulics deliver consistent, precise and responsive control

Balanced Flow, Independent Oil Supply

Hydraulic flow is proportioned to ensure all implements operate simultaneously. Independent oil supply prevents cross-contamination and provides proper oil cooling, which means less heat build-up and extended component life.

Implement Control Valves

Provide outstanding operator “feel” and predictable system response for unmatched implement control. To help maintain exact blade settings, lock valves are built into all control valves. Line relief valves are also incorporated into selected control valves to protect the cylinders from over pressurization.

Load-Sensing Hydraulics

A load sensing variable displacement pump and advanced hydraulic valves provide superior implement control and better machine performance. Continuously matching hydraulic flow and pressure to power demands creates less heat and reduces power consumption.

Consistent and Predictable Movement

The hydraulic system valves are specifically designed for each hydraulic function on the motor grader. They compensate for differences in flow requirements, based on cylinder size and the difference in surface volume between the rod end (blue) and barrel end (red) of the cylinder. The result is predictable, consistent hydraulic speeds whether extending or retracting the cylinder.

Structures/Drawbar-Circle-Moldboard

Designed for strength and durability

Frame Structure - Provides Consistency and Strength

Front frame is a continuous top and bottom plate construction. Flanged box section design removes welds from high stress areas, improving reliability and durability. The rear frame structure has two box section channels with fully welded differential case for a solid working platform. An integrated bumper ties the rear frame together into a cohesive unit to handle high stress loads.

Drawbar, Circle and Moldboard

The K Series drawbar is designed for high strength and optimum durability for any application. The circle stands up to high stress loads. Raised wear surfaces prevent circle teeth wear against the drawbar. The 64 uniformly spaced circle teeth are flame cut and heat induction hardened to resist wear, and the circle is secured to the drawbar by six support shoes for maximum support. The moldboard provides optimal curvature and large throat clearance that helps move all soil types quickly and efficiently. These features deliver excellent load distribution and minimal material buildup in the circle area while allowing large blade loads to roll freely.

Blade Lift Accumulators

This optional feature uses accumulators to help absorb impact loads to the moldboard by allowing vertical blade travel. Blade lift accumulators reduce unnecessary wear and help to avoid unintended machine movement for increased operator safety.

Work Tools and Attachments

Allows expansion of machine versatility, utilization, and performance

Moldboard Options

Standard moldboard length is 3.7 m (12 ft), with an optional 4.3 m (14 ft) moldboard available from the factory. Moldboard extensions are available to increase moldboard surface area and extend reach capability.

Ground Engaging Tools

A wide variety of cutting edges and end bits are available, all designed for maximum service life and productivity.

Rear Ripper/Scarifier

The K Series optional ripper/scarifier is made to penetrate tough material fast and rip thoroughly for easier material movement with the moldboard. The ripper includes three shanks with the ability to add two more if needed. Nine scarifier shanks can also be added for additional versatility.

Front Mounted Groups

A front mounted push plate/counterweight or front blade can be ordered.

Mid-Mount Scarifier

Positioned between the front axle and the circle to break up tough material that the blade can then move, all in a single pass. The V-type scarifier can accommodate up to 11 teeth.

Snow Removal Work Tools

Includes snow wings, angle blades, and V-plows. Multiple mounting options are available, increasing machine versatility. (Availability may differ by region.)

Operator Station

Caterpillar sets the standard for comfort, convenience and visibility

Designed for Productivity

K Series cabs are designed to keep operators comfortable, relaxed and productive. Features like low effort pedals and controls, adjustable implement controls and adjustable steering wheel angle help make work easier on the operator. A clear view to the moldboard heel and tandem tires enhance productivity and safe operation. Rocker switches and transmission shifter are backlit for night time operation.

In-dash Instrument Cluster

The instrument panel, with easy-to read, high-visibility gauges and warning lamps, places vital machine information and diagnostic capability in easy view of the operator. The dash includes an engine coolant temperature gauge, an articulation gauge, voltage gauge and fuel level gauge. Service brake air pressure gauges are also standard. Speedometer and tachometer are optional. All major systems are monitored by warning lights.

Additional Cab Features

Additional cab features include storage area, an adjustable control console and coat hook. Optional offerings include power port, air conditioner/heater, suspension seat, defroster fan, sun shade, backup lights, Product Link™ ready, and AccuGrade™ System ready. NOTE: Some attachments are not available in all regions.

Integrated Technologies

Solutions to make work easier and more efficient

Cat AccuGrade

AccuGrade uses positioning and guidance technologies, machine sensors, and automatic blade control to help operators get to grade faster, easier and more efficiently. Digital design plans, real-time cut/fill data, and in-cab guidance give operators detailed information to work more confidently and achieve greater accuracy, in fewer passes, using less material. Operators can stay on grade and improve productivity and accuracy by nearly 50 percent over conventional methods. Grade stakes and checkers are minimized, making the work site safe, efficient, and cost effective. AccuGrade technologies include Cross Slope, Sonic, Laser, GPS, and/or Universal Total Station (UTS).

AccuGrade Attachment Ready Option (ARO)

K Series machines can be equipped with the AccuGrade ARO. It can be ordered as a factory or dealer installed option. The attachment option includes built-in mounting points and internal wiring, making installation of the AccuGrade grade control system faster and easier.

Cat Product Link

Product Link helps take the guesswork out of equipment management with remote monitoring capabilities for your machine or your entire fleet. Track asset location, hours, fuel usage, diagnostic codes, idle time and more through the secure VisionLink™ user interface. Knowing where your equipment is, what it’s doing and how it’s performing enables you or your Cat dealer to manage your fleet in real-time so you can maximize efficiency, improve productivity, and lower operating costs.

Safety

Designed with safety in mind

ROPS/FOPS Cab Offers Low Sound and Vibration Levels

The operator sound pressure level for the cab offered by Caterpillar, when properly installed, maintained and tested with the doors closed, meets or exceeds requirements set forth in ISO 6394:2008. The quiet environment helps improve operator working conditions.

Brake Systems and Machine Protection

Brakes located at each tandem wheel offer the largest total brake surface area in the industry, delivering dependable stopping power and longer brake life. Standard circle drive slip clutch protects the drawbar, circle and moldboard from shock loads when the blade encounters an immovable object. Blade lift accumulators help absorb impact loads to the moldboard by allowing vertical blade travel.

Electrical Disconnect Switch and Engine Shutoff Switch

Disconnect switch provides ground-level lockout of the electrical system to prevent inadvertent machine starts. Engine shutoff allows anyone nearby to shut the machine down in case of an emergency.

Additional Safety Features

Laminated glass on the front windows and lockable doors to reduce theft and vandalism are available with the optional cab. Brake lights, conveniently located grab rails, back up lights and alarm also help ensure a safe work environment.

Complete Customer Support

When uptime counts

Renowned Cat Dealer Support

From helping you choose the right machine to ongoing support, your Cat dealer provides the best in sales and service. Manage your costs with preventive maintenance programs like S•O•SSM fluids analysis, coolant sampling and guaranteed maintenance contracts. Stay productive with best-in-class parts availability. Your Cat dealer can help you boost your profits with operator training. And when it’s time for component replacement, your Cat dealer can help you save even more. Genuine Cat Remanufactured parts carry the same warranty and reliability as new products at savings of 40 to 70 percent for power train and hydraulic components.

Sustainability

Thinking generations ahead

• Integrated machine systems and technologies improve productivity for greater accuracy, lower fuel use and reduced machine wear.
• Replaceable wear parts save maintenance time and cost, and extend major component life.
• Ecology drains help make draining fluids more convenient and help prevent spills.
• Major components are built to be rebuilt, eliminating waste and saving customers money by giving the machine and/or major components a second - and even third life.
• A variety of safety features help safeguard operators and others on the job site.

Serviceability

Convenient service points make routine maintenance quick and easy

Grouped Service Points on the left side to help ensure proper maintenance

Easy access to service areas speeds up maintenance and ensures that routine service is performed on time. Ecology drains shorten service times and help prevent spills. Radiator cleanout access gives the operator the ability to clear away debris and other materials that build up around the radiator.

Extended Service Intervals Reduce Downtime, Operating Cost

• 500 hour engine oil changes
• 4,000 hour hydraulic oil changes
• 12,000 hour engine coolant changes

Diagnostics and Machine Monitoring

The dash cluster panel provides enhanced machine information and diagnostic capability, which allows faster servicing of the transmission and engine.

O-Ring Face Seals

O-Ring face seals create a reliable connection and are used in all hydraulic circuits to minimize the possibility of oil leaks.

Separate Wiring Harnesses

Modular harness design provides simple disconnects for major machine repairs or rebuilds which reduces machine downtime.

Cat Electronic Technician

Cat Electronic Technician is a two-way communication tool that gives service technicians easy access to stored diagnostic data, reducing machine downtime and lowering operating costs.

ELECTRICAL

 Alternator, 115 Ampere

 Backup alarm, reversing lights

 Batteries, maintenance free 750 CCA

 Electrical system, 24 volt

 Horn, electric

 Lights, stop and tail

 Motor, starting

 Product Link Ready

 Working lights

OPERATOR ENVIRONMENT

 Accelerator

 Control console, adjustable

 Gauge cluster (includes voltmeter, articulation, engine coolant temperature, air brake pressure and fuel level)

 Guard rails, operator station

 Hydraulic controls, load sensing (right/left blade lift, circle drive, centershift, sideshift, front wheel lean and articulation)

 Indicator lights (includes high beam, LH and RH turn, low engine oil pressure, throttle lock, check engine, transmission filter bypass and check, centershift pin, brake air pressure, parking brake engaged, auto shift)

 Key start/stop switch

 Meter, hour

 Power steering, hydraulic

 Seat, vinyl-covered static

 Seat belt

 Steering wheel, tilt, adjustable

 Storage area, cooler/lunch box

 Throttle, electronic control

Accelerator

 Alternator, 115 Ampere

 Backup alarm, reversing lights

 Batteries, maintenance free 750 CCA

 Common fuse block

 Electrical system, 24 volt

 Horn, electric

 Indication display

 Lights, stop and tail

 Motor, starting

 Product Link Ready

 Working lights

 Accelerator

 Control console, adjustable

 Gauge cluster (includes voltmeter, articulation, engine coolant temperature, air brake pressure and fuel level)

 Guard rails, operator station

 Hydraulic controls, load sensing (right/left blade lift, circle drive, centershift, sideshift, front wheel lean and articulation)

 Indicator lights (includes high beam, LH and RH turn, low engine oil pressure, throttle lock, check engine, transmission filter bypass and check, centershift pin, brake air pressure, parking brake engaged, auto shift)

 Key start/stop switch

 Meter, hour

 Power steering, hydraulic

 Seat, vinyl-covered static

 Seat belt

 Steering wheel, tilt, adjustable

 Storage area, cooler/lunch box

 Throttle, electronic control

 Air cleaner, dry type radial seal with service indicator and automatic dust ejector

 Air to air after cooler (ATAAC)

 Blower fan

 Brakes, oil disc, four-wheel air actuated

 Differential with lock/unlock

 Eco mode

 Engine idle shutdown

 Engine, Cat C7 with ACERT Technology, diesel with automatic engine derate and idle control<br>– 140K meets U.S. EPA Tier 3/EU Stage IIIA or Tier 2/Stage II equivalent emission standards and Brazil MAR-1 Nonroad emission standards, depending on

 Fuel water separator

 Muffler, under hood

 Next gen filter design

 Parking brake, multi-disc, sealed and oil cooled

 Prescreener

 Priming pump, fuel, resiliently mounted

 Sediment drain, fuel tank

 Tandem drive

 Transmission, 8 speed forward and 6 speed reverse, power shift, direct drive with electronic shift control and overspeed protection

 VHP (Variable Horse Power)

 Blade Float

 Bumper, rear

 CD ROM Parts Book

 Circle drive slip clutch

 Cutting edges, 152 mm × 16 mm (6 in × 5⁄8 in) curved DH-2 steel

 Doors, engine compartment

 Drawbar, 6 shoe replaceable nylon composite wear strips

 Endbits, 16 mm (5/8 in) DH-2 steel

 Frame, articulated with safety lock

 Fuel tank, 305 L (80.6 gal)

 Ground level engine shutdown

 Link bar, 7 position

 Moldboard, 3658 mm × 610 mm × 22 mm (12 ft × 24 in × 7⁄8 in) blade with hydraulic sideshift and mechanical tip

 S·O·S ports, engine, hydraulic, transmission and cooling

 Toolbox with padlock

 Vandalism protection – including cap locks for hydraulic tank, radiator access cover, fuel tank, engine and transmission oil check/fill and lockable battery boxes.

 Extended Life Coolant to –35° C (–30° F)

Control console, adjustable

 Alternator, 115 Ampere

 Backup alarm, reversing lights

 Batteries, maintenance free 750 CCA

 Common fuse block

 Electrical system, 24 volt

 Horn, electric

 Indication display

 Lights, stop and tail

 Motor, starting

 Product Link Ready

 Working lights

 Accelerator

 Control console, adjustable

 Gauge cluster (includes voltmeter, articulation, engine coolant temperature, air brake pressure and fuel level)

 Guard rails, operator station

 Hydraulic controls, load sensing (right/left blade lift, circle drive, centershift, sideshift, front wheel lean and articulation)

 Indicator lights (includes high beam, LH and RH turn, low engine oil pressure, throttle lock, check engine, transmission filter bypass and check, centershift pin, brake air pressure, parking brake engaged, auto shift)

 Key start/stop switch

 Meter, hour

 Power steering, hydraulic

 Seat, vinyl-covered static

 Seat belt

 Steering wheel, tilt, adjustable

 Storage area, cooler/lunch box

 Throttle, electronic control

 Air cleaner, dry type radial seal with service indicator and automatic dust ejector

 Air to air after cooler (ATAAC)

 Blower fan

 Brakes, oil disc, four-wheel air actuated

 Differential with lock/unlock

 Eco mode

 Engine idle shutdown

 Engine, Cat C7 with ACERT Technology, diesel with automatic engine derate and idle control<br>– 140K meets U.S. EPA Tier 3/EU Stage IIIA or Tier 2/Stage II equivalent emission standards and Brazil MAR-1 Nonroad emission standards, depending on

 Fuel water separator

 Muffler, under hood

 Next gen filter design

 Parking brake, multi-disc, sealed and oil cooled

 Prescreener

 Priming pump, fuel, resiliently mounted

 Sediment drain, fuel tank

 Tandem drive

 Transmission, 8 speed forward and 6 speed reverse, power shift, direct drive with electronic shift control and overspeed protection

 VHP (Variable Horse Power)

 Blade Float

 Bumper, rear

 CD ROM Parts Book

 Circle drive slip clutch

 Cutting edges, 152 mm × 16 mm (6 in × 5⁄8 in) curved DH-2 steel

 Doors, engine compartment

 Drawbar, 6 shoe replaceable nylon composite wear strips

 Endbits, 16 mm (5/8 in) DH-2 steel

 Frame, articulated with safety lock

 Fuel tank, 305 L (80.6 gal)

 Ground level engine shutdown

 Link bar, 7 position

 Moldboard, 3658 mm × 610 mm × 22 mm (12 ft × 24 in × 7⁄8 in) blade with hydraulic sideshift and mechanical tip

 S·O·S ports, engine, hydraulic, transmission and cooling

 Toolbox with padlock

 Vandalism protection – including cap locks for hydraulic tank, radiator access cover, fuel tank, engine and transmission oil check/fill and lockable battery boxes.

 Extended Life Coolant to –35° C (–30° F)

Gauge cluster (includes voltmeter, articulation, engine coolant temperature, air brake pressure and fuel level)

 Alternator, 115 Ampere

 Backup alarm, reversing lights

 Batteries, maintenance free 750 CCA

 Common fuse block

 Electrical system, 24 volt

 Horn, electric

 Indication display

 Lights, stop and tail

 Motor, starting

 Product Link Ready

 Working lights

 Accelerator

 Control console, adjustable

 Gauge cluster (includes voltmeter, articulation, engine coolant temperature, air brake pressure and fuel level)

 Guard rails, operator station

 Hydraulic controls, load sensing (right/left blade lift, circle drive, centershift, sideshift, front wheel lean and articulation)

 Indicator lights (includes high beam, LH and RH turn, low engine oil pressure, throttle lock, check engine, transmission filter bypass and check, centershift pin, brake air pressure, parking brake engaged, auto shift)

 Key start/stop switch

 Meter, hour

 Power steering, hydraulic

 Seat, vinyl-covered static

 Seat belt

 Steering wheel, tilt, adjustable

 Storage area, cooler/lunch box

 Throttle, electronic control

 Air cleaner, dry type radial seal with service indicator and automatic dust ejector

 Air to air after cooler (ATAAC)

 Blower fan

 Brakes, oil disc, four-wheel air actuated

 Differential with lock/unlock

 Eco mode

 Engine idle shutdown

 Engine, Cat C7 with ACERT Technology, diesel with automatic engine derate and idle control<br>– 140K meets U.S. EPA Tier 3/EU Stage IIIA or Tier 2/Stage II equivalent emission standards and Brazil MAR-1 Nonroad emission standards, depending on

 Fuel water separator

 Muffler, under hood

 Next gen filter design

 Parking brake, multi-disc, sealed and oil cooled

 Prescreener

 Priming pump, fuel, resiliently mounted

 Sediment drain, fuel tank

 Tandem drive

 Transmission, 8 speed forward and 6 speed reverse, power shift, direct drive with electronic shift control and overspeed protection

 VHP (Variable Horse Power)

 Blade Float

 Bumper, rear

 CD ROM Parts Book

 Circle drive slip clutch

 Cutting edges, 152 mm × 16 mm (6 in × 5⁄8 in) curved DH-2 steel

 Doors, engine compartment

 Drawbar, 6 shoe replaceable nylon composite wear strips

 Endbits, 16 mm (5/8 in) DH-2 steel

 Frame, articulated with safety lock

 Fuel tank, 305 L (80.6 gal)

 Ground level engine shutdown

 Link bar, 7 position

 Moldboard, 3658 mm × 610 mm × 22 mm (12 ft × 24 in × 7⁄8 in) blade with hydraulic sideshift and mechanical tip

 S·O·S ports, engine, hydraulic, transmission and cooling

 Toolbox with padlock

 Vandalism protection – including cap locks for hydraulic tank, radiator access cover, fuel tank, engine and transmission oil check/fill and lockable battery boxes.

 Extended Life Coolant to –35° C (–30° F)

Guard rails, operator station

 Alternator, 115 Ampere

 Backup alarm, reversing lights

 Batteries, maintenance free 750 CCA

 Common fuse block

 Electrical system, 24 volt

 Horn, electric

 Indication display

 Lights, stop and tail

 Motor, starting

 Product Link Ready

 Working lights

 Accelerator

 Control console, adjustable

 Gauge cluster (includes voltmeter, articulation, engine coolant temperature, air brake pressure and fuel level)

 Guard rails, operator station

 Hydraulic controls, load sensing (right/left blade lift, circle drive, centershift, sideshift, front wheel lean and articulation)

 Indicator lights (includes high beam, LH and RH turn, low engine oil pressure, throttle lock, check engine, transmission filter bypass and check, centershift pin, brake air pressure, parking brake engaged, auto shift)

 Key start/stop switch

 Meter, hour

 Power steering, hydraulic

 Seat, vinyl-covered static

 Seat belt

 Steering wheel, tilt, adjustable

 Storage area, cooler/lunch box

 Throttle, electronic control

 Air cleaner, dry type radial seal with service indicator and automatic dust ejector

 Air to air after cooler (ATAAC)

 Blower fan

 Brakes, oil disc, four-wheel air actuated

 Differential with lock/unlock

 Eco mode

 Engine idle shutdown

 Engine, Cat C7 with ACERT Technology, diesel with automatic engine derate and idle control<br>– 140K meets U.S. EPA Tier 3/EU Stage IIIA or Tier 2/Stage II equivalent emission standards and Brazil MAR-1 Nonroad emission standards, depending on

 Fuel water separator

 Muffler, under hood

 Next gen filter design

 Parking brake, multi-disc, sealed and oil cooled

 Prescreener

 Priming pump, fuel, resiliently mounted

 Sediment drain, fuel tank

 Tandem drive

 Transmission, 8 speed forward and 6 speed reverse, power shift, direct drive with electronic shift control and overspeed protection

 VHP (Variable Horse Power)

 Blade Float

 Bumper, rear

 CD ROM Parts Book

 Circle drive slip clutch

 Cutting edges, 152 mm × 16 mm (6 in × 5⁄8 in) curved DH-2 steel

 Doors, engine compartment

 Drawbar, 6 shoe replaceable nylon composite wear strips

 Endbits, 16 mm (5/8 in) DH-2 steel

 Frame, articulated with safety lock

 Fuel tank, 305 L (80.6 gal)

 Ground level engine shutdown

 Link bar, 7 position

 Moldboard, 3658 mm × 610 mm × 22 mm (12 ft × 24 in × 7⁄8 in) blade with hydraulic sideshift and mechanical tip

 S·O·S ports, engine, hydraulic, transmission and cooling

 Toolbox with padlock

 Vandalism protection – including cap locks for hydraulic tank, radiator access cover, fuel tank, engine and transmission oil check/fill and lockable battery boxes.

 Extended Life Coolant to –35° C (–30° F)

Hydraulic controls, load sensing (right/left blade lift, circle drive, centershift, sideshift, front wheel lean and articulation)

 Alternator, 115 Ampere

 Backup alarm, reversing lights

 Batteries, maintenance free 750 CCA

 Common fuse block

 Electrical system, 24 volt

 Horn, electric

 Indication display

 Lights, stop and tail

 Motor, starting

 Product Link Ready

 Working lights

 Accelerator

 Control console, adjustable

 Gauge cluster (includes voltmeter, articulation, engine coolant temperature, air brake pressure and fuel level)

 Guard rails, operator station

 Hydraulic controls, load sensing (right/left blade lift, circle drive, centershift, sideshift, front wheel lean and articulation)

 Indicator lights (includes high beam, LH and RH turn, low engine oil pressure, throttle lock, check engine, transmission filter bypass and check, centershift pin, brake air pressure, parking brake engaged, auto shift)

 Key start/stop switch

 Meter, hour

 Power steering, hydraulic

 Seat, vinyl-covered static

 Seat belt

 Steering wheel, tilt, adjustable

 Storage area, cooler/lunch box

 Throttle, electronic control

 Air cleaner, dry type radial seal with service indicator and automatic dust ejector

 Air to air after cooler (ATAAC)

 Blower fan

 Brakes, oil disc, four-wheel air actuated

 Differential with lock/unlock

 Eco mode

 Engine idle shutdown

 Engine, Cat C7 with ACERT Technology, diesel with automatic engine derate and idle control<br>– 140K meets U.S. EPA Tier 3/EU Stage IIIA or Tier 2/Stage II equivalent emission standards and Brazil MAR-1 Nonroad emission standards, depending on

 Fuel water separator

 Muffler, under hood

 Next gen filter design

 Parking brake, multi-disc, sealed and oil cooled

 Prescreener

 Priming pump, fuel, resiliently mounted

 Sediment drain, fuel tank

 Tandem drive

 Transmission, 8 speed forward and 6 speed reverse, power shift, direct drive with electronic shift control and overspeed protection

 VHP (Variable Horse Power)

 Blade Float

 Bumper, rear

 CD ROM Parts Book

 Circle drive slip clutch

 Cutting edges, 152 mm × 16 mm (6 in × 5⁄8 in) curved DH-2 steel

 Doors, engine compartment

 Drawbar, 6 shoe replaceable nylon composite wear strips

 Endbits, 16 mm (5/8 in) DH-2 steel

 Frame, articulated with safety lock

 Fuel tank, 305 L (80.6 gal)

 Ground level engine shutdown

 Link bar, 7 position

 Moldboard, 3658 mm × 610 mm × 22 mm (12 ft × 24 in × 7⁄8 in) blade with hydraulic sideshift and mechanical tip

 S·O·S ports, engine, hydraulic, transmission and cooling

 Toolbox with padlock

 Vandalism protection – including cap locks for hydraulic tank, radiator access cover, fuel tank, engine and transmission oil check/fill and lockable battery boxes.

 Extended Life Coolant to –35° C (–30° F)

Indicator lights (includes high beam, LH and RH turn, low engine oil pressure, throttle lock, check engine, transmission filter bypass and check, centershift pin, brake air pressure, parking brake engaged, auto shift)

 Alternator, 115 Ampere

 Backup alarm, reversing lights

 Batteries, maintenance free 750 CCA

 Common fuse block

 Electrical system, 24 volt

 Horn, electric

 Indication display

 Lights, stop and tail

 Motor, starting

 Product Link Ready

 Working lights

 Accelerator

 Control console, adjustable

 Gauge cluster (includes voltmeter, articulation, engine coolant temperature, air brake pressure and fuel level)

 Guard rails, operator station

 Hydraulic controls, load sensing (right/left blade lift, circle drive, centershift, sideshift, front wheel lean and articulation)

 Indicator lights (includes high beam, LH and RH turn, low engine oil pressure, throttle lock, check engine, transmission filter bypass and check, centershift pin, brake air pressure, parking brake engaged, auto shift)

 Key start/stop switch

 Meter, hour

 Power steering, hydraulic

 Seat, vinyl-covered static

 Seat belt

 Steering wheel, tilt, adjustable

 Storage area, cooler/lunch box

 Throttle, electronic control

 Air cleaner, dry type radial seal with service indicator and automatic dust ejector

 Air to air after cooler (ATAAC)

 Blower fan

 Brakes, oil disc, four-wheel air actuated

 Differential with lock/unlock

 Eco mode

 Engine idle shutdown

 Engine, Cat C7 with ACERT Technology, diesel with automatic engine derate and idle control<br>– 140K meets U.S. EPA Tier 3/EU Stage IIIA or Tier 2/Stage II equivalent emission standards and Brazil MAR-1 Nonroad emission standards, depending on

 Fuel water separator

 Muffler, under hood

 Next gen filter design

 Parking brake, multi-disc, sealed and oil cooled

 Prescreener

 Priming pump, fuel, resiliently mounted

 Sediment drain, fuel tank

 Tandem drive

 Transmission, 8 speed forward and 6 speed reverse, power shift, direct drive with electronic shift control and overspeed protection

 VHP (Variable Horse Power)

 Blade Float

 Bumper, rear

 CD ROM Parts Book

 Circle drive slip clutch

 Cutting edges, 152 mm × 16 mm (6 in × 5⁄8 in) curved DH-2 steel

 Doors, engine compartment

 Drawbar, 6 shoe replaceable nylon composite wear strips

 Endbits, 16 mm (5/8 in) DH-2 steel

 Frame, articulated with safety lock

 Fuel tank, 305 L (80.6 gal)

 Ground level engine shutdown

 Link bar, 7 position

 Moldboard, 3658 mm × 610 mm × 22 mm (12 ft × 24 in × 7⁄8 in) blade with hydraulic sideshift and mechanical tip

 S·O·S ports, engine, hydraulic, transmission and cooling

 Toolbox with padlock

 Vandalism protection – including cap locks for hydraulic tank, radiator access cover, fuel tank, engine and transmission oil check/fill and lockable battery boxes.

 Extended Life Coolant to –35° C (–30° F)

Key start/stop switch

 Alternator, 115 Ampere

 Backup alarm, reversing lights

 Batteries, maintenance free 750 CCA

 Common fuse block

 Electrical system, 24 volt

 Horn, electric

 Indication display

 Lights, stop and tail

 Motor, starting

 Product Link Ready

 Working lights

 Accelerator

 Control console, adjustable

 Gauge cluster (includes voltmeter, articulation, engine coolant temperature, air brake pressure and fuel level)

 Guard rails, operator station

 Hydraulic controls, load sensing (right/left blade lift, circle drive, centershift, sideshift, front wheel lean and articulation)

 Indicator lights (includes high beam, LH and RH turn, low engine oil pressure, throttle lock, check engine, transmission filter bypass and check, centershift pin, brake air pressure, parking brake engaged, auto shift)

 Key start/stop switch

 Meter, hour

 Power steering, hydraulic

 Seat, vinyl-covered static

 Seat belt

 Steering wheel, tilt, adjustable

 Storage area, cooler/lunch box

 Throttle, electronic control

 Air cleaner, dry type radial seal with service indicator and automatic dust ejector

 Air to air after cooler (ATAAC)

 Blower fan

 Brakes, oil disc, four-wheel air actuated

 Differential with lock/unlock

 Eco mode

 Engine idle shutdown

 Engine, Cat C7 with ACERT Technology, diesel with automatic engine derate and idle control<br>– 140K meets U.S. EPA Tier 3/EU Stage IIIA or Tier 2/Stage II equivalent emission standards and Brazil MAR-1 Nonroad emission standards, depending on

 Fuel water separator

 Muffler, under hood

 Next gen filter design

 Parking brake, multi-disc, sealed and oil cooled

 Prescreener

 Priming pump, fuel, resiliently mounted

 Sediment drain, fuel tank

 Tandem drive

 Transmission, 8 speed forward and 6 speed reverse, power shift, direct drive with electronic shift control and overspeed protection

 VHP (Variable Horse Power)

 Blade Float

 Bumper, rear

 CD ROM Parts Book

 Circle drive slip clutch

 Cutting edges, 152 mm × 16 mm (6 in × 5⁄8 in) curved DH-2 steel

 Doors, engine compartment

 Drawbar, 6 shoe replaceable nylon composite wear strips

 Endbits, 16 mm (5/8 in) DH-2 steel

 Frame, articulated with safety lock

 Fuel tank, 305 L (80.6 gal)

 Ground level engine shutdown

 Link bar, 7 position

 Moldboard, 3658 mm × 610 mm × 22 mm (12 ft × 24 in × 7⁄8 in) blade with hydraulic sideshift and mechanical tip

 S·O·S ports, engine, hydraulic, transmission and cooling

 Toolbox with padlock

 Vandalism protection – including cap locks for hydraulic tank, radiator access cover, fuel tank, engine and transmission oil check/fill and lockable battery boxes.

 Extended Life Coolant to –35° C (–30° F)

Meter, hour

 Alternator, 115 Ampere

 Backup alarm, reversing lights

 Batteries, maintenance free 750 CCA

 Common fuse block

 Electrical system, 24 volt

 Horn, electric

 Indication display

 Lights, stop and tail

 Motor, starting

 Product Link Ready

 Working lights

 Accelerator

 Control console, adjustable

 Gauge cluster (includes voltmeter, articulation, engine coolant temperature, air brake pressure and fuel level)

 Guard rails, operator station

 Hydraulic controls, load sensing (right/left blade lift, circle drive, centershift, sideshift, front wheel lean and articulation)

 Indicator lights (includes high beam, LH and RH turn, low engine oil pressure, throttle lock, check engine, transmission filter bypass and check, centershift pin, brake air pressure, parking brake engaged, auto shift)

 Key start/stop switch

 Meter, hour

 Power steering, hydraulic

 Seat, vinyl-covered static

 Seat belt

 Steering wheel, tilt, adjustable

 Storage area, cooler/lunch box

 Throttle, electronic control

 Air cleaner, dry type radial seal with service indicator and automatic dust ejector

 Air to air after cooler (ATAAC)

 Blower fan

 Brakes, oil disc, four-wheel air actuated

 Differential with lock/unlock

 Eco mode

 Engine idle shutdown

 Engine, Cat C7 with ACERT Technology, diesel with automatic engine derate and idle control<br>– 140K meets U.S. EPA Tier 3/EU Stage IIIA or Tier 2/Stage II equivalent emission standards and Brazil MAR-1 Nonroad emission standards, depending on

 Fuel water separator

 Muffler, under hood

 Next gen filter design

 Parking brake, multi-disc, sealed and oil cooled

 Prescreener

 Priming pump, fuel, resiliently mounted

 Sediment drain, fuel tank

 Tandem drive

 Transmission, 8 speed forward and 6 speed reverse, power shift, direct drive with electronic shift control and overspeed protection

 VHP (Variable Horse Power)

 Blade Float

 Bumper, rear

 CD ROM Parts Book

 Circle drive slip clutch

 Cutting edges, 152 mm × 16 mm (6 in × 5⁄8 in) curved DH-2 steel

 Doors, engine compartment

 Drawbar, 6 shoe replaceable nylon composite wear strips

 Endbits, 16 mm (5/8 in) DH-2 steel

 Frame, articulated with safety lock

 Fuel tank, 305 L (80.6 gal)

 Ground level engine shutdown

 Link bar, 7 position

 Moldboard, 3658 mm × 610 mm × 22 mm (12 ft × 24 in × 7⁄8 in) blade with hydraulic sideshift and mechanical tip

 S·O·S ports, engine, hydraulic, transmission and cooling

 Toolbox with padlock

 Vandalism protection – including cap locks for hydraulic tank, radiator access cover, fuel tank, engine and transmission oil check/fill and lockable battery boxes.

 Extended Life Coolant to –35° C (–30° F)

Power steering, hydraulic

 Alternator, 115 Ampere

 Backup alarm, reversing lights

 Batteries, maintenance free 750 CCA

 Common fuse block

 Electrical system, 24 volt

 Horn, electric

 Indication display

 Lights, stop and tail

 Motor, starting

 Product Link Ready

 Working lights

 Accelerator

 Control console, adjustable

 Gauge cluster (includes voltmeter, articulation, engine coolant temperature, air brake pressure and fuel level)

 Guard rails, operator station

 Hydraulic controls, load sensing (right/left blade lift, circle drive, centershift, sideshift, front wheel lean and articulation)

 Indicator lights (includes high beam, LH and RH turn, low engine oil pressure, throttle lock, check engine, transmission filter bypass and check, centershift pin, brake air pressure, parking brake engaged, auto shift)

 Key start/stop switch

 Meter, hour

 Power steering, hydraulic

 Seat, vinyl-covered static

 Seat belt

 Steering wheel, tilt, adjustable

 Storage area, cooler/lunch box

 Throttle, electronic control

 Air cleaner, dry type radial seal with service indicator and automatic dust ejector

 Air to air after cooler (ATAAC)

 Blower fan

 Brakes, oil disc, four-wheel air actuated

 Differential with lock/unlock

 Eco mode

 Engine idle shutdown

 Engine, Cat C7 with ACERT Technology, diesel with automatic engine derate and idle control<br>– 140K meets U.S. EPA Tier 3/EU Stage IIIA or Tier 2/Stage II equivalent emission standards and Brazil MAR-1 Nonroad emission standards, depending on

 Fuel water separator

 Muffler, under hood

 Next gen filter design

 Parking brake, multi-disc, sealed and oil cooled

 Prescreener

 Priming pump, fuel, resiliently mounted

 Sediment drain, fuel tank

 Tandem drive

 Transmission, 8 speed forward and 6 speed reverse, power shift, direct drive with electronic shift control and overspeed protection

 VHP (Variable Horse Power)

 Blade Float

 Bumper, rear

 CD ROM Parts Book

 Circle drive slip clutch

 Cutting edges, 152 mm × 16 mm (6 in × 5⁄8 in) curved DH-2 steel

 Doors, engine compartment

 Drawbar, 6 shoe replaceable nylon composite wear strips

 Endbits, 16 mm (5/8 in) DH-2 steel

 Frame, articulated with safety lock

 Fuel tank, 305 L (80.6 gal)

 Ground level engine shutdown

 Link bar, 7 position

 Moldboard, 3658 mm × 610 mm × 22 mm (12 ft × 24 in × 7⁄8 in) blade with hydraulic sideshift and mechanical tip

 S·O·S ports, engine, hydraulic, transmission and cooling

 Toolbox with padlock

 Vandalism protection – including cap locks for hydraulic tank, radiator access cover, fuel tank, engine and transmission oil check/fill and lockable battery boxes.

 Extended Life Coolant to –35° C (–30° F)

Seat, vinyl-covered static

 Alternator, 115 Ampere

 Backup alarm, reversing lights

 Batteries, maintenance free 750 CCA

 Common fuse block

 Electrical system, 24 volt

 Horn, electric

 Indication display

 Lights, stop and tail

 Motor, starting

 Product Link Ready

 Working lights

 Accelerator

 Control console, adjustable

 Gauge cluster (includes voltmeter, articulation, engine coolant temperature, air brake pressure and fuel level)

 Guard rails, operator station

 Hydraulic controls, load sensing (right/left blade lift, circle drive, centershift, sideshift, front wheel lean and articulation)

 Indicator lights (includes high beam, LH and RH turn, low engine oil pressure, throttle lock, check engine, transmission filter bypass and check, centershift pin, brake air pressure, parking brake engaged, auto shift)

 Key start/stop switch

 Meter, hour

 Power steering, hydraulic

 Seat, vinyl-covered static

 Seat belt

 Steering wheel, tilt, adjustable

 Storage area, cooler/lunch box

 Throttle, electronic control

 Air cleaner, dry type radial seal with service indicator and automatic dust ejector

 Air to air after cooler (ATAAC)

 Blower fan

 Brakes, oil disc, four-wheel air actuated

 Differential with lock/unlock

 Eco mode

 Engine idle shutdown

 Engine, Cat C7 with ACERT Technology, diesel with automatic engine derate and idle control<br>– 140K meets U.S. EPA Tier 3/EU Stage IIIA or Tier 2/Stage II equivalent emission standards and Brazil MAR-1 Nonroad emission standards, depending on

 Fuel water separator

 Muffler, under hood

 Next gen filter design

 Parking brake, multi-disc, sealed and oil cooled

 Prescreener

 Priming pump, fuel, resiliently mounted

 Sediment drain, fuel tank

 Tandem drive

 Transmission, 8 speed forward and 6 speed reverse, power shift, direct drive with electronic shift control and overspeed protection

 VHP (Variable Horse Power)

 Blade Float

 Bumper, rear

 CD ROM Parts Book

 Circle drive slip clutch

 Cutting edges, 152 mm × 16 mm (6 in × 5⁄8 in) curved DH-2 steel

 Doors, engine compartment

 Drawbar, 6 shoe replaceable nylon composite wear strips

 Endbits, 16 mm (5/8 in) DH-2 steel

 Frame, articulated with safety lock

 Fuel tank, 305 L (80.6 gal)

 Ground level engine shutdown

 Link bar, 7 position

 Moldboard, 3658 mm × 610 mm × 22 mm (12 ft × 24 in × 7⁄8 in) blade with hydraulic sideshift and mechanical tip

 S·O·S ports, engine, hydraulic, transmission and cooling

 Toolbox with padlock

 Vandalism protection – including cap locks for hydraulic tank, radiator access cover, fuel tank, engine and transmission oil check/fill and lockable battery boxes.

 Extended Life Coolant to –35° C (–30° F)

Seat belt

 Alternator, 115 Ampere

 Backup alarm, reversing lights

 Batteries, maintenance free 750 CCA

 Common fuse block

 Electrical system, 24 volt

 Horn, electric

 Indication display

 Lights, stop and tail

 Motor, starting

 Product Link Ready

 Working lights

 Accelerator

 Control console, adjustable

 Gauge cluster (includes voltmeter, articulation, engine coolant temperature, air brake pressure and fuel level)

 Guard rails, operator station

 Hydraulic controls, load sensing (right/left blade lift, circle drive, centershift, sideshift, front wheel lean and articulation)

 Indicator lights (includes high beam, LH and RH turn, low engine oil pressure, throttle lock, check engine, transmission filter bypass and check, centershift pin, brake air pressure, parking brake engaged, auto shift)

 Key start/stop switch

 Meter, hour

 Power steering, hydraulic

 Seat, vinyl-covered static

 Seat belt

 Steering wheel, tilt, adjustable

 Storage area, cooler/lunch box

 Throttle, electronic control

 Air cleaner, dry type radial seal with service indicator and automatic dust ejector

 Air to air after cooler (ATAAC)

 Blower fan

 Brakes, oil disc, four-wheel air actuated

 Differential with lock/unlock

 Eco mode

 Engine idle shutdown

 Engine, Cat C7 with ACERT Technology, diesel with automatic engine derate and idle control<br>– 140K meets U.S. EPA Tier 3/EU Stage IIIA or Tier 2/Stage II equivalent emission standards and Brazil MAR-1 Nonroad emission standards, depending on

 Fuel water separator

 Muffler, under hood

 Next gen filter design

 Parking brake, multi-disc, sealed and oil cooled

 Prescreener

 Priming pump, fuel, resiliently mounted

 Sediment drain, fuel tank

 Tandem drive

 Transmission, 8 speed forward and 6 speed reverse, power shift, direct drive with electronic shift control and overspeed protection

 VHP (Variable Horse Power)

 Blade Float

 Bumper, rear

 CD ROM Parts Book

 Circle drive slip clutch

 Cutting edges, 152 mm × 16 mm (6 in × 5⁄8 in) curved DH-2 steel

 Doors, engine compartment

 Drawbar, 6 shoe replaceable nylon composite wear strips

 Endbits, 16 mm (5/8 in) DH-2 steel

 Frame, articulated with safety lock

 Fuel tank, 305 L (80.6 gal)

 Ground level engine shutdown

 Link bar, 7 position

 Moldboard, 3658 mm × 610 mm × 22 mm (12 ft × 24 in × 7⁄8 in) blade with hydraulic sideshift and mechanical tip

 S·O·S ports, engine, hydraulic, transmission and cooling

 Toolbox with padlock

 Vandalism protection – including cap locks for hydraulic tank, radiator access cover, fuel tank, engine and transmission oil check/fill and lockable battery boxes.

 Extended Life Coolant to –35° C (–30° F)

Steering wheel, tilt, adjustable

 Alternator, 115 Ampere

 Backup alarm, reversing lights

 Batteries, maintenance free 750 CCA

 Common fuse block

 Electrical system, 24 volt

 Horn, electric

 Indication display

 Lights, stop and tail

 Motor, starting

 Product Link Ready

 Working lights

 Accelerator

 Control console, adjustable

 Gauge cluster (includes voltmeter, articulation, engine coolant temperature, air brake pressure and fuel level)

 Guard rails, operator station

 Hydraulic controls, load sensing (right/left blade lift, circle drive, centershift, sideshift, front wheel lean and articulation)

 Indicator lights (includes high beam, LH and RH turn, low engine oil pressure, throttle lock, check engine, transmission filter bypass and check, centershift pin, brake air pressure, parking brake engaged, auto shift)

 Key start/stop switch

 Meter, hour

 Power steering, hydraulic

 Seat, vinyl-covered static

 Seat belt

 Steering wheel, tilt, adjustable

 Storage area, cooler/lunch box

 Throttle, electronic control

 Air cleaner, dry type radial seal with service indicator and automatic dust ejector

 Air to air after cooler (ATAAC)

 Blower fan

 Brakes, oil disc, four-wheel air actuated

 Differential with lock/unlock

 Eco mode

 Engine idle shutdown

 Engine, Cat C7 with ACERT Technology, diesel with automatic engine derate and idle control<br>– 140K meets U.S. EPA Tier 3/EU Stage IIIA or Tier 2/Stage II equivalent emission standards and Brazil MAR-1 Nonroad emission standards, depending on

 Fuel water separator

 Muffler, under hood

 Next gen filter design

 Parking brake, multi-disc, sealed and oil cooled

 Prescreener

 Priming pump, fuel, resiliently mounted

 Sediment drain, fuel tank

 Tandem drive

 Transmission, 8 speed forward and 6 speed reverse, power shift, direct drive with electronic shift control and overspeed protection

 VHP (Variable Horse Power)

 Blade Float

 Bumper, rear

 CD ROM Parts Book

 Circle drive slip clutch

 Cutting edges, 152 mm × 16 mm (6 in × 5⁄8 in) curved DH-2 steel

 Doors, engine compartment

 Drawbar, 6 shoe replaceable nylon composite wear strips

 Endbits, 16 mm (5/8 in) DH-2 steel

 Frame, articulated with safety lock

 Fuel tank, 305 L (80.6 gal)

 Ground level engine shutdown

 Link bar, 7 position

 Moldboard, 3658 mm × 610 mm × 22 mm (12 ft × 24 in × 7⁄8 in) blade with hydraulic sideshift and mechanical tip

 S·O·S ports, engine, hydraulic, transmission and cooling

 Toolbox with padlock

 Vandalism protection – including cap locks for hydraulic tank, radiator access cover, fuel tank, engine and transmission oil check/fill and lockable battery boxes.

 Extended Life Coolant to –35° C (–30° F)

Storage area, cooler/lunch box

 Alternator, 115 Ampere

 Backup alarm, reversing lights

 Batteries, maintenance free 750 CCA

 Common fuse block

 Electrical system, 24 volt

 Horn, electric

 Indication display

 Lights, stop and tail

 Motor, starting

 Product Link Ready

 Working lights

 Accelerator

 Control console, adjustable

 Gauge cluster (includes voltmeter, articulation, engine coolant temperature, air brake pressure and fuel level)

 Guard rails, operator station

 Hydraulic controls, load sensing (right/left blade lift, circle drive, centershift, sideshift, front wheel lean and articulation)

 Indicator lights (includes high beam, LH and RH turn, low engine oil pressure, throttle lock, check engine, transmission filter bypass and check, centershift pin, brake air pressure, parking brake engaged, auto shift)

 Key start/stop switch

 Meter, hour

 Power steering, hydraulic

 Seat, vinyl-covered static

 Seat belt

 Steering wheel, tilt, adjustable

 Storage area, cooler/lunch box

 Throttle, electronic control

 Air cleaner, dry type radial seal with service indicator and automatic dust ejector

 Air to air after cooler (ATAAC)

 Blower fan

 Brakes, oil disc, four-wheel air actuated

 Differential with lock/unlock

 Eco mode

 Engine idle shutdown

 Engine, Cat C7 with ACERT Technology, diesel with automatic engine derate and idle control<br>– 140K meets U.S. EPA Tier 3/EU Stage IIIA or Tier 2/Stage II equivalent emission standards and Brazil MAR-1 Nonroad emission standards, depending on

 Fuel water separator

 Muffler, under hood

 Next gen filter design

 Parking brake, multi-disc, sealed and oil cooled

 Prescreener

 Priming pump, fuel, resiliently mounted

 Sediment drain, fuel tank

 Tandem drive

 Transmission, 8 speed forward and 6 speed reverse, power shift, direct drive with electronic shift control and overspeed protection

 VHP (Variable Horse Power)

 Blade Float

 Bumper, rear

 CD ROM Parts Book

 Circle drive slip clutch

 Cutting edges, 152 mm × 16 mm (6 in × 5⁄8 in) curved DH-2 steel

 Doors, engine compartment

 Drawbar, 6 shoe replaceable nylon composite wear strips

 Endbits, 16 mm (5/8 in) DH-2 steel

 Frame, articulated with safety lock

 Fuel tank, 305 L (80.6 gal)

 Ground level engine shutdown

 Link bar, 7 position

 Moldboard, 3658 mm × 610 mm × 22 mm (12 ft × 24 in × 7⁄8 in) blade with hydraulic sideshift and mechanical tip

 S·O·S ports, engine, hydraulic, transmission and cooling

 Toolbox with padlock

 Vandalism protection – including cap locks for hydraulic tank, radiator access cover, fuel tank, engine and transmission oil check/fill and lockable battery boxes.

 Extended Life Coolant to –35° C (–30° F)

Throttle, electronic control

 Alternator, 115 Ampere

 Backup alarm, reversing lights

 Batteries, maintenance free 750 CCA

 Common fuse block

 Electrical system, 24 volt

 Horn, electric

 Indication display

 Lights, stop and tail

 Motor, starting

 Product Link Ready

 Working lights

 Accelerator

 Control console, adjustable

 Gauge cluster (includes voltmeter, articulation, engine coolant temperature, air brake pressure and fuel level)

 Guard rails, operator station

 Hydraulic controls, load sensing (right/left blade lift, circle drive, centershift, sideshift, front wheel lean and articulation)

 Indicator lights (includes high beam, LH and RH turn, low engine oil pressure, throttle lock, check engine, transmission filter bypass and check, centershift pin, brake air pressure, parking brake engaged, auto shift)

 Key start/stop switch

 Meter, hour

 Power steering, hydraulic

 Seat, vinyl-covered static

 Seat belt

 Steering wheel, tilt, adjustable

 Storage area, cooler/lunch box

 Throttle, electronic control

 Air cleaner, dry type radial seal with service indicator and automatic dust ejector

 Air to air after cooler (ATAAC)

 Blower fan

 Brakes, oil disc, four-wheel air actuated

 Differential with lock/unlock

 Eco mode

 Engine idle shutdown

 Engine, Cat C7 with ACERT Technology, diesel with automatic engine derate and idle control<br>– 140K meets U.S. EPA Tier 3/EU Stage IIIA or Tier 2/Stage II equivalent emission standards and Brazil MAR-1 Nonroad emission standards, depending on

 Fuel water separator

 Muffler, under hood

 Next gen filter design

 Parking brake, multi-disc, sealed and oil cooled

 Prescreener

 Priming pump, fuel, resiliently mounted

 Sediment drain, fuel tank

 Tandem drive

 Transmission, 8 speed forward and 6 speed reverse, power shift, direct drive with electronic shift control and overspeed protection

 VHP (Variable Horse Power)

 Blade Float

 Bumper, rear

 CD ROM Parts Book

 Circle drive slip clutch

 Cutting edges, 152 mm × 16 mm (6 in × 5⁄8 in) curved DH-2 steel

 Doors, engine compartment

 Drawbar, 6 shoe replaceable nylon composite wear strips

 Endbits, 16 mm (5/8 in) DH-2 steel

 Frame, articulated with safety lock

 Fuel tank, 305 L (80.6 gal)

 Ground level engine shutdown

 Link bar, 7 position

 Moldboard, 3658 mm × 610 mm × 22 mm (12 ft × 24 in × 7⁄8 in) blade with hydraulic sideshift and mechanical tip

 S·O·S ports, engine, hydraulic, transmission and cooling

 Toolbox with padlock

 Vandalism protection – including cap locks for hydraulic tank, radiator access cover, fuel tank, engine and transmission oil check/fill and lockable battery boxes.

 Extended Life Coolant to –35° C (–30° F)

POWER TRAIN

 Air cleaner, dry type radial seal with service indicator and automatic dust ejector

 Air to air after cooler (ATAAC)

 Blower fan

 Brakes, oil disc, four-wheel air actuated

 Differential with lock/unlock

 Engine, Cat C7 with ACERT Technology, diesel with automatic engine derate and idle control. Meets non-current U.S. EPA Tier 2 and EU Stage II emission standards.

 Fuel water separator

 Muffler, under hood

 Parking brake, multi-disc, sealed and oil cooled

 Prescreener

 Priming pump, fuel, resiliently mounted

 Sediment drain, fuel tank

 Tandem drive

 Transmission, 8 speed forward and 6 speed reverse, power shift, direct drive with electronic shift control and overspeed protection

 VHP (Variable Horse Power)

OTHER STANDARD EQUIPMENT

 Bumper, rear

 CD ROM Parts Book

 Circle drive slip clutch

 Cutting edges, 152 mm × 16 mm (6 in × 5/8 in) curved DH-2 steel

 Doors, Engine compartment

 Drawbar, 6 shoe replaceable nylon composite wear strips

 Endbits, 16 mm (5/8 in) DH-2 steel

 Frame, articulated with safety lock

 Fuel tank, 305 L (80.6 gal)

 Ground level engine shutdown

 Link bar, 7 position

 Moldboard, 3658 mm × 610 mm × 22 mm (12 ft × 24 in × 7/8 in) blade with hydraulic sideshift and mechanical tip

 S·O·S ports, engine, hydraulic, transmission and cooling

 Toolbox with padlock

 Vandalism protection - including cap locks for hydraulic tank, radiator access cover, fuel tank, engine and transmission oil check/fill and lockable battery boxes.

ANTIFREEZE

 Extended Life Coolant to -35° C (-30° F)

Extended Life Coolant to -35° C (-30° F)

 Alternator, 115 Ampere

 Backup alarm, reversing lights

 Batteries, maintenance free 750 CCA

 Common fuse block

 Electrical system, 24 volt

 Horn, electric

 Indication display

 Lights, stop and tail

 Motor, starting

 Product Link Ready

 Working lights

 Accelerator

 Control console, adjustable

 Gauge cluster (includes voltmeter, articulation, engine coolant temperature, air brake pressure and fuel level)

 Guard rails, operator station

 Hydraulic controls, load sensing (right/left blade lift, circle drive, centershift, sideshift, front wheel lean and articulation)

 Indicator lights (includes high beam, LH and RH turn, low engine oil pressure, throttle lock, check engine, transmission filter bypass and check, centershift pin, brake air pressure, parking brake engaged, auto shift)

 Key start/stop switch

 Meter, hour

 Power steering, hydraulic

 Seat, vinyl-covered static

 Seat belt

 Steering wheel, tilt, adjustable

 Storage area, cooler/lunch box

 Throttle, electronic control

 Air cleaner, dry type radial seal with service indicator and automatic dust ejector

 Air to air after cooler (ATAAC)

 Blower fan

 Brakes, oil disc, four-wheel air actuated

 Differential with lock/unlock

 Eco mode

 Engine idle shutdown

 Engine, Cat C7 with ACERT Technology, diesel with automatic engine derate and idle control<br>– 140K meets U.S. EPA Tier 3/EU Stage IIIA or Tier 2/Stage II equivalent emission standards and Brazil MAR-1 Nonroad emission standards, depending on

 Fuel water separator

 Muffler, under hood

 Next gen filter design

 Parking brake, multi-disc, sealed and oil cooled

 Prescreener

 Priming pump, fuel, resiliently mounted

 Sediment drain, fuel tank

 Tandem drive

 Transmission, 8 speed forward and 6 speed reverse, power shift, direct drive with electronic shift control and overspeed protection

 VHP (Variable Horse Power)

 Blade Float

 Bumper, rear

 CD ROM Parts Book

 Circle drive slip clutch

 Cutting edges, 152 mm × 16 mm (6 in × 5⁄8 in) curved DH-2 steel

 Doors, engine compartment

 Drawbar, 6 shoe replaceable nylon composite wear strips

 Endbits, 16 mm (5/8 in) DH-2 steel

 Frame, articulated with safety lock

 Fuel tank, 305 L (80.6 gal)

 Ground level engine shutdown

 Link bar, 7 position

 Moldboard, 3658 mm × 610 mm × 22 mm (12 ft × 24 in × 7⁄8 in) blade with hydraulic sideshift and mechanical tip

 S·O·S ports, engine, hydraulic, transmission and cooling

 Toolbox with padlock

 Vandalism protection – including cap locks for hydraulic tank, radiator access cover, fuel tank, engine and transmission oil check/fill and lockable battery boxes.

 Extended Life Coolant to –35° C (–30° F)

ELECTRICAL

Alternator, 115 Ampere

Backup alarm, reversing lights

Batteries, maintenance free 750 CCA

Common fuse block

Electrical system, 24 volt

Horn, electric

Indication display

Lights, stop and tail

Motor, starting

Product Link Ready

Working lights

OPERATOR ENVIRONMENT

Accelerator

Control console, adjustable

Gauge cluster (includes voltmeter, articulation, engine coolant temperature, air brake pressure and fuel level)

Guard rails, operator station

Hydraulic controls, load sensing (right/left blade lift, circle drive, centershift, sideshift, front wheel lean and articulation)

Indicator lights (includes high beam, LH and RH turn, low engine oil pressure, throttle lock, check engine, transmission filter bypass and check, centershift pin, brake air pressure, parking brake engaged, auto shift)

Key start/stop switch

Meter, hour

Power steering, hydraulic

Seat, vinyl-covered static

Seat belt

Steering wheel, tilt, adjustable

Storage area, cooler/lunch box

Throttle, electronic control

POWER TRAIN

Air cleaner, dry type radial seal with service indicator and automatic dust ejector

Air to air after cooler (ATAAC)

Blower fan

Brakes, oil disc, four-wheel air actuated

Differential with lock/unlock

Eco mode

Engine idle shutdown

Engine, Cat C7 with ACERT Technology, diesel with automatic engine derate and idle control– 140K meets U.S. EPA Tier 3/EU Stage IIIA or Tier 2/Stage II equivalent emission standards and Brazil MAR-1 Nonroad emission standards, depending on

Fuel water separator

Muffler, under hood

Next gen filter design

Parking brake, multi-disc, sealed and oil cooled

Prescreener

Priming pump, fuel, resiliently mounted

Sediment drain, fuel tank

Tandem drive

Transmission, 8 speed forward and 6 speed reverse, power shift, direct drive with electronic shift control and overspeed protection

VHP (Variable Horse Power)

OTHER STANDARD EQUIPMENT

Blade Float

Bumper, rear

CD ROM Parts Book

Circle drive slip clutch

Cutting edges, 152 mm × 16 mm (6 in × 5⁄8 in) curved DH-2 steel

Doors, engine compartment

Drawbar, 6 shoe replaceable nylon composite wear strips

Endbits, 16 mm (5/8 in) DH-2 steel

Frame, articulated with safety lock

Fuel tank, 305 L (80.6 gal)

Ground level engine shutdown

Link bar, 7 position

Moldboard, 3658 mm × 610 mm × 22 mm (12 ft × 24 in × 7⁄8 in) blade with hydraulic sideshift and mechanical tip

S·O·S ports, engine, hydraulic, transmission and cooling

Toolbox with padlock

Vandalism protection – including cap locks for hydraulic tank, radiator access cover, fuel tank, engine and transmission oil check/fill and lockable battery boxes.

ANTIFREEZE

Extended Life Coolant to –35° C (–30° F)

GUARDS

 Guard, transmission

Guard, transmission

OPERATOR ENVIRONMENT

 Air conditioner with heater

 Heater, cab

Air conditioner with heater

Heater, cab

CAB/CANOPY

 Cab, ROPS*

 Cab, Non-ROPS*

 Canopy, ROPS*

 Seat, vinyl adjustable

 Seat, cloth, contour

 Fan, defroster, front window

 Fan, defroster, rear window

 Sun shade, rear

 Wiper/washer, rear

 Wipers, intermittent front

 Mirrors, dual inside

 Mirrors, outside mounted

 Power port, 12V accessory

 Radio ready entertainment

 Tachometer/Speedometer

 * Weights represent changes to Typically Equipped machine weights.

RIPPER/SCARIFIER

 Ripper/Scarifier, rear mounted*

 Scarifier, mid mounted, V-type

LIGHTS

 Bar mounted, low, directional and headlights

 Cab and bar mounted, high, directional, headlights and work lights

POWER TRAIN

 Autoshift

OTHER ATTACHMENTS

 Product Link

 Snow Wing Mounting, frame-ready

 AccuGrade ARO

 Dryer, air

 Push plate, counterweight*

 Accumulator, blade lift

 Battery, extreme duty (1400 CCA)

 Ether, starting aid

 Heater, engine coolant, 220V

Product Link

Snow Wing Mounting, frame-ready

AccuGrade ARO

Dryer, air

Push plate, counterweight*

Accumulator, blade lift

Battery, extreme duty (1400 CCA)

Ether, starting aid

Heater, engine coolant, 220V

HYDRAULICS

 Pump, hydraulic, high capacity (210 L/min 55.7 gal/min)

 Hydraulic arrangements with one or more additional hydraulic valves are available for rear ripper, mid-mount scarifier, dozer, snow plow and snow wing.

Pump, hydraulic, high capacity (210 L/min 55.7 gal/min)

Hydraulic arrangements with one or more additional hydraulic valves are available for rear ripper, mid-mount scarifier, dozer, snow plow and snow wing.

BLADES, MOLDBOARDS

 Moldboard: Blade, 4267 mm × 610 mm × 22 mm (14' × 24" × 7/8")

 Blade, front

 Cutting edge, 203 mm × 19 mm (8" × 3/4"). For use with 14' blade

 Endbits, overlay, reversible pair for use with 203 mm (8") cutting edges

Moldboard: Blade, 4267 mm × 610 mm × 22 mm (14' × 24" × 7/8")

Blade, front

Cutting edge, 203 mm × 19 mm (8" × 3/4"). For use with 14' blade

Endbits, overlay, reversible pair for use with 203 mm (8") cutting edges

GUARDS

Guard, transmission

OPERATOR ENVIRONMENT

Air conditioner with heater

Heater, cab

CAB/CANOPY

Cab, ROPS

Cab, Non-ROPS

Canopy, ROPS

Seat, vinyl adjustable

Seat, cloth, contour

Fan, defroster, front window

Fan, defroster, rear window

Sun shade, rear

Wiper/washer, rear

Wipers, intermittent front

Mirrors, dual inside

Mirror, heated

Mirrors, outside mounted

Power port, 12V accessory

Radio, Bluetooth®

Radio ready entertainment

Rear vision camera

Tachometer/speedometer

RIPPER/SCARIFIER

Ripper/scarifier, rear mounted

Scarifier, mid mounted, V-Type

LIGHTS

Bar mounted, low, directional and headlights

Beacon light

Combination headlight

Cab and bar mounted, high, directional, headlights and work lights

Rear facing cab lights

POWER TRAIN

Autoshift

OTHER ATTACHMENTS

Cross Slope Indicate

Product Link

Product Link Elite

Snow Wing Mounting, frame-ready

AccuGrade ARO

Dryer, air

Push plate, counterweight

Accumulator, blade lift

Battery, extreme duty (1,400 CCA)

Ether, starting aid

Heater, engine coolant, 220V

Circle Saver

Ripper tow package

HYDRAULICS

Pump, hydraulic, high capacity (210 L/min, 55.7 gal/min)

Hydraulic arrangements with one or more additional hydraulic valves are available for rear ripper, mid-mount scarifier, dozer, snow plow and snow wing

BLADES, MOLDBOARDS

Moldboard, top adjust drawbar, circle

Blade, front

End bits, overlay, reversible pair for use with 203 mm (8") cutting edges