Engine

Base Power (1st gear) – Net	108.0 kW
Engine Model	Cat® C7 ACERT™
VHP – gears 1-2 Net	108.0 kW
VHP – gear 3 Net	116.0 kW
VHP – gears 4-8 Net	123.0 kW
VHP – gears 1-2 Gross	118.0 kW
VHP – gear 3 Gross	125.0 kW
VHP – gears 4-8 Gross	133.0 kW
Displacement	7.2 L
Bore	105.0 mm
Stroke	127.0 mm
Speed @ rated power	2000.0 RPM
Number of cylinders	6
Derating altitude	3048.0 m
Hi Ambient Fan speed - max	1450.0 RPM
High Ambient Capability	50.0 ° C
VHP Range – Net	108-123 kW (145-165 hp)
Base Power (all gears) Net	108.0 kW
Torque Rise	50.0 %
Max Torque	901.0 N·m

Weights

Gross Vehicle Weight – Typically Equipped	14334.0 kg
Gross Vehicle Weight: Base – total	13704.0 kg
Gross Vehicle Weight: Typically Equipped – front axle	4300.0 kg
Gross Vehicle Weight: Typically Equipped – rear axle	10034.0 kg
Gross Vehicle Weight: Typically Equipped – total	14334.0 kg
Gross Vehicle Weight: Base – front axle	4111.0 kg
Gross Vehicle Weight: Base – rear axle	9563.0 kg
Gross Vehicle Wt, Max	20766.0 kg
Gross Vehicle Weight: Maximum – front axle	7268.0 kg
Gross Vehicle Weight: Maximum – rear axle	13498.0 kg

Moldboard

Blade Width	3.7 m
Moldboard – height	610.0 mm
Moldboard – thickness	22.0 mm
Arc Radius	413.0 mm
Throat Clearance	120.0 mm
Cutting Edge – width	152.0 mm
Cutting Edge – thickness	16.0 mm
End Bit – width	152.0 mm
End Bit – thickness	16.0 mm
Blade Pull - Typical GVW	9030.0 kg
Blade Pull – maximum GVW	12148.0 kg
Down Pressure - Typical GVW	7503.0 kg
Down Pressure – maximum GVW	12681.0 kg

Power Train

Forward/Reverse Gears	8 fwd / 6 rev
Transmission	Direct Drive, powershift
Brakes – Service	Air actuated, multiple oil-disc
Brakes – Service, surface area	23948.0 cm2
Brakes – Parking	Air actuated, multiple oil-disc
Brakes – Secondary	Dual circuit

Operating Specifications

Top Speed – forward	44.8 km/h
Top Speed – reverse	35.4 km/h
Turning Radius, outside front tires	7.5 m
Steering Range – left/right	47.5 Degrees
Articulation Angle – left/right	20.0 Degrees
Forward – 1st	3.8 km/h
Forward – 2nd	5.2 km/h
Forward – 3rd	7.6 km/h
Forward – 4th	10.4 km/h
Forward – 5th	16.5 km/h
Forward – 6th	22.4 km/h
Forward – 7th	30.8 km/h
Forward – 8th	44.8 km/h
Reverse – 1st	3.0 km/h
Reverse – 2nd	5.7 km/h
Reverse – 3rd	8.2 km/h
Reverse – 4th	13.0 km/h
Reverse – 5th	24.3 km/h
Reverse – 6th	35.4 km/h

Hydraulic System

Circuit Type	Load Sensing, Closed Center, PPPC
Pump Type	Variable piston
Pump Output	210.5 L/min
Maximum System Pressure	25500.0 kPa
Standby Pressure	3600.0 kPa
Reservoir Tank Capacity	55.0 L

Blade Range

Circle Centershift – right	728.0 mm
Circle Centershift – left	752.0 mm
Moldboard Sideshift – right	663.0 mm
Moldboard Sideshift – left	512.0 mm
Maximum Blade Position Angle	90.0 Degrees
Blade Tip Range – forward	40.0 Degrees
Blade Tip Range – backward	5.0 Degrees
Maximum shoulder reach outside of tires – right	1809.0 mm
Maximum shoulder reach outside of tires – left	1859.0 mm
Maximum lift above ground	480.0 mm
Maximum depth of cut	735.0 mm

Ripper

Ripper shank holders, quantity	5
Ripper shank holder spacing	533.0 mm
Penetration force	8047.0 kg
Pryout force	9281.0 kg
Machine length increase, beam raised	970.0 mm

Scarifier

Mid, V-Type: Working width	1184.0 mm
Mid, V-Type: Scarifying depth, maximum	292.0 mm
Mid, V-Type: Scarifier shank holders quantity	11
Mid, V-Type: Scarifier shank holder spacing	116.0 mm
Rear: Working width	2300.0 mm
Rear: Scarifying depth, maximum	411.0 mm
Rear: Scarifier shank holders quantity	9
Rear: Scarifier shank holder spacing	267.0 mm

Frame

Circle – diameter	1530.0 mm
Circle – blade beam thickness	30.0 mm
Drawbar – height	127.0 mm
Drawbar – width	76.0 mm
Front axle – height to center	615.0 mm
Front axle – wheel lean, left/right	18.0 Degrees
Front axle – total oscillation per side	32.0 Degrees
Front-top/bottom plate – width	305.0 mm
Front-top/bottom plate – thickness	25.0 mm
Front-side plates – width	242.0 mm
Front-side plates – thickness	12.0 mm
Front-linear weights – minimum	165.0 kg/m
Front-linear weights – maximum	213.0 kg/m
Front-section modulus - min	2083.0 cm2
Front-section modulus - max	4785.0 cm2

Tandems

Height	506.0 mm
Width	201.0 mm
Sidewall thickness – inner	16.0 mm
Sidewall thickness – outer	18.0 mm
Drive chain pitch	51.0 mm
Wheel axle spacing	1522.0 mm
Tandem oscillation – front up	15.0 Degrees
Tandem oscillation – front down	25.0 Degrees

Service Refill

Fuel Capacity	305.0 L
Cooling system	40.0 L
Engine Oil	25.0 L
Transmission/Differential/Final Drives	47.0 L
Tandem housing (each)	64.0 L
Front wheel spindle bearing housing	0.5 L
Circle drive housing	7.0 L

Dimensions

Height – ROPS Cab	3323.9 mm
Height – Non-ROPS Cab	3318.4 mm
Height - low profile ROPS cab	3097.0 mm
Height - high profile Non-ROPS canopy	3320.4 mm
Height – ROPS Canopy	3323.9 mm
Height - high profile NON ROPS semi-cab	3320.9 mm
Ground Clearance – Center Front Axle	584.0 mm
Length – Between Tandem Axles	1522.8 mm
Length – Front Axle to Moldboard	2587.7 mm
Length – Front Axle to Mid Tandem	6086.4 mm
Length – Front Tire to Rear of Machine	8503.5 mm
Length – Counterweight to Ripper	10012.5 mm
Ground Clearance, Trans. Case	306.8 mm
Height – Top of Cylinders	3013.6 mm
Height to Exhaust Stack	2822.7 mm
Width – Tire Center Lines	2034.5 mm
Width – Outside Rear Tires	2452.3 mm
Width – Outside Front Tires	2480.5 mm

Standards

ROPS/FOPS	ISO 3471:1994/ISO 3499:1992
Steering	ISO 5010:1992
Brakes	ISO 3450:1996
Sound	ISO 6394:1998/ISO 6393:1998

Power Train

Smooth, responsive performance and reliability.

Power Shift Transmission

Provides on-the-go, full-power shifting and inching capability. Direct drive delivers superior fuel efficiency and better "feel" of blade loads, material hardness and ground speed.

Optional Autoshift - Automatic Gear Shifts

This feature automatically shifts the transmission at optimal points (in gears 3-8) so the operator can focus on the work, improving safety, productivity and ease of operation.

Oil Disk Brakes - Completely Sealed, Adjustment Free

Oil-bathed, air actuated and spring-released, located at each tandem wheel to eliminate power train braking loads and to reduce servicing time. The large brake surface area provides dependable braking capability and extended life before rebuild.

Front Axle with Cat Live Spindle Design

Caterpillar® sealed spindle keeps the bearings free from contaminants and lubricated in a lightweight oil to reduce owning and operating costs. Two tapered roller bearings support the wheel spindle. The larger tapered roller bearing is outboard where the load is greater, extending bearing life.

Cat C7 Engine

Maximum power and efficiency.

Power Management

The Cat C7 engine uses ACERT® Technology to provide electronic control, precision fuel delivery and refined air management, resulting in outstanding performance and lower emissions. Variable Horse Power (VHP) is standard: base power in gears 1 and 2, 7.5 kW (10 hp) increase in gear 3, and an additional 7.5 kW (10 hp) increase in gears 4 through 8. Customized torque curves increase peak torque for improved lugging performance and responsiveness. The Electronic Throttle Control (ETC) provides easier, more precise and consistent throttle operation.

Hydraulics

Balanced hydraulics deliver consistent, precise and responsive control.

Balanced Flow, Independent Oil Supply

Hydraulic flow is proportioned to ensure all implements operate simultaneously. Independent oil supply prevents cross-contamination and provides proper oil cooling, which means less heat build-up and extended component life.

Implement Control Valves

Provide outstanding operator "feel" and predictable system response for unmatched implement control. To help maintain exact blade settings, lock valves are built into all control valves. Line relief valves are also incorporated into selected control valves to protect the cylinders from over-pressurization.

Load-Sensing Hydraulics (PPPC)

A load sensing variable displacement pump and the advanced Proportional Priority Pressure-Compensating (PPPC, or "triple-PC") hydraulic valves provide superior implement control and better machine performance. PPPC valves have different flow rates for the head and rod ends of the cylinder. Continuously matching hydraulic flow and pressure to power demands creates less heat and reduces power consumption.

Consistent and Predictable Movement

The hydraulic system uses valves that provide PPPC control for precise implement and machine operation. These valves contain spools that are specifically cut for each hydraulic function on the motor grader. They compensate for differences in flow requirements, based on cylinder size and the difference in surface volume between the rod end (blue) and barrel end (red) of the cylinder. The result is predictable, consistent hydraulic speeds whether extending or retracting the cylinder.

Structures, DCM

Every component is designed for high strength and optimum durability.

Frame Structure - Provides Consistency and Strength

Front frame is a continuous top and bottom plate construction. Flanged box section design removes welds from high stress areas, improving reliability and durability. The rear frame structure has two box section channels with fully welded differential case for a solid working platform. An integrated bumper ties the rear frame together into a cohesive unit, to handle high stress loads.

Drawbar, Circle and Moldboard (DCM)

The Y-frame drawbar is constructed of two solid beams for strength, durability, and precise blading control. This design allows the addition of a mid-mount scarifier without compromising blade positioning in extreme reach positions. A one-piece forged circle with hydraulically driven motor handles high stress loads. Raised wear surfaces prevent circle teeth wear against the drawbar. One-piece forged circle stands up to high stress loads. Raised wear surfaces prevent circle teeth wear against the drawbar. The 64 uniformly spaced circle teeth are flame cut and heat induction hardened to resist wear, and the circle is secured to the drawbar by six support shoes for maximum support. The moldboard provides optimal curvature and large throat clearance that helps move all soil types quickly and efficiently. These features deliver excellent load distribution and minimal material buildup in the circle area while allowing large blade loads to roll freely.

Blade Lift Accumulators

This optional feature uses accumulators to help absorb impact loads to the moldboard by allowing vertical blade travel. Blade lift accumulators reduce unnecessary wear and help to avoid unintended machine movement for increased operator safety.

Work Tools and Attachments

Allows expansion of machine versatility, utilization, and performance.

Moldboard Options

Standard moldboard length is 3.7 m (12 ft), with an optional 4.3 m (14 ft) moldboard available from the factory. Left and right side moldboard extensions (available through the Cat parts system) will increase moldboard surface area and extend reach capability.

Ground Engaging Tools (GET)

A wide variety of Cat GET is available from Cat® parts system, including cutting edges, and end bits, all designed for maximum service life and productivity.

Rear Ripper / Scarifier

The 12K optional ripper/scarifier is made to penetrate tough material fast and rip thoroughly for easier material movement with the moldboard. The ripper includes three shanks with the ability to add two more if needed. Nine scarifier shanks can also be added for additional versatility.

Front Mounted Groups

A front mounted push plate/counterweight or front blade can be ordered.

Mid-Mount Scarifier

Positioned between the front axle and the circle to break up tough material that the blade can then move, all in a single pass. The V-type scarifier can accommodate up to 11 teeth.

Snow Removal Work Tools

Includes snow wings, angle blades, and V-plows. Multiple mounting options are available, increasing machine versatility. (Availability may differ by region.)

Operator's Station

Caterpillar sets the standard for comfort, convenience and visibility.

Designed to keep operators comfortable, relaxed and productive throughout the long work shift.

The 12K features:

• Electronic Clutch Pressure Control (ECPC) optimizes inching modulation and smoothes shiftin
• Low efforts on all pedals, hydraulic controls and the transmission shifte
• Rocker switches and transmission shifter are backlit for night time operatio
• The operator can adjust implement controls and steering wheel angle independentl
• Clear view to the moldboard heel and tandem tire
• Fresh air filters above each cab door for quick replacement

In-dash Instrument Cluster

The instrument panel, with easy-to read, high-visibility gauges and warning lamps, keeps the operator aware of critical system information. The dash cluster panel provides enhanced machine information and diagnostic capability. It includes an engine coolant temperature gauge, an articulation gauge, voltage gauge, and fuel level gauge. Service brake air pressure gauges are also standard. Speedometer and tachometer are optional. All major systems are monitored by warning lights.

Additional Cab Features

Additional cab features include storage area, an adjustable control console, and a coat hook. The following optional features are also available: power port, air conditioner/heater, suspension seat, defroster fan, sun shade, backup lights, Product Link, and AccuGrade system ready. NOTE: Some attachments are not available in all regions

Electronic Solutions

Optimizes machine performance and availability.

AccuGrade Grade Control System

The Cat AccuGrade™ System automatically controls the blade, improving operator efficiency and productivity. AccuGrade technology reduces the need for traditional survey stakes or grade checkers, so you can reach grade faster and in fewer passes than ever before. The Cat AccuGrade System includes Cross Slope, Sonic, Laser, GPS or ATS electronic kits that are available in the AccuGrade price list. The factory installed AccuGrade Attachment Ready Option provides additional mounting brackets, cab controls and electrical harnesses for easy installation of the AccuGrade Systems.

Product Link

Streamlines diagnostic efforts, and reduces downtime, maintenance scheduling and costs by providing a communication flow of vital machine data and location. Product Link gives automatic updates on machine parameters such as machine hours, machine condition, location, fault codes and alarms directly to your office computer.

Cat ET (Electronic Technician)

Cat ET is a two-way communication tool that gives service technicians easy access to stored diagnostic data, reducing machine downtime and lowering operating costs.

Safety

Caterpillar machines continue to meet or exceed safety standards.

ROPS/FOPS Cab offers Low Sound and Vibration Levels

The operator sound pressure level for the cab offered by Caterpillar, when properly installed, maintained and tested with the doors closed, meets or exceeds requirements set forth in ISO 6394:1998. The quiet environment improves operator working conditions. Steel non-skid steps use raised perforations to provide sturdy access to the tandems.

Brake Systems and Machine Protection

Brakes located at each tandem wheel offer the largest total brake surface area in the industry, delivering dependable stopping power and longer brake life. Standard circle drive slip clutch protects the drawbar, circle and moldboard from shock loads when the blade encounters an immovable object. Blade lift accumulators help absorb impact loads to the moldboard by allowing vertical blade travel.

Electrical Disconnect Switch and Engine Shutoff Switch

Disconnect switch provides ground-level lockout of the electrical system to prevent inadvertent machine starts. Engine shutoff allows anyone nearby to shut the machine down in case of an emergency.

Additional Safety Features

Laminated glass on the front windows and lockable doors to reduce theft and vandalism are available with the optional cab. Brake lights, conveniently located grab rails, back up lights and alarm also help ensure a safe work environment.

Complete Customer Support

Cat dealers offer services to help you operate longer with lower costs.

Your Cat dealer is ready to assist you with your purchase decision and everything after.

• Your Cat dealer can help you make detailed comparisons of the machines you're considering. How long do components last? What is the cost of preventive maintenance? What is the true cost of lost production
• Look past initial price. Many dealers offer services that can be included in the cost of the machine to yield lower equipment owning and operating costs over the long run
• Smart equipment buyers plan for effective maintenance before buying equipment. Ask your Cat dealer about maintenance services before you make your purchase. Repair option programs guarantee the cost of repairs up front. Diagnostic programs such as Scheduled Oil Sampling and Technical Analysis help avoid unscheduled repairs
• You will find nearly all parts at our dealer parts counter. In the rare case when we don't have a part in stock, our dealer network will find it and get it to you fast
• Improving operating techniques can boost customer profits. Ask your Cat dealer about training videos, literature and other ideas to help you increase productivity. Caterpillar offers certified operator training classes to help you maximize the return on your machine investment
• Your Cat dealer can evaluate the cost to repair, rebuild and replace your machine, so you can make the right choice
• For more information on Cat products, dealer services and industry solutions, visit us at www.cat.com.

Serviceability

Convenient service points make routine maintenance quick and easy.

Grouped Service Points on the left side to help ensure proper maintenance

Easy access to service areas speeds up maintenance and ensures that routine service is performed on time. Ecology drains shorten service times and help prevent spills. Radiator cleanout access gives the operator the ability to clear away debris and other materials that build up around the radiator. Fuel water separator is easily accessible from the ground.

Extended Service Intervals Reduce Downtime, Operating Cost

• 500 hour engine oil changes
• 4,000 hour hydraulic oil changes
• 12,000 hour engine coolant changes

Diagnostics and Machine Monitoring via Electronic Technician

The dash cluster panel provides enhanced machine information and diagnostic capability, which allows faster servicing of the transmission and engine. Cat ET is a two-way communication tool that gives service technicians easy access to stored diagnostic data and lets them configure the machine parameters through the Cat Data Link.

O-Ring Face Seals

O-Ring face seals create a reliable connection and are used in all hydraulic circuits to minimize the possibility of oil leaks.

Separate Wiring Harnesses

This modular harness design provides simple disconnects for major machine repairs or rebuilds.

ELECTRICAL

 Alternator, 95 ampere, sealed

 Backup alarm, reversing lights

 Batteries, maintenance free 750 CCA

 Electrical system, 24 volt

 Horn, electric

 Lights, stop and tail

 Motor, starting

 Product Link Ready

 Working lights

OPERATOR ENVIRONMENT

 Accelerator

 Control console, adjustable

 Gauge cluster (includes voltmeter, articulation, engine coolant temperature, air brake pressure and fuel level)

 Guard rails, operator station

 Hydraulic controls, load sensing (right/left blade lift, circle drive, centershift, sideshift, blade tip, front wheel lean and articulation)

 Indicator lights (includes high beam, LH and RH turn, low engine oil pressure, throttle lock, check engine, transmission filter bypass and check, centershift pin, brake air pressure, parking brake engaged, AccuGrade, auto shift)

 Key start/stop switch

 Meter, hour

 Power steering, hydraulic

 Seat, vinyl-covered static

 Seat belt

 Steering wheel, tilt, adjustable

 Storage area, cooler/lunch box

 Throttle, electronic control

Accelerator

 Alternator, 95 ampere, sealed

 Backup alarm, reversing lights

 Batteries, maintenance free 750 CCA

 Electrical system, 24 volt

 Horn, electric

 Lights, stop and tail

 Motor, starting

 Product Link Ready

 Working lights

 Accelerator

 Control console, adjustable

 Gauge cluster (includes voltmeter, articulation, engine coolant temperature, air brake pressure and fuel level)

 Guard rails, operator station

 Hydraulic controls, load sensing (right/left blade lift, circle drive, centershift, sideshift, blade tip, front wheel lean and articulation)

 Indicator lights (includes high beam, LH and RH turn, low engine oil pressure, throttle lock, check engine, transmission filter bypass and check, centershift pin, brake air pressure, parking brake engaged, AccuGrade, auto shift)

 Key start/stop switch

 Meter, hour

 Power steering, hydraulic

 Seat, vinyl-covered static

 Seat belt

 Steering wheel, tilt, adjustable

 Storage area, cooler/lunch box

 Throttle, electronic control

 Air cleaner, dry type radial seal with service indicator and automatic dust ejector

 Air to air after cooler (ATAAC)

 Blower fan

 Brakes, oil disc, four-wheel air actuated

 Differential with lock/unlock

 Engine, Cat C7 with ACERT technology, diesel with automatic engine derate and idle control. Meets U.S. EPA Tier 2 and EU Stage II emission standards.

 Fuel water separator

 Muffler, under hood

 Parking brake, multi-disc, sealed and oil cooled

 Prescreener

 Priming pump, fuel, resiliently mounted

 Sediment drain, fuel tank

 Tandem drive

 Transmission, 8 speed forward and 6 speed reverse, power shift, direct drive with electronic shift control and overspeed protection

 VHP (Variable Horsepower)

 Bumper, rear

 CD ROM Parts Book

 Circle drive slip clutch

 Cutting edges, 152 mm × 16 mm (6 in × 5/8 in) curved DH-2 steel

 Doors, Engine compartment

 Drawbar, 6 shoes with replaceable nylon composite wear strips

 Endbits, 16 mm (5/8 in) DH-2 steel

 Frame, articulated with safety lock

 Fuel tank, 305 L (80.6 gal)

 Ground level engine shutdown

 Link bar, 7 position

 Moldboard, 3658 mm × 610 mm × 22 mm (12 ft × 24 in × 7/8 in) blade with hydraulic sideshift and tip

 S·O·S ports, engine, hydraulic, transmission and cooling

 Toolbox with padlock

 Vandalism protection - including cap locks for hydraulic tank, radiator access cover, fuel tank, engine and transmission oil check/fill and lockable battery boxes.

 A partial allowance for tires on 229 mm (9 in) single piece rims is included in the base machine price and weight. A tire MUST be selected from the Mandatory Attachments section.

 Extended Life Coolant to -35° C (-30° F)

Control console, adjustable

 Alternator, 95 ampere, sealed

 Backup alarm, reversing lights

 Batteries, maintenance free 750 CCA

 Electrical system, 24 volt

 Horn, electric

 Lights, stop and tail

 Motor, starting

 Product Link Ready

 Working lights

 Accelerator

 Control console, adjustable

 Gauge cluster (includes voltmeter, articulation, engine coolant temperature, air brake pressure and fuel level)

 Guard rails, operator station

 Hydraulic controls, load sensing (right/left blade lift, circle drive, centershift, sideshift, blade tip, front wheel lean and articulation)

 Indicator lights (includes high beam, LH and RH turn, low engine oil pressure, throttle lock, check engine, transmission filter bypass and check, centershift pin, brake air pressure, parking brake engaged, AccuGrade, auto shift)

 Key start/stop switch

 Meter, hour

 Power steering, hydraulic

 Seat, vinyl-covered static

 Seat belt

 Steering wheel, tilt, adjustable

 Storage area, cooler/lunch box

 Throttle, electronic control

 Air cleaner, dry type radial seal with service indicator and automatic dust ejector

 Air to air after cooler (ATAAC)

 Blower fan

 Brakes, oil disc, four-wheel air actuated

 Differential with lock/unlock

 Engine, Cat C7 with ACERT technology, diesel with automatic engine derate and idle control. Meets U.S. EPA Tier 2 and EU Stage II emission standards.

 Fuel water separator

 Muffler, under hood

 Parking brake, multi-disc, sealed and oil cooled

 Prescreener

 Priming pump, fuel, resiliently mounted

 Sediment drain, fuel tank

 Tandem drive

 Transmission, 8 speed forward and 6 speed reverse, power shift, direct drive with electronic shift control and overspeed protection

 VHP (Variable Horsepower)

 Bumper, rear

 CD ROM Parts Book

 Circle drive slip clutch

 Cutting edges, 152 mm × 16 mm (6 in × 5/8 in) curved DH-2 steel

 Doors, Engine compartment

 Drawbar, 6 shoes with replaceable nylon composite wear strips

 Endbits, 16 mm (5/8 in) DH-2 steel

 Frame, articulated with safety lock

 Fuel tank, 305 L (80.6 gal)

 Ground level engine shutdown

 Link bar, 7 position

 Moldboard, 3658 mm × 610 mm × 22 mm (12 ft × 24 in × 7/8 in) blade with hydraulic sideshift and tip

 S·O·S ports, engine, hydraulic, transmission and cooling

 Toolbox with padlock

 Vandalism protection - including cap locks for hydraulic tank, radiator access cover, fuel tank, engine and transmission oil check/fill and lockable battery boxes.

 A partial allowance for tires on 229 mm (9 in) single piece rims is included in the base machine price and weight. A tire MUST be selected from the Mandatory Attachments section.

 Extended Life Coolant to -35° C (-30° F)

Gauge cluster (includes voltmeter, articulation, engine coolant temperature, air brake pressure and fuel level)

 Alternator, 95 ampere, sealed

 Backup alarm, reversing lights

 Batteries, maintenance free 750 CCA

 Electrical system, 24 volt

 Horn, electric

 Lights, stop and tail

 Motor, starting

 Product Link Ready

 Working lights

 Accelerator

 Control console, adjustable

 Gauge cluster (includes voltmeter, articulation, engine coolant temperature, air brake pressure and fuel level)

 Guard rails, operator station

 Hydraulic controls, load sensing (right/left blade lift, circle drive, centershift, sideshift, blade tip, front wheel lean and articulation)

 Indicator lights (includes high beam, LH and RH turn, low engine oil pressure, throttle lock, check engine, transmission filter bypass and check, centershift pin, brake air pressure, parking brake engaged, AccuGrade, auto shift)

 Key start/stop switch

 Meter, hour

 Power steering, hydraulic

 Seat, vinyl-covered static

 Seat belt

 Steering wheel, tilt, adjustable

 Storage area, cooler/lunch box

 Throttle, electronic control

 Air cleaner, dry type radial seal with service indicator and automatic dust ejector

 Air to air after cooler (ATAAC)

 Blower fan

 Brakes, oil disc, four-wheel air actuated

 Differential with lock/unlock

 Engine, Cat C7 with ACERT technology, diesel with automatic engine derate and idle control. Meets U.S. EPA Tier 2 and EU Stage II emission standards.

 Fuel water separator

 Muffler, under hood

 Parking brake, multi-disc, sealed and oil cooled

 Prescreener

 Priming pump, fuel, resiliently mounted

 Sediment drain, fuel tank

 Tandem drive

 Transmission, 8 speed forward and 6 speed reverse, power shift, direct drive with electronic shift control and overspeed protection

 VHP (Variable Horsepower)

 Bumper, rear

 CD ROM Parts Book

 Circle drive slip clutch

 Cutting edges, 152 mm × 16 mm (6 in × 5/8 in) curved DH-2 steel

 Doors, Engine compartment

 Drawbar, 6 shoes with replaceable nylon composite wear strips

 Endbits, 16 mm (5/8 in) DH-2 steel

 Frame, articulated with safety lock

 Fuel tank, 305 L (80.6 gal)

 Ground level engine shutdown

 Link bar, 7 position

 Moldboard, 3658 mm × 610 mm × 22 mm (12 ft × 24 in × 7/8 in) blade with hydraulic sideshift and tip

 S·O·S ports, engine, hydraulic, transmission and cooling

 Toolbox with padlock

 Vandalism protection - including cap locks for hydraulic tank, radiator access cover, fuel tank, engine and transmission oil check/fill and lockable battery boxes.

 A partial allowance for tires on 229 mm (9 in) single piece rims is included in the base machine price and weight. A tire MUST be selected from the Mandatory Attachments section.

 Extended Life Coolant to -35° C (-30° F)

Guard rails, operator station

 Alternator, 95 ampere, sealed

 Backup alarm, reversing lights

 Batteries, maintenance free 750 CCA

 Electrical system, 24 volt

 Horn, electric

 Lights, stop and tail

 Motor, starting

 Product Link Ready

 Working lights

 Accelerator

 Control console, adjustable

 Gauge cluster (includes voltmeter, articulation, engine coolant temperature, air brake pressure and fuel level)

 Guard rails, operator station

 Hydraulic controls, load sensing (right/left blade lift, circle drive, centershift, sideshift, blade tip, front wheel lean and articulation)

 Indicator lights (includes high beam, LH and RH turn, low engine oil pressure, throttle lock, check engine, transmission filter bypass and check, centershift pin, brake air pressure, parking brake engaged, AccuGrade, auto shift)

 Key start/stop switch

 Meter, hour

 Power steering, hydraulic

 Seat, vinyl-covered static

 Seat belt

 Steering wheel, tilt, adjustable

 Storage area, cooler/lunch box

 Throttle, electronic control

 Air cleaner, dry type radial seal with service indicator and automatic dust ejector

 Air to air after cooler (ATAAC)

 Blower fan

 Brakes, oil disc, four-wheel air actuated

 Differential with lock/unlock

 Engine, Cat C7 with ACERT technology, diesel with automatic engine derate and idle control. Meets U.S. EPA Tier 2 and EU Stage II emission standards.

 Fuel water separator

 Muffler, under hood

 Parking brake, multi-disc, sealed and oil cooled

 Prescreener

 Priming pump, fuel, resiliently mounted

 Sediment drain, fuel tank

 Tandem drive

 Transmission, 8 speed forward and 6 speed reverse, power shift, direct drive with electronic shift control and overspeed protection

 VHP (Variable Horsepower)

 Bumper, rear

 CD ROM Parts Book

 Circle drive slip clutch

 Cutting edges, 152 mm × 16 mm (6 in × 5/8 in) curved DH-2 steel

 Doors, Engine compartment

 Drawbar, 6 shoes with replaceable nylon composite wear strips

 Endbits, 16 mm (5/8 in) DH-2 steel

 Frame, articulated with safety lock

 Fuel tank, 305 L (80.6 gal)

 Ground level engine shutdown

 Link bar, 7 position

 Moldboard, 3658 mm × 610 mm × 22 mm (12 ft × 24 in × 7/8 in) blade with hydraulic sideshift and tip

 S·O·S ports, engine, hydraulic, transmission and cooling

 Toolbox with padlock

 Vandalism protection - including cap locks for hydraulic tank, radiator access cover, fuel tank, engine and transmission oil check/fill and lockable battery boxes.

 A partial allowance for tires on 229 mm (9 in) single piece rims is included in the base machine price and weight. A tire MUST be selected from the Mandatory Attachments section.

 Extended Life Coolant to -35° C (-30° F)

Hydraulic controls, load sensing (right/left blade lift, circle drive, centershift, sideshift, blade tip, front wheel lean and articulation)

 Alternator, 95 ampere, sealed

 Backup alarm, reversing lights

 Batteries, maintenance free 750 CCA

 Electrical system, 24 volt

 Horn, electric

 Lights, stop and tail

 Motor, starting

 Product Link Ready

 Working lights

 Accelerator

 Control console, adjustable

 Gauge cluster (includes voltmeter, articulation, engine coolant temperature, air brake pressure and fuel level)

 Guard rails, operator station

 Hydraulic controls, load sensing (right/left blade lift, circle drive, centershift, sideshift, blade tip, front wheel lean and articulation)

 Indicator lights (includes high beam, LH and RH turn, low engine oil pressure, throttle lock, check engine, transmission filter bypass and check, centershift pin, brake air pressure, parking brake engaged, AccuGrade, auto shift)

 Key start/stop switch

 Meter, hour

 Power steering, hydraulic

 Seat, vinyl-covered static

 Seat belt

 Steering wheel, tilt, adjustable

 Storage area, cooler/lunch box

 Throttle, electronic control

 Air cleaner, dry type radial seal with service indicator and automatic dust ejector

 Air to air after cooler (ATAAC)

 Blower fan

 Brakes, oil disc, four-wheel air actuated

 Differential with lock/unlock

 Engine, Cat C7 with ACERT technology, diesel with automatic engine derate and idle control. Meets U.S. EPA Tier 2 and EU Stage II emission standards.

 Fuel water separator

 Muffler, under hood

 Parking brake, multi-disc, sealed and oil cooled

 Prescreener

 Priming pump, fuel, resiliently mounted

 Sediment drain, fuel tank

 Tandem drive

 Transmission, 8 speed forward and 6 speed reverse, power shift, direct drive with electronic shift control and overspeed protection

 VHP (Variable Horsepower)

 Bumper, rear

 CD ROM Parts Book

 Circle drive slip clutch

 Cutting edges, 152 mm × 16 mm (6 in × 5/8 in) curved DH-2 steel

 Doors, Engine compartment

 Drawbar, 6 shoes with replaceable nylon composite wear strips

 Endbits, 16 mm (5/8 in) DH-2 steel

 Frame, articulated with safety lock

 Fuel tank, 305 L (80.6 gal)

 Ground level engine shutdown

 Link bar, 7 position

 Moldboard, 3658 mm × 610 mm × 22 mm (12 ft × 24 in × 7/8 in) blade with hydraulic sideshift and tip

 S·O·S ports, engine, hydraulic, transmission and cooling

 Toolbox with padlock

 Vandalism protection - including cap locks for hydraulic tank, radiator access cover, fuel tank, engine and transmission oil check/fill and lockable battery boxes.

 A partial allowance for tires on 229 mm (9 in) single piece rims is included in the base machine price and weight. A tire MUST be selected from the Mandatory Attachments section.

 Extended Life Coolant to -35° C (-30° F)

Indicator lights (includes high beam, LH and RH turn, low engine oil pressure, throttle lock, check engine, transmission filter bypass and check, centershift pin, brake air pressure, parking brake engaged, AccuGrade, auto shift)

 Alternator, 95 ampere, sealed

 Backup alarm, reversing lights

 Batteries, maintenance free 750 CCA

 Electrical system, 24 volt

 Horn, electric

 Lights, stop and tail

 Motor, starting

 Product Link Ready

 Working lights

 Accelerator

 Control console, adjustable

 Gauge cluster (includes voltmeter, articulation, engine coolant temperature, air brake pressure and fuel level)

 Guard rails, operator station

 Hydraulic controls, load sensing (right/left blade lift, circle drive, centershift, sideshift, blade tip, front wheel lean and articulation)

 Indicator lights (includes high beam, LH and RH turn, low engine oil pressure, throttle lock, check engine, transmission filter bypass and check, centershift pin, brake air pressure, parking brake engaged, AccuGrade, auto shift)

 Key start/stop switch

 Meter, hour

 Power steering, hydraulic

 Seat, vinyl-covered static

 Seat belt

 Steering wheel, tilt, adjustable

 Storage area, cooler/lunch box

 Throttle, electronic control

 Air cleaner, dry type radial seal with service indicator and automatic dust ejector

 Air to air after cooler (ATAAC)

 Blower fan

 Brakes, oil disc, four-wheel air actuated

 Differential with lock/unlock

 Engine, Cat C7 with ACERT technology, diesel with automatic engine derate and idle control. Meets U.S. EPA Tier 2 and EU Stage II emission standards.

 Fuel water separator

 Muffler, under hood

 Parking brake, multi-disc, sealed and oil cooled

 Prescreener

 Priming pump, fuel, resiliently mounted

 Sediment drain, fuel tank

 Tandem drive

 Transmission, 8 speed forward and 6 speed reverse, power shift, direct drive with electronic shift control and overspeed protection

 VHP (Variable Horsepower)

 Bumper, rear

 CD ROM Parts Book

 Circle drive slip clutch

 Cutting edges, 152 mm × 16 mm (6 in × 5/8 in) curved DH-2 steel

 Doors, Engine compartment

 Drawbar, 6 shoes with replaceable nylon composite wear strips

 Endbits, 16 mm (5/8 in) DH-2 steel

 Frame, articulated with safety lock

 Fuel tank, 305 L (80.6 gal)

 Ground level engine shutdown

 Link bar, 7 position

 Moldboard, 3658 mm × 610 mm × 22 mm (12 ft × 24 in × 7/8 in) blade with hydraulic sideshift and tip

 S·O·S ports, engine, hydraulic, transmission and cooling

 Toolbox with padlock

 Vandalism protection - including cap locks for hydraulic tank, radiator access cover, fuel tank, engine and transmission oil check/fill and lockable battery boxes.

 A partial allowance for tires on 229 mm (9 in) single piece rims is included in the base machine price and weight. A tire MUST be selected from the Mandatory Attachments section.

 Extended Life Coolant to -35° C (-30° F)

Key start/stop switch

 Alternator, 95 ampere, sealed

 Backup alarm, reversing lights

 Batteries, maintenance free 750 CCA

 Electrical system, 24 volt

 Horn, electric

 Lights, stop and tail

 Motor, starting

 Product Link Ready

 Working lights

 Accelerator

 Control console, adjustable

 Gauge cluster (includes voltmeter, articulation, engine coolant temperature, air brake pressure and fuel level)

 Guard rails, operator station

 Hydraulic controls, load sensing (right/left blade lift, circle drive, centershift, sideshift, blade tip, front wheel lean and articulation)

 Indicator lights (includes high beam, LH and RH turn, low engine oil pressure, throttle lock, check engine, transmission filter bypass and check, centershift pin, brake air pressure, parking brake engaged, AccuGrade, auto shift)

 Key start/stop switch

 Meter, hour

 Power steering, hydraulic

 Seat, vinyl-covered static

 Seat belt

 Steering wheel, tilt, adjustable

 Storage area, cooler/lunch box

 Throttle, electronic control

 Air cleaner, dry type radial seal with service indicator and automatic dust ejector

 Air to air after cooler (ATAAC)

 Blower fan

 Brakes, oil disc, four-wheel air actuated

 Differential with lock/unlock

 Engine, Cat C7 with ACERT technology, diesel with automatic engine derate and idle control. Meets U.S. EPA Tier 2 and EU Stage II emission standards.

 Fuel water separator

 Muffler, under hood

 Parking brake, multi-disc, sealed and oil cooled

 Prescreener

 Priming pump, fuel, resiliently mounted

 Sediment drain, fuel tank

 Tandem drive

 Transmission, 8 speed forward and 6 speed reverse, power shift, direct drive with electronic shift control and overspeed protection

 VHP (Variable Horsepower)

 Bumper, rear

 CD ROM Parts Book

 Circle drive slip clutch

 Cutting edges, 152 mm × 16 mm (6 in × 5/8 in) curved DH-2 steel

 Doors, Engine compartment

 Drawbar, 6 shoes with replaceable nylon composite wear strips

 Endbits, 16 mm (5/8 in) DH-2 steel

 Frame, articulated with safety lock

 Fuel tank, 305 L (80.6 gal)

 Ground level engine shutdown

 Link bar, 7 position

 Moldboard, 3658 mm × 610 mm × 22 mm (12 ft × 24 in × 7/8 in) blade with hydraulic sideshift and tip

 S·O·S ports, engine, hydraulic, transmission and cooling

 Toolbox with padlock

 Vandalism protection - including cap locks for hydraulic tank, radiator access cover, fuel tank, engine and transmission oil check/fill and lockable battery boxes.

 A partial allowance for tires on 229 mm (9 in) single piece rims is included in the base machine price and weight. A tire MUST be selected from the Mandatory Attachments section.

 Extended Life Coolant to -35° C (-30° F)

Meter, hour

 Alternator, 95 ampere, sealed

 Backup alarm, reversing lights

 Batteries, maintenance free 750 CCA

 Electrical system, 24 volt

 Horn, electric

 Lights, stop and tail

 Motor, starting

 Product Link Ready

 Working lights

 Accelerator

 Control console, adjustable

 Gauge cluster (includes voltmeter, articulation, engine coolant temperature, air brake pressure and fuel level)

 Guard rails, operator station

 Hydraulic controls, load sensing (right/left blade lift, circle drive, centershift, sideshift, blade tip, front wheel lean and articulation)

 Indicator lights (includes high beam, LH and RH turn, low engine oil pressure, throttle lock, check engine, transmission filter bypass and check, centershift pin, brake air pressure, parking brake engaged, AccuGrade, auto shift)

 Key start/stop switch

 Meter, hour

 Power steering, hydraulic

 Seat, vinyl-covered static

 Seat belt

 Steering wheel, tilt, adjustable

 Storage area, cooler/lunch box

 Throttle, electronic control

 Air cleaner, dry type radial seal with service indicator and automatic dust ejector

 Air to air after cooler (ATAAC)

 Blower fan

 Brakes, oil disc, four-wheel air actuated

 Differential with lock/unlock

 Engine, Cat C7 with ACERT technology, diesel with automatic engine derate and idle control. Meets U.S. EPA Tier 2 and EU Stage II emission standards.

 Fuel water separator

 Muffler, under hood

 Parking brake, multi-disc, sealed and oil cooled

 Prescreener

 Priming pump, fuel, resiliently mounted

 Sediment drain, fuel tank

 Tandem drive

 Transmission, 8 speed forward and 6 speed reverse, power shift, direct drive with electronic shift control and overspeed protection

 VHP (Variable Horsepower)

 Bumper, rear

 CD ROM Parts Book

 Circle drive slip clutch

 Cutting edges, 152 mm × 16 mm (6 in × 5/8 in) curved DH-2 steel

 Doors, Engine compartment

 Drawbar, 6 shoes with replaceable nylon composite wear strips

 Endbits, 16 mm (5/8 in) DH-2 steel

 Frame, articulated with safety lock

 Fuel tank, 305 L (80.6 gal)

 Ground level engine shutdown

 Link bar, 7 position

 Moldboard, 3658 mm × 610 mm × 22 mm (12 ft × 24 in × 7/8 in) blade with hydraulic sideshift and tip

 S·O·S ports, engine, hydraulic, transmission and cooling

 Toolbox with padlock

 Vandalism protection - including cap locks for hydraulic tank, radiator access cover, fuel tank, engine and transmission oil check/fill and lockable battery boxes.

 A partial allowance for tires on 229 mm (9 in) single piece rims is included in the base machine price and weight. A tire MUST be selected from the Mandatory Attachments section.

 Extended Life Coolant to -35° C (-30° F)

Power steering, hydraulic

 Alternator, 95 ampere, sealed

 Backup alarm, reversing lights

 Batteries, maintenance free 750 CCA

 Electrical system, 24 volt

 Horn, electric

 Lights, stop and tail

 Motor, starting

 Product Link Ready

 Working lights

 Accelerator

 Control console, adjustable

 Gauge cluster (includes voltmeter, articulation, engine coolant temperature, air brake pressure and fuel level)

 Guard rails, operator station

 Hydraulic controls, load sensing (right/left blade lift, circle drive, centershift, sideshift, blade tip, front wheel lean and articulation)

 Indicator lights (includes high beam, LH and RH turn, low engine oil pressure, throttle lock, check engine, transmission filter bypass and check, centershift pin, brake air pressure, parking brake engaged, AccuGrade, auto shift)

 Key start/stop switch

 Meter, hour

 Power steering, hydraulic

 Seat, vinyl-covered static

 Seat belt

 Steering wheel, tilt, adjustable

 Storage area, cooler/lunch box

 Throttle, electronic control

 Air cleaner, dry type radial seal with service indicator and automatic dust ejector

 Air to air after cooler (ATAAC)

 Blower fan

 Brakes, oil disc, four-wheel air actuated

 Differential with lock/unlock

 Engine, Cat C7 with ACERT technology, diesel with automatic engine derate and idle control. Meets U.S. EPA Tier 2 and EU Stage II emission standards.

 Fuel water separator

 Muffler, under hood

 Parking brake, multi-disc, sealed and oil cooled

 Prescreener

 Priming pump, fuel, resiliently mounted

 Sediment drain, fuel tank

 Tandem drive

 Transmission, 8 speed forward and 6 speed reverse, power shift, direct drive with electronic shift control and overspeed protection

 VHP (Variable Horsepower)

 Bumper, rear

 CD ROM Parts Book

 Circle drive slip clutch

 Cutting edges, 152 mm × 16 mm (6 in × 5/8 in) curved DH-2 steel

 Doors, Engine compartment

 Drawbar, 6 shoes with replaceable nylon composite wear strips

 Endbits, 16 mm (5/8 in) DH-2 steel

 Frame, articulated with safety lock

 Fuel tank, 305 L (80.6 gal)

 Ground level engine shutdown

 Link bar, 7 position

 Moldboard, 3658 mm × 610 mm × 22 mm (12 ft × 24 in × 7/8 in) blade with hydraulic sideshift and tip

 S·O·S ports, engine, hydraulic, transmission and cooling

 Toolbox with padlock

 Vandalism protection - including cap locks for hydraulic tank, radiator access cover, fuel tank, engine and transmission oil check/fill and lockable battery boxes.

 A partial allowance for tires on 229 mm (9 in) single piece rims is included in the base machine price and weight. A tire MUST be selected from the Mandatory Attachments section.

 Extended Life Coolant to -35° C (-30° F)

Seat, vinyl-covered static

 Alternator, 95 ampere, sealed

 Backup alarm, reversing lights

 Batteries, maintenance free 750 CCA

 Electrical system, 24 volt

 Horn, electric

 Lights, stop and tail

 Motor, starting

 Product Link Ready

 Working lights

 Accelerator

 Control console, adjustable

 Gauge cluster (includes voltmeter, articulation, engine coolant temperature, air brake pressure and fuel level)

 Guard rails, operator station

 Hydraulic controls, load sensing (right/left blade lift, circle drive, centershift, sideshift, blade tip, front wheel lean and articulation)

 Indicator lights (includes high beam, LH and RH turn, low engine oil pressure, throttle lock, check engine, transmission filter bypass and check, centershift pin, brake air pressure, parking brake engaged, AccuGrade, auto shift)

 Key start/stop switch

 Meter, hour

 Power steering, hydraulic

 Seat, vinyl-covered static

 Seat belt

 Steering wheel, tilt, adjustable

 Storage area, cooler/lunch box

 Throttle, electronic control

 Air cleaner, dry type radial seal with service indicator and automatic dust ejector

 Air to air after cooler (ATAAC)

 Blower fan

 Brakes, oil disc, four-wheel air actuated

 Differential with lock/unlock

 Engine, Cat C7 with ACERT technology, diesel with automatic engine derate and idle control. Meets U.S. EPA Tier 2 and EU Stage II emission standards.

 Fuel water separator

 Muffler, under hood

 Parking brake, multi-disc, sealed and oil cooled

 Prescreener

 Priming pump, fuel, resiliently mounted

 Sediment drain, fuel tank

 Tandem drive

 Transmission, 8 speed forward and 6 speed reverse, power shift, direct drive with electronic shift control and overspeed protection

 VHP (Variable Horsepower)

 Bumper, rear

 CD ROM Parts Book

 Circle drive slip clutch

 Cutting edges, 152 mm × 16 mm (6 in × 5/8 in) curved DH-2 steel

 Doors, Engine compartment

 Drawbar, 6 shoes with replaceable nylon composite wear strips

 Endbits, 16 mm (5/8 in) DH-2 steel

 Frame, articulated with safety lock

 Fuel tank, 305 L (80.6 gal)

 Ground level engine shutdown

 Link bar, 7 position

 Moldboard, 3658 mm × 610 mm × 22 mm (12 ft × 24 in × 7/8 in) blade with hydraulic sideshift and tip

 S·O·S ports, engine, hydraulic, transmission and cooling

 Toolbox with padlock

 Vandalism protection - including cap locks for hydraulic tank, radiator access cover, fuel tank, engine and transmission oil check/fill and lockable battery boxes.

 A partial allowance for tires on 229 mm (9 in) single piece rims is included in the base machine price and weight. A tire MUST be selected from the Mandatory Attachments section.

 Extended Life Coolant to -35° C (-30° F)

Seat belt

 Alternator, 95 ampere, sealed

 Backup alarm, reversing lights

 Batteries, maintenance free 750 CCA

 Electrical system, 24 volt

 Horn, electric

 Lights, stop and tail

 Motor, starting

 Product Link Ready

 Working lights

 Accelerator

 Control console, adjustable

 Gauge cluster (includes voltmeter, articulation, engine coolant temperature, air brake pressure and fuel level)

 Guard rails, operator station

 Hydraulic controls, load sensing (right/left blade lift, circle drive, centershift, sideshift, blade tip, front wheel lean and articulation)

 Indicator lights (includes high beam, LH and RH turn, low engine oil pressure, throttle lock, check engine, transmission filter bypass and check, centershift pin, brake air pressure, parking brake engaged, AccuGrade, auto shift)

 Key start/stop switch

 Meter, hour

 Power steering, hydraulic

 Seat, vinyl-covered static

 Seat belt

 Steering wheel, tilt, adjustable

 Storage area, cooler/lunch box

 Throttle, electronic control

 Air cleaner, dry type radial seal with service indicator and automatic dust ejector

 Air to air after cooler (ATAAC)

 Blower fan

 Brakes, oil disc, four-wheel air actuated

 Differential with lock/unlock

 Engine, Cat C7 with ACERT technology, diesel with automatic engine derate and idle control. Meets U.S. EPA Tier 2 and EU Stage II emission standards.

 Fuel water separator

 Muffler, under hood

 Parking brake, multi-disc, sealed and oil cooled

 Prescreener

 Priming pump, fuel, resiliently mounted

 Sediment drain, fuel tank

 Tandem drive

 Transmission, 8 speed forward and 6 speed reverse, power shift, direct drive with electronic shift control and overspeed protection

 VHP (Variable Horsepower)

 Bumper, rear

 CD ROM Parts Book

 Circle drive slip clutch

 Cutting edges, 152 mm × 16 mm (6 in × 5/8 in) curved DH-2 steel

 Doors, Engine compartment

 Drawbar, 6 shoes with replaceable nylon composite wear strips

 Endbits, 16 mm (5/8 in) DH-2 steel

 Frame, articulated with safety lock

 Fuel tank, 305 L (80.6 gal)

 Ground level engine shutdown

 Link bar, 7 position

 Moldboard, 3658 mm × 610 mm × 22 mm (12 ft × 24 in × 7/8 in) blade with hydraulic sideshift and tip

 S·O·S ports, engine, hydraulic, transmission and cooling

 Toolbox with padlock

 Vandalism protection - including cap locks for hydraulic tank, radiator access cover, fuel tank, engine and transmission oil check/fill and lockable battery boxes.

 A partial allowance for tires on 229 mm (9 in) single piece rims is included in the base machine price and weight. A tire MUST be selected from the Mandatory Attachments section.

 Extended Life Coolant to -35° C (-30° F)

Steering wheel, tilt, adjustable

 Alternator, 95 ampere, sealed

 Backup alarm, reversing lights

 Batteries, maintenance free 750 CCA

 Electrical system, 24 volt

 Horn, electric

 Lights, stop and tail

 Motor, starting

 Product Link Ready

 Working lights

 Accelerator

 Control console, adjustable

 Gauge cluster (includes voltmeter, articulation, engine coolant temperature, air brake pressure and fuel level)

 Guard rails, operator station

 Hydraulic controls, load sensing (right/left blade lift, circle drive, centershift, sideshift, blade tip, front wheel lean and articulation)

 Indicator lights (includes high beam, LH and RH turn, low engine oil pressure, throttle lock, check engine, transmission filter bypass and check, centershift pin, brake air pressure, parking brake engaged, AccuGrade, auto shift)

 Key start/stop switch

 Meter, hour

 Power steering, hydraulic

 Seat, vinyl-covered static

 Seat belt

 Steering wheel, tilt, adjustable

 Storage area, cooler/lunch box

 Throttle, electronic control

 Air cleaner, dry type radial seal with service indicator and automatic dust ejector

 Air to air after cooler (ATAAC)

 Blower fan

 Brakes, oil disc, four-wheel air actuated

 Differential with lock/unlock

 Engine, Cat C7 with ACERT technology, diesel with automatic engine derate and idle control. Meets U.S. EPA Tier 2 and EU Stage II emission standards.

 Fuel water separator

 Muffler, under hood

 Parking brake, multi-disc, sealed and oil cooled

 Prescreener

 Priming pump, fuel, resiliently mounted

 Sediment drain, fuel tank

 Tandem drive

 Transmission, 8 speed forward and 6 speed reverse, power shift, direct drive with electronic shift control and overspeed protection

 VHP (Variable Horsepower)

 Bumper, rear

 CD ROM Parts Book

 Circle drive slip clutch

 Cutting edges, 152 mm × 16 mm (6 in × 5/8 in) curved DH-2 steel

 Doors, Engine compartment

 Drawbar, 6 shoes with replaceable nylon composite wear strips

 Endbits, 16 mm (5/8 in) DH-2 steel

 Frame, articulated with safety lock

 Fuel tank, 305 L (80.6 gal)

 Ground level engine shutdown

 Link bar, 7 position

 Moldboard, 3658 mm × 610 mm × 22 mm (12 ft × 24 in × 7/8 in) blade with hydraulic sideshift and tip

 S·O·S ports, engine, hydraulic, transmission and cooling

 Toolbox with padlock

 Vandalism protection - including cap locks for hydraulic tank, radiator access cover, fuel tank, engine and transmission oil check/fill and lockable battery boxes.

 A partial allowance for tires on 229 mm (9 in) single piece rims is included in the base machine price and weight. A tire MUST be selected from the Mandatory Attachments section.

 Extended Life Coolant to -35° C (-30° F)

Storage area, cooler/lunch box

 Alternator, 95 ampere, sealed

 Backup alarm, reversing lights

 Batteries, maintenance free 750 CCA

 Electrical system, 24 volt

 Horn, electric

 Lights, stop and tail

 Motor, starting

 Product Link Ready

 Working lights

 Accelerator

 Control console, adjustable

 Gauge cluster (includes voltmeter, articulation, engine coolant temperature, air brake pressure and fuel level)

 Guard rails, operator station

 Hydraulic controls, load sensing (right/left blade lift, circle drive, centershift, sideshift, blade tip, front wheel lean and articulation)

 Indicator lights (includes high beam, LH and RH turn, low engine oil pressure, throttle lock, check engine, transmission filter bypass and check, centershift pin, brake air pressure, parking brake engaged, AccuGrade, auto shift)

 Key start/stop switch

 Meter, hour

 Power steering, hydraulic

 Seat, vinyl-covered static

 Seat belt

 Steering wheel, tilt, adjustable

 Storage area, cooler/lunch box

 Throttle, electronic control

 Air cleaner, dry type radial seal with service indicator and automatic dust ejector

 Air to air after cooler (ATAAC)

 Blower fan

 Brakes, oil disc, four-wheel air actuated

 Differential with lock/unlock

 Engine, Cat C7 with ACERT technology, diesel with automatic engine derate and idle control. Meets U.S. EPA Tier 2 and EU Stage II emission standards.

 Fuel water separator

 Muffler, under hood

 Parking brake, multi-disc, sealed and oil cooled

 Prescreener

 Priming pump, fuel, resiliently mounted

 Sediment drain, fuel tank

 Tandem drive

 Transmission, 8 speed forward and 6 speed reverse, power shift, direct drive with electronic shift control and overspeed protection

 VHP (Variable Horsepower)

 Bumper, rear

 CD ROM Parts Book

 Circle drive slip clutch

 Cutting edges, 152 mm × 16 mm (6 in × 5/8 in) curved DH-2 steel

 Doors, Engine compartment

 Drawbar, 6 shoes with replaceable nylon composite wear strips

 Endbits, 16 mm (5/8 in) DH-2 steel

 Frame, articulated with safety lock

 Fuel tank, 305 L (80.6 gal)

 Ground level engine shutdown

 Link bar, 7 position

 Moldboard, 3658 mm × 610 mm × 22 mm (12 ft × 24 in × 7/8 in) blade with hydraulic sideshift and tip

 S·O·S ports, engine, hydraulic, transmission and cooling

 Toolbox with padlock

 Vandalism protection - including cap locks for hydraulic tank, radiator access cover, fuel tank, engine and transmission oil check/fill and lockable battery boxes.

 A partial allowance for tires on 229 mm (9 in) single piece rims is included in the base machine price and weight. A tire MUST be selected from the Mandatory Attachments section.

 Extended Life Coolant to -35° C (-30° F)

Throttle, electronic control

 Alternator, 95 ampere, sealed

 Backup alarm, reversing lights

 Batteries, maintenance free 750 CCA

 Electrical system, 24 volt

 Horn, electric

 Lights, stop and tail

 Motor, starting

 Product Link Ready

 Working lights

 Accelerator

 Control console, adjustable

 Gauge cluster (includes voltmeter, articulation, engine coolant temperature, air brake pressure and fuel level)

 Guard rails, operator station

 Hydraulic controls, load sensing (right/left blade lift, circle drive, centershift, sideshift, blade tip, front wheel lean and articulation)

 Indicator lights (includes high beam, LH and RH turn, low engine oil pressure, throttle lock, check engine, transmission filter bypass and check, centershift pin, brake air pressure, parking brake engaged, AccuGrade, auto shift)

 Key start/stop switch

 Meter, hour

 Power steering, hydraulic

 Seat, vinyl-covered static

 Seat belt

 Steering wheel, tilt, adjustable

 Storage area, cooler/lunch box

 Throttle, electronic control

 Air cleaner, dry type radial seal with service indicator and automatic dust ejector

 Air to air after cooler (ATAAC)

 Blower fan

 Brakes, oil disc, four-wheel air actuated

 Differential with lock/unlock

 Engine, Cat C7 with ACERT technology, diesel with automatic engine derate and idle control. Meets U.S. EPA Tier 2 and EU Stage II emission standards.

 Fuel water separator

 Muffler, under hood

 Parking brake, multi-disc, sealed and oil cooled

 Prescreener

 Priming pump, fuel, resiliently mounted

 Sediment drain, fuel tank

 Tandem drive

 Transmission, 8 speed forward and 6 speed reverse, power shift, direct drive with electronic shift control and overspeed protection

 VHP (Variable Horsepower)

 Bumper, rear

 CD ROM Parts Book

 Circle drive slip clutch

 Cutting edges, 152 mm × 16 mm (6 in × 5/8 in) curved DH-2 steel

 Doors, Engine compartment

 Drawbar, 6 shoes with replaceable nylon composite wear strips

 Endbits, 16 mm (5/8 in) DH-2 steel

 Frame, articulated with safety lock

 Fuel tank, 305 L (80.6 gal)

 Ground level engine shutdown

 Link bar, 7 position

 Moldboard, 3658 mm × 610 mm × 22 mm (12 ft × 24 in × 7/8 in) blade with hydraulic sideshift and tip

 S·O·S ports, engine, hydraulic, transmission and cooling

 Toolbox with padlock

 Vandalism protection - including cap locks for hydraulic tank, radiator access cover, fuel tank, engine and transmission oil check/fill and lockable battery boxes.

 A partial allowance for tires on 229 mm (9 in) single piece rims is included in the base machine price and weight. A tire MUST be selected from the Mandatory Attachments section.

 Extended Life Coolant to -35° C (-30° F)

POWER TRAIN

 Air cleaner, dry type radial seal with service indicator and automatic dust ejector

 Air to air after cooler (ATAAC)

 Blower fan

 Brakes, oil disc, four-wheel air actuated

 Differential with lock/unlock

 Engine, Cat C7 with ACERT technology, diesel with automatic engine derate and idle control. Meets U.S. EPA Tier 2 and EU Stage II emission standards.

 Fuel water separator

 Muffler, under hood

 Parking brake, multi-disc, sealed and oil cooled

 Prescreener

 Priming pump, fuel, resiliently mounted

 Sediment drain, fuel tank

 Tandem drive

 Transmission, 8 speed forward and 6 speed reverse, power shift, direct drive with electronic shift control and overspeed protection

 VHP (Variable Horsepower)

OTHER STANDARD EQUIPMENT

 Bumper, rear

 CD ROM Parts Book

 Circle drive slip clutch

 Cutting edges, 152 mm × 16 mm (6 in × 5/8 in) curved DH-2 steel

 Doors, Engine compartment

 Drawbar, 6 shoes with replaceable nylon composite wear strips

 Endbits, 16 mm (5/8 in) DH-2 steel

 Frame, articulated with safety lock

 Fuel tank, 305 L (80.6 gal)

 Ground level engine shutdown

 Link bar, 7 position

 Moldboard, 3658 mm × 610 mm × 22 mm (12 ft × 24 in × 7/8 in) blade with hydraulic sideshift and tip

 S·O·S ports, engine, hydraulic, transmission and cooling

 Toolbox with padlock

 Vandalism protection - including cap locks for hydraulic tank, radiator access cover, fuel tank, engine and transmission oil check/fill and lockable battery boxes.

Bumper, rear

 Alternator, 95 ampere, sealed

 Backup alarm, reversing lights

 Batteries, maintenance free 750 CCA

 Electrical system, 24 volt

 Horn, electric

 Lights, stop and tail

 Motor, starting

 Product Link Ready

 Working lights

 Accelerator

 Control console, adjustable

 Gauge cluster (includes voltmeter, articulation, engine coolant temperature, air brake pressure and fuel level)

 Guard rails, operator station

 Hydraulic controls, load sensing (right/left blade lift, circle drive, centershift, sideshift, blade tip, front wheel lean and articulation)

 Indicator lights (includes high beam, LH and RH turn, low engine oil pressure, throttle lock, check engine, transmission filter bypass and check, centershift pin, brake air pressure, parking brake engaged, AccuGrade, auto shift)

 Key start/stop switch

 Meter, hour

 Power steering, hydraulic

 Seat, vinyl-covered static

 Seat belt

 Steering wheel, tilt, adjustable

 Storage area, cooler/lunch box

 Throttle, electronic control

 Air cleaner, dry type radial seal with service indicator and automatic dust ejector

 Air to air after cooler (ATAAC)

 Blower fan

 Brakes, oil disc, four-wheel air actuated

 Differential with lock/unlock

 Engine, Cat C7 with ACERT technology, diesel with automatic engine derate and idle control. Meets U.S. EPA Tier 2 and EU Stage II emission standards.

 Fuel water separator

 Muffler, under hood

 Parking brake, multi-disc, sealed and oil cooled

 Prescreener

 Priming pump, fuel, resiliently mounted

 Sediment drain, fuel tank

 Tandem drive

 Transmission, 8 speed forward and 6 speed reverse, power shift, direct drive with electronic shift control and overspeed protection

 VHP (Variable Horsepower)

 Bumper, rear

 CD ROM Parts Book

 Circle drive slip clutch

 Cutting edges, 152 mm × 16 mm (6 in × 5/8 in) curved DH-2 steel

 Doors, Engine compartment

 Drawbar, 6 shoes with replaceable nylon composite wear strips

 Endbits, 16 mm (5/8 in) DH-2 steel

 Frame, articulated with safety lock

 Fuel tank, 305 L (80.6 gal)

 Ground level engine shutdown

 Link bar, 7 position

 Moldboard, 3658 mm × 610 mm × 22 mm (12 ft × 24 in × 7/8 in) blade with hydraulic sideshift and tip

 S·O·S ports, engine, hydraulic, transmission and cooling

 Toolbox with padlock

 Vandalism protection - including cap locks for hydraulic tank, radiator access cover, fuel tank, engine and transmission oil check/fill and lockable battery boxes.

 A partial allowance for tires on 229 mm (9 in) single piece rims is included in the base machine price and weight. A tire MUST be selected from the Mandatory Attachments section.

 Extended Life Coolant to -35° C (-30° F)

CD ROM Parts Book

 Alternator, 95 ampere, sealed

 Backup alarm, reversing lights

 Batteries, maintenance free 750 CCA

 Electrical system, 24 volt

 Horn, electric

 Lights, stop and tail

 Motor, starting

 Product Link Ready

 Working lights

 Accelerator

 Control console, adjustable

 Gauge cluster (includes voltmeter, articulation, engine coolant temperature, air brake pressure and fuel level)

 Guard rails, operator station

 Hydraulic controls, load sensing (right/left blade lift, circle drive, centershift, sideshift, blade tip, front wheel lean and articulation)

 Indicator lights (includes high beam, LH and RH turn, low engine oil pressure, throttle lock, check engine, transmission filter bypass and check, centershift pin, brake air pressure, parking brake engaged, AccuGrade, auto shift)

 Key start/stop switch

 Meter, hour

 Power steering, hydraulic

 Seat, vinyl-covered static

 Seat belt

 Steering wheel, tilt, adjustable

 Storage area, cooler/lunch box

 Throttle, electronic control

 Air cleaner, dry type radial seal with service indicator and automatic dust ejector

 Air to air after cooler (ATAAC)

 Blower fan

 Brakes, oil disc, four-wheel air actuated

 Differential with lock/unlock

 Engine, Cat C7 with ACERT technology, diesel with automatic engine derate and idle control. Meets U.S. EPA Tier 2 and EU Stage II emission standards.

 Fuel water separator

 Muffler, under hood

 Parking brake, multi-disc, sealed and oil cooled

 Prescreener

 Priming pump, fuel, resiliently mounted

 Sediment drain, fuel tank

 Tandem drive

 Transmission, 8 speed forward and 6 speed reverse, power shift, direct drive with electronic shift control and overspeed protection

 VHP (Variable Horsepower)

 Bumper, rear

 CD ROM Parts Book

 Circle drive slip clutch

 Cutting edges, 152 mm × 16 mm (6 in × 5/8 in) curved DH-2 steel

 Doors, Engine compartment

 Drawbar, 6 shoes with replaceable nylon composite wear strips

 Endbits, 16 mm (5/8 in) DH-2 steel

 Frame, articulated with safety lock

 Fuel tank, 305 L (80.6 gal)

 Ground level engine shutdown

 Link bar, 7 position

 Moldboard, 3658 mm × 610 mm × 22 mm (12 ft × 24 in × 7/8 in) blade with hydraulic sideshift and tip

 S·O·S ports, engine, hydraulic, transmission and cooling

 Toolbox with padlock

 Vandalism protection - including cap locks for hydraulic tank, radiator access cover, fuel tank, engine and transmission oil check/fill and lockable battery boxes.

 A partial allowance for tires on 229 mm (9 in) single piece rims is included in the base machine price and weight. A tire MUST be selected from the Mandatory Attachments section.

 Extended Life Coolant to -35° C (-30° F)

Circle drive slip clutch

 Alternator, 95 ampere, sealed

 Backup alarm, reversing lights

 Batteries, maintenance free 750 CCA

 Electrical system, 24 volt

 Horn, electric

 Lights, stop and tail

 Motor, starting

 Product Link Ready

 Working lights

 Accelerator

 Control console, adjustable

 Gauge cluster (includes voltmeter, articulation, engine coolant temperature, air brake pressure and fuel level)

 Guard rails, operator station

 Hydraulic controls, load sensing (right/left blade lift, circle drive, centershift, sideshift, blade tip, front wheel lean and articulation)

 Indicator lights (includes high beam, LH and RH turn, low engine oil pressure, throttle lock, check engine, transmission filter bypass and check, centershift pin, brake air pressure, parking brake engaged, AccuGrade, auto shift)

 Key start/stop switch

 Meter, hour

 Power steering, hydraulic

 Seat, vinyl-covered static

 Seat belt

 Steering wheel, tilt, adjustable

 Storage area, cooler/lunch box

 Throttle, electronic control

 Air cleaner, dry type radial seal with service indicator and automatic dust ejector

 Air to air after cooler (ATAAC)

 Blower fan

 Brakes, oil disc, four-wheel air actuated

 Differential with lock/unlock

 Engine, Cat C7 with ACERT technology, diesel with automatic engine derate and idle control. Meets U.S. EPA Tier 2 and EU Stage II emission standards.

 Fuel water separator

 Muffler, under hood

 Parking brake, multi-disc, sealed and oil cooled

 Prescreener

 Priming pump, fuel, resiliently mounted

 Sediment drain, fuel tank

 Tandem drive

 Transmission, 8 speed forward and 6 speed reverse, power shift, direct drive with electronic shift control and overspeed protection

 VHP (Variable Horsepower)

 Bumper, rear

 CD ROM Parts Book

 Circle drive slip clutch

 Cutting edges, 152 mm × 16 mm (6 in × 5/8 in) curved DH-2 steel

 Doors, Engine compartment

 Drawbar, 6 shoes with replaceable nylon composite wear strips

 Endbits, 16 mm (5/8 in) DH-2 steel

 Frame, articulated with safety lock

 Fuel tank, 305 L (80.6 gal)

 Ground level engine shutdown

 Link bar, 7 position

 Moldboard, 3658 mm × 610 mm × 22 mm (12 ft × 24 in × 7/8 in) blade with hydraulic sideshift and tip

 S·O·S ports, engine, hydraulic, transmission and cooling

 Toolbox with padlock

 Vandalism protection - including cap locks for hydraulic tank, radiator access cover, fuel tank, engine and transmission oil check/fill and lockable battery boxes.

 A partial allowance for tires on 229 mm (9 in) single piece rims is included in the base machine price and weight. A tire MUST be selected from the Mandatory Attachments section.

 Extended Life Coolant to -35° C (-30° F)

Cutting edges, 152 mm × 16 mm (6 in × 5/8 in) curved DH-2 steel

 Alternator, 95 ampere, sealed

 Backup alarm, reversing lights

 Batteries, maintenance free 750 CCA

 Electrical system, 24 volt

 Horn, electric

 Lights, stop and tail

 Motor, starting

 Product Link Ready

 Working lights

 Accelerator

 Control console, adjustable

 Gauge cluster (includes voltmeter, articulation, engine coolant temperature, air brake pressure and fuel level)

 Guard rails, operator station

 Hydraulic controls, load sensing (right/left blade lift, circle drive, centershift, sideshift, blade tip, front wheel lean and articulation)

 Indicator lights (includes high beam, LH and RH turn, low engine oil pressure, throttle lock, check engine, transmission filter bypass and check, centershift pin, brake air pressure, parking brake engaged, AccuGrade, auto shift)

 Key start/stop switch

 Meter, hour

 Power steering, hydraulic

 Seat, vinyl-covered static

 Seat belt

 Steering wheel, tilt, adjustable

 Storage area, cooler/lunch box

 Throttle, electronic control

 Air cleaner, dry type radial seal with service indicator and automatic dust ejector

 Air to air after cooler (ATAAC)

 Blower fan

 Brakes, oil disc, four-wheel air actuated

 Differential with lock/unlock

 Engine, Cat C7 with ACERT technology, diesel with automatic engine derate and idle control. Meets U.S. EPA Tier 2 and EU Stage II emission standards.

 Fuel water separator

 Muffler, under hood

 Parking brake, multi-disc, sealed and oil cooled

 Prescreener

 Priming pump, fuel, resiliently mounted

 Sediment drain, fuel tank

 Tandem drive

 Transmission, 8 speed forward and 6 speed reverse, power shift, direct drive with electronic shift control and overspeed protection

 VHP (Variable Horsepower)

 Bumper, rear

 CD ROM Parts Book

 Circle drive slip clutch

 Cutting edges, 152 mm × 16 mm (6 in × 5/8 in) curved DH-2 steel

 Doors, Engine compartment

 Drawbar, 6 shoes with replaceable nylon composite wear strips

 Endbits, 16 mm (5/8 in) DH-2 steel

 Frame, articulated with safety lock

 Fuel tank, 305 L (80.6 gal)

 Ground level engine shutdown

 Link bar, 7 position

 Moldboard, 3658 mm × 610 mm × 22 mm (12 ft × 24 in × 7/8 in) blade with hydraulic sideshift and tip

 S·O·S ports, engine, hydraulic, transmission and cooling

 Toolbox with padlock

 Vandalism protection - including cap locks for hydraulic tank, radiator access cover, fuel tank, engine and transmission oil check/fill and lockable battery boxes.

 A partial allowance for tires on 229 mm (9 in) single piece rims is included in the base machine price and weight. A tire MUST be selected from the Mandatory Attachments section.

 Extended Life Coolant to -35° C (-30° F)

Doors, Engine compartment

 Alternator, 95 ampere, sealed

 Backup alarm, reversing lights

 Batteries, maintenance free 750 CCA

 Electrical system, 24 volt

 Horn, electric

 Lights, stop and tail

 Motor, starting

 Product Link Ready

 Working lights

 Accelerator

 Control console, adjustable

 Gauge cluster (includes voltmeter, articulation, engine coolant temperature, air brake pressure and fuel level)

 Guard rails, operator station

 Hydraulic controls, load sensing (right/left blade lift, circle drive, centershift, sideshift, blade tip, front wheel lean and articulation)

 Indicator lights (includes high beam, LH and RH turn, low engine oil pressure, throttle lock, check engine, transmission filter bypass and check, centershift pin, brake air pressure, parking brake engaged, AccuGrade, auto shift)

 Key start/stop switch

 Meter, hour

 Power steering, hydraulic

 Seat, vinyl-covered static

 Seat belt

 Steering wheel, tilt, adjustable

 Storage area, cooler/lunch box

 Throttle, electronic control

 Air cleaner, dry type radial seal with service indicator and automatic dust ejector

 Air to air after cooler (ATAAC)

 Blower fan

 Brakes, oil disc, four-wheel air actuated

 Differential with lock/unlock

 Engine, Cat C7 with ACERT technology, diesel with automatic engine derate and idle control. Meets U.S. EPA Tier 2 and EU Stage II emission standards.

 Fuel water separator

 Muffler, under hood

 Parking brake, multi-disc, sealed and oil cooled

 Prescreener

 Priming pump, fuel, resiliently mounted

 Sediment drain, fuel tank

 Tandem drive

 Transmission, 8 speed forward and 6 speed reverse, power shift, direct drive with electronic shift control and overspeed protection

 VHP (Variable Horsepower)

 Bumper, rear

 CD ROM Parts Book

 Circle drive slip clutch

 Cutting edges, 152 mm × 16 mm (6 in × 5/8 in) curved DH-2 steel

 Doors, Engine compartment

 Drawbar, 6 shoes with replaceable nylon composite wear strips

 Endbits, 16 mm (5/8 in) DH-2 steel

 Frame, articulated with safety lock

 Fuel tank, 305 L (80.6 gal)

 Ground level engine shutdown

 Link bar, 7 position

 Moldboard, 3658 mm × 610 mm × 22 mm (12 ft × 24 in × 7/8 in) blade with hydraulic sideshift and tip

 S·O·S ports, engine, hydraulic, transmission and cooling

 Toolbox with padlock

 Vandalism protection - including cap locks for hydraulic tank, radiator access cover, fuel tank, engine and transmission oil check/fill and lockable battery boxes.

 A partial allowance for tires on 229 mm (9 in) single piece rims is included in the base machine price and weight. A tire MUST be selected from the Mandatory Attachments section.

 Extended Life Coolant to -35° C (-30° F)

Drawbar, 6 shoes with replaceable nylon composite wear strips

 Alternator, 95 ampere, sealed

 Backup alarm, reversing lights

 Batteries, maintenance free 750 CCA

 Electrical system, 24 volt

 Horn, electric

 Lights, stop and tail

 Motor, starting

 Product Link Ready

 Working lights

 Accelerator

 Control console, adjustable

 Gauge cluster (includes voltmeter, articulation, engine coolant temperature, air brake pressure and fuel level)

 Guard rails, operator station

 Hydraulic controls, load sensing (right/left blade lift, circle drive, centershift, sideshift, blade tip, front wheel lean and articulation)

 Indicator lights (includes high beam, LH and RH turn, low engine oil pressure, throttle lock, check engine, transmission filter bypass and check, centershift pin, brake air pressure, parking brake engaged, AccuGrade, auto shift)

 Key start/stop switch

 Meter, hour

 Power steering, hydraulic

 Seat, vinyl-covered static

 Seat belt

 Steering wheel, tilt, adjustable

 Storage area, cooler/lunch box

 Throttle, electronic control

 Air cleaner, dry type radial seal with service indicator and automatic dust ejector

 Air to air after cooler (ATAAC)

 Blower fan

 Brakes, oil disc, four-wheel air actuated

 Differential with lock/unlock

 Engine, Cat C7 with ACERT technology, diesel with automatic engine derate and idle control. Meets U.S. EPA Tier 2 and EU Stage II emission standards.

 Fuel water separator

 Muffler, under hood

 Parking brake, multi-disc, sealed and oil cooled

 Prescreener

 Priming pump, fuel, resiliently mounted

 Sediment drain, fuel tank

 Tandem drive

 Transmission, 8 speed forward and 6 speed reverse, power shift, direct drive with electronic shift control and overspeed protection

 VHP (Variable Horsepower)

 Bumper, rear

 CD ROM Parts Book

 Circle drive slip clutch

 Cutting edges, 152 mm × 16 mm (6 in × 5/8 in) curved DH-2 steel

 Doors, Engine compartment

 Drawbar, 6 shoes with replaceable nylon composite wear strips

 Endbits, 16 mm (5/8 in) DH-2 steel

 Frame, articulated with safety lock

 Fuel tank, 305 L (80.6 gal)

 Ground level engine shutdown

 Link bar, 7 position

 Moldboard, 3658 mm × 610 mm × 22 mm (12 ft × 24 in × 7/8 in) blade with hydraulic sideshift and tip

 S·O·S ports, engine, hydraulic, transmission and cooling

 Toolbox with padlock

 Vandalism protection - including cap locks for hydraulic tank, radiator access cover, fuel tank, engine and transmission oil check/fill and lockable battery boxes.

 A partial allowance for tires on 229 mm (9 in) single piece rims is included in the base machine price and weight. A tire MUST be selected from the Mandatory Attachments section.

 Extended Life Coolant to -35° C (-30° F)

Endbits, 16 mm (5/8 in) DH-2 steel

 Alternator, 95 ampere, sealed

 Backup alarm, reversing lights

 Batteries, maintenance free 750 CCA

 Electrical system, 24 volt

 Horn, electric

 Lights, stop and tail

 Motor, starting

 Product Link Ready

 Working lights

 Accelerator

 Control console, adjustable

 Gauge cluster (includes voltmeter, articulation, engine coolant temperature, air brake pressure and fuel level)

 Guard rails, operator station

 Hydraulic controls, load sensing (right/left blade lift, circle drive, centershift, sideshift, blade tip, front wheel lean and articulation)

 Indicator lights (includes high beam, LH and RH turn, low engine oil pressure, throttle lock, check engine, transmission filter bypass and check, centershift pin, brake air pressure, parking brake engaged, AccuGrade, auto shift)

 Key start/stop switch

 Meter, hour

 Power steering, hydraulic

 Seat, vinyl-covered static

 Seat belt

 Steering wheel, tilt, adjustable

 Storage area, cooler/lunch box

 Throttle, electronic control

 Air cleaner, dry type radial seal with service indicator and automatic dust ejector

 Air to air after cooler (ATAAC)

 Blower fan

 Brakes, oil disc, four-wheel air actuated

 Differential with lock/unlock

 Engine, Cat C7 with ACERT technology, diesel with automatic engine derate and idle control. Meets U.S. EPA Tier 2 and EU Stage II emission standards.

 Fuel water separator

 Muffler, under hood

 Parking brake, multi-disc, sealed and oil cooled

 Prescreener

 Priming pump, fuel, resiliently mounted

 Sediment drain, fuel tank

 Tandem drive

 Transmission, 8 speed forward and 6 speed reverse, power shift, direct drive with electronic shift control and overspeed protection

 VHP (Variable Horsepower)

 Bumper, rear

 CD ROM Parts Book

 Circle drive slip clutch

 Cutting edges, 152 mm × 16 mm (6 in × 5/8 in) curved DH-2 steel

 Doors, Engine compartment

 Drawbar, 6 shoes with replaceable nylon composite wear strips

 Endbits, 16 mm (5/8 in) DH-2 steel

 Frame, articulated with safety lock

 Fuel tank, 305 L (80.6 gal)

 Ground level engine shutdown

 Link bar, 7 position

 Moldboard, 3658 mm × 610 mm × 22 mm (12 ft × 24 in × 7/8 in) blade with hydraulic sideshift and tip

 S·O·S ports, engine, hydraulic, transmission and cooling

 Toolbox with padlock

 Vandalism protection - including cap locks for hydraulic tank, radiator access cover, fuel tank, engine and transmission oil check/fill and lockable battery boxes.

 A partial allowance for tires on 229 mm (9 in) single piece rims is included in the base machine price and weight. A tire MUST be selected from the Mandatory Attachments section.

 Extended Life Coolant to -35° C (-30° F)

Frame, articulated with safety lock

 Alternator, 95 ampere, sealed

 Backup alarm, reversing lights

 Batteries, maintenance free 750 CCA

 Electrical system, 24 volt

 Horn, electric

 Lights, stop and tail

 Motor, starting

 Product Link Ready

 Working lights

 Accelerator

 Control console, adjustable

 Gauge cluster (includes voltmeter, articulation, engine coolant temperature, air brake pressure and fuel level)

 Guard rails, operator station

 Hydraulic controls, load sensing (right/left blade lift, circle drive, centershift, sideshift, blade tip, front wheel lean and articulation)

 Indicator lights (includes high beam, LH and RH turn, low engine oil pressure, throttle lock, check engine, transmission filter bypass and check, centershift pin, brake air pressure, parking brake engaged, AccuGrade, auto shift)

 Key start/stop switch

 Meter, hour

 Power steering, hydraulic

 Seat, vinyl-covered static

 Seat belt

 Steering wheel, tilt, adjustable

 Storage area, cooler/lunch box

 Throttle, electronic control

 Air cleaner, dry type radial seal with service indicator and automatic dust ejector

 Air to air after cooler (ATAAC)

 Blower fan

 Brakes, oil disc, four-wheel air actuated

 Differential with lock/unlock

 Engine, Cat C7 with ACERT technology, diesel with automatic engine derate and idle control. Meets U.S. EPA Tier 2 and EU Stage II emission standards.

 Fuel water separator

 Muffler, under hood

 Parking brake, multi-disc, sealed and oil cooled

 Prescreener

 Priming pump, fuel, resiliently mounted

 Sediment drain, fuel tank

 Tandem drive

 Transmission, 8 speed forward and 6 speed reverse, power shift, direct drive with electronic shift control and overspeed protection

 VHP (Variable Horsepower)

 Bumper, rear

 CD ROM Parts Book

 Circle drive slip clutch

 Cutting edges, 152 mm × 16 mm (6 in × 5/8 in) curved DH-2 steel

 Doors, Engine compartment

 Drawbar, 6 shoes with replaceable nylon composite wear strips

 Endbits, 16 mm (5/8 in) DH-2 steel

 Frame, articulated with safety lock

 Fuel tank, 305 L (80.6 gal)

 Ground level engine shutdown

 Link bar, 7 position

 Moldboard, 3658 mm × 610 mm × 22 mm (12 ft × 24 in × 7/8 in) blade with hydraulic sideshift and tip

 S·O·S ports, engine, hydraulic, transmission and cooling

 Toolbox with padlock

 Vandalism protection - including cap locks for hydraulic tank, radiator access cover, fuel tank, engine and transmission oil check/fill and lockable battery boxes.

 A partial allowance for tires on 229 mm (9 in) single piece rims is included in the base machine price and weight. A tire MUST be selected from the Mandatory Attachments section.

 Extended Life Coolant to -35° C (-30° F)

Fuel tank, 305 L (80.6 gal)

 Alternator, 95 ampere, sealed

 Backup alarm, reversing lights

 Batteries, maintenance free 750 CCA

 Electrical system, 24 volt

 Horn, electric

 Lights, stop and tail

 Motor, starting

 Product Link Ready

 Working lights

 Accelerator

 Control console, adjustable

 Gauge cluster (includes voltmeter, articulation, engine coolant temperature, air brake pressure and fuel level)

 Guard rails, operator station

 Hydraulic controls, load sensing (right/left blade lift, circle drive, centershift, sideshift, blade tip, front wheel lean and articulation)

 Indicator lights (includes high beam, LH and RH turn, low engine oil pressure, throttle lock, check engine, transmission filter bypass and check, centershift pin, brake air pressure, parking brake engaged, AccuGrade, auto shift)

 Key start/stop switch

 Meter, hour

 Power steering, hydraulic

 Seat, vinyl-covered static

 Seat belt

 Steering wheel, tilt, adjustable

 Storage area, cooler/lunch box

 Throttle, electronic control

 Air cleaner, dry type radial seal with service indicator and automatic dust ejector

 Air to air after cooler (ATAAC)

 Blower fan

 Brakes, oil disc, four-wheel air actuated

 Differential with lock/unlock

 Engine, Cat C7 with ACERT technology, diesel with automatic engine derate and idle control. Meets U.S. EPA Tier 2 and EU Stage II emission standards.

 Fuel water separator

 Muffler, under hood

 Parking brake, multi-disc, sealed and oil cooled

 Prescreener

 Priming pump, fuel, resiliently mounted

 Sediment drain, fuel tank

 Tandem drive

 Transmission, 8 speed forward and 6 speed reverse, power shift, direct drive with electronic shift control and overspeed protection

 VHP (Variable Horsepower)

 Bumper, rear

 CD ROM Parts Book

 Circle drive slip clutch

 Cutting edges, 152 mm × 16 mm (6 in × 5/8 in) curved DH-2 steel

 Doors, Engine compartment

 Drawbar, 6 shoes with replaceable nylon composite wear strips

 Endbits, 16 mm (5/8 in) DH-2 steel

 Frame, articulated with safety lock

 Fuel tank, 305 L (80.6 gal)

 Ground level engine shutdown

 Link bar, 7 position

 Moldboard, 3658 mm × 610 mm × 22 mm (12 ft × 24 in × 7/8 in) blade with hydraulic sideshift and tip

 S·O·S ports, engine, hydraulic, transmission and cooling

 Toolbox with padlock

 Vandalism protection - including cap locks for hydraulic tank, radiator access cover, fuel tank, engine and transmission oil check/fill and lockable battery boxes.

 A partial allowance for tires on 229 mm (9 in) single piece rims is included in the base machine price and weight. A tire MUST be selected from the Mandatory Attachments section.

 Extended Life Coolant to -35° C (-30° F)

Ground level engine shutdown

 Alternator, 95 ampere, sealed

 Backup alarm, reversing lights

 Batteries, maintenance free 750 CCA

 Electrical system, 24 volt

 Horn, electric

 Lights, stop and tail

 Motor, starting

 Product Link Ready

 Working lights

 Accelerator

 Control console, adjustable

 Gauge cluster (includes voltmeter, articulation, engine coolant temperature, air brake pressure and fuel level)

 Guard rails, operator station

 Hydraulic controls, load sensing (right/left blade lift, circle drive, centershift, sideshift, blade tip, front wheel lean and articulation)

 Indicator lights (includes high beam, LH and RH turn, low engine oil pressure, throttle lock, check engine, transmission filter bypass and check, centershift pin, brake air pressure, parking brake engaged, AccuGrade, auto shift)

 Key start/stop switch

 Meter, hour

 Power steering, hydraulic

 Seat, vinyl-covered static

 Seat belt

 Steering wheel, tilt, adjustable

 Storage area, cooler/lunch box

 Throttle, electronic control

 Air cleaner, dry type radial seal with service indicator and automatic dust ejector

 Air to air after cooler (ATAAC)

 Blower fan

 Brakes, oil disc, four-wheel air actuated

 Differential with lock/unlock

 Engine, Cat C7 with ACERT technology, diesel with automatic engine derate and idle control. Meets U.S. EPA Tier 2 and EU Stage II emission standards.

 Fuel water separator

 Muffler, under hood

 Parking brake, multi-disc, sealed and oil cooled

 Prescreener

 Priming pump, fuel, resiliently mounted

 Sediment drain, fuel tank

 Tandem drive

 Transmission, 8 speed forward and 6 speed reverse, power shift, direct drive with electronic shift control and overspeed protection

 VHP (Variable Horsepower)

 Bumper, rear

 CD ROM Parts Book

 Circle drive slip clutch

 Cutting edges, 152 mm × 16 mm (6 in × 5/8 in) curved DH-2 steel

 Doors, Engine compartment

 Drawbar, 6 shoes with replaceable nylon composite wear strips

 Endbits, 16 mm (5/8 in) DH-2 steel

 Frame, articulated with safety lock

 Fuel tank, 305 L (80.6 gal)

 Ground level engine shutdown

 Link bar, 7 position

 Moldboard, 3658 mm × 610 mm × 22 mm (12 ft × 24 in × 7/8 in) blade with hydraulic sideshift and tip

 S·O·S ports, engine, hydraulic, transmission and cooling

 Toolbox with padlock

 Vandalism protection - including cap locks for hydraulic tank, radiator access cover, fuel tank, engine and transmission oil check/fill and lockable battery boxes.

 A partial allowance for tires on 229 mm (9 in) single piece rims is included in the base machine price and weight. A tire MUST be selected from the Mandatory Attachments section.

 Extended Life Coolant to -35° C (-30° F)

Link bar, 7 position

 Alternator, 95 ampere, sealed

 Backup alarm, reversing lights

 Batteries, maintenance free 750 CCA

 Electrical system, 24 volt

 Horn, electric

 Lights, stop and tail

 Motor, starting

 Product Link Ready

 Working lights

 Accelerator

 Control console, adjustable

 Gauge cluster (includes voltmeter, articulation, engine coolant temperature, air brake pressure and fuel level)

 Guard rails, operator station

 Hydraulic controls, load sensing (right/left blade lift, circle drive, centershift, sideshift, blade tip, front wheel lean and articulation)

 Indicator lights (includes high beam, LH and RH turn, low engine oil pressure, throttle lock, check engine, transmission filter bypass and check, centershift pin, brake air pressure, parking brake engaged, AccuGrade, auto shift)

 Key start/stop switch

 Meter, hour

 Power steering, hydraulic

 Seat, vinyl-covered static

 Seat belt

 Steering wheel, tilt, adjustable

 Storage area, cooler/lunch box

 Throttle, electronic control

 Air cleaner, dry type radial seal with service indicator and automatic dust ejector

 Air to air after cooler (ATAAC)

 Blower fan

 Brakes, oil disc, four-wheel air actuated

 Differential with lock/unlock

 Engine, Cat C7 with ACERT technology, diesel with automatic engine derate and idle control. Meets U.S. EPA Tier 2 and EU Stage II emission standards.

 Fuel water separator

 Muffler, under hood

 Parking brake, multi-disc, sealed and oil cooled

 Prescreener

 Priming pump, fuel, resiliently mounted

 Sediment drain, fuel tank

 Tandem drive

 Transmission, 8 speed forward and 6 speed reverse, power shift, direct drive with electronic shift control and overspeed protection

 VHP (Variable Horsepower)

 Bumper, rear

 CD ROM Parts Book

 Circle drive slip clutch

 Cutting edges, 152 mm × 16 mm (6 in × 5/8 in) curved DH-2 steel

 Doors, Engine compartment

 Drawbar, 6 shoes with replaceable nylon composite wear strips

 Endbits, 16 mm (5/8 in) DH-2 steel

 Frame, articulated with safety lock

 Fuel tank, 305 L (80.6 gal)

 Ground level engine shutdown

 Link bar, 7 position

 Moldboard, 3658 mm × 610 mm × 22 mm (12 ft × 24 in × 7/8 in) blade with hydraulic sideshift and tip

 S·O·S ports, engine, hydraulic, transmission and cooling

 Toolbox with padlock

 Vandalism protection - including cap locks for hydraulic tank, radiator access cover, fuel tank, engine and transmission oil check/fill and lockable battery boxes.

 A partial allowance for tires on 229 mm (9 in) single piece rims is included in the base machine price and weight. A tire MUST be selected from the Mandatory Attachments section.

 Extended Life Coolant to -35° C (-30° F)

Moldboard, 3658 mm × 610 mm × 22 mm (12 ft × 24 in × 7/8 in) blade with hydraulic sideshift and tip

 Alternator, 95 ampere, sealed

 Backup alarm, reversing lights

 Batteries, maintenance free 750 CCA

 Electrical system, 24 volt

 Horn, electric

 Lights, stop and tail

 Motor, starting

 Product Link Ready

 Working lights

 Accelerator

 Control console, adjustable

 Gauge cluster (includes voltmeter, articulation, engine coolant temperature, air brake pressure and fuel level)

 Guard rails, operator station

 Hydraulic controls, load sensing (right/left blade lift, circle drive, centershift, sideshift, blade tip, front wheel lean and articulation)

 Indicator lights (includes high beam, LH and RH turn, low engine oil pressure, throttle lock, check engine, transmission filter bypass and check, centershift pin, brake air pressure, parking brake engaged, AccuGrade, auto shift)

 Key start/stop switch

 Meter, hour

 Power steering, hydraulic

 Seat, vinyl-covered static

 Seat belt

 Steering wheel, tilt, adjustable

 Storage area, cooler/lunch box

 Throttle, electronic control

 Air cleaner, dry type radial seal with service indicator and automatic dust ejector

 Air to air after cooler (ATAAC)

 Blower fan

 Brakes, oil disc, four-wheel air actuated

 Differential with lock/unlock

 Engine, Cat C7 with ACERT technology, diesel with automatic engine derate and idle control. Meets U.S. EPA Tier 2 and EU Stage II emission standards.

 Fuel water separator

 Muffler, under hood

 Parking brake, multi-disc, sealed and oil cooled

 Prescreener

 Priming pump, fuel, resiliently mounted

 Sediment drain, fuel tank

 Tandem drive

 Transmission, 8 speed forward and 6 speed reverse, power shift, direct drive with electronic shift control and overspeed protection

 VHP (Variable Horsepower)

 Bumper, rear

 CD ROM Parts Book

 Circle drive slip clutch

 Cutting edges, 152 mm × 16 mm (6 in × 5/8 in) curved DH-2 steel

 Doors, Engine compartment

 Drawbar, 6 shoes with replaceable nylon composite wear strips

 Endbits, 16 mm (5/8 in) DH-2 steel

 Frame, articulated with safety lock

 Fuel tank, 305 L (80.6 gal)

 Ground level engine shutdown

 Link bar, 7 position

 Moldboard, 3658 mm × 610 mm × 22 mm (12 ft × 24 in × 7/8 in) blade with hydraulic sideshift and tip

 S·O·S ports, engine, hydraulic, transmission and cooling

 Toolbox with padlock

 Vandalism protection - including cap locks for hydraulic tank, radiator access cover, fuel tank, engine and transmission oil check/fill and lockable battery boxes.

 A partial allowance for tires on 229 mm (9 in) single piece rims is included in the base machine price and weight. A tire MUST be selected from the Mandatory Attachments section.

 Extended Life Coolant to -35° C (-30° F)

S·O·S ports, engine, hydraulic, transmission and cooling

 Alternator, 95 ampere, sealed

 Backup alarm, reversing lights

 Batteries, maintenance free 750 CCA

 Electrical system, 24 volt

 Horn, electric

 Lights, stop and tail

 Motor, starting

 Product Link Ready

 Working lights

 Accelerator

 Control console, adjustable

 Gauge cluster (includes voltmeter, articulation, engine coolant temperature, air brake pressure and fuel level)

 Guard rails, operator station

 Hydraulic controls, load sensing (right/left blade lift, circle drive, centershift, sideshift, blade tip, front wheel lean and articulation)

 Indicator lights (includes high beam, LH and RH turn, low engine oil pressure, throttle lock, check engine, transmission filter bypass and check, centershift pin, brake air pressure, parking brake engaged, AccuGrade, auto shift)

 Key start/stop switch

 Meter, hour

 Power steering, hydraulic

 Seat, vinyl-covered static

 Seat belt

 Steering wheel, tilt, adjustable

 Storage area, cooler/lunch box

 Throttle, electronic control

 Air cleaner, dry type radial seal with service indicator and automatic dust ejector

 Air to air after cooler (ATAAC)

 Blower fan

 Brakes, oil disc, four-wheel air actuated

 Differential with lock/unlock

 Engine, Cat C7 with ACERT technology, diesel with automatic engine derate and idle control. Meets U.S. EPA Tier 2 and EU Stage II emission standards.

 Fuel water separator

 Muffler, under hood

 Parking brake, multi-disc, sealed and oil cooled

 Prescreener

 Priming pump, fuel, resiliently mounted

 Sediment drain, fuel tank

 Tandem drive

 Transmission, 8 speed forward and 6 speed reverse, power shift, direct drive with electronic shift control and overspeed protection

 VHP (Variable Horsepower)

 Bumper, rear

 CD ROM Parts Book

 Circle drive slip clutch

 Cutting edges, 152 mm × 16 mm (6 in × 5/8 in) curved DH-2 steel

 Doors, Engine compartment

 Drawbar, 6 shoes with replaceable nylon composite wear strips

 Endbits, 16 mm (5/8 in) DH-2 steel

 Frame, articulated with safety lock

 Fuel tank, 305 L (80.6 gal)

 Ground level engine shutdown

 Link bar, 7 position

 Moldboard, 3658 mm × 610 mm × 22 mm (12 ft × 24 in × 7/8 in) blade with hydraulic sideshift and tip

 S·O·S ports, engine, hydraulic, transmission and cooling

 Toolbox with padlock

 Vandalism protection - including cap locks for hydraulic tank, radiator access cover, fuel tank, engine and transmission oil check/fill and lockable battery boxes.

 A partial allowance for tires on 229 mm (9 in) single piece rims is included in the base machine price and weight. A tire MUST be selected from the Mandatory Attachments section.

 Extended Life Coolant to -35° C (-30° F)

Toolbox with padlock

 Alternator, 95 ampere, sealed

 Backup alarm, reversing lights

 Batteries, maintenance free 750 CCA

 Electrical system, 24 volt

 Horn, electric

 Lights, stop and tail

 Motor, starting

 Product Link Ready

 Working lights

 Accelerator

 Control console, adjustable

 Gauge cluster (includes voltmeter, articulation, engine coolant temperature, air brake pressure and fuel level)

 Guard rails, operator station

 Hydraulic controls, load sensing (right/left blade lift, circle drive, centershift, sideshift, blade tip, front wheel lean and articulation)

 Indicator lights (includes high beam, LH and RH turn, low engine oil pressure, throttle lock, check engine, transmission filter bypass and check, centershift pin, brake air pressure, parking brake engaged, AccuGrade, auto shift)

 Key start/stop switch

 Meter, hour

 Power steering, hydraulic

 Seat, vinyl-covered static

 Seat belt

 Steering wheel, tilt, adjustable

 Storage area, cooler/lunch box

 Throttle, electronic control

 Air cleaner, dry type radial seal with service indicator and automatic dust ejector

 Air to air after cooler (ATAAC)

 Blower fan

 Brakes, oil disc, four-wheel air actuated

 Differential with lock/unlock

 Engine, Cat C7 with ACERT technology, diesel with automatic engine derate and idle control. Meets U.S. EPA Tier 2 and EU Stage II emission standards.

 Fuel water separator

 Muffler, under hood

 Parking brake, multi-disc, sealed and oil cooled

 Prescreener

 Priming pump, fuel, resiliently mounted

 Sediment drain, fuel tank

 Tandem drive

 Transmission, 8 speed forward and 6 speed reverse, power shift, direct drive with electronic shift control and overspeed protection

 VHP (Variable Horsepower)

 Bumper, rear

 CD ROM Parts Book

 Circle drive slip clutch

 Cutting edges, 152 mm × 16 mm (6 in × 5/8 in) curved DH-2 steel

 Doors, Engine compartment

 Drawbar, 6 shoes with replaceable nylon composite wear strips

 Endbits, 16 mm (5/8 in) DH-2 steel

 Frame, articulated with safety lock

 Fuel tank, 305 L (80.6 gal)

 Ground level engine shutdown

 Link bar, 7 position

 Moldboard, 3658 mm × 610 mm × 22 mm (12 ft × 24 in × 7/8 in) blade with hydraulic sideshift and tip

 S·O·S ports, engine, hydraulic, transmission and cooling

 Toolbox with padlock

 Vandalism protection - including cap locks for hydraulic tank, radiator access cover, fuel tank, engine and transmission oil check/fill and lockable battery boxes.

 A partial allowance for tires on 229 mm (9 in) single piece rims is included in the base machine price and weight. A tire MUST be selected from the Mandatory Attachments section.

 Extended Life Coolant to -35° C (-30° F)

Vandalism protection - including cap locks for hydraulic tank, radiator access cover, fuel tank, engine and transmission oil check/fill and lockable battery boxes.

 Alternator, 95 ampere, sealed

 Backup alarm, reversing lights

 Batteries, maintenance free 750 CCA

 Electrical system, 24 volt

 Horn, electric

 Lights, stop and tail

 Motor, starting

 Product Link Ready

 Working lights

 Accelerator

 Control console, adjustable

 Gauge cluster (includes voltmeter, articulation, engine coolant temperature, air brake pressure and fuel level)

 Guard rails, operator station

 Hydraulic controls, load sensing (right/left blade lift, circle drive, centershift, sideshift, blade tip, front wheel lean and articulation)

 Indicator lights (includes high beam, LH and RH turn, low engine oil pressure, throttle lock, check engine, transmission filter bypass and check, centershift pin, brake air pressure, parking brake engaged, AccuGrade, auto shift)

 Key start/stop switch

 Meter, hour

 Power steering, hydraulic

 Seat, vinyl-covered static

 Seat belt

 Steering wheel, tilt, adjustable

 Storage area, cooler/lunch box

 Throttle, electronic control

 Air cleaner, dry type radial seal with service indicator and automatic dust ejector

 Air to air after cooler (ATAAC)

 Blower fan

 Brakes, oil disc, four-wheel air actuated

 Differential with lock/unlock

 Engine, Cat C7 with ACERT technology, diesel with automatic engine derate and idle control. Meets U.S. EPA Tier 2 and EU Stage II emission standards.

 Fuel water separator

 Muffler, under hood

 Parking brake, multi-disc, sealed and oil cooled

 Prescreener

 Priming pump, fuel, resiliently mounted

 Sediment drain, fuel tank

 Tandem drive

 Transmission, 8 speed forward and 6 speed reverse, power shift, direct drive with electronic shift control and overspeed protection

 VHP (Variable Horsepower)

 Bumper, rear

 CD ROM Parts Book

 Circle drive slip clutch

 Cutting edges, 152 mm × 16 mm (6 in × 5/8 in) curved DH-2 steel

 Doors, Engine compartment

 Drawbar, 6 shoes with replaceable nylon composite wear strips

 Endbits, 16 mm (5/8 in) DH-2 steel

 Frame, articulated with safety lock

 Fuel tank, 305 L (80.6 gal)

 Ground level engine shutdown

 Link bar, 7 position

 Moldboard, 3658 mm × 610 mm × 22 mm (12 ft × 24 in × 7/8 in) blade with hydraulic sideshift and tip

 S·O·S ports, engine, hydraulic, transmission and cooling

 Toolbox with padlock

 Vandalism protection - including cap locks for hydraulic tank, radiator access cover, fuel tank, engine and transmission oil check/fill and lockable battery boxes.

 A partial allowance for tires on 229 mm (9 in) single piece rims is included in the base machine price and weight. A tire MUST be selected from the Mandatory Attachments section.

 Extended Life Coolant to -35° C (-30° F)

TIRES, RIMS, AND WHEELS

 A partial allowance for tires on 229 mm (9 in) single piece rims is included in the base machine price and weight. A tire MUST be selected from the Mandatory Attachments section.

A partial allowance for tires on 229 mm (9 in) single piece rims is included in the base machine price and weight. A tire MUST be selected from the Mandatory Attachments section.

 Alternator, 95 ampere, sealed

 Backup alarm, reversing lights

 Batteries, maintenance free 750 CCA

 Electrical system, 24 volt

 Horn, electric

 Lights, stop and tail

 Motor, starting

 Product Link Ready

 Working lights

 Accelerator

 Control console, adjustable

 Gauge cluster (includes voltmeter, articulation, engine coolant temperature, air brake pressure and fuel level)

 Guard rails, operator station

 Hydraulic controls, load sensing (right/left blade lift, circle drive, centershift, sideshift, blade tip, front wheel lean and articulation)

 Indicator lights (includes high beam, LH and RH turn, low engine oil pressure, throttle lock, check engine, transmission filter bypass and check, centershift pin, brake air pressure, parking brake engaged, AccuGrade, auto shift)

 Key start/stop switch

 Meter, hour

 Power steering, hydraulic

 Seat, vinyl-covered static

 Seat belt

 Steering wheel, tilt, adjustable

 Storage area, cooler/lunch box

 Throttle, electronic control

 Air cleaner, dry type radial seal with service indicator and automatic dust ejector

 Air to air after cooler (ATAAC)

 Blower fan

 Brakes, oil disc, four-wheel air actuated

 Differential with lock/unlock

 Engine, Cat C7 with ACERT technology, diesel with automatic engine derate and idle control. Meets U.S. EPA Tier 2 and EU Stage II emission standards.

 Fuel water separator

 Muffler, under hood

 Parking brake, multi-disc, sealed and oil cooled

 Prescreener

 Priming pump, fuel, resiliently mounted

 Sediment drain, fuel tank

 Tandem drive

 Transmission, 8 speed forward and 6 speed reverse, power shift, direct drive with electronic shift control and overspeed protection

 VHP (Variable Horsepower)

 Bumper, rear

 CD ROM Parts Book

 Circle drive slip clutch

 Cutting edges, 152 mm × 16 mm (6 in × 5/8 in) curved DH-2 steel

 Doors, Engine compartment

 Drawbar, 6 shoes with replaceable nylon composite wear strips

 Endbits, 16 mm (5/8 in) DH-2 steel

 Frame, articulated with safety lock

 Fuel tank, 305 L (80.6 gal)

 Ground level engine shutdown

 Link bar, 7 position

 Moldboard, 3658 mm × 610 mm × 22 mm (12 ft × 24 in × 7/8 in) blade with hydraulic sideshift and tip

 S·O·S ports, engine, hydraulic, transmission and cooling

 Toolbox with padlock

 Vandalism protection - including cap locks for hydraulic tank, radiator access cover, fuel tank, engine and transmission oil check/fill and lockable battery boxes.

 A partial allowance for tires on 229 mm (9 in) single piece rims is included in the base machine price and weight. A tire MUST be selected from the Mandatory Attachments section.

 Extended Life Coolant to -35° C (-30° F)

ANTIFREEZE

 Extended Life Coolant to -35° C (-30° F)

ELECTRICAL

Alternator, 95 ampere, sealed

Backup alarm, reversing lights

Batteries, maintenance free 750 CCA

Electrical system, 24 volt

Horn, electric

Lights, stop and tail

Motor, starting

Product Link Ready

Working lights

OPERATOR ENVIRONMENT

Accelerator

Control console, adjustable

Gauge cluster (includes voltmeter, articulation, engine coolant temperature, air brake pressure and fuel level)

Guard rails, operator station

Hydraulic controls, load sensing (right/left blade lift, circle drive, centershift, sideshift, blade tip, front wheel lean and articulation)

Indicator lights (includes high beam, LH and RH turn, low engine oil pressure, throttle lock, check engine, transmission filter bypass and check, centershift pin, brake air pressure, parking brake engaged, AccuGrade, auto shift)

Key start/stop switch

Meter, hour

Power steering, hydraulic

Seat, vinyl-covered static

Seat belt

Steering wheel, tilt, adjustable

Storage area, cooler/lunch box

Throttle, electronic control

POWER TRAIN

Air cleaner, dry type radial seal with service indicator and automatic dust ejector

Air to air after cooler (ATAAC)

Blower fan

Brakes, oil disc, four-wheel air actuated

Differential with lock/unlock

Engine, Cat C7 with ACERT technology, diesel with automatic engine derate and idle control. Meets U.S. EPA Tier 2 and EU Stage II emission standards.

Fuel water separator

Muffler, under hood

Parking brake, multi-disc, sealed and oil cooled

Prescreener

Priming pump, fuel, resiliently mounted

Sediment drain, fuel tank

Tandem drive

Transmission, 8 speed forward and 6 speed reverse, power shift, direct drive with electronic shift control and overspeed protection

VHP (Variable Horsepower)

OTHER STANDARD EQUIPMENT

Bumper, rear

CD ROM Parts Book

Circle drive slip clutch

Cutting edges, 152 mm × 16 mm (6 in × 5/8 in) curved DH-2 steel

Doors, Engine compartment

Drawbar, 6 shoes with replaceable nylon composite wear strips

Endbits, 16 mm (5/8 in) DH-2 steel

Frame, articulated with safety lock

Fuel tank, 305 L (80.6 gal)

Ground level engine shutdown

Link bar, 7 position

Moldboard, 3658 mm × 610 mm × 22 mm (12 ft × 24 in × 7/8 in) blade with hydraulic sideshift and tip

S·O·S ports, engine, hydraulic, transmission and cooling

Toolbox with padlock

Vandalism protection - including cap locks for hydraulic tank, radiator access cover, fuel tank, engine and transmission oil check/fill and lockable battery boxes.

TIRES, RIMS, AND WHEELS

A partial allowance for tires on 229 mm (9 in) single piece rims is included in the base machine price and weight. A tire MUST be selected from the Mandatory Attachments section.

ANTIFREEZE

Extended Life Coolant to -35° C (-30° F)

GUARDS

 Guard, transmission

OPERATOR ENVIRONMENT

 Air conditioner with heater

 Heater, cab

 CAB/CANOPY

 Seat, vinyl adjustable

 Seat, cloth, contour

 Fan, defroster, front window

 Fan, defroster, rear window

 Sun shade, rear

 Wiper/washer, rear

 Wipers, intermittent front

 Mirrors, dual inside

 Mirrors, outside mounted

 Power port, 12V accessory

 Radio ready entertainment

 Tachometer/Speedometer

 * Cab weights represent changes to Typically Equipped machine weights.

RIPPER/SCARIFIER

 Ripper/Scarifier, rear mounted

 Scarifier, mid mounted, V-type

LIGHTS

 Bar mounted, low, directional and headlights

 Cab and bar mounted, high, directional, headlights and work lights

POWER TRAIN

 Autoshift

Autoshift

OTHER ATTACHMENTS

 Product Link

 Snow Wing Mounting, frame-ready

 AccuGrade ARO

 Dryer, air

 Push plate, counterweight

 Accumulator, blade lift

 Battery, extreme duty (1,400 CCA)

 Ether, starting aid

 Heater, engine coolant, 220V

Product Link

Snow Wing Mounting, frame-ready

AccuGrade ARO

Dryer, air

Push plate, counterweight

Accumulator, blade lift

Battery, extreme duty (1,400 CCA)

Ether, starting aid

Heater, engine coolant, 220V

HYDRAULICS

 Pump, hydraulic, high capacity

 Hydraulic arrangements with one or more additional hydraulic valves are available for rear ripper, mid-mount scarifier, dozer, snow plow and snow wing.

BLADES, MOLDBOARDS

 Blade, 4267 mm × 610 mm × 22 mm (14' × 24" × 7/8")

 Blade, front

 Cutting edge, 203 mm × 19 mm (8" × 3/4"). For use with 4267 mm (14 ft) blade

 Endbits, overlay, reversible pair for use with 203 mm (8") cutting edges

Blade, 4267 mm × 610 mm × 22 mm (14' × 24" × 7/8")

Blade, front

Cutting edge, 203 mm × 19 mm (8" × 3/4"). For use with 4267 mm (14 ft) blade

Endbits, overlay, reversible pair for use with 203 mm (8") cutting edges

GUARDS

Guard, transmission

OPERATOR ENVIRONMENT

Air conditioner with heater

Heater, cab

CAB/CANOPY

Seat, vinyl adjustable

Seat, cloth, contour

Fan, defroster, front window

Fan, defroster, rear window

Sun shade, rear

Wiper/washer, rear

Wipers, intermittent front

Mirrors, dual inside

Mirrors, outside mounted

Power port, 12V accessory

Radio ready entertainment

Tachometer/Speedometer

* Cab weights represent changes to Typically Equipped machine weights.

RIPPER/SCARIFIER

Ripper/Scarifier, rear mounted

Scarifier, mid mounted, V-type

LIGHTS

Bar mounted, low, directional and headlights

Cab and bar mounted, high, directional, headlights and work lights

POWER TRAIN

Autoshift

OTHER ATTACHMENTS

Product Link

Snow Wing Mounting, frame-ready

AccuGrade ARO

Dryer, air

Push plate, counterweight

Accumulator, blade lift

Battery, extreme duty (1,400 CCA)

Ether, starting aid

Heater, engine coolant, 220V

HYDRAULICS

Pump, hydraulic, high capacity

Hydraulic arrangements with one or more additional hydraulic valves are available for rear ripper, mid-mount scarifier, dozer, snow plow and snow wing.

BLADES, MOLDBOARDS

Blade, front

Cutting edge, 203 mm × 19 mm (8" × 3/4"). For use with 4267 mm (14 ft) blade

Endbits, overlay, reversible pair for use with 203 mm (8") cutting edges