The M Series Motor Grader has become the industry standard in operational efficiency and overall productivity. From building roads to maintaining them, M Series Motor Graders are designed to help you get more work done in less time. Unprecedented operator comfort and ease of service help to maximize your return on investment.
Engine
Base Power (1st Gear) - Net
136 kW
Engine Model
Cat C7
Bore
110 mm
Stroke
127 mm
Speed at Rated Power
2,000 rpm
Base Power (1st Gear) - Net - Metric
136 kW
Maximum Torque - VHP Plus
1052 N·m
VHP Plus Range - Net
136-159 kW (183-213 hp)
Torque Rise - VHP Plus
39%
VHP Plus Range - Net - Metric
136-159 kW (186-216 hp)
Displacement
7.2 l
Number of Cylinders
6
Derating Altitude
3048 m
Standard - Fan Speed - Maximum
1,450 rpm
Standard - Fan Speed - Minimum
600 rpm
Standard - Ambient Capability
43 °C
High Ambient - Fan Speed - Maximum
1,650 rpm
High Ambient - Fan Speed - Minimum
600 rpm
High - Ambient Capability
50 °C
Weights
Operating Weight - Typically Equipped
18400 kg
Gross Vehicle Weight - Typically Equipped
18400 kg
Gross Vehicle Weight - Maximum - Rear Axle
15206 kg
Gross Vehicle Weight - Base - Front Axle
4220 kg
Gross Vehicle Weight - Base - Rear Axle
12011 kg
Gross Vehicle Weight - Maximum - Total
22045 kg
Gross Vehicle Weight - Typically Equipped - Rear Axle
13310 kg
Gross Vehicle Weight - Base - Total
16231 kg
Gross Vehicle Weight - Maximum - Front Axle
6839 kg
Gross Vehicle Weight - Typically Equipped - Total
18400 kg
Gross Vehicle Weight - Typically Equipped - Front Axle
5090 kg
Power Train
Forward/Reverse Gears
8 Forward/6 Reverse
Transmission
Direct drive, power shift, countershaft
Brakes - Service
Multiple oil disc
Brakes - Service - Surface Area
23000 cm²
Brakes - Parking
Multiple oil disc
Brakes - Secondary
Dual circuit control system
Moldboard
Blade Width
3.7 m
Arc Radius
413 mm
Throat Clearance
166 mm
Cutting Edge Width
152 mm
Cutting Edge Thickness
16 mm
End Bit - Width
152 mm
End Bit - Thickness
16 mm
Blade Pull - Base GVW
10810 kg
Blade Pull - Maximum GVW
13685 kg
Width
3.7 m
Height
610 mm
Thickness
22 mm
Down Pressure - Base GVW
7244 kg
Down Pressure - Maximum GVW
11739 kg
Hydraulic System
Circuit Type
Electro-hydraulic load sensing, closed center
Pump Type
Variable piston
Pump Output
210 l/min
Maximum System Pressure
24150 kPa
Standby Pressure
3100 kPa
Operating Specifications
Top Speed - Forward
46.6 km/h
Top Speed - Reverse
36.8 km/h
Turning Radius - Outside Front Tires
7.6 m
Steering Range - Left/Right
47.5 degrees
Articulation Angle - Left/Right
20 degrees
Forward - 1st
4 km/h
Forward - 2nd
5.5 km/h
Forward - 3rd
8 km/h
Forward - 4th
11 km/h
Forward - 5th
17.1 km/h
Forward - 6th
23.3 km/h
Forward - 7th
32 km/h
Forward - 8th
46.6 km/h
Reverse - 1st
3.2 km/h
Reverse - 2nd
6 km/h
Reverse - 3rd
8.7 km/h
Reverse - 4th
13.5 km/h
Reverse - 5th
25.3 km/h
Reverse - 6th
36.8 km/h
Service Refill
Fuel Capacity
416 l
Cooling System
40 l
Hydraulic System - Tank
64 l
Transmission - Differential - Final Drives
64 l
Engine Oil
25 l
Tandem Housing - Each
64 l
Front Wheel Spindle Bearing Housing
0.5 l
Circle Drive Housing
7 l
Frame
Drawbar - Width
76.2 mm
Circle - Diameter
1530 mm
Circle - Blade Beam Thickness
40 mm
Drawbar - Height
152 mm
Front Frame Structure - Thickness
16 mm
Front Frame Structure - Height
305 mm
Front Frame Structure - Width
305 mm
Front Axle - Height to Center
571 mm
Front Axle - Wheel Lean - Left/Right
18 degrees
Front Axle - Total Oscillation per Side
32 degrees
Tandems
Height
506 mm
Width
201 mm
Sidewall Thickness - Inner
16 mm
Sidewall Thickness - Outer
18 mm
Drive Chain Pitch
50.8 mm
Wheel Axle Spacing
1523 mm
Tandem Oscillation - Front Up
15 degrees
Tandem Oscillation - Front Down
25 degrees
Blade Range
Circle Centershift - Right
728 mm
Circle Centershift - Left
695 mm
Moldboard Sideshift - Right
660 mm
Moldboard Sideshift - Left
510 mm
Maximum Blade Position Angle
90 degrees
Blade Tip Range - Forward
40 degrees
Blade Tip Range - Backward
5 degrees
Maximum Lift Above Ground
480 mm
Maximum Depth of Cut
715 mm
Maximum Shoulder Reach Outside of Tires - Left
1790 mm
Maximum Shoulder Reach Outside of Tires - Right
1978 mm
Ripper
Ripper Shank Holder Spacing
533 mm
Ripping Depth - Maximum
428 mm
Ripper Shank Holders
5
Penetration Force
9199 kg
Pry-Out Force
11641 kg
Machine Length Increase, Beam Raised
919 mm
Scarifier
Mid, V-Type - Scarifier Shank Holders
11
Front, V-Type, 5 or 11 Tooth - Scarifying Depth, Maximum
Front, V-Type, 5 or 11 Tooth - Scarifier Shank Holders
5/11
Rear - Scarifying Depth, Maximum
266 mm
Mid, V-Type - Scarifier Shank Holder Spacing
116 mm
Mid, V-Type - Working Width
1184 mm
Front, V-Type, 5 or 11 Tooth - Working Width
1205 mm
Rear - Working Width
2300 mm
Rear - Scarifier Shank Holders
9
Rear - Scarifier Shank Holder Spacing
267 mm
Dimensions
Height - Top of Cab Product Link
3378 mm
Length - Push Plate to Ripper
10136 mm
Length - Push Plate to Ripper Retracted
9818 mm
Height - Top of Cab
3308 mm
Width - Outside Front Tires
2511 mm
Length - Front Axle to Mid Tandem
6123 mm
Length - Front Tire to Rear of Machine
8754 mm
Length - Front Axle to Moldboard
2552 mm
Length - Between Tandem Axles
1523 mm
Width - Outside Rear Tires
2511 mm
Width - Tire Center Lines
2140 mm
Height - Front Axle Center
596 mm
Height - Exhaust Stack
3076 mm
Height - Top of Cylinders
3040 mm
Ground Clearance - Rear Axle
339 mm
Standards
Steering
ISO 5010:2007
Sound
ISO 6394:2008, ISO 6395:2008
ROPS/FOPS
ISO 3471:2008, ISO 3449:2005 Level II
Brakes
ISO 3450:1996
Net Power - VHP Plus
Gear - Reverse 2nd
140 kW
Gear - Forward 1st
136 kW
Gear - Forward 4th
148 kW
Gear - Reverse 1st
136 kW
Gear - Forward 6th
151 kW
Gear - Forward 7th
155 kW
Gear - Reverse 3rd
144 kW
Gear - Forward 2nd
140 kW
Gear - Forward 8th
159 kW
Gear - Forward 3rd
144 kW
Gear - Forward 5th
151 kW
Air Conditioning System
Air Conditioning
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas.
Operator Station
Comfort, productivity, advanced technology
Visibility
Good visibility is key to your safety and efficiency. Angled cab doors, tapered engine enclosure and a sloped rear window make it easy to see the moldboard and tires, as well as behind the machine. An optional rear vision camera further enhances lines of sight all around the machine.
Comfort and Control
Experience the most spacious, comfortable cab in the industry. Joystick controls replace levers, so hand and arm movement is reduced by 78%, helping reduce operator fatigue for better productivity. Rocker and control switches are in easy reach. A standard Cat Comfort Series suspension seat is fully adjustable. Control pods can be adjusted electronically so it is even easier to set up for an ideal operating position. Multiple isolation mounts significantly reduce sound and vibration for a more relaxed work environment. The high capacity Heating, Ventilation and Air Conditioning (HVAC) system dehumidifies and pressurizes the cab, circulates fresh air, seals out dust and keeps windows clear. An optional deluxe radio with CD features MP3 and Bluetooth technology.
In-Dash Instrument Cluster
Easy-to-read, high-visibility gauges and warning lamps keep you aware of critical system information. Cat Messenger offers real-time machine performance and diagnostic data to help you get the most from your machine.
Steering and Implement Controls
Unprecedented precision and ease of operationOperators are more comfortable and productive with two electro-hydraulic joysticks. New and experienced operators around the world report that the controls are easy to learn, and that the new electronically adjustable control pods make it easier to position them for optimal comfort, visibility and proper operation.
Joystick Functions
The left joystick controls steering, articulation, return-to-center, wheel lean, gear selection, left moldboard lift cylinder and float. The right joystick controls drawbar, circle and moldboard functions as well as electronic throttle control and manual differential lock/unlock. Joystick lean angle mirrors the steer tires’ turning angle. A brake tensioning system holds the joystick in position until the operator moves it. The steering control automatically reduces steering sensitivity at higher ground speeds for predictable control. Infinitely variable roller switches control the rear ripper and/or front lift group (when equipped).
Electronic Throttle Control
Electronic Throttle Control helps improve productivity by providing the best match of horsepower and torque for the demands of the application.
Articulation Return-to-Center
Automatically returns the machine to a straight frame position from any angle with the touch of a button.
Engine
Power and reliabilityCat C7 ACERT engine gives you the performance you need to maintain consistent grading speeds for maximum productivity. Superior torque and lugging capability provide the power to pull through sudden, short-term increases in loads. ACERT Technology lowers combustion chamber temperatures and optimizes fuel combustion to generate more work output for your fuel cost. ACERT engines also generate fewer emissions to meet the needs of equipment owners around the world.
Hydraulic Demand Fan
The hydraulic demand fan automatically adjusts speed according to engine cooling requirements. When cooling demand is reduced, you benefit from more power to the ground and improved fuel efficiency.
Engine Idle Shutdown Timer
This standard feature can be software-enabled by your Cat dealer to shut down the engine after a set period of time to save you fuel and help reduce emissions.
Power Train
Maximum power to the groundWe designed the M Series Motor Graders to give you efficiency and longevity in your most demanding applications.
Standard Automatic Differential Lock/Unlock unlocks the differential during a turn and re-locks when straight for easier operation and to help protect the power train.
Full Electronic Clutch Pressure Control system optimizes inching modulation for smooth shifts and directional changes, reducing stress on gears.
Programmable Autoshift option simplifies operation by allowing the operator to program the transmission to shift at optimal points to match your application.
Power Shift Countershaft Transmission is matched to the Cat engine to maximize power to the ground.
Wide operating gear range for maximum productivity.
Engine Over-Speed Protection prevents downshifting until an acceptable safe travel speed has been established.
Front and Rear Axles
The sealed spindle keeps front axle bearings lubricated and protected from contaminants. The Cat “Live Spindle” design places the larger tapered roller bearing on the outside, where the load is greater, extending bearing life. A bolt-on modular rear axle improves serviceability and contamination control with easy access to differential components.
Hydraulic Brakes
Oil-bathed multi-disc service brakes are hydraulically actuated for smooth, predictable braking and lower operating costs. Brakes are located at each tandem wheel and have a large total brake surface area to give you dependable stopping power and longer life.
Structures and Drawbar-Circle-Moldboard
Service ease and precise blade controlCaterpillar designs motor grader frame and drawbar components to give you performance and durability. The one-piece forged steel circle stands up to high stress loads, and a sacrificial wear system helps keep your service time and costs down. The articulation hitch features a large tapered roller bearing to carry loads evenly and smoothly. It is sealed to prevent contamination and a locking pin prevents articulation for safety during service or transport.
Easy Maintenance for More Uptime
The M Series drawbar, circle and moldboard are designed to make it easy for you to keep the components tight. Shims and patented top-adjust wear strips are easy to add or replace, dramatically reducing downtime. Durable nylon composite wear inserts maximize circle torque and component life. Sacrificial brass wear strips between the blade mounting group and moldboard can be easily adjusted and replaced. Shimless Moldboard Retention System uses vertical and horizontal adjusting screws to keep moldboard wear strips aligned for reduced blade chatter and precise blade control.
Blade Angle and Moldboard
An aggressive blade angle, optimized moldboard curvature and large throat clearance help you work more efficiently by allowing material to roll more freely along the blade. Heat-treated rails, hardened cutting edges and end bits, and heavy duty bolts to give you greater moldboard reliability and long service life. The link bar allows extreme moldboard positioning for easier bank sloping and ditch cutting/cleaning.
Hydraulics
Advanced machine control
Responsive Hydraulics
A proven load-sensing system and advanced electro-hydraulics give you superior implement control and responsive hydraulic performance that helps make your operator’s job easier. Continuously matching hydraulic flow/pressure to power demands creates less heat and reduces power consumption.
Consistent, Predictable Movement - Proportional Priority Pressure-Compensating (PPP-C) valves have different flow rates for the head and rod ends of the cylinder, so you can count on consistent, predictable implement response.
Balanced Flow - Hydraulic flow is proportioned to give you confidence that all implements will operate simultaneously without slowing the engine or speed of some implements.
Blade Float
Allows the blade to move freely under its own weight. By floating both cylinders, the blade can follow the contours of the ground. Floating only one cylinder permits the toe of the blade to follow a hard surface while the operator controls the slope with the other lift cylinder.
Independent Oil Supply
Large, separate hydraulic oil supplies prevent cross-contamination and provide proper oil cooling, which reduces heat build-up and extends component life. Cat XT™ hose allows high pressures for maximum power and reduced downtime.
Integrated Technologies
Solutions to make work easier and more efficient
Cat Grade Control
Cat Grade Control Cross Slope is an optional fully integrated, factory installed system that helps your operator more easily maintain desired cross slope by automatically controlling one side of the blade. The system is job-ready from day one, and scalable for the future with AccuGrade™ upgrade kits that provide additional 2D and/or 3D control.
AccuGrade Attachment Ready Option
An AccuGrade Attachment Ready Option can be ordered as a factory- or dealer-installed option. It includes built-in mounting points and internal wiring, to make installation of the AccuGrade grade control system faster and easier.
Cat AccuGrade
AccuGrade uses positioning and guidance technologies, machine sensors, and automatic blade control to help your operators get to grade faster, easier and more efficiently. Digital design plans, real-time cut/fill data, and in-cab guidance give operators detailed information to work more confidently and achieve greater accuracy, in fewer passes, using less material. Operators can stay on grade and improve productivity and accuracy by nearly 50 percent over conventional methods. Grade stakes and checkers are minimized, helping to make the work site safer and more cost effective. AccuGrade technologies include Cross Slope, Sonic, Laser, GPS, and/or Universal Total Station (UTS).
Cat Product Link™
Product Link helps take the guesswork out of equipment management with remote monitoring capabilities for one machine or your entire fleet. Track asset location, hours, fuel usage, diagnostic codes, idle time and more through the secure VisionLink™ user interface. Knowing where your equipment is, what it’s doing and how it's performing enables you or your Cat dealer to manage your fleet in real-time so you can maximize efficiency, improve productivity and lower operating costs.* *Product Link licensing not available in all areas. Please consult your Cat dealer for availability.
Safety
Designed with protection in mind
Operator Presence Monitoring System
System keeps the parking brake engaged and hydraulic implements disabled until the operator is seated and the machine is ready for operation.
Speed Sensitive Steering
Steering becomes less sensitive as ground speed increases for greater operator confidence and control.
Secondary Steering System
An electric hydraulic pump automatically engages in case of a drop in steering pressure so the operator can steer the machine to a stop.
Hydraulic Lockout
Hydraulic lockout disables all implement functions while still providing machine steering control. This is especially useful while roading.
Brake Systems
Brakes are located at each tandem wheel to eliminate braking loads on the power train. Redundant brake systems utilize accumulators to enable stopping in case of machine failure.
Walkways and Grab Rails
Perforated steel tandem walkways and convenient grab rails give you a sturdy platform when moving on, off and around the machine.
Circle Drive Slip Clutch
Circle Drive Slip Clutch protects the drawbar, circle and moldboard from shock loads if the blade encounters an immovable object and also reduces the possibility of abrupt directional changes in poor traction conditions.
Blade Lift Accumulators
Blade Lift Accumulators help absorb impact loads by allowing vertical blade travel. This optional feature helps reduce wear and also helps reduce impact loading for enhanced operator safety.
M Series Safety Features
Rearview camera with in-cab monitor
Grouped, ground level service points
Laminated front window glass
Optional LED Lighting
Ground-level electrical disconnect switch
Ground-level engine shutoff switch
Anti-glare paint eases night operation
Front and rear fenders
Serviceability and Customer Support
When uptime countsCat motor graders are designed to help you increase uptime and reduce costs. Grouped service points and extended service intervals save maintenance time. A standard Automatic Lubrication System maintains proper grease on working surfaces, increasing component life and purging contaminants from pins and bushings to help prevent damage. Standard Fast-Fill allows customers to refuel in less than four minutes so you can get back on the job quickly.
Unparalleled Dealer Support
When it comes to supporting you, Cat dealers are second to none. From machine selection and purchase to maintenance support and rebuilds, Cat dealers have the experience and capabilities to help keep you up and running.
Smart Machine Systems
Advanced Diagnostics
Cat Messenger, combined with full systems integration, enhances diagnostic capability for quick analysis of critical data.
Electronic Technician (Cat ET) lets service technicians access stored diagnostic data and configure machine parameters through the Cat Data Link.
Low Battery Elevated Idle raises idle speed when low system voltage is detected, ensuring adequate system voltage and improving battery reliability.
Automatic Engine Deration protects the engine by automatically lowering engine torque output and alerting the operator if critical conditions are detected.
Work Tools and Attachments
Equip your machine for the job
Moldboard Options
The 12M motor grader comes equipped with a 3.7 m (12 ft) moldboard. An optional 4.3 m (14 ft) blade is available, as well as left side extensions for greater versatility.
Ground Engaging Tools (GET)
A variety of tools are available from Cat Work Tools, including cutting edges, graderbits and end bits, all designed for maximum service life and productivity.
Front Mounted Groups
A front mounted push plate or front lift group are available. The front lift group can be combined with a front dozer blade or front scarifier for added versatility.
Rear Ripper/Scarifier
Made to penetrate tough material fast and rip thoroughly for easier movement with the moldboard. The ripper includes three shanks (with holders for five). Nine scarifier shanks can also be added for additional versatility.
Sustainability
Thinking generations ahead
Fuel Efficiency
• Integrated machine systems and technologies improve productivity for greater accuracy, allowing the machine to do more work per gallon of fuel.
Green House Gas Emissions
• Reduced fuel consumption means reduced CO2 emissions.
Material Efficiency and Lifecycle Costs
Replaceable wear parts save maintenance time and cost, and extend major component life.
Major components are built to be rebuilt, eliminating waste and saving customers money by giving the machine and/or major components a second - and even third-life.
Approximately 95% of machine materials can be recycled (ISO 16714) to conserve valuable natural resources and further enhance machine end-of-life value.
Sound
• Reduced engine noise and quieter cabs mean lower operator and spectator sound levels.
Safety
Ecology drains help make draining fluids more convenient and help prevent spills.
Cartridge style hydraulic fluid filters provide safe clean draining of filters prior to replacement, helping to prevent fluid spills.
A variety of safety features help safeguard operators and others on the job site.
POWER TRAIN
Air cleaner, dual stage, dry type, diesel, with automatic engine derate and automatic dust ejector, service indicator through Cat Messenger
Air-to-air after cooler (ATAAC)
Belt, serpentine, automatic tensioner
Brakes, oil disc, four-wheel, hydraulic
Demand fan, hydraulic
Differential Lock/Unlock, Automatic
Drain, engine oil, ecology
Electronic over speed protection
Engine Cat C7 with ACERT Technology, diesel, with automatic engine derate and idle control. Note: Engine meets non-current U.S. EPA Tier 3 or EU Stage IIIA emission standards.
Engine Idle Shutdown (EIS)
Fuel tank, 416 L (110 gal), ground level access and sediment drain
Fuel-water separator
Muffler, underhood
Parking brake - multi-disc, sealed, oil?cooled
Priming pump, fuel
Rear axle, modular
Sediment drain, fuel tank
Tandem drive
Transmission, 8F/6R, power shift, direct drive
Variable Horsepower Plus (VHP Plus)
Air cleaner, dual stage, dry type, diesel, with automatic engine derate and automatic dust ejector, service indicator through Cat Messenger
Air-to-air after cooler (ATAAC)
Belt, serpentine, automatic tensioner
Brakes, oil disc, four-wheel, hydraulic
Demand fan, hydraulic
Differential Lock/Unlock, Automatic
Drain, engine oil, ecology
Electronic over speed protection
Engine Cat C7 with ACERT Technology, diesel, with automatic engine derate and idle control. Note: Engine meets non-current U.S. EPA Tier 3 or EU Stage IIIA emission standards.
Engine Idle Shutdown (EIS)
Fuel tank, 416 L (110 gal), ground level access and sediment drain
Fuel-water separator
Muffler, underhood
Parking brake - multi-disc, sealed, oil?cooled
Priming pump, fuel
Rear axle, modular
Sediment drain, fuel tank
Tandem drive
Transmission, 8F/6R, power shift, direct drive
Variable Horsepower Plus (VHP Plus)
ELECTRICAL
Alarm, back up
Alternator, 80 ampere, sealed
Batteries, maintenance free, heavy duty, 1,125 CCA
Breaker panel, ground accessible
Cab harness and electrical hydraulic valves
Electrical system, 24V
Grade Control Ready - Cab harness, software, electrical hydraulic valves, bosses and brackets
Lights, roof-mounted roading, reversing, LED stop and tail
Joystick hydraulic controls right/left blade lift with float position, circle drive, blade sideshift and tip, centershift, front wheel lean, articulation and steering
Joystick, adjustable armrests
Joystick gear selection
Joystick hydraulic power steering
Ladders, cab, left and right side
Lights, night time cab
Mirror, inside rearview, wide angle
Power port, 12V
Radio Ready, Entertainment
ROPS cab, sound suppressed
Seat, cloth-covered, comfort suspension
Seat belt, retractable 76 mm (3 in)
Storage area for cooler/lunchbox
Throttle control, electronic
Windows, laminated glass: - fixed front with intermittent wiper - side and rear (3)
FLUIDS
Antifreeze
Extended Life Coolant to -35° C (-30° F)
Antifreeze
Extended Life Coolant to -35° C (-30° F)
TIRES, RIMS AND WHEELS
Partial allowance for tires on 254 × 607 mm (10 × 24 in) multi-piece rims is included in the base machine price and weight
Hydraulic arrangements with one or more additional hydraulic valves are available for ripper, dozer, snow wings, front lift group, mid-mount scarifier.
Security system
Snow wing mounting, frame ready
Sound suppression
Starting aid, ether
WORK TOOLS/GROUND ENGAGING TOOLS
Blade extension, left hand, 610 mm (2 ft)
Endbits, overlay
Front lift group, mounting
Front lift group
Mid-Mount Scarifier, Package
Mid-Mount Scarifier, Mounting
Moldboard: 4267 × 610 × 22 mm (14 ft × 24 in × 7/8 in)
Moldboard: 4267 × 686 × 25 mm (14 ft × 27 in × 1 in)
Push plate
Ripper, mounting
Ripper, rear
Ripper tooth
Scarifier, front
Blade extension, left hand, 610 mm (2 ft)
Endbits, overlay
Front lift group, mounting
Front lift group
Mid-Mount Scarifier, Package
Mid-Mount Scarifier, Mounting
Moldboard: 4267 × 610 × 22 mm (14 ft × 24 in × 7/8 in)
Moldboard: 4267 × 686 × 25 mm (14 ft × 27 in × 1 in)
Push plate
Ripper, mounting
Ripper, rear
Ripper tooth
Scarifier, front
MACHINE ARRANGEMENTS
Snow Arrangement
Snow Arrangement
OPTIONAL TIRE ARRANGEMENTS
Rim Size - 9 x 24; Wheel Group - Single-Piece; Tires - 13.00-24
Rim Size - 9 x 24; Wheel Group - Single-Piece; Tires - 14R24
Rim Size - 13 x 25; Wheel Group - Single-Piece; Tires - 17.5R25
Rim Size - 10 x 24; Wheel Group - Multi-Piece; Tires - 14.00-24
Rim Size - 10 x 24; Wheel Group - Multi-Piece; Tires - 14.00R24
Rim Size - 10 x 24; Wheel Group - Multi-Piece; Tires - 17.5R25