• Specification Summary

  • Base Power (1st Gear) - Net 128 kW
  • Engine Model Cat C7
  • Displacement 7.2 l
  • Bore 105 mm
New Name, Same Fame. The 140K is now named the 140. Equipped with a Cat® C7 engine, direct-drive powershift transmission, and load-sensing hydraulics solutions, the 140 motor grader takes on your grading work with power, control, comfort and productivity.

Engine

Base Power (1st Gear) - Net 128 kW
Engine Model Cat C7
Displacement 7.2 l
Bore 105 mm
Stroke 127 mm
High - Ambient Capability 50 °C
Maximum Torque 996 N·m
Note (3) Maximum torque measured at 1,000 rpm in gears 4-8.
VHP Range - Net 128-143 kW (171-191 hp)
Number of Cylinders 6
Torque Rise 46%
Note (1) Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 standards in effect at the time of manufacture.
Derating Altitude 3048 m
Note (2) Net power advertised is the power available at rated speed of 2,000 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator.

Weights

Operating Weight - Typically Equipped 17271 kg
Gross Vehicle Weight - Typically Equipped - Rear Axle 12335 kg
Gross Vehicle Weight - Base - Rear Axle 10491 kg
Gross Vehicle Weight - Base - Total 14750 kg
Gross Vehicle Weight - Base - Front Axle 4259 kg
Gross Vehicle Weight - Typically Equipped - Total 17271 kg
Gross Vehicle Weight - Typically Equipped - Front Axle 4936 kg
Gross Vehicle Weight - Typically Equipped 17271 kg

Moldboard

Blade Width 3.7 m
Arc Radius 413 mm
Throat Clearance 120 mm
Moldboard - Height 610 mm
End Bit - Thickness 16 mm
End Bit - Width 152 mm
Cutting Edge Thickness 16 mm
Cutting Edge Width 152 mm
Moldboard - Thickness 22 mm

Blade Range

Moldboard Sideshift - Left 512 mm
Circle Centershift - Right 728 mm
Circle Centershift - Left 752 mm
Blade Tip Range - Backward 5°
Maximum Lift Above Ground 480 mm
Maximum Depth of Cut 735 mm
Maximum Shoulder Reach Outside of Tires - Left 1896 mm
Maximum Shoulder Reach Outside of Tires - Right 1978 mm
Blade Tip Range - Forward 40°
Moldboard Sideshift - Right 663 mm

Frame

Front Axle - Wheel Lean - Left/Right 18°
Front Axle - Total Oscillation per Side 32°
Circle - Outer Diameter 1530 mm

Air Conditioning System

Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas.