• Specification Summary

  • Operating Weight - Typically Equipped 17390 kg
  • Blade Width 3.7 m
  • Net Power Range (Tier 3) 176 HP
  • Weight* 17390 kg
  • In stock (10) View Pricing

* Actual availability may vary subject to prior Sales

The new Cat® 140 GC motor grader combines performance with cost efficient owning and operating. Servicing the machine is easy with grouped filter locations. Comfort options, including a heating/cooling system or air suspension seat, keep you productive throughout the day.

Weights

Operating Weight - Typically Equipped 17390 kg

Moldboard

Blade Width 3.7 m
Throat Clearance 112 mm
Blade Height 509 mm
End Bit 152 mm
Cutting Edge Width 152 mm
Arc Radius 413 mm

Engine

Net Power Range (Tier 3) 176 HP
Displacement 7.01 l
Bore 105 mm
Stroke 135 mm
Engine Model Cat 7.1
Note (1) Net power advertised is the power available at rated speed of 2,200 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator.
Maximum Torque - ISO 9249 889 N·m
Standard Capability 43 °C
Note (4) The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 2.0 kg of refrigerant which has a CO2 equivalent of 2.86 metric tonnes.
Derating Altitude 4500 m
Number of Cylinders 6
Emissions U.S. EPA Tier 3/EU Stage IIIA
Note (3) Power as declared per ISO 14396
Note (2) Net power advertised is the power available at rated speed of 2,200 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator.
Torque Rise - ISO 9294 40%
Engine RPM 2,200

Machine Weight

Weight* 17390 kg
Note Typically equipped operating weight is calculated with full fuel tank, coolant, lubricants, operator, push block, ROPS closed cab, rear ripper/scarifier, 4.3 m (14 ft) blade, 17.5-25 MP tires on multi-piece rims and other equipment.

Service Refill Capacities

Circle Drive without Slip Clutch 1.5 l
Circle Drive with Slip Clutch 7.5 l
Transmission 18 l
Cooling System 10.6 gal (US)
Hydraulic System 45 l
Fuel Tank 297 l
Engine Crankcase 21 l

Blade Range

Moldboard Side Shift Left 663 mm
Maximum Depth of Cut 735 mm
Moldboard Side Shift Right 512 mm
Maximum Shoulder Reach Right 1928 mm
Maximum Lift Above Ground 480 mm
Circle Center Shift Left 752 mm
Maximum Shoulder Reach Left 1764 mm
Blade Tip Range Backward 5
Circle Center Shift Right 728 mm
Blade Tip Range Forward 40

Dimensions

Width 2428 mm
Maximum Height 3839 mm
Length of Machine* 10322 mm
Note *Typically equipped with push block and ripper.

Air Conditioning System

Note The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430).The system contains 2.0 kg of refrigerant which has a CO2 equivalent of 2.86 metric tonnes.