The new Cat® 140 GC motor grader combines performance with cost efficient owning and operating. Servicing the machine is easy with grouped filter locations. Comfort options, including a heating/cooling system or air suspension seat, keep you productive throughout the day.
Weights
Operating Weight - Typically Equipped |
17390 kg |
Moldboard
Blade Width |
3.7 m |
Throat Clearance |
112 mm |
Blade Height |
509 mm |
End Bit |
152 mm |
Cutting Edge Width |
152 mm |
Arc Radius |
413 mm |
Engine
Net Power Range (Tier 3) |
176 HP |
Displacement |
7.01 l |
Bore |
105 mm |
Stroke |
135 mm |
Engine Model |
Cat 7.1 |
Note (1) |
Net power advertised is the power available at rated speed of 2,200 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator. |
Maximum Torque - ISO 9249 |
889 N·m |
Standard Capability |
43 °C |
Note (4) |
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 2.0 kg of refrigerant which has a CO2 equivalent of 2.86 metric tonnes. |
Derating Altitude |
4500 m |
Number of Cylinders |
6 |
Emissions |
U.S. EPA Tier 3/EU Stage IIIA |
Note (3) |
Power as declared per ISO 14396 |
Note (2) |
Net power advertised is the power available at rated speed of 2,200 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator. |
Torque Rise - ISO 9294 |
40% |
Engine RPM |
2,200 |
Machine Weight
Weight* |
17390 kg |
Note |
Typically equipped operating weight is calculated with full fuel tank, coolant, lubricants, operator, push block, ROPS closed cab, rear ripper/scarifier, 4.3 m (14 ft) blade, 17.5-25 MP tires on multi-piece rims and other equipment. |
Service Refill Capacities
Circle Drive without Slip Clutch |
1.5 l |
Circle Drive with Slip Clutch |
7.5 l |
Transmission |
18 l |
Cooling System |
10.6 gal (US) |
Hydraulic System |
45 l |
Fuel Tank |
297 l |
Engine Crankcase |
21 l |
Blade Range
Moldboard Side Shift Left |
663 mm |
Maximum Depth of Cut |
735 mm |
Moldboard Side Shift Right |
512 mm |
Maximum Shoulder Reach Right |
1928 mm |
Maximum Lift Above Ground |
480 mm |
Circle Center Shift Left |
752 mm |
Maximum Shoulder Reach Left |
1764 mm |
Blade Tip Range Backward |
5 |
Circle Center Shift Right |
728 mm |
Blade Tip Range Forward |
40 |
Dimensions
Width |
2428 mm |
Maximum Height |
3839 mm |
Length of Machine* |
10322 mm |
Note |
*Typically equipped with push block and ripper. |
Air Conditioning System
Note |
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430).The system contains 2.0 kg of refrigerant which has a CO2 equivalent of 2.86 metric tonnes. |