Engine

Gross Power	227.4 kW
Engine Model	Cat® C9 ACERT™
Rated Power	210.3 kW
Displacement	8.8 L

Operating Specifications

Max Reach w/ Head	11.3 m
Bare Pin Lift at Max Reach w/o Head	5700 kg (12,500 lb) @ 10.7m (35 ft)
Ground Clearance	889.0 mm
Maximum Drawbar Pull	45867.0 kg

Weights

Operating Weight w/o Head	34430.0 kg
Est Operating Weight	36000.3 kg

Service Refill Capacities

Cooling System	61.0 L
Engine Oil	39.0 L
Hydraulic System	370.0 L
Hydraulic Tank	323.0 L
Swing Drive	10.0 L
Fuel Tank	1181.0 L

Undercarriage

Number of Rollers	9 per side
Track Gauge	2591 mm to 2870 mm (102 in to 113 in)
Track Length	4877.0 mm
Undercarriage (size/pitch)	345 HEX/215.9 mm (8.5 in)

Powertrain

Built for power, reliability, low maintenance, excellent fuel economy and low emissions.

Powerful Performance

The Cat® C9 electronically controlled ACERT delivers power while meeting all current Tier 2 emission standards. All models contain a fuel/water separator, engine air intake heater and a dual-stage combination air cleaner with pre-cleaner.

High Capacity Cooling System

The side-by-side radiator/oil cooler gives excellent cooling capacity for high production bunching and harvesting. On-demand Flexxaire™ fan activates only when required and allows the cooling fan to purge debris from the radiator area, keeping a cleaner cooling system. The IQAN control system infinitely controls blade pitch angle to reduce horsepower demand from the cooling package, and lower operating costs.

Engine Oil

Caterpillar engine oil is formulated to optimize engine life and performance and is recommended for use in Cat diesel engines. The engine oil change interval has been increased to 500 hours.

Service

The clamshell engine compartment provides easy access to oil filters, oil dipstick, hydraulic fill pump and hoses reducing maintenance time.

Low Exhaust Emissions

The Cat C9 ACERT engine is a low emission engine designed to meet US EPA off-road Tier 2 emission regulations.

Hydraulic Packages

Powerful hydraulic system combined with a powerful boom and stick maximize productivity in any felling or harvesting job.

Electric Hydraulic Oil fill Pump

The hydraulic oil site gauge provides easy visibility to know when hydraulic oil needs to be added. An easy accessible service wand allows hydraulic oil to be pumped through the hydraulic filtering system and into the tank. This reduces maintenance down time and helps to maintain oil cleanliness requirements.

Variable Displacement Pump

All Cat® 500 series FTS Track Feller Bunchers are equipped with 200 cc variable displacement pump for travel, a 200 cc boom and implement functions, and a dedicated 55 cc variable displacement pump for felling attachments. Optional hydraulics for dangle harvesting or processor heads and intermittent saw heads are available for all models.

Caterpillar® Hydraulic Oil

Provides maximum protection against mechanical and corrosive wear in all hydraulic systems. It’s high zinc content reduces wear, and extends pump life. Provided certain requirements are met (e.g. S•O•SSM analysis every 500 hours), the hydraulic oil change interval is extended from 2,000 hours to 4,000 hours.

Biodegradable Hydraulic Oil

The optional biodegradable hydraulic oil (HEES) is formulated to provide excellent high-pressure and high-temperature characteristics and is fully compatible with the all hydraulic components. HEES is fully decomposed by soil or water microorganisms, providing a more environmentally-sound alternative to mineral-based oils.

ToughGuard Hoses™

Abrasion resistant hoses along the boom and stick provide strength and flexibility. The ToughGuard cover consists of a thin layer of UHMW polyethylene bonded to the rubber cover, providing exceptional abrasion resistance. In many applications, it eliminates the need for external guarding.

Operator Comfort

The interior layout maximizes operator space, provides exceptional comfort and reduces operator fatigue.

Viewing

Cab design optimizes post structures and window placement to provide excellent operator visibility to front, sides and rear. Standard 1.25" thick “Margard” front window maximizes operator protection. All purpose built forestry cabs are designed with heavy-duty guarding, meeting FOPS/ROPS/OPS requirements.

Fresh Air

Large sliding side window with screen to allow fresh air into cab.

Interior Operator Station

The operator station is quiet with conveniently placed controls, joysticks and an ergonomically designed seat reducing operator fatigue.

Quiet Operation

Isolation mounted cab and engine reduces sound levels and vibration for quiet and comfortable operation.

Large Storage Compartment

A large storage space behind the seat, provides sufficient room for a lunch box, hard hats and work tools.

IQAN

IQAN display allows the operator to continuously monitor the operating systems of the machine. This provides early warning for potential problems, and allows the operator to adjust control parameters maximizing performance and productivity.

Control Convenience

Each control is placed within easy reach of the operator. Joysticks control the implement and attachment functions, providing easy operation.

Foot Pedals

Ergonomically located pedals with side-by-side foot rests provide for maximum operator comfort while operating machine travel.

Skylight

A unique large polycarbonate skylight provides excellent upward visibility, and acts as an alternate escape hatch.

Electrical System

24-volt electrical system with in-cab 24-12 volt converter, dual in-cab 12 volt power points and one 24 volt power point. Power is provided by two 12 volt maintenance free batteries and 95 amp alternator. An optional cold weather starting attachment may be selected to provide two additional batteries, a HD starter, and HD cables.

Leveling System

Tilting mechanism provides stability and comfort in steep slope conditions.

Tilt Mechanism

With the most robust tilt mechanism in the industry, the FTS 552 tilter has a patented 3-cylinder tilt mechanism with simultaneous tilting forward and side-to-side. Trunion cylinders are mounted on 2" (51 mm) steel plates and transfer vertical loads down to the interface of the track frames and carbody, putting the load into the track and ground.

Cylinders

Three-cylinder tilt mechanism with simultaneously 20 degree forward tilt and 11 degree side-to-side tilt.

Ground Clearance

FTS machines have excellent ground clearance and open carbody design. This provides increased mobility by eliminating debris interference and other obstacles encountered in rugged working conditions.

Undercarriage

High quality custom engineered, heavy duty forestry undercarriage.

Reliable

Precision welded, high-wide carbody has strong frames that reduce flexing and increase reliability of rollers and track links throughout the life of the machine. Nine bottom rollers per side.

Travel Motor

Proven final drives and travel motors provide up to 104,000 lb (47174 kg) of tractive effort on the 552 giving excellent traction and power to the ground.

Track Guards

All models contain bolt-on track guards.

Carbody

Leveling 552 model features a bolted track frame to carbody design. This provides a standard gauge width, or allows adjustment to a wide gauge width to improve machine stability, and increase productivity on steep slope applications.

Boom and Stick

Designed for maximum reach and lift capacity.

With up to 21,800 lbs (9400 kg) of bare pin lift capacity at 21.5' (6.6 m) on the 552 track feller buncher (with the standard linkage), the 500 series machines are dominant over competitors in their size classes. With market leading lift capacity, 28.8' (8.6 m) of reach, and tight stick tuck-in capabilities, these machines deliver high performance felling in all applications. The 552 track harvester delivers the same high performance with 12,500 lbs (5700 kg) of bare pin lift capacity and 37' (11.3 m) of maximum reach, while the 552 long felling linkage delivers 16,900 lbs (7700 kg) of bare pin lift capacity at 32' (9.7 m).

Versatility

Caterpillar® disc saw attachments are available to meet felling needs.

Attachments

From plantation thinning to select cut of large diameter wood, Cat felling attachments provide reliable productive felling solutions. These range in cut capacity from 22" to 24". Designed to allow maximum visibility of the cutting area, all saws utilize high pressure hydraulics for fast saw recovery and quick arm speed. This provides a positive impact on production and better tree control.

Tilt

All models are available with a standard 40 degree partial lateral tilt, or an optional 220 degree full lateral tilt.

Owning and Operating Costs

Cat® 500 Series Track Feller Bunchers and Track Harvesters provide the best value for your operation.

ACERT Technology Fuel Economy

Based on Caterpillar® testing, the fuel economy of Cat® engines with ACERT technology is 3 to 5 percent better than current competing technologies. This fuel economy is directly related to the complete combustion of fuel due to the integration between the electronic control that monitors conditions, the air management system that controls air volume and the fuel injection system that delivers just the right amount of fuel as needed.

Clam-Shell Service Doors

The hydraulically actuated clam-shell service doors provide easy and quick access reducing machine maintenance time. Less service time means less down time, more work time and greater productivity.

Serviceability

Extended Service intervals and easy access reduce operating costs.

Extended Service Intervals

Caterpillar® service and maintenance intervals have been extended to reduce machine service time, increase machine availability and reduce operating costs. Hydraulic oil change intervals can be extended from 2,000 hours to 4,000 hours. Engine coolant change intervals are 12,000 hour with Cat Extended Life Coolant/Anti-freeze. Regularly scheduled maintenance extends machine service life and lowers overall operating costs. 500-hour oil change interval reduces overall maintenance costs.

Flexxaire™ Fan

Standard Flexxaire fan operates only when required and allows the cooling fan to purge debris from the radiator area, reducing cleaning maintenance time.

Clam-Shell Service Doors

The hydraulically actuated clam-shell service doors provide easy and quick access reducing maintenance down time.

Customer Focus

Cat® dealer services help you operate longer with lower costs.

Product Support

Your Cat® dealer will help provide you with parts quickly and efficiently by utilizing the Cat worldwide dealer network parts system, minimizing downtime.

Machine Selections

Make detailed comparisons of the machines you are considering before you buy. What are job requirements, machine attachments and operating hours? What production is needed? Your Cat dealer can provide recommendations.

Customer Support Agreements

Cat dealers offer a wide variety of product support agreements, and work with customers to develop a plan that best meets specific needs. These plans can help protect your investment.

Operation

Improving operating techniques can boost your profits. The Cat Forest Products Consulting Services Group offers certified operator training classes to help maximize the return on your machine investment.

Maintenance Services

Repair option programs guarantee the cost of repairs up front. Diagnostic programs such as S•O•SSM Analysis and Coolant Sampling and Technical Analysis help avoid unscheduled repairs.

Replacement

Repair, rebuild or replace? Your Cat dealer can help you evaluate the cost involved so you can make the right choice.

Electrical

 24-volt electrical system

 2-12 volt maintenance free batteries

 95 Amp alternator

 IQAN programmable controls

 MDL large screen display

Guards

 Twin hydraulically actuated hinged engine enclosure with warning alarm

 Engine fan guard

 Bottom guards

 Isolation mounted cab and engine

 Heavy duty radiator guard door

Twin hydraulically actuated hinged engine enclosure with warning alarm

 24-volt electrical system

 2-12 volt maintenance free batteries

 95 Amp alternator

 IQAN programmable controls

 MDL large screen display

 Twin hydraulically actuated hinged engine enclosure with warning alarm

 Engine fan guard

 Bottom guards

 Isolation mounted cab and engine

 Heavy duty radiator guard door

 OPS/FOPS/ROPS cab

 Dual joystick control

 Reverse slope windshield

 Air ride seat

 Skylight - alternate escape hatch

 Top escape hatch

 3 inch retractable seat belt

 Heater/air conditioner w/climate control

 DIN mount radio ready with speakers

 Operator sound suppression to standards

 Travel alarm

 Cup holders (2)

 2-12 volt and 1-24 volt power outlets

 Front Window, 1.25 in Thick Margard

 C9 ACERT engine meets Tier 2 emissions requirements

 Infinitely variable travel speed

 Under hood centrifugal precleaner and primary air filter

 Heavy-duty cooling package

 Electric fuel priming pump

 Track roller guards with access holes

 Hydraulic track adjusters

 Double flange bottom rollers

 Caterpillar® 330 HEX bolted, non-leveling carbody, variable gauge

 Caterpillar 345 undercarriage bolted, variable gauge leveling carbody, GFT 110 final drives

 Vandalism protection

 Spare hose storage area

 Storage area

 Flexxaire™ Fan

 Fuel water separator

 312 US gallon fuel tank

 Dedicated fixed displacement pilot pump

 Dedicated variable displacement pumps for track and implement functions

 30 gpm variable displacement saw pump

 Cat® 325C swing drive and swing motor

 Electric hydraulic oil fill pump

 84 US gal hydraulic tank

 50% concentration extended life coolant

Engine fan guard

 24-volt electrical system

 2-12 volt maintenance free batteries

 95 Amp alternator

 IQAN programmable controls

 MDL large screen display

 Twin hydraulically actuated hinged engine enclosure with warning alarm

 Engine fan guard

 Bottom guards

 Isolation mounted cab and engine

 Heavy duty radiator guard door

 OPS/FOPS/ROPS cab

 Dual joystick control

 Reverse slope windshield

 Air ride seat

 Skylight - alternate escape hatch

 Top escape hatch

 3 inch retractable seat belt

 Heater/air conditioner w/climate control

 DIN mount radio ready with speakers

 Operator sound suppression to standards

 Travel alarm

 Cup holders (2)

 2-12 volt and 1-24 volt power outlets

 Front Window, 1.25 in Thick Margard

 C9 ACERT engine meets Tier 2 emissions requirements

 Infinitely variable travel speed

 Under hood centrifugal precleaner and primary air filter

 Heavy-duty cooling package

 Electric fuel priming pump

 Track roller guards with access holes

 Hydraulic track adjusters

 Double flange bottom rollers

 Caterpillar® 330 HEX bolted, non-leveling carbody, variable gauge

 Caterpillar 345 undercarriage bolted, variable gauge leveling carbody, GFT 110 final drives

 Vandalism protection

 Spare hose storage area

 Storage area

 Flexxaire™ Fan

 Fuel water separator

 312 US gallon fuel tank

 Dedicated fixed displacement pilot pump

 Dedicated variable displacement pumps for track and implement functions

 30 gpm variable displacement saw pump

 Cat® 325C swing drive and swing motor

 Electric hydraulic oil fill pump

 84 US gal hydraulic tank

 50% concentration extended life coolant

Bottom guards

 24-volt electrical system

 2-12 volt maintenance free batteries

 95 Amp alternator

 IQAN programmable controls

 MDL large screen display

 Twin hydraulically actuated hinged engine enclosure with warning alarm

 Engine fan guard

 Bottom guards

 Isolation mounted cab and engine

 Heavy duty radiator guard door

 OPS/FOPS/ROPS cab

 Dual joystick control

 Reverse slope windshield

 Air ride seat

 Skylight - alternate escape hatch

 Top escape hatch

 3 inch retractable seat belt

 Heater/air conditioner w/climate control

 DIN mount radio ready with speakers

 Operator sound suppression to standards

 Travel alarm

 Cup holders (2)

 2-12 volt and 1-24 volt power outlets

 Front Window, 1.25 in Thick Margard

 C9 ACERT engine meets Tier 2 emissions requirements

 Infinitely variable travel speed

 Under hood centrifugal precleaner and primary air filter

 Heavy-duty cooling package

 Electric fuel priming pump

 Track roller guards with access holes

 Hydraulic track adjusters

 Double flange bottom rollers

 Caterpillar® 330 HEX bolted, non-leveling carbody, variable gauge

 Caterpillar 345 undercarriage bolted, variable gauge leveling carbody, GFT 110 final drives

 Vandalism protection

 Spare hose storage area

 Storage area

 Flexxaire™ Fan

 Fuel water separator

 312 US gallon fuel tank

 Dedicated fixed displacement pilot pump

 Dedicated variable displacement pumps for track and implement functions

 30 gpm variable displacement saw pump

 Cat® 325C swing drive and swing motor

 Electric hydraulic oil fill pump

 84 US gal hydraulic tank

 50% concentration extended life coolant

Isolation mounted cab and engine

 24-volt electrical system

 2-12 volt maintenance free batteries

 95 Amp alternator

 IQAN programmable controls

 MDL large screen display

 Twin hydraulically actuated hinged engine enclosure with warning alarm

 Engine fan guard

 Bottom guards

 Isolation mounted cab and engine

 Heavy duty radiator guard door

 OPS/FOPS/ROPS cab

 Dual joystick control

 Reverse slope windshield

 Air ride seat

 Skylight - alternate escape hatch

 Top escape hatch

 3 inch retractable seat belt

 Heater/air conditioner w/climate control

 DIN mount radio ready with speakers

 Operator sound suppression to standards

 Travel alarm

 Cup holders (2)

 2-12 volt and 1-24 volt power outlets

 Front Window, 1.25 in Thick Margard

 C9 ACERT engine meets Tier 2 emissions requirements

 Infinitely variable travel speed

 Under hood centrifugal precleaner and primary air filter

 Heavy-duty cooling package

 Electric fuel priming pump

 Track roller guards with access holes

 Hydraulic track adjusters

 Double flange bottom rollers

 Caterpillar® 330 HEX bolted, non-leveling carbody, variable gauge

 Caterpillar 345 undercarriage bolted, variable gauge leveling carbody, GFT 110 final drives

 Vandalism protection

 Spare hose storage area

 Storage area

 Flexxaire™ Fan

 Fuel water separator

 312 US gallon fuel tank

 Dedicated fixed displacement pilot pump

 Dedicated variable displacement pumps for track and implement functions

 30 gpm variable displacement saw pump

 Cat® 325C swing drive and swing motor

 Electric hydraulic oil fill pump

 84 US gal hydraulic tank

 50% concentration extended life coolant

Heavy duty radiator guard door

 24-volt electrical system

 2-12 volt maintenance free batteries

 95 Amp alternator

 IQAN programmable controls

 MDL large screen display

 Twin hydraulically actuated hinged engine enclosure with warning alarm

 Engine fan guard

 Bottom guards

 Isolation mounted cab and engine

 Heavy duty radiator guard door

 OPS/FOPS/ROPS cab

 Dual joystick control

 Reverse slope windshield

 Air ride seat

 Skylight - alternate escape hatch

 Top escape hatch

 3 inch retractable seat belt

 Heater/air conditioner w/climate control

 DIN mount radio ready with speakers

 Operator sound suppression to standards

 Travel alarm

 Cup holders (2)

 2-12 volt and 1-24 volt power outlets

 Front Window, 1.25 in Thick Margard

 C9 ACERT engine meets Tier 2 emissions requirements

 Infinitely variable travel speed

 Under hood centrifugal precleaner and primary air filter

 Heavy-duty cooling package

 Electric fuel priming pump

 Track roller guards with access holes

 Hydraulic track adjusters

 Double flange bottom rollers

 Caterpillar® 330 HEX bolted, non-leveling carbody, variable gauge

 Caterpillar 345 undercarriage bolted, variable gauge leveling carbody, GFT 110 final drives

 Vandalism protection

 Spare hose storage area

 Storage area

 Flexxaire™ Fan

 Fuel water separator

 312 US gallon fuel tank

 Dedicated fixed displacement pilot pump

 Dedicated variable displacement pumps for track and implement functions

 30 gpm variable displacement saw pump

 Cat® 325C swing drive and swing motor

 Electric hydraulic oil fill pump

 84 US gal hydraulic tank

 50% concentration extended life coolant

Operator Environment

 OPS/FOPS/ROPS cab

 Dual joystick control

 Reverse slope windshield

 Air ride seat

 Skylight - alternate escape hatch

 Top escape hatch

 3 inch retractable seat belt

 Heater/air conditioner w/climate control

 DIN mount radio ready with speakers

 Operator sound suppression to standards

 Travel alarm

 Cup holders (2)

 2-12 volt and 1-24 volt power outlets

 Front Window, 1.25 in Thick Margard

Powertrain

 C9 ACERT engine meets Tier 2 emissions requirements

 Infinitely variable travel speed

 Under hood centrifugal precleaner and primary air filter

 Heavy-duty cooling package

 Electric fuel priming pump

C9 ACERT engine meets Tier 2 emissions requirements

 24-volt electrical system

 2-12 volt maintenance free batteries

 95 Amp alternator

 IQAN programmable controls

 MDL large screen display

 Twin hydraulically actuated hinged engine enclosure with warning alarm

 Engine fan guard

 Bottom guards

 Isolation mounted cab and engine

 Heavy duty radiator guard door

 OPS/FOPS/ROPS cab

 Dual joystick control

 Reverse slope windshield

 Air ride seat

 Skylight - alternate escape hatch

 Top escape hatch

 3 inch retractable seat belt

 Heater/air conditioner w/climate control

 DIN mount radio ready with speakers

 Operator sound suppression to standards

 Travel alarm

 Cup holders (2)

 2-12 volt and 1-24 volt power outlets

 Front Window, 1.25 in Thick Margard

 C9 ACERT engine meets Tier 2 emissions requirements

 Infinitely variable travel speed

 Under hood centrifugal precleaner and primary air filter

 Heavy-duty cooling package

 Electric fuel priming pump

 Track roller guards with access holes

 Hydraulic track adjusters

 Double flange bottom rollers

 Caterpillar® 330 HEX bolted, non-leveling carbody, variable gauge

 Caterpillar 345 undercarriage bolted, variable gauge leveling carbody, GFT 110 final drives

 Vandalism protection

 Spare hose storage area

 Storage area

 Flexxaire™ Fan

 Fuel water separator

 312 US gallon fuel tank

 Dedicated fixed displacement pilot pump

 Dedicated variable displacement pumps for track and implement functions

 30 gpm variable displacement saw pump

 Cat® 325C swing drive and swing motor

 Electric hydraulic oil fill pump

 84 US gal hydraulic tank

 50% concentration extended life coolant

Infinitely variable travel speed

 24-volt electrical system

 2-12 volt maintenance free batteries

 95 Amp alternator

 IQAN programmable controls

 MDL large screen display

 Twin hydraulically actuated hinged engine enclosure with warning alarm

 Engine fan guard

 Bottom guards

 Isolation mounted cab and engine

 Heavy duty radiator guard door

 OPS/FOPS/ROPS cab

 Dual joystick control

 Reverse slope windshield

 Air ride seat

 Skylight - alternate escape hatch

 Top escape hatch

 3 inch retractable seat belt

 Heater/air conditioner w/climate control

 DIN mount radio ready with speakers

 Operator sound suppression to standards

 Travel alarm

 Cup holders (2)

 2-12 volt and 1-24 volt power outlets

 Front Window, 1.25 in Thick Margard

 C9 ACERT engine meets Tier 2 emissions requirements

 Infinitely variable travel speed

 Under hood centrifugal precleaner and primary air filter

 Heavy-duty cooling package

 Electric fuel priming pump

 Track roller guards with access holes

 Hydraulic track adjusters

 Double flange bottom rollers

 Caterpillar® 330 HEX bolted, non-leveling carbody, variable gauge

 Caterpillar 345 undercarriage bolted, variable gauge leveling carbody, GFT 110 final drives

 Vandalism protection

 Spare hose storage area

 Storage area

 Flexxaire™ Fan

 Fuel water separator

 312 US gallon fuel tank

 Dedicated fixed displacement pilot pump

 Dedicated variable displacement pumps for track and implement functions

 30 gpm variable displacement saw pump

 Cat® 325C swing drive and swing motor

 Electric hydraulic oil fill pump

 84 US gal hydraulic tank

 50% concentration extended life coolant

Under hood centrifugal precleaner and primary air filter

 24-volt electrical system

 2-12 volt maintenance free batteries

 95 Amp alternator

 IQAN programmable controls

 MDL large screen display

 Twin hydraulically actuated hinged engine enclosure with warning alarm

 Engine fan guard

 Bottom guards

 Isolation mounted cab and engine

 Heavy duty radiator guard door

 OPS/FOPS/ROPS cab

 Dual joystick control

 Reverse slope windshield

 Air ride seat

 Skylight - alternate escape hatch

 Top escape hatch

 3 inch retractable seat belt

 Heater/air conditioner w/climate control

 DIN mount radio ready with speakers

 Operator sound suppression to standards

 Travel alarm

 Cup holders (2)

 2-12 volt and 1-24 volt power outlets

 Front Window, 1.25 in Thick Margard

 C9 ACERT engine meets Tier 2 emissions requirements

 Infinitely variable travel speed

 Under hood centrifugal precleaner and primary air filter

 Heavy-duty cooling package

 Electric fuel priming pump

 Track roller guards with access holes

 Hydraulic track adjusters

 Double flange bottom rollers

 Caterpillar® 330 HEX bolted, non-leveling carbody, variable gauge

 Caterpillar 345 undercarriage bolted, variable gauge leveling carbody, GFT 110 final drives

 Vandalism protection

 Spare hose storage area

 Storage area

 Flexxaire™ Fan

 Fuel water separator

 312 US gallon fuel tank

 Dedicated fixed displacement pilot pump

 Dedicated variable displacement pumps for track and implement functions

 30 gpm variable displacement saw pump

 Cat® 325C swing drive and swing motor

 Electric hydraulic oil fill pump

 84 US gal hydraulic tank

 50% concentration extended life coolant

Heavy-duty cooling package

 24-volt electrical system

 2-12 volt maintenance free batteries

 95 Amp alternator

 IQAN programmable controls

 MDL large screen display

 Twin hydraulically actuated hinged engine enclosure with warning alarm

 Engine fan guard

 Bottom guards

 Isolation mounted cab and engine

 Heavy duty radiator guard door

 OPS/FOPS/ROPS cab

 Dual joystick control

 Reverse slope windshield

 Air ride seat

 Skylight - alternate escape hatch

 Top escape hatch

 3 inch retractable seat belt

 Heater/air conditioner w/climate control

 DIN mount radio ready with speakers

 Operator sound suppression to standards

 Travel alarm

 Cup holders (2)

 2-12 volt and 1-24 volt power outlets

 Front Window, 1.25 in Thick Margard

 C9 ACERT engine meets Tier 2 emissions requirements

 Infinitely variable travel speed

 Under hood centrifugal precleaner and primary air filter

 Heavy-duty cooling package

 Electric fuel priming pump

 Track roller guards with access holes

 Hydraulic track adjusters

 Double flange bottom rollers

 Caterpillar® 330 HEX bolted, non-leveling carbody, variable gauge

 Caterpillar 345 undercarriage bolted, variable gauge leveling carbody, GFT 110 final drives

 Vandalism protection

 Spare hose storage area

 Storage area

 Flexxaire™ Fan

 Fuel water separator

 312 US gallon fuel tank

 Dedicated fixed displacement pilot pump

 Dedicated variable displacement pumps for track and implement functions

 30 gpm variable displacement saw pump

 Cat® 325C swing drive and swing motor

 Electric hydraulic oil fill pump

 84 US gal hydraulic tank

 50% concentration extended life coolant

Electric fuel priming pump

 24-volt electrical system

 2-12 volt maintenance free batteries

 95 Amp alternator

 IQAN programmable controls

 MDL large screen display

 Twin hydraulically actuated hinged engine enclosure with warning alarm

 Engine fan guard

 Bottom guards

 Isolation mounted cab and engine

 Heavy duty radiator guard door

 OPS/FOPS/ROPS cab

 Dual joystick control

 Reverse slope windshield

 Air ride seat

 Skylight - alternate escape hatch

 Top escape hatch

 3 inch retractable seat belt

 Heater/air conditioner w/climate control

 DIN mount radio ready with speakers

 Operator sound suppression to standards

 Travel alarm

 Cup holders (2)

 2-12 volt and 1-24 volt power outlets

 Front Window, 1.25 in Thick Margard

 C9 ACERT engine meets Tier 2 emissions requirements

 Infinitely variable travel speed

 Under hood centrifugal precleaner and primary air filter

 Heavy-duty cooling package

 Electric fuel priming pump

 Track roller guards with access holes

 Hydraulic track adjusters

 Double flange bottom rollers

 Caterpillar® 330 HEX bolted, non-leveling carbody, variable gauge

 Caterpillar 345 undercarriage bolted, variable gauge leveling carbody, GFT 110 final drives

 Vandalism protection

 Spare hose storage area

 Storage area

 Flexxaire™ Fan

 Fuel water separator

 312 US gallon fuel tank

 Dedicated fixed displacement pilot pump

 Dedicated variable displacement pumps for track and implement functions

 30 gpm variable displacement saw pump

 Cat® 325C swing drive and swing motor

 Electric hydraulic oil fill pump

 84 US gal hydraulic tank

 50% concentration extended life coolant

Undercariage

 Track roller guards with access holes

 Hydraulic track adjusters

 Double flange bottom rollers

 Caterpillar® 330 HEX bolted, non-leveling carbody, variable gauge

 Caterpillar 345 undercarriage bolted, variable gauge leveling carbody, GFT 110 final drives

Other Standard Equipment

 Vandalism protection

 Spare hose storage area

 Storage area

 Flexxaire™ Fan

 Fuel water separator

 312 US gallon fuel tank

Vandalism protection

 24-volt electrical system

 2-12 volt maintenance free batteries

 95 Amp alternator

 IQAN programmable controls

 MDL large screen display

 Twin hydraulically actuated hinged engine enclosure with warning alarm

 Engine fan guard

 Bottom guards

 Isolation mounted cab and engine

 Heavy duty radiator guard door

 OPS/FOPS/ROPS cab

 Dual joystick control

 Reverse slope windshield

 Air ride seat

 Skylight - alternate escape hatch

 Top escape hatch

 3 inch retractable seat belt

 Heater/air conditioner w/climate control

 DIN mount radio ready with speakers

 Operator sound suppression to standards

 Travel alarm

 Cup holders (2)

 2-12 volt and 1-24 volt power outlets

 Front Window, 1.25 in Thick Margard

 C9 ACERT engine meets Tier 2 emissions requirements

 Infinitely variable travel speed

 Under hood centrifugal precleaner and primary air filter

 Heavy-duty cooling package

 Electric fuel priming pump

 Track roller guards with access holes

 Hydraulic track adjusters

 Double flange bottom rollers

 Caterpillar® 330 HEX bolted, non-leveling carbody, variable gauge

 Caterpillar 345 undercarriage bolted, variable gauge leveling carbody, GFT 110 final drives

 Vandalism protection

 Spare hose storage area

 Storage area

 Flexxaire™ Fan

 Fuel water separator

 312 US gallon fuel tank

 Dedicated fixed displacement pilot pump

 Dedicated variable displacement pumps for track and implement functions

 30 gpm variable displacement saw pump

 Cat® 325C swing drive and swing motor

 Electric hydraulic oil fill pump

 84 US gal hydraulic tank

 50% concentration extended life coolant

Spare hose storage area

 24-volt electrical system

 2-12 volt maintenance free batteries

 95 Amp alternator

 IQAN programmable controls

 MDL large screen display

 Twin hydraulically actuated hinged engine enclosure with warning alarm

 Engine fan guard

 Bottom guards

 Isolation mounted cab and engine

 Heavy duty radiator guard door

 OPS/FOPS/ROPS cab

 Dual joystick control

 Reverse slope windshield

 Air ride seat

 Skylight - alternate escape hatch

 Top escape hatch

 3 inch retractable seat belt

 Heater/air conditioner w/climate control

 DIN mount radio ready with speakers

 Operator sound suppression to standards

 Travel alarm

 Cup holders (2)

 2-12 volt and 1-24 volt power outlets

 Front Window, 1.25 in Thick Margard

 C9 ACERT engine meets Tier 2 emissions requirements

 Infinitely variable travel speed

 Under hood centrifugal precleaner and primary air filter

 Heavy-duty cooling package

 Electric fuel priming pump

 Track roller guards with access holes

 Hydraulic track adjusters

 Double flange bottom rollers

 Caterpillar® 330 HEX bolted, non-leveling carbody, variable gauge

 Caterpillar 345 undercarriage bolted, variable gauge leveling carbody, GFT 110 final drives

 Vandalism protection

 Spare hose storage area

 Storage area

 Flexxaire™ Fan

 Fuel water separator

 312 US gallon fuel tank

 Dedicated fixed displacement pilot pump

 Dedicated variable displacement pumps for track and implement functions

 30 gpm variable displacement saw pump

 Cat® 325C swing drive and swing motor

 Electric hydraulic oil fill pump

 84 US gal hydraulic tank

 50% concentration extended life coolant

Storage area

 24-volt electrical system

 2-12 volt maintenance free batteries

 95 Amp alternator

 IQAN programmable controls

 MDL large screen display

 Twin hydraulically actuated hinged engine enclosure with warning alarm

 Engine fan guard

 Bottom guards

 Isolation mounted cab and engine

 Heavy duty radiator guard door

 OPS/FOPS/ROPS cab

 Dual joystick control

 Reverse slope windshield

 Air ride seat

 Skylight - alternate escape hatch

 Top escape hatch

 3 inch retractable seat belt

 Heater/air conditioner w/climate control

 DIN mount radio ready with speakers

 Operator sound suppression to standards

 Travel alarm

 Cup holders (2)

 2-12 volt and 1-24 volt power outlets

 Front Window, 1.25 in Thick Margard

 C9 ACERT engine meets Tier 2 emissions requirements

 Infinitely variable travel speed

 Under hood centrifugal precleaner and primary air filter

 Heavy-duty cooling package

 Electric fuel priming pump

 Track roller guards with access holes

 Hydraulic track adjusters

 Double flange bottom rollers

 Caterpillar® 330 HEX bolted, non-leveling carbody, variable gauge

 Caterpillar 345 undercarriage bolted, variable gauge leveling carbody, GFT 110 final drives

 Vandalism protection

 Spare hose storage area

 Storage area

 Flexxaire™ Fan

 Fuel water separator

 312 US gallon fuel tank

 Dedicated fixed displacement pilot pump

 Dedicated variable displacement pumps for track and implement functions

 30 gpm variable displacement saw pump

 Cat® 325C swing drive and swing motor

 Electric hydraulic oil fill pump

 84 US gal hydraulic tank

 50% concentration extended life coolant

Flexxaire™ Fan

 24-volt electrical system

 2-12 volt maintenance free batteries

 95 Amp alternator

 IQAN programmable controls

 MDL large screen display

 Twin hydraulically actuated hinged engine enclosure with warning alarm

 Engine fan guard

 Bottom guards

 Isolation mounted cab and engine

 Heavy duty radiator guard door

 OPS/FOPS/ROPS cab

 Dual joystick control

 Reverse slope windshield

 Air ride seat

 Skylight - alternate escape hatch

 Top escape hatch

 3 inch retractable seat belt

 Heater/air conditioner w/climate control

 DIN mount radio ready with speakers

 Operator sound suppression to standards

 Travel alarm

 Cup holders (2)

 2-12 volt and 1-24 volt power outlets

 Front Window, 1.25 in Thick Margard

 C9 ACERT engine meets Tier 2 emissions requirements

 Infinitely variable travel speed

 Under hood centrifugal precleaner and primary air filter

 Heavy-duty cooling package

 Electric fuel priming pump

 Track roller guards with access holes

 Hydraulic track adjusters

 Double flange bottom rollers

 Caterpillar® 330 HEX bolted, non-leveling carbody, variable gauge

 Caterpillar 345 undercarriage bolted, variable gauge leveling carbody, GFT 110 final drives

 Vandalism protection

 Spare hose storage area

 Storage area

 Flexxaire™ Fan

 Fuel water separator

 312 US gallon fuel tank

 Dedicated fixed displacement pilot pump

 Dedicated variable displacement pumps for track and implement functions

 30 gpm variable displacement saw pump

 Cat® 325C swing drive and swing motor

 Electric hydraulic oil fill pump

 84 US gal hydraulic tank

 50% concentration extended life coolant

Fuel water separator

 24-volt electrical system

 2-12 volt maintenance free batteries

 95 Amp alternator

 IQAN programmable controls

 MDL large screen display

 Twin hydraulically actuated hinged engine enclosure with warning alarm

 Engine fan guard

 Bottom guards

 Isolation mounted cab and engine

 Heavy duty radiator guard door

 OPS/FOPS/ROPS cab

 Dual joystick control

 Reverse slope windshield

 Air ride seat

 Skylight - alternate escape hatch

 Top escape hatch

 3 inch retractable seat belt

 Heater/air conditioner w/climate control

 DIN mount radio ready with speakers

 Operator sound suppression to standards

 Travel alarm

 Cup holders (2)

 2-12 volt and 1-24 volt power outlets

 Front Window, 1.25 in Thick Margard

 C9 ACERT engine meets Tier 2 emissions requirements

 Infinitely variable travel speed

 Under hood centrifugal precleaner and primary air filter

 Heavy-duty cooling package

 Electric fuel priming pump

 Track roller guards with access holes

 Hydraulic track adjusters

 Double flange bottom rollers

 Caterpillar® 330 HEX bolted, non-leveling carbody, variable gauge

 Caterpillar 345 undercarriage bolted, variable gauge leveling carbody, GFT 110 final drives

 Vandalism protection

 Spare hose storage area

 Storage area

 Flexxaire™ Fan

 Fuel water separator

 312 US gallon fuel tank

 Dedicated fixed displacement pilot pump

 Dedicated variable displacement pumps for track and implement functions

 30 gpm variable displacement saw pump

 Cat® 325C swing drive and swing motor

 Electric hydraulic oil fill pump

 84 US gal hydraulic tank

 50% concentration extended life coolant

312 US gallon fuel tank

 24-volt electrical system

 2-12 volt maintenance free batteries

 95 Amp alternator

 IQAN programmable controls

 MDL large screen display

 Twin hydraulically actuated hinged engine enclosure with warning alarm

 Engine fan guard

 Bottom guards

 Isolation mounted cab and engine

 Heavy duty radiator guard door

 OPS/FOPS/ROPS cab

 Dual joystick control

 Reverse slope windshield

 Air ride seat

 Skylight - alternate escape hatch

 Top escape hatch

 3 inch retractable seat belt

 Heater/air conditioner w/climate control

 DIN mount radio ready with speakers

 Operator sound suppression to standards

 Travel alarm

 Cup holders (2)

 2-12 volt and 1-24 volt power outlets

 Front Window, 1.25 in Thick Margard

 C9 ACERT engine meets Tier 2 emissions requirements

 Infinitely variable travel speed

 Under hood centrifugal precleaner and primary air filter

 Heavy-duty cooling package

 Electric fuel priming pump

 Track roller guards with access holes

 Hydraulic track adjusters

 Double flange bottom rollers

 Caterpillar® 330 HEX bolted, non-leveling carbody, variable gauge

 Caterpillar 345 undercarriage bolted, variable gauge leveling carbody, GFT 110 final drives

 Vandalism protection

 Spare hose storage area

 Storage area

 Flexxaire™ Fan

 Fuel water separator

 312 US gallon fuel tank

 Dedicated fixed displacement pilot pump

 Dedicated variable displacement pumps for track and implement functions

 30 gpm variable displacement saw pump

 Cat® 325C swing drive and swing motor

 Electric hydraulic oil fill pump

 84 US gal hydraulic tank

 50% concentration extended life coolant

Hydraulics

 Dedicated fixed displacement pilot pump

 Dedicated variable displacement pumps for track and implement functions

 30 gpm variable displacement saw pump

 Cat® 325C swing drive and swing motor

 Electric hydraulic oil fill pump

 84 US gal hydraulic tank

Antifreeze

 50% concentration extended life coolant

Electrical

24-volt electrical system

2-12 volt maintenance free batteries

95 Amp alternator

IQAN programmable controls

MDL large screen display

Guards

Twin hydraulically actuated hinged engine enclosure with warning alarm

Engine fan guard

Bottom guards

Isolation mounted cab and engine

Heavy duty radiator guard door

Operator Environment

OPS/FOPS/ROPS cab

Dual joystick control

Reverse slope windshield

Air ride seat

Skylight - alternate escape hatch

Top escape hatch

3 inch retractable seat belt

Heater/air conditioner w/climate control

DIN mount radio ready with speakers

Operator sound suppression to standards

Travel alarm

Cup holders (2)

2-12 volt and 1-24 volt power outlets

Front Window, 1.25 in Thick Margard

Powertrain

C9 ACERT engine meets Tier 2 emissions requirements

Infinitely variable travel speed

Under hood centrifugal precleaner and primary air filter

Heavy-duty cooling package

Electric fuel priming pump

Undercariage

Track roller guards with access holes

Hydraulic track adjusters

Double flange bottom rollers

Caterpillar® 330 HEX bolted, non-leveling carbody, variable gauge

Caterpillar 345 undercarriage bolted, variable gauge leveling carbody, GFT 110 final drives

Other Standard Equipment

Vandalism protection

Spare hose storage area

Storage area

Flexxaire™ Fan

Fuel water separator

312 US gallon fuel tank

Hydraulics

Dedicated fixed displacement pilot pump

Dedicated variable displacement pumps for track and implement functions

30 gpm variable displacement saw pump

Cat® 325C swing drive and swing motor

Electric hydraulic oil fill pump

84 US gal hydraulic tank

Antifreeze

50% concentration extended life coolant

Track Systems

 24" SG pads, clipped corners, with mud/snow reliefs

 28" SG pads, clipped corners, with mud/snow reliefs

 Star carrier Rollers

 Standard Single Flange carrier Rollers

24" SG pads, clipped corners, with mud/snow reliefs

28" SG pads, clipped corners, with mud/snow reliefs

Star carrier Rollers

Standard Single Flange carrier Rollers

Other Equipment

 Starting Aid, Cold Weather

 Starting Aid, Arctic - Includes engine and hydraulic heaters

Field Installed Attachments

 CD Player with AM/FM Stereo - remote capable

 Skylight, peaked, removable

 Loose Linkage Arrangements

Track Systems

24" SG pads, clipped corners, with mud/snow reliefs

28" SG pads, clipped corners, with mud/snow reliefs

Star carrier Rollers

Standard Single Flange carrier Rollers

Other Equipment

Starting Aid, Cold Weather

Starting Aid, Arctic - Includes engine and hydraulic heaters

Field Installed Attachments

CD Player with AM/FM Stereo - remote capable

Skylight, peaked, removable

Loose Linkage Arrangements