MD6240 Rotary Drill

Specifications

Bit Load	24 000 kg (52,911 lb)
Hole Diameter	152-244 mm (6-9.625 in)
Engine	C27 (Tier 2) – 597 kW (800 hp) at 2,100 rpm
Compressor	48 m³/min (1,700 ft³/min) 6.9 bar (100 psi)
Engine Cat® C27 Tier 2	597 kW (800 hp) at 2,100 rpm
Hole Depth Single-pass (12 m/39 ft mast)	Up to 12.80 m (42 ft)/Multi-pass Up to 55.47 m (182 ft)
Hole Depth Single-pass (15 m/49 ft mast)	Up to 15.85 m (52 ft)/Multi-pass Up to 31.08 m (102 ft)

Rotary Drive System

Horsepower capacity	135 kW
Torque	0-13 015 N·m (0-9,600 ft-lb)

Engine (Standard) – C27 Tier 2

Rated horsepower	597 kW
Fuel tank	2986 L
Manufacturer	Caterpillar
Model	C27 Tier 2
Optional rated horsepower	652 kW

Undercarriage

Brakes	Spring set, hydraulic release
Front axle	Three-point oscillating type
Gradeability mast down	48%/25.6 degrees
Maximum drive horsepower per track	152.0 kW
Number of lower rollers	12
Rock guards/chain guides	Standard full-length guards
Tram speed maximum	2.0 km/h

Compressor (Standard)

Discharge air flow (sea level)	48 m3/min
Maximum operating pressure	6.9 bar
Type	Oil-flooded, single-stage screw

Operator’s Cab

Climate control	Wall-mounted, AC/heating/pressurizing unit
Floor area	3.0 m2
Height inside	1943.0 mm
Number of doors	2 with windows (included above)
Number of windows	10
Other	Window wipers and washers
Type	Shock-mounted; two-man, integrated FOPS certified
Windows (tinted safety glass in rubber mounting)	6.0 mm

Winch System

Cable size	13.0 mm
Rating	1587 kg

Rated Capacity

Bit/hole diameter	152-244 mm (6-9.625 in)
Depth multi-pass (12 m/39 ft mast)	Up to 55.47 m (Up to 182 ft)
Depth single-pass (15 m/49 ft mast)	Up to 15.85 m (Up to 52 ft)

Operating Temperature

Cold weather option	-40.0 ° C
Maximum ambient rating (standard)	52.0 ° C
Minimum ambient rating (standard)	-1 ° C

Mainframe

Jacks, mast pivot and deck	Welded integrally to mainframe
Machine deck	Access both sides

Dust Suppression

Dust collector capacity

127 m3/min

Mainframe – Leveling Jacks

Lift capacity	290 kN
Number	4
Pad diameter	610 mm

Pipe Rack (outside the mast)

12 m (39 ft) mast arrangement	4 pods; 10.67 m (35 ft) long pipe
15 m (49 ft) mast arrangement	2 pods; 7.62 m (25 ft) long pipe
Type	Carousel, with stationary pods and breaker plates

Pull-down/Hoisting Capacity

Automatic cable	Hydraulic cylinder, tensioning
Cable type – 25 mm (1 in)	DYFORM 8
Drilling feed/retract rate	0-39.3 m/min (0-129 ft/min)
Head travel (12 m/39 ft)	14.54 m
Head travel (15 m/49 ft)	17.60 m
Rated hoist capacity	Up to 222 kN (Up to 50,000 lbf)
Rated pull-down capacity	Up to 222 kN (Up to 50,000 lbf)

Compressor (Optional)

Discharge air flow (sea level)	33 m3/min (1,150 ft3/min); 38 m3/min (1,350 ft3/min); 43 m3/min (1,500 ft3/min)
Maximum operating pressure	10.3/24.1 bar or 10.3/24.1/34.5 bar (150/350 psi or 150/350/500 psi)
Type (high pressure)	Oil-flooded, two-stage screw

Drill Table and Work Deck

Table height off ground

1321.0 mm

Solid Structures

To withstand your harsh quarry and mining environments

Best built for long life, the MD6240 has heavy-duty structures. The mast, integral A-frame, and mainframe are durable providing a strong platform needed for drilling in harsh conditions. The MD6240 is equipped to perform in challenging environments and provides high availability, positively impacting your bottom line. All welded structures comply with AWS 14.3 welding standard. The welded structures are inspected after the manufacturing process providing reliable, maintenance free and long lasting platform for the drill.

Sturdy Mast

• The mast is made of heavy-duty ASTM A500 Grade B steel tubing on all four chords and cross members, which creates a torsionally strong mast structure and reduces the material fatigue.
• All mast structures are designed with double-cut lacing in high stress areas to prevent cracking and assure long life.
• The mast can be raised or lowered with full pipe rack and full drill string on the rotary head, in less than 40 seconds.

Heavy-Duty Frame

• The A-frame is an integral extension of the mainframe, providing a strong, low maintenance design.
• The mainframe design assures structural integrity. The main rails, made of ASTM A500, Grade B, rectangular steel tubing, are heavily cross-braced and reinforced in high stress areas.

Undercarriage

• Three point oscillating suspension allows the drill to negotiate rugged, uneven terrain without transferring excessive torsional forces to the mainframe, and allows continued stability while tramming between holes.
• Tram speed is 2.0 km/h (1.25 mph). Gradeability is 48% with the mast down.
• Ground clearance: 610 mm (24 in)
• Bearing ground pressure: 0.83 bar (12 psi)

Power Group

High on efficiency; low on cost

To achieve low cost, high efficiency drilling, your power group configuration is selected to match the needs of your specific geology and site conditions. We have numerous configurations for low pressure rotary drilling or high pressure DTH hammer drilling. Power groups are arranged in-line for easy access, from both sides, to the engine, compressor, hydraulic pumps, plumbing and other components, which translates into safer serviceability and lower maintenance cost.

Engines

To match your application demands, MD6240 has three choices for engine sizes. Cat C27 ACERT™ @ 597 and 652 kW (800 and 875 hp) @ 2,100 rpm. Each package includes:

• Fuel-filtration package to overcome harsh mining environments
• Pre-lube system for extra engine protection
• Dry type inlet air cleaner with safety elements
• Heavy duty muffler and muffler guard
• Manifold blanket covers
• Set of batteries
• Coolant conditioner
• Fuel tank

Compressor

For efficient flushing of cuttings and dust out of the bore hole, the air compressor delivers the right amount of bailing air based on hole diameter, depth and material density. Air-on-demand control system regulates air intake to match the amount of compressed air being used.

Standard Compressor is Low Pressure for Rotary Drilling Mode

• Single stage, positive displacement, oil-flooded, single-stage screw type compressor
• Discharge air flow (sea level) 48 m3/min (1,700 ft3/min)
• Maximum operating pressure 6.9 bar (100 psi)

Optional Compressor is High Pressure for DTH Hammer Drilling Mode

• High pressure, oil-flooded, two-stage screw type
• Discharge air flow (sea level) 33 m3/min (1,150 ft3/min); 38 m3/min (1,350 ft3/min); 43 m3/min (1,500 ft3/min)
• Maximum operating pressure 10.3/24.1/34.5 bar (150/350/500 psi)

Cooler

For ample capability, our cooler systems are designed to assure unrestricted airflow and reduce excessive operating heat, which extends life of engine, compressor, and hydraulic components.

• Rated up to 52° C (125° F) ambient cooling capacity
• Split cooler
• Engine radiator
• Charge air cooler section
• Hydraulic oil cooler section
• Compressor oil section
• Replaceable cores
• Fan arrangements are suited to the powertrain configuration
• Mounted on an isolated skid to reduce vibration, limit load transfer and noise

Hydraulic System

The pump drive is powered by direct input from the engine using a maintenance free rubber mounted coupling. The result is a longer power train life as less shock is absorbed. The coupling housing is fully enclosed with a hinged access hatch for visual inspection.

Hydraulic Pump Drive

• Two axial piston pumps for the pulldown and rotation systems or track propel functions.
• One axial piston pump for the cooling fans and auxiliary functions.
• Two gear pumps supply power to the dust collector and water injection systems.

Mast System

Strong and sturdy

To assure long life, all mast structures are designed with double-cut lacing in high stress areas. There are several application-specific masts to choose from.

Pulldown and Hoist

A single, double-acting cylinder, cable pull-down system produces 22 680 kg (50,000 lb) of pull-down force and 22 680 kg (50,000 lb) of hoist force. The cylinder rod is fixed on both ends with a moving barrel, providing high efficiency and reducing feed system wear and maintenance.

• One variable displacement axial piston pump in an open loop system
• Bit load up to 24 000 kg (52,911 lb)
• Feed and hoist speed 0-39 m/min (0-129 ft/min)
• Weight on bit feed hold back control system

Cables

The MD6240 drill is designed with mast cables instead of chains. Cables have a predictable wear profile and do not unexpectedly fail. They can be repaired quickly and easily, and they absorb and evenly dissipate vibrations, which promotes longer mast life.

Auto Tensioning

A cable auto-tensioner ensures maximum cable service life with minimum maintenance by automatically keeping cables tight via a series of hydraulic cylinders applying constant pressure. Cables for the MD6420 are 2.85 cm (1 in) in diameter, and rated at 62.8 tons (138,450 lb) nominal strength.

Rotary Drill Head (1)

Achieve optimal penetration rates with the ability to select the most suitable rotation speed for your application. One fixed displacement, axial piston motor provides 139 kW (186 hp) with rotation speed 0-220 rpm. Torque reaches 13 015 N?m (9,600 lbf-ft) with variable control. Heavy-duty, reliable drill head includes a 140 mm (5.5 in) bull-shaft connection to the drill string and has adjustable steel guides with replaceable pads for even travel on main chords. The long head carriage design ensures the rotary head rides the main chords evenly.

Angle Drilling

The MD6240 can drill in angles up to 25 degrees (in 5 degree increments). Dual mast locks are located above the deck and hydraulically operated dust curtains are available for angle drilling.

Pipe Rack Carousel (2)

The hydraulically operated carousel-type pipe changer is located outside of the mast structure, and all functions are controlled from a console in operator’s cab, which assures efficient and safe drill string changes and storage. The carousel provides automatic indexing of drill pipes in relation to the rotary head.

• Pipe diameter 114-178 mm (4.5-7.0 in)
• 12 m (39 ft) mast arrangement 4 pods; 10.67 m (35 ft) long pipe
• 15 m (49 ft) mast arrangement 2 pods; 15.24 m (50 ft)/two 7.62 m (25 ft) long pipe

Pipe Positioner

To help you align the pipe string while adding or detaching pipes, or in angle hole drilling, our automatic pipe positioner, hydraulically activates to guide the pipe straight through the deck bushing.

Hammer/Tricone Pipe Rack

To accommodate differences in rock consistency, a patented Hammer/Tricone Pipe Rack allows for rapid conversion between tricone drilling for soft drilling conditions, and DTH drilling, for hard rock, in less than five minutes.

Hydraulically Operated Break Out and Deck Wrench (3)

Adding to your productivity the HOBO works in concert with a highly effective deck wrench.

• Mounted on the outside mast structure
• Four-cylinder system for swing-adjust-rotate-clamp
• Operated from inside the cab

Overhead Winch

To assist in safe and efficient handling of drill pipes, bits, subs and other heavy accessories, there is an auxiliary winch system with capacity to hoist up to 1587 kg (3,500 lb) capacity. Operation is from the operator’s cab, or optional remote control.

Dust Collection

Largest chamber in the industry

For efficient dust collection MD6240 has a dust collector rated at 127 m3/min (4,500 ft3/min) and separate water injection system. Both dry and water injection systems can be mounted on the same drill.

• Water injection system options: – Three tanks totaling 1271 L (336 gal) mounted under the front deck or – One tank 1514 L (400 gal) mounted on top-deck (mounted in place of Dry Dust Collector)

Dust Curtain

With the largest dust chamber in the industry, the MD6240 has a total enclosed area of 4.17 m2 (44.89 ft2) and is surrounded by heavy rubber curtains. This provides ample space for dust containment while deep hole drilling and the resulting cutting piles. Optional hydraulic front and rear dust curtain lifters are available to ensure cuttings are not pulled back into the hole while tramming from point to point on the blast pattern.

• Material 6 mm (0.25 in) rubber nylon reinforced
• Split for excess with 305 mm (12 in) overlap
• Dust deflector is a natural rubber seal, 13 mm (0.5 in) thick, 356 mm (14 in) diameter

Fully Equipped Cab

For operator safety and comfort

Safe and Effortless Operation

To limit operator fatigue the MD6240 controls are ergonomic. The FOPS certified cab has tinted safety glass windows and a closed circuit camera system for 360° visibility. Two heavy-duty doors provide quick egress to the drill table or the main deck.

Additional Safety Features

• 45° control console, in relation to deck, assures good overview of drill table
• Closed-circuit camera system
• Two heavy-duty swing doors for convenient cab access
• Low sound and vibration levels
• Emergency ingress/egress
• Multiple engine stops
• Four leveling jacks ensure a minimum of three machine points of ground contact at all times
• The pipe handling system is designed so breaker plate is located at operator’s eye level
• All auxiliary functions are controlled by fingertip toggle switches and marked with “no language barrier” symbols describing each function
• Fixed folding trainers seat
• Window washers and wipers

Spacious and Quiet Cab

For comfortable and efficient operation, the MD6240 cab offers operators 3 m2 (32 ft2) of floor area allowing ample room with a swiveling operator’s seat equipped with armrests and a headrest. The ergonomic console provides well organized controls labeled with international ISO symbols for each function. The cab is shock mounted and insulated for quiet operation below 80 dB(A). Heated and air conditioned, operator comfort is attainable in all climates.

Serviceability and Customer Support

Easy and safe to access all service points

Supported by World-class Cat Dealer Network

With the support of the Cat global dealer network, you can rely on unmatched service, integrated solutions, after-sales support, fast and efficient parts fulfillment, and world-class remanufacturing capabilities. The Cat Parts and Service Network offers you the most comprehensive product support system in the industry. Everything we do is designed to keep you up and running longer, for less. Cat authorized and certified mechanics are trained in the latest diagnostic equipment, tools and service techniques. They know exactly what to look for, and exactly how to fix it. One of the prime cornerstones of the Cat Parts and Service Network is availability. No matter where you are, no matter what day of the week or time of day, Cat Parts and Service is never far away. At each location, you have instant access to everything from information on maintenance options, engine selection and repair, to a full range of genuine Cat Parts and Remanufactured components. The fact is, a vast majority of the parts you'll ever need are on hand at your local dealer, right off the shelf. And in the rare event a specific part is not on hand, your dealer can usually get it to you within 24 hours, utilizing our computerized parts location network. From helping you choose the right machine to knowledgeable ongoing support, Cat dealers provide the best in sales and service.

• Preventive maintenance programs and guaranteed maintenance contracts
• Best-in-class parts availability
• Operator training to help boost your production
• Genuine Cat Remanufactured parts

Large Main Deck

The MD6240 large deck (front and rear) plus wide walkways assure a safe operating area and more efficient maintenance. Access to walkways are on both sides of drill for quick access to all major components for daily pre-start checks, preventive maintenance and adjustments. The stationary drill table/rear deck (mast/cab area) provides access to the mast area and to the main deck during all drilling modes, including angle drilling. Immediate access to the power group including the engine, compressor, hydraulic pumps, plumbing and other components, translates into better serviceability and lower maintenance cost.

Safety

Because it’s your priority

We know keeping operators safe is a priority. Throughout Cat Drills you will find features that are designed to do just that.

• Operators are comfortable, more productive and safe in our spacious and quiet cab
• Cab is FOPS certified with tinted safety glass windows and a closed circuit camera system for 360° visibility
• The Carousel Pipe Rack is controlled from inside of operator’s cab
• A hydraulic break out wrench and deck wrench assist in breaking thread connections from inside the cab
• Three point oscillating suspension allows the drill to negotiate rugged, uneven terrain without transferring excessive torsional forces to the mainframe, and allows continued stability while tramming between holes
• Power groups are arranged in-line for easy access, from both sides, to the engine, compressor, hydraulic pumps, plumbing and other components, which translates into safer serviceability
• Mast uses cables which have a predictable wear profile and do not unexpectedly fail like chains
• An auxiliary winch system for up to 1587 kg (3,500 lb) capacity, assists in handling of drill pipes, bits, subs and other heavy accessories and equipment from the cab or via remote control
• Two heavy-duty doors provide quick ingress/egress from cab to the drill table or the main deck
• Ground-level machine isolation and lock out box
• Multiple engine stops
• Four leveling jacks ensure a minimum of three machine points of ground contact at all times

Sustainability

Using resources wisely

Sustainable development for Caterpillar means leveraging technology and innovation to increase efficiency and productivity with less impact on the environment and helping you do the same - enabling your businesses to become more productive by providing products, services and solutions that use resources more efficiently.

Engines with Advanced Technology

Cat ACERT engines with advanced technology have lower emissions without compromising performance or fuel efficiency.

Extended Life

Mast structure is designed for long life and is a base for major overhauling and continued use after standard operational life. Jack casing structures, A-frame/mast pivot and the deck are integrally welded to the mainframe assuring a sound structural base with the ability to be rebuilt.

Sustainability Features

Fuel savings is achieved with our variable speed fans that match cooling demand. The coolers have replaceable cores. The pump drive is powered by direct input from the engine using a maintenance free rubber mounted coupling. The result is a longer power train life as less shock is absorbed.

CAPABILITY

 The MD6240 is designed to drill from 152-244 mm (6-9.625 in) diameter holes with rated pulldown and hoist capacity up to 22 680 kg (50,000 lb), in Rotary or Down the Hole applications.

ENGINE

 Metal turbo and exhaust manifold covers

 Engine pre-lube

 Additional filtration

 Coolant conditioner

Metal turbo and exhaust manifold covers

 The MD6240 is designed to drill from 152-244 mm (6-9.625 in) diameter holes with rated pulldown and hoist capacity up to 22 680 kg (50,000 lb), in Rotary or Down the Hole applications.

 Metal turbo and exhaust manifold covers

 Engine pre-lube

 Additional filtration

 Coolant conditioner

 152-270 mm (6-105⁄8 in) hole diameter

 Up to 22 680 kg (50,000 lb) rated single cylinder pulldown/hoist system

 Up to 24 000 kg (52,911 lb) bit load with one pipe in the drill string

 Patented HOBO (Hydraulically Operated Break-Out) wrench operated from the cab

 Auto cable tensioning system

 25° angle drilling package and mast locks

 Winch system 1587 kg (3,500 lb) capacity

 Single motor

 Rotation speed 0-100 rpm

 Up to 13 016 N·m (9,600 ft-lb) torque

 Integrated FOPS

 Totally enclosed, insulated, two-man cab

 Two (2) hinged doors with heavy duty freezer type door latch system

 Ten (10) windows (safety glass, tinted)

 Windshield wiper and washer kit

 Electric over hydraulic drill functions

 Auxiliary functions operated by fingertip toggle switches

 More than 3 m2 (32.4 ft2) of floor space

 Excellent visibility

 dB rating of 80 or less

 Wall mounted air conditioner/heater/pressurizer, belt driven

 Rubber shock-mounts to absorb vibration

 Electric horn activated by push button in the cab

 Gel cell maintenance free battery

 Document holder inside the cab

 Excavator type, with 12 lower rollers

 750 mm (29.5 in) triple grousers

 Full length chain guides/rock guards

 Made of heavily cross-braced rectangular steel tubing

 Rear deck is stationary during both angle and vertical drilling modes

 Viewing hatch in rear deck, hydraulically operated from cab to help spotting holes

 Four (4) hydraulic leveling jacks (152 cm/60 in)

 Dust chamber clean-out door

 Centralized lubrication system (34 points)

 Additional mast rests mounted on non-drill end

 1325 L (350 gal) fuel tank under engine: - Additional fuel tank available as option

 1570 L (415 gal) additional fuel tank under compressor

 4 × 8D batteries

 Hydraulically operated from the cab

 Maximum ambient cooling capacity of 52° C (125° F) with replaceable cores

 Two (2) variable displacement axial piston pumps, in closed loop system, that operate the drill rotation, pulldown/hoist system, and tram functions

 Double-gear pump, in open loop system, for all auxiliary functions and fan circuit

 Dual filtration

 Top sub adapter

 Table bushing

 Bit sub [note: 12 m/39 ft configuration: 342 cm (135 in) S-S, 15 m/49 ft configuration: 152 cm (60 in) S-S]

 Horseshoe bushing

 Bit basket

 Hoist plug (lifting bail)

 Auto tool wrench/deck wrench

 See Optional Equipment and select the required system

 Standard Caterpillar Colors

 Backup alarm

 Filter kit for 50-hour preventive maintenance

 Two (2) hard copy sets Operator/Service/Maintenance/Parts/Engine manuals, in English

 One Link-One Parts manual on CD, Operator and Service manual in pdf

 Seven (7) 60-watt LED lights for night drilling

 Side walkways and handrails with side boarding ladder

 Tool box, mounted under walkway (tools not included)

 Lift kit

 Towing hooks (front end)

 Battery disconnect

Engine pre-lube

 The MD6240 is designed to drill from 152-244 mm (6-9.625 in) diameter holes with rated pulldown and hoist capacity up to 22 680 kg (50,000 lb), in Rotary or Down the Hole applications.

 Metal turbo and exhaust manifold covers

 Engine pre-lube

 Additional filtration

 Coolant conditioner

 152-270 mm (6-105⁄8 in) hole diameter

 Up to 22 680 kg (50,000 lb) rated single cylinder pulldown/hoist system

 Up to 24 000 kg (52,911 lb) bit load with one pipe in the drill string

 Patented HOBO (Hydraulically Operated Break-Out) wrench operated from the cab

 Auto cable tensioning system

 25° angle drilling package and mast locks

 Winch system 1587 kg (3,500 lb) capacity

 Single motor

 Rotation speed 0-100 rpm

 Up to 13 016 N·m (9,600 ft-lb) torque

 Integrated FOPS

 Totally enclosed, insulated, two-man cab

 Two (2) hinged doors with heavy duty freezer type door latch system

 Ten (10) windows (safety glass, tinted)

 Windshield wiper and washer kit

 Electric over hydraulic drill functions

 Auxiliary functions operated by fingertip toggle switches

 More than 3 m2 (32.4 ft2) of floor space

 Excellent visibility

 dB rating of 80 or less

 Wall mounted air conditioner/heater/pressurizer, belt driven

 Rubber shock-mounts to absorb vibration

 Electric horn activated by push button in the cab

 Gel cell maintenance free battery

 Document holder inside the cab

 Excavator type, with 12 lower rollers

 750 mm (29.5 in) triple grousers

 Full length chain guides/rock guards

 Made of heavily cross-braced rectangular steel tubing

 Rear deck is stationary during both angle and vertical drilling modes

 Viewing hatch in rear deck, hydraulically operated from cab to help spotting holes

 Four (4) hydraulic leveling jacks (152 cm/60 in)

 Dust chamber clean-out door

 Centralized lubrication system (34 points)

 Additional mast rests mounted on non-drill end

 1325 L (350 gal) fuel tank under engine: - Additional fuel tank available as option

 1570 L (415 gal) additional fuel tank under compressor

 4 × 8D batteries

 Hydraulically operated from the cab

 Maximum ambient cooling capacity of 52° C (125° F) with replaceable cores

 Two (2) variable displacement axial piston pumps, in closed loop system, that operate the drill rotation, pulldown/hoist system, and tram functions

 Double-gear pump, in open loop system, for all auxiliary functions and fan circuit

 Dual filtration

 Top sub adapter

 Table bushing

 Bit sub [note: 12 m/39 ft configuration: 342 cm (135 in) S-S, 15 m/49 ft configuration: 152 cm (60 in) S-S]

 Horseshoe bushing

 Bit basket

 Hoist plug (lifting bail)

 Auto tool wrench/deck wrench

 See Optional Equipment and select the required system

 Standard Caterpillar Colors

 Backup alarm

 Filter kit for 50-hour preventive maintenance

 Two (2) hard copy sets Operator/Service/Maintenance/Parts/Engine manuals, in English

 One Link-One Parts manual on CD, Operator and Service manual in pdf

 Seven (7) 60-watt LED lights for night drilling

 Side walkways and handrails with side boarding ladder

 Tool box, mounted under walkway (tools not included)

 Lift kit

 Towing hooks (front end)

 Battery disconnect

Additional filtration

 The MD6240 is designed to drill from 152-244 mm (6-9.625 in) diameter holes with rated pulldown and hoist capacity up to 22 680 kg (50,000 lb), in Rotary or Down the Hole applications.

 Metal turbo and exhaust manifold covers

 Engine pre-lube

 Additional filtration

 Coolant conditioner

 152-270 mm (6-105⁄8 in) hole diameter

 Up to 22 680 kg (50,000 lb) rated single cylinder pulldown/hoist system

 Up to 24 000 kg (52,911 lb) bit load with one pipe in the drill string

 Patented HOBO (Hydraulically Operated Break-Out) wrench operated from the cab

 Auto cable tensioning system

 25° angle drilling package and mast locks

 Winch system 1587 kg (3,500 lb) capacity

 Single motor

 Rotation speed 0-100 rpm

 Up to 13 016 N·m (9,600 ft-lb) torque

 Integrated FOPS

 Totally enclosed, insulated, two-man cab

 Two (2) hinged doors with heavy duty freezer type door latch system

 Ten (10) windows (safety glass, tinted)

 Windshield wiper and washer kit

 Electric over hydraulic drill functions

 Auxiliary functions operated by fingertip toggle switches

 More than 3 m2 (32.4 ft2) of floor space

 Excellent visibility

 dB rating of 80 or less

 Wall mounted air conditioner/heater/pressurizer, belt driven

 Rubber shock-mounts to absorb vibration

 Electric horn activated by push button in the cab

 Gel cell maintenance free battery

 Document holder inside the cab

 Excavator type, with 12 lower rollers

 750 mm (29.5 in) triple grousers

 Full length chain guides/rock guards

 Made of heavily cross-braced rectangular steel tubing

 Rear deck is stationary during both angle and vertical drilling modes

 Viewing hatch in rear deck, hydraulically operated from cab to help spotting holes

 Four (4) hydraulic leveling jacks (152 cm/60 in)

 Dust chamber clean-out door

 Centralized lubrication system (34 points)

 Additional mast rests mounted on non-drill end

 1325 L (350 gal) fuel tank under engine: - Additional fuel tank available as option

 1570 L (415 gal) additional fuel tank under compressor

 4 × 8D batteries

 Hydraulically operated from the cab

 Maximum ambient cooling capacity of 52° C (125° F) with replaceable cores

 Two (2) variable displacement axial piston pumps, in closed loop system, that operate the drill rotation, pulldown/hoist system, and tram functions

 Double-gear pump, in open loop system, for all auxiliary functions and fan circuit

 Dual filtration

 Top sub adapter

 Table bushing

 Bit sub [note: 12 m/39 ft configuration: 342 cm (135 in) S-S, 15 m/49 ft configuration: 152 cm (60 in) S-S]

 Horseshoe bushing

 Bit basket

 Hoist plug (lifting bail)

 Auto tool wrench/deck wrench

 See Optional Equipment and select the required system

 Standard Caterpillar Colors

 Backup alarm

 Filter kit for 50-hour preventive maintenance

 Two (2) hard copy sets Operator/Service/Maintenance/Parts/Engine manuals, in English

 One Link-One Parts manual on CD, Operator and Service manual in pdf

 Seven (7) 60-watt LED lights for night drilling

 Side walkways and handrails with side boarding ladder

 Tool box, mounted under walkway (tools not included)

 Lift kit

 Towing hooks (front end)

 Battery disconnect

Coolant conditioner

 The MD6240 is designed to drill from 152-244 mm (6-9.625 in) diameter holes with rated pulldown and hoist capacity up to 22 680 kg (50,000 lb), in Rotary or Down the Hole applications.

 Metal turbo and exhaust manifold covers

 Engine pre-lube

 Additional filtration

 Coolant conditioner

 152-270 mm (6-105⁄8 in) hole diameter

 Up to 22 680 kg (50,000 lb) rated single cylinder pulldown/hoist system

 Up to 24 000 kg (52,911 lb) bit load with one pipe in the drill string

 Patented HOBO (Hydraulically Operated Break-Out) wrench operated from the cab

 Auto cable tensioning system

 25° angle drilling package and mast locks

 Winch system 1587 kg (3,500 lb) capacity

 Single motor

 Rotation speed 0-100 rpm

 Up to 13 016 N·m (9,600 ft-lb) torque

 Integrated FOPS

 Totally enclosed, insulated, two-man cab

 Two (2) hinged doors with heavy duty freezer type door latch system

 Ten (10) windows (safety glass, tinted)

 Windshield wiper and washer kit

 Electric over hydraulic drill functions

 Auxiliary functions operated by fingertip toggle switches

 More than 3 m2 (32.4 ft2) of floor space

 Excellent visibility

 dB rating of 80 or less

 Wall mounted air conditioner/heater/pressurizer, belt driven

 Rubber shock-mounts to absorb vibration

 Electric horn activated by push button in the cab

 Gel cell maintenance free battery

 Document holder inside the cab

 Excavator type, with 12 lower rollers

 750 mm (29.5 in) triple grousers

 Full length chain guides/rock guards

 Made of heavily cross-braced rectangular steel tubing

 Rear deck is stationary during both angle and vertical drilling modes

 Viewing hatch in rear deck, hydraulically operated from cab to help spotting holes

 Four (4) hydraulic leveling jacks (152 cm/60 in)

 Dust chamber clean-out door

 Centralized lubrication system (34 points)

 Additional mast rests mounted on non-drill end

 1325 L (350 gal) fuel tank under engine: - Additional fuel tank available as option

 1570 L (415 gal) additional fuel tank under compressor

 4 × 8D batteries

 Hydraulically operated from the cab

 Maximum ambient cooling capacity of 52° C (125° F) with replaceable cores

 Two (2) variable displacement axial piston pumps, in closed loop system, that operate the drill rotation, pulldown/hoist system, and tram functions

 Double-gear pump, in open loop system, for all auxiliary functions and fan circuit

 Dual filtration

 Top sub adapter

 Table bushing

 Bit sub [note: 12 m/39 ft configuration: 342 cm (135 in) S-S, 15 m/49 ft configuration: 152 cm (60 in) S-S]

 Horseshoe bushing

 Bit basket

 Hoist plug (lifting bail)

 Auto tool wrench/deck wrench

 See Optional Equipment and select the required system

 Standard Caterpillar Colors

 Backup alarm

 Filter kit for 50-hour preventive maintenance

 Two (2) hard copy sets Operator/Service/Maintenance/Parts/Engine manuals, in English

 One Link-One Parts manual on CD, Operator and Service manual in pdf

 Seven (7) 60-watt LED lights for night drilling

 Side walkways and handrails with side boarding ladder

 Tool box, mounted under walkway (tools not included)

 Lift kit

 Towing hooks (front end)

 Battery disconnect

MAST

 152-270 mm (6-105⁄8 in) hole diameter

 Up to 22 680 kg (50,000 lb) rated single cylinder pulldown/hoist system

 Up to 24 000 kg (52,911 lb) bit load with one pipe in the drill string

 Patented HOBO (Hydraulically Operated Break-Out) wrench operated from the cab

 Auto cable tensioning system

 25° angle drilling package and mast locks

 Winch system 1587 kg (3,500 lb) capacity

TOP DRIVE

 Single motor

 Rotation speed 0-100 rpm

 Up to 13 016 N·m (9,600 ft-lb) torque

Single motor

 The MD6240 is designed to drill from 152-244 mm (6-9.625 in) diameter holes with rated pulldown and hoist capacity up to 22 680 kg (50,000 lb), in Rotary or Down the Hole applications.

 Metal turbo and exhaust manifold covers

 Engine pre-lube

 Additional filtration

 Coolant conditioner

 152-270 mm (6-105⁄8 in) hole diameter

 Up to 22 680 kg (50,000 lb) rated single cylinder pulldown/hoist system

 Up to 24 000 kg (52,911 lb) bit load with one pipe in the drill string

 Patented HOBO (Hydraulically Operated Break-Out) wrench operated from the cab

 Auto cable tensioning system

 25° angle drilling package and mast locks

 Winch system 1587 kg (3,500 lb) capacity

 Single motor

 Rotation speed 0-100 rpm

 Up to 13 016 N·m (9,600 ft-lb) torque

 Integrated FOPS

 Totally enclosed, insulated, two-man cab

 Two (2) hinged doors with heavy duty freezer type door latch system

 Ten (10) windows (safety glass, tinted)

 Windshield wiper and washer kit

 Electric over hydraulic drill functions

 Auxiliary functions operated by fingertip toggle switches

 More than 3 m2 (32.4 ft2) of floor space

 Excellent visibility

 dB rating of 80 or less

 Wall mounted air conditioner/heater/pressurizer, belt driven

 Rubber shock-mounts to absorb vibration

 Electric horn activated by push button in the cab

 Gel cell maintenance free battery

 Document holder inside the cab

 Excavator type, with 12 lower rollers

 750 mm (29.5 in) triple grousers

 Full length chain guides/rock guards

 Made of heavily cross-braced rectangular steel tubing

 Rear deck is stationary during both angle and vertical drilling modes

 Viewing hatch in rear deck, hydraulically operated from cab to help spotting holes

 Four (4) hydraulic leveling jacks (152 cm/60 in)

 Dust chamber clean-out door

 Centralized lubrication system (34 points)

 Additional mast rests mounted on non-drill end

 1325 L (350 gal) fuel tank under engine: - Additional fuel tank available as option

 1570 L (415 gal) additional fuel tank under compressor

 4 × 8D batteries

 Hydraulically operated from the cab

 Maximum ambient cooling capacity of 52° C (125° F) with replaceable cores

 Two (2) variable displacement axial piston pumps, in closed loop system, that operate the drill rotation, pulldown/hoist system, and tram functions

 Double-gear pump, in open loop system, for all auxiliary functions and fan circuit

 Dual filtration

 Top sub adapter

 Table bushing

 Bit sub [note: 12 m/39 ft configuration: 342 cm (135 in) S-S, 15 m/49 ft configuration: 152 cm (60 in) S-S]

 Horseshoe bushing

 Bit basket

 Hoist plug (lifting bail)

 Auto tool wrench/deck wrench

 See Optional Equipment and select the required system

 Standard Caterpillar Colors

 Backup alarm

 Filter kit for 50-hour preventive maintenance

 Two (2) hard copy sets Operator/Service/Maintenance/Parts/Engine manuals, in English

 One Link-One Parts manual on CD, Operator and Service manual in pdf

 Seven (7) 60-watt LED lights for night drilling

 Side walkways and handrails with side boarding ladder

 Tool box, mounted under walkway (tools not included)

 Lift kit

 Towing hooks (front end)

 Battery disconnect

Rotation speed 0-100 rpm

 The MD6240 is designed to drill from 152-244 mm (6-9.625 in) diameter holes with rated pulldown and hoist capacity up to 22 680 kg (50,000 lb), in Rotary or Down the Hole applications.

 Metal turbo and exhaust manifold covers

 Engine pre-lube

 Additional filtration

 Coolant conditioner

 152-270 mm (6-105⁄8 in) hole diameter

 Up to 22 680 kg (50,000 lb) rated single cylinder pulldown/hoist system

 Up to 24 000 kg (52,911 lb) bit load with one pipe in the drill string

 Patented HOBO (Hydraulically Operated Break-Out) wrench operated from the cab

 Auto cable tensioning system

 25° angle drilling package and mast locks

 Winch system 1587 kg (3,500 lb) capacity

 Single motor

 Rotation speed 0-100 rpm

 Up to 13 016 N·m (9,600 ft-lb) torque

 Integrated FOPS

 Totally enclosed, insulated, two-man cab

 Two (2) hinged doors with heavy duty freezer type door latch system

 Ten (10) windows (safety glass, tinted)

 Windshield wiper and washer kit

 Electric over hydraulic drill functions

 Auxiliary functions operated by fingertip toggle switches

 More than 3 m2 (32.4 ft2) of floor space

 Excellent visibility

 dB rating of 80 or less

 Wall mounted air conditioner/heater/pressurizer, belt driven

 Rubber shock-mounts to absorb vibration

 Electric horn activated by push button in the cab

 Gel cell maintenance free battery

 Document holder inside the cab

 Excavator type, with 12 lower rollers

 750 mm (29.5 in) triple grousers

 Full length chain guides/rock guards

 Made of heavily cross-braced rectangular steel tubing

 Rear deck is stationary during both angle and vertical drilling modes

 Viewing hatch in rear deck, hydraulically operated from cab to help spotting holes

 Four (4) hydraulic leveling jacks (152 cm/60 in)

 Dust chamber clean-out door

 Centralized lubrication system (34 points)

 Additional mast rests mounted on non-drill end

 1325 L (350 gal) fuel tank under engine: - Additional fuel tank available as option

 1570 L (415 gal) additional fuel tank under compressor

 4 × 8D batteries

 Hydraulically operated from the cab

 Maximum ambient cooling capacity of 52° C (125° F) with replaceable cores

 Two (2) variable displacement axial piston pumps, in closed loop system, that operate the drill rotation, pulldown/hoist system, and tram functions

 Double-gear pump, in open loop system, for all auxiliary functions and fan circuit

 Dual filtration

 Top sub adapter

 Table bushing

 Bit sub [note: 12 m/39 ft configuration: 342 cm (135 in) S-S, 15 m/49 ft configuration: 152 cm (60 in) S-S]

 Horseshoe bushing

 Bit basket

 Hoist plug (lifting bail)

 Auto tool wrench/deck wrench

 See Optional Equipment and select the required system

 Standard Caterpillar Colors

 Backup alarm

 Filter kit for 50-hour preventive maintenance

 Two (2) hard copy sets Operator/Service/Maintenance/Parts/Engine manuals, in English

 One Link-One Parts manual on CD, Operator and Service manual in pdf

 Seven (7) 60-watt LED lights for night drilling

 Side walkways and handrails with side boarding ladder

 Tool box, mounted under walkway (tools not included)

 Lift kit

 Towing hooks (front end)

 Battery disconnect

Up to 13 016 N·m (9,600 ft-lb) torque

 The MD6240 is designed to drill from 152-244 mm (6-9.625 in) diameter holes with rated pulldown and hoist capacity up to 22 680 kg (50,000 lb), in Rotary or Down the Hole applications.

 Metal turbo and exhaust manifold covers

 Engine pre-lube

 Additional filtration

 Coolant conditioner

 152-270 mm (6-105⁄8 in) hole diameter

 Up to 22 680 kg (50,000 lb) rated single cylinder pulldown/hoist system

 Up to 24 000 kg (52,911 lb) bit load with one pipe in the drill string

 Patented HOBO (Hydraulically Operated Break-Out) wrench operated from the cab

 Auto cable tensioning system

 25° angle drilling package and mast locks

 Winch system 1587 kg (3,500 lb) capacity

 Single motor

 Rotation speed 0-100 rpm

 Up to 13 016 N·m (9,600 ft-lb) torque

 Integrated FOPS

 Totally enclosed, insulated, two-man cab

 Two (2) hinged doors with heavy duty freezer type door latch system

 Ten (10) windows (safety glass, tinted)

 Windshield wiper and washer kit

 Electric over hydraulic drill functions

 Auxiliary functions operated by fingertip toggle switches

 More than 3 m2 (32.4 ft2) of floor space

 Excellent visibility

 dB rating of 80 or less

 Wall mounted air conditioner/heater/pressurizer, belt driven

 Rubber shock-mounts to absorb vibration

 Electric horn activated by push button in the cab

 Gel cell maintenance free battery

 Document holder inside the cab

 Excavator type, with 12 lower rollers

 750 mm (29.5 in) triple grousers

 Full length chain guides/rock guards

 Made of heavily cross-braced rectangular steel tubing

 Rear deck is stationary during both angle and vertical drilling modes

 Viewing hatch in rear deck, hydraulically operated from cab to help spotting holes

 Four (4) hydraulic leveling jacks (152 cm/60 in)

 Dust chamber clean-out door

 Centralized lubrication system (34 points)

 Additional mast rests mounted on non-drill end

 1325 L (350 gal) fuel tank under engine: - Additional fuel tank available as option

 1570 L (415 gal) additional fuel tank under compressor

 4 × 8D batteries

 Hydraulically operated from the cab

 Maximum ambient cooling capacity of 52° C (125° F) with replaceable cores

 Two (2) variable displacement axial piston pumps, in closed loop system, that operate the drill rotation, pulldown/hoist system, and tram functions

 Double-gear pump, in open loop system, for all auxiliary functions and fan circuit

 Dual filtration

 Top sub adapter

 Table bushing

 Bit sub [note: 12 m/39 ft configuration: 342 cm (135 in) S-S, 15 m/49 ft configuration: 152 cm (60 in) S-S]

 Horseshoe bushing

 Bit basket

 Hoist plug (lifting bail)

 Auto tool wrench/deck wrench

 See Optional Equipment and select the required system

 Standard Caterpillar Colors

 Backup alarm

 Filter kit for 50-hour preventive maintenance

 Two (2) hard copy sets Operator/Service/Maintenance/Parts/Engine manuals, in English

 One Link-One Parts manual on CD, Operator and Service manual in pdf

 Seven (7) 60-watt LED lights for night drilling

 Side walkways and handrails with side boarding ladder

 Tool box, mounted under walkway (tools not included)

 Lift kit

 Towing hooks (front end)

 Battery disconnect

OPERATOR'S CAB

 Integrated FOPS

 Totally enclosed, insulated, two-man cab

 Two (2) hinged doors with heavy duty freezer type door latch system

 Ten (10) windows (safety glass, tinted)

 Windshield wiper and washer kit

 Ergonomic operator’s console with full instrumentation

 Ergonomic operator’s seat with head and armrests, retractable seat belt, air suspension mount

 Electric over hydraulic drill functions

 Auxiliary functions operated by fingertip toggle switches

 More than 3 m2 (32.4 ft2) of floor space

 Excellent visibility

 dB rating of 80 or less

 Wall mounted air conditioner/heater/pressurizer, belt driven

 Rubber shock-mounts to absorb vibration

 Electric horn activated by push button in the cab

 Gel cell maintenance free battery

 Document holder inside the cab

Integrated FOPS

 The MD6240 is designed to drill from 152-244 mm (6-9.625 in) diameter holes with rated pulldown and hoist capacity up to 22 680 kg (50,000 lb), in Rotary or Down the Hole applications.

 Metal turbo and exhaust manifold covers

 Engine pre-lube

 Additional filtration

 Coolant conditioner

 152-270 mm (6-105⁄8 in) hole diameter

 Up to 22 680 kg (50,000 lb) rated single cylinder pulldown/hoist system

 Up to 24 000 kg (52,911 lb) bit load with one pipe in the drill string

 Patented HOBO (Hydraulically Operated Break-Out) wrench operated from the cab

 Auto cable tensioning system

 25° angle drilling package and mast locks

 Winch system 1587 kg (3,500 lb) capacity

 Single motor

 Rotation speed 0-100 rpm

 Up to 13 016 N·m (9,600 ft-lb) torque

 Integrated FOPS

 Totally enclosed, insulated, two-man cab

 Two (2) hinged doors with heavy duty freezer type door latch system

 Ten (10) windows (safety glass, tinted)

 Windshield wiper and washer kit

 Electric over hydraulic drill functions

 Auxiliary functions operated by fingertip toggle switches

 More than 3 m2 (32.4 ft2) of floor space

 Excellent visibility

 dB rating of 80 or less

 Wall mounted air conditioner/heater/pressurizer, belt driven

 Rubber shock-mounts to absorb vibration

 Electric horn activated by push button in the cab

 Gel cell maintenance free battery

 Document holder inside the cab

 Excavator type, with 12 lower rollers

 750 mm (29.5 in) triple grousers

 Full length chain guides/rock guards

 Made of heavily cross-braced rectangular steel tubing

 Rear deck is stationary during both angle and vertical drilling modes

 Viewing hatch in rear deck, hydraulically operated from cab to help spotting holes

 Four (4) hydraulic leveling jacks (152 cm/60 in)

 Dust chamber clean-out door

 Centralized lubrication system (34 points)

 Additional mast rests mounted on non-drill end

 1325 L (350 gal) fuel tank under engine: - Additional fuel tank available as option

 1570 L (415 gal) additional fuel tank under compressor

 4 × 8D batteries

 Hydraulically operated from the cab

 Maximum ambient cooling capacity of 52° C (125° F) with replaceable cores

 Two (2) variable displacement axial piston pumps, in closed loop system, that operate the drill rotation, pulldown/hoist system, and tram functions

 Double-gear pump, in open loop system, for all auxiliary functions and fan circuit

 Dual filtration

 Top sub adapter

 Table bushing

 Bit sub [note: 12 m/39 ft configuration: 342 cm (135 in) S-S, 15 m/49 ft configuration: 152 cm (60 in) S-S]

 Horseshoe bushing

 Bit basket

 Hoist plug (lifting bail)

 Auto tool wrench/deck wrench

 See Optional Equipment and select the required system

 Standard Caterpillar Colors

 Backup alarm

 Filter kit for 50-hour preventive maintenance

 Two (2) hard copy sets Operator/Service/Maintenance/Parts/Engine manuals, in English

 One Link-One Parts manual on CD, Operator and Service manual in pdf

 Seven (7) 60-watt LED lights for night drilling

 Side walkways and handrails with side boarding ladder

 Tool box, mounted under walkway (tools not included)

 Lift kit

 Towing hooks (front end)

 Battery disconnect

Totally enclosed, insulated, two-man cab

 The MD6240 is designed to drill from 152-244 mm (6-9.625 in) diameter holes with rated pulldown and hoist capacity up to 22 680 kg (50,000 lb), in Rotary or Down the Hole applications.

 Metal turbo and exhaust manifold covers

 Engine pre-lube

 Additional filtration

 Coolant conditioner

 152-270 mm (6-105⁄8 in) hole diameter

 Up to 22 680 kg (50,000 lb) rated single cylinder pulldown/hoist system

 Up to 24 000 kg (52,911 lb) bit load with one pipe in the drill string

 Patented HOBO (Hydraulically Operated Break-Out) wrench operated from the cab

 Auto cable tensioning system

 25° angle drilling package and mast locks

 Winch system 1587 kg (3,500 lb) capacity

 Single motor

 Rotation speed 0-100 rpm

 Up to 13 016 N·m (9,600 ft-lb) torque

 Integrated FOPS

 Totally enclosed, insulated, two-man cab

 Two (2) hinged doors with heavy duty freezer type door latch system

 Ten (10) windows (safety glass, tinted)

 Windshield wiper and washer kit

 Electric over hydraulic drill functions

 Auxiliary functions operated by fingertip toggle switches

 More than 3 m2 (32.4 ft2) of floor space

 Excellent visibility

 dB rating of 80 or less

 Wall mounted air conditioner/heater/pressurizer, belt driven

 Rubber shock-mounts to absorb vibration

 Electric horn activated by push button in the cab

 Gel cell maintenance free battery

 Document holder inside the cab

 Excavator type, with 12 lower rollers

 750 mm (29.5 in) triple grousers

 Full length chain guides/rock guards

 Made of heavily cross-braced rectangular steel tubing

 Rear deck is stationary during both angle and vertical drilling modes

 Viewing hatch in rear deck, hydraulically operated from cab to help spotting holes

 Four (4) hydraulic leveling jacks (152 cm/60 in)

 Dust chamber clean-out door

 Centralized lubrication system (34 points)

 Additional mast rests mounted on non-drill end

 1325 L (350 gal) fuel tank under engine: - Additional fuel tank available as option

 1570 L (415 gal) additional fuel tank under compressor

 4 × 8D batteries

 Hydraulically operated from the cab

 Maximum ambient cooling capacity of 52° C (125° F) with replaceable cores

 Two (2) variable displacement axial piston pumps, in closed loop system, that operate the drill rotation, pulldown/hoist system, and tram functions

 Double-gear pump, in open loop system, for all auxiliary functions and fan circuit

 Dual filtration

 Top sub adapter

 Table bushing

 Bit sub [note: 12 m/39 ft configuration: 342 cm (135 in) S-S, 15 m/49 ft configuration: 152 cm (60 in) S-S]

 Horseshoe bushing

 Bit basket

 Hoist plug (lifting bail)

 Auto tool wrench/deck wrench

 See Optional Equipment and select the required system

 Standard Caterpillar Colors

 Backup alarm

 Filter kit for 50-hour preventive maintenance

 Two (2) hard copy sets Operator/Service/Maintenance/Parts/Engine manuals, in English

 One Link-One Parts manual on CD, Operator and Service manual in pdf

 Seven (7) 60-watt LED lights for night drilling

 Side walkways and handrails with side boarding ladder

 Tool box, mounted under walkway (tools not included)

 Lift kit

 Towing hooks (front end)

 Battery disconnect

Two (2) hinged doors with heavy duty freezer type door latch system

 The MD6240 is designed to drill from 152-244 mm (6-9.625 in) diameter holes with rated pulldown and hoist capacity up to 22 680 kg (50,000 lb), in Rotary or Down the Hole applications.

 Metal turbo and exhaust manifold covers

 Engine pre-lube

 Additional filtration

 Coolant conditioner

 152-270 mm (6-105⁄8 in) hole diameter

 Up to 22 680 kg (50,000 lb) rated single cylinder pulldown/hoist system

 Up to 24 000 kg (52,911 lb) bit load with one pipe in the drill string

 Patented HOBO (Hydraulically Operated Break-Out) wrench operated from the cab

 Auto cable tensioning system

 25° angle drilling package and mast locks

 Winch system 1587 kg (3,500 lb) capacity

 Single motor

 Rotation speed 0-100 rpm

 Up to 13 016 N·m (9,600 ft-lb) torque

 Integrated FOPS

 Totally enclosed, insulated, two-man cab

 Two (2) hinged doors with heavy duty freezer type door latch system

 Ten (10) windows (safety glass, tinted)

 Windshield wiper and washer kit

 Electric over hydraulic drill functions

 Auxiliary functions operated by fingertip toggle switches

 More than 3 m2 (32.4 ft2) of floor space

 Excellent visibility

 dB rating of 80 or less

 Wall mounted air conditioner/heater/pressurizer, belt driven

 Rubber shock-mounts to absorb vibration

 Electric horn activated by push button in the cab

 Gel cell maintenance free battery

 Document holder inside the cab

 Excavator type, with 12 lower rollers

 750 mm (29.5 in) triple grousers

 Full length chain guides/rock guards

 Made of heavily cross-braced rectangular steel tubing

 Rear deck is stationary during both angle and vertical drilling modes

 Viewing hatch in rear deck, hydraulically operated from cab to help spotting holes

 Four (4) hydraulic leveling jacks (152 cm/60 in)

 Dust chamber clean-out door

 Centralized lubrication system (34 points)

 Additional mast rests mounted on non-drill end

 1325 L (350 gal) fuel tank under engine: - Additional fuel tank available as option

 1570 L (415 gal) additional fuel tank under compressor

 4 × 8D batteries

 Hydraulically operated from the cab

 Maximum ambient cooling capacity of 52° C (125° F) with replaceable cores

 Two (2) variable displacement axial piston pumps, in closed loop system, that operate the drill rotation, pulldown/hoist system, and tram functions

 Double-gear pump, in open loop system, for all auxiliary functions and fan circuit

 Dual filtration

 Top sub adapter

 Table bushing

 Bit sub [note: 12 m/39 ft configuration: 342 cm (135 in) S-S, 15 m/49 ft configuration: 152 cm (60 in) S-S]

 Horseshoe bushing

 Bit basket

 Hoist plug (lifting bail)

 Auto tool wrench/deck wrench

 See Optional Equipment and select the required system

 Standard Caterpillar Colors

 Backup alarm

 Filter kit for 50-hour preventive maintenance

 Two (2) hard copy sets Operator/Service/Maintenance/Parts/Engine manuals, in English

 One Link-One Parts manual on CD, Operator and Service manual in pdf

 Seven (7) 60-watt LED lights for night drilling

 Side walkways and handrails with side boarding ladder

 Tool box, mounted under walkway (tools not included)

 Lift kit

 Towing hooks (front end)

 Battery disconnect

Ten (10) windows (safety glass, tinted)

 The MD6240 is designed to drill from 152-244 mm (6-9.625 in) diameter holes with rated pulldown and hoist capacity up to 22 680 kg (50,000 lb), in Rotary or Down the Hole applications.

 Metal turbo and exhaust manifold covers

 Engine pre-lube

 Additional filtration

 Coolant conditioner

 152-270 mm (6-105⁄8 in) hole diameter

 Up to 22 680 kg (50,000 lb) rated single cylinder pulldown/hoist system

 Up to 24 000 kg (52,911 lb) bit load with one pipe in the drill string

 Patented HOBO (Hydraulically Operated Break-Out) wrench operated from the cab

 Auto cable tensioning system

 25° angle drilling package and mast locks

 Winch system 1587 kg (3,500 lb) capacity

 Single motor

 Rotation speed 0-100 rpm

 Up to 13 016 N·m (9,600 ft-lb) torque

 Integrated FOPS

 Totally enclosed, insulated, two-man cab

 Two (2) hinged doors with heavy duty freezer type door latch system

 Ten (10) windows (safety glass, tinted)

 Windshield wiper and washer kit

 Electric over hydraulic drill functions

 Auxiliary functions operated by fingertip toggle switches

 More than 3 m2 (32.4 ft2) of floor space

 Excellent visibility

 dB rating of 80 or less

 Wall mounted air conditioner/heater/pressurizer, belt driven

 Rubber shock-mounts to absorb vibration

 Electric horn activated by push button in the cab

 Gel cell maintenance free battery

 Document holder inside the cab

 Excavator type, with 12 lower rollers

 750 mm (29.5 in) triple grousers

 Full length chain guides/rock guards

 Made of heavily cross-braced rectangular steel tubing

 Rear deck is stationary during both angle and vertical drilling modes

 Viewing hatch in rear deck, hydraulically operated from cab to help spotting holes

 Four (4) hydraulic leveling jacks (152 cm/60 in)

 Dust chamber clean-out door

 Centralized lubrication system (34 points)

 Additional mast rests mounted on non-drill end

 1325 L (350 gal) fuel tank under engine: - Additional fuel tank available as option

 1570 L (415 gal) additional fuel tank under compressor

 4 × 8D batteries

 Hydraulically operated from the cab

 Maximum ambient cooling capacity of 52° C (125° F) with replaceable cores

 Two (2) variable displacement axial piston pumps, in closed loop system, that operate the drill rotation, pulldown/hoist system, and tram functions

 Double-gear pump, in open loop system, for all auxiliary functions and fan circuit

 Dual filtration

 Top sub adapter

 Table bushing

 Bit sub [note: 12 m/39 ft configuration: 342 cm (135 in) S-S, 15 m/49 ft configuration: 152 cm (60 in) S-S]

 Horseshoe bushing

 Bit basket

 Hoist plug (lifting bail)

 Auto tool wrench/deck wrench

 See Optional Equipment and select the required system

 Standard Caterpillar Colors

 Backup alarm

 Filter kit for 50-hour preventive maintenance

 Two (2) hard copy sets Operator/Service/Maintenance/Parts/Engine manuals, in English

 One Link-One Parts manual on CD, Operator and Service manual in pdf

 Seven (7) 60-watt LED lights for night drilling

 Side walkways and handrails with side boarding ladder

 Tool box, mounted under walkway (tools not included)

 Lift kit

 Towing hooks (front end)

 Battery disconnect

Windshield wiper and washer kit

 The MD6240 is designed to drill from 152-244 mm (6-9.625 in) diameter holes with rated pulldown and hoist capacity up to 22 680 kg (50,000 lb), in Rotary or Down the Hole applications.

 Metal turbo and exhaust manifold covers

 Engine pre-lube

 Additional filtration

 Coolant conditioner

 152-270 mm (6-105⁄8 in) hole diameter

 Up to 22 680 kg (50,000 lb) rated single cylinder pulldown/hoist system

 Up to 24 000 kg (52,911 lb) bit load with one pipe in the drill string

 Patented HOBO (Hydraulically Operated Break-Out) wrench operated from the cab

 Auto cable tensioning system

 25° angle drilling package and mast locks

 Winch system 1587 kg (3,500 lb) capacity

 Single motor

 Rotation speed 0-100 rpm

 Up to 13 016 N·m (9,600 ft-lb) torque

 Integrated FOPS

 Totally enclosed, insulated, two-man cab

 Two (2) hinged doors with heavy duty freezer type door latch system

 Ten (10) windows (safety glass, tinted)

 Windshield wiper and washer kit

 Electric over hydraulic drill functions

 Auxiliary functions operated by fingertip toggle switches

 More than 3 m2 (32.4 ft2) of floor space

 Excellent visibility

 dB rating of 80 or less

 Wall mounted air conditioner/heater/pressurizer, belt driven

 Rubber shock-mounts to absorb vibration

 Electric horn activated by push button in the cab

 Gel cell maintenance free battery

 Document holder inside the cab

 Excavator type, with 12 lower rollers

 750 mm (29.5 in) triple grousers

 Full length chain guides/rock guards

 Made of heavily cross-braced rectangular steel tubing

 Rear deck is stationary during both angle and vertical drilling modes

 Viewing hatch in rear deck, hydraulically operated from cab to help spotting holes

 Four (4) hydraulic leveling jacks (152 cm/60 in)

 Dust chamber clean-out door

 Centralized lubrication system (34 points)

 Additional mast rests mounted on non-drill end

 1325 L (350 gal) fuel tank under engine: - Additional fuel tank available as option

 1570 L (415 gal) additional fuel tank under compressor

 4 × 8D batteries

 Hydraulically operated from the cab

 Maximum ambient cooling capacity of 52° C (125° F) with replaceable cores

 Two (2) variable displacement axial piston pumps, in closed loop system, that operate the drill rotation, pulldown/hoist system, and tram functions

 Double-gear pump, in open loop system, for all auxiliary functions and fan circuit

 Dual filtration

 Top sub adapter

 Table bushing

 Bit sub [note: 12 m/39 ft configuration: 342 cm (135 in) S-S, 15 m/49 ft configuration: 152 cm (60 in) S-S]

 Horseshoe bushing

 Bit basket

 Hoist plug (lifting bail)

 Auto tool wrench/deck wrench

 See Optional Equipment and select the required system

 Standard Caterpillar Colors

 Backup alarm

 Filter kit for 50-hour preventive maintenance

 Two (2) hard copy sets Operator/Service/Maintenance/Parts/Engine manuals, in English

 One Link-One Parts manual on CD, Operator and Service manual in pdf

 Seven (7) 60-watt LED lights for night drilling

 Side walkways and handrails with side boarding ladder

 Tool box, mounted under walkway (tools not included)

 Lift kit

 Towing hooks (front end)

 Battery disconnect

Ergonomic operator’s console with full instrumentation

 The MD6240 is designed to drill from 152-244 mm (6-9.625 in) diameter holes with rated pulldown and hoist capacity up to 22 680 kg (50,000 lb), in Rotary or Down the Hole applications.

 Metal turbo and exhaust manifold covers

 Engine pre-lube

 Additional filtration

 Coolant conditioner

 152-270 mm (6-105⁄8 in) hole diameter

 Up to 22 680 kg (50,000 lb) rated single cylinder pulldown/hoist system

 Up to 24 000 kg (52,911 lb) bit load with one pipe in the drill string

 Patented HOBO (Hydraulically Operated Break-Out) wrench operated from the cab

 Auto cable tensioning system

 25° angle drilling package and mast locks

 Winch system 1587 kg (3,500 lb) capacity

 Single motor

 Rotation speed 0-100 rpm

 Up to 13 016 N·m (9,600 ft-lb) torque

 Integrated FOPS

 Totally enclosed, insulated, two-man cab

 Two (2) hinged doors with heavy duty freezer type door latch system

 Ten (10) windows (safety glass, tinted)

 Windshield wiper and washer kit

 Electric over hydraulic drill functions

 Auxiliary functions operated by fingertip toggle switches

 More than 3 m2 (32.4 ft2) of floor space

 Excellent visibility

 dB rating of 80 or less

 Wall mounted air conditioner/heater/pressurizer, belt driven

 Rubber shock-mounts to absorb vibration

 Electric horn activated by push button in the cab

 Gel cell maintenance free battery

 Document holder inside the cab

 Excavator type, with 12 lower rollers

 750 mm (29.5 in) triple grousers

 Full length chain guides/rock guards

 Made of heavily cross-braced rectangular steel tubing

 Rear deck is stationary during both angle and vertical drilling modes

 Viewing hatch in rear deck, hydraulically operated from cab to help spotting holes

 Four (4) hydraulic leveling jacks (152 cm/60 in)

 Dust chamber clean-out door

 Centralized lubrication system (34 points)

 Additional mast rests mounted on non-drill end

 1325 L (350 gal) fuel tank under engine: - Additional fuel tank available as option

 1570 L (415 gal) additional fuel tank under compressor

 4 × 8D batteries

 Hydraulically operated from the cab

 Maximum ambient cooling capacity of 52° C (125° F) with replaceable cores

 Two (2) variable displacement axial piston pumps, in closed loop system, that operate the drill rotation, pulldown/hoist system, and tram functions

 Double-gear pump, in open loop system, for all auxiliary functions and fan circuit

 Dual filtration

 Top sub adapter

 Table bushing

 Bit sub [note: 12 m/39 ft configuration: 342 cm (135 in) S-S, 15 m/49 ft configuration: 152 cm (60 in) S-S]

 Horseshoe bushing

 Bit basket

 Hoist plug (lifting bail)

 Auto tool wrench/deck wrench

 See Optional Equipment and select the required system

 Standard Caterpillar Colors

 Backup alarm

 Filter kit for 50-hour preventive maintenance

 Two (2) hard copy sets Operator/Service/Maintenance/Parts/Engine manuals, in English

 One Link-One Parts manual on CD, Operator and Service manual in pdf

 Seven (7) 60-watt LED lights for night drilling

 Side walkways and handrails with side boarding ladder

 Tool box, mounted under walkway (tools not included)

 Lift kit

 Towing hooks (front end)

 Battery disconnect

Ergonomic operator’s seat with head and armrests, retractable seat belt, air suspension mount

 The MD6240 is designed to drill from 152-244 mm (6-9.625 in) diameter holes with rated pulldown and hoist capacity up to 22 680 kg (50,000 lb), in Rotary or Down the Hole applications.

 Metal turbo and exhaust manifold covers

 Engine pre-lube

 Additional filtration

 Coolant conditioner

 152-270 mm (6-105⁄8 in) hole diameter

 Up to 22 680 kg (50,000 lb) rated single cylinder pulldown/hoist system

 Up to 24 000 kg (52,911 lb) bit load with one pipe in the drill string

 Patented HOBO (Hydraulically Operated Break-Out) wrench operated from the cab

 Auto cable tensioning system

 25° angle drilling package and mast locks

 Winch system 1587 kg (3,500 lb) capacity

 Single motor

 Rotation speed 0-100 rpm

 Up to 13 016 N·m (9,600 ft-lb) torque

 Integrated FOPS

 Totally enclosed, insulated, two-man cab

 Two (2) hinged doors with heavy duty freezer type door latch system

 Ten (10) windows (safety glass, tinted)

 Windshield wiper and washer kit

 Electric over hydraulic drill functions

 Auxiliary functions operated by fingertip toggle switches

 More than 3 m2 (32.4 ft2) of floor space

 Excellent visibility

 dB rating of 80 or less

 Wall mounted air conditioner/heater/pressurizer, belt driven

 Rubber shock-mounts to absorb vibration

 Electric horn activated by push button in the cab

 Gel cell maintenance free battery

 Document holder inside the cab

 Excavator type, with 12 lower rollers

 750 mm (29.5 in) triple grousers

 Full length chain guides/rock guards

 Made of heavily cross-braced rectangular steel tubing

 Rear deck is stationary during both angle and vertical drilling modes

 Viewing hatch in rear deck, hydraulically operated from cab to help spotting holes

 Four (4) hydraulic leveling jacks (152 cm/60 in)

 Dust chamber clean-out door

 Centralized lubrication system (34 points)

 Additional mast rests mounted on non-drill end

 1325 L (350 gal) fuel tank under engine: - Additional fuel tank available as option

 1570 L (415 gal) additional fuel tank under compressor

 4 × 8D batteries

 Hydraulically operated from the cab

 Maximum ambient cooling capacity of 52° C (125° F) with replaceable cores

 Two (2) variable displacement axial piston pumps, in closed loop system, that operate the drill rotation, pulldown/hoist system, and tram functions

 Double-gear pump, in open loop system, for all auxiliary functions and fan circuit

 Dual filtration

 Top sub adapter

 Table bushing

 Bit sub [note: 12 m/39 ft configuration: 342 cm (135 in) S-S, 15 m/49 ft configuration: 152 cm (60 in) S-S]

 Horseshoe bushing

 Bit basket

 Hoist plug (lifting bail)

 Auto tool wrench/deck wrench

 See Optional Equipment and select the required system

 Standard Caterpillar Colors

 Backup alarm

 Filter kit for 50-hour preventive maintenance

 Two (2) hard copy sets Operator/Service/Maintenance/Parts/Engine manuals, in English

 One Link-One Parts manual on CD, Operator and Service manual in pdf

 Seven (7) 60-watt LED lights for night drilling

 Side walkways and handrails with side boarding ladder

 Tool box, mounted under walkway (tools not included)

 Lift kit

 Towing hooks (front end)

 Battery disconnect

Electric over hydraulic drill functions

 The MD6240 is designed to drill from 152-244 mm (6-9.625 in) diameter holes with rated pulldown and hoist capacity up to 22 680 kg (50,000 lb), in Rotary or Down the Hole applications.

 Metal turbo and exhaust manifold covers

 Engine pre-lube

 Additional filtration

 Coolant conditioner

 152-270 mm (6-105⁄8 in) hole diameter

 Up to 22 680 kg (50,000 lb) rated single cylinder pulldown/hoist system

 Up to 24 000 kg (52,911 lb) bit load with one pipe in the drill string

 Patented HOBO (Hydraulically Operated Break-Out) wrench operated from the cab

 Auto cable tensioning system

 25° angle drilling package and mast locks

 Winch system 1587 kg (3,500 lb) capacity

 Single motor

 Rotation speed 0-100 rpm

 Up to 13 016 N·m (9,600 ft-lb) torque

 Integrated FOPS

 Totally enclosed, insulated, two-man cab

 Two (2) hinged doors with heavy duty freezer type door latch system

 Ten (10) windows (safety glass, tinted)

 Windshield wiper and washer kit

 Electric over hydraulic drill functions

 Auxiliary functions operated by fingertip toggle switches

 More than 3 m2 (32.4 ft2) of floor space

 Excellent visibility

 dB rating of 80 or less

 Wall mounted air conditioner/heater/pressurizer, belt driven

 Rubber shock-mounts to absorb vibration

 Electric horn activated by push button in the cab

 Gel cell maintenance free battery

 Document holder inside the cab

 Excavator type, with 12 lower rollers

 750 mm (29.5 in) triple grousers

 Full length chain guides/rock guards

 Made of heavily cross-braced rectangular steel tubing

 Rear deck is stationary during both angle and vertical drilling modes

 Viewing hatch in rear deck, hydraulically operated from cab to help spotting holes

 Four (4) hydraulic leveling jacks (152 cm/60 in)

 Dust chamber clean-out door

 Centralized lubrication system (34 points)

 Additional mast rests mounted on non-drill end

 1325 L (350 gal) fuel tank under engine: - Additional fuel tank available as option

 1570 L (415 gal) additional fuel tank under compressor

 4 × 8D batteries

 Hydraulically operated from the cab

 Maximum ambient cooling capacity of 52° C (125° F) with replaceable cores

 Two (2) variable displacement axial piston pumps, in closed loop system, that operate the drill rotation, pulldown/hoist system, and tram functions

 Double-gear pump, in open loop system, for all auxiliary functions and fan circuit

 Dual filtration

 Top sub adapter

 Table bushing

 Bit sub [note: 12 m/39 ft configuration: 342 cm (135 in) S-S, 15 m/49 ft configuration: 152 cm (60 in) S-S]

 Horseshoe bushing

 Bit basket

 Hoist plug (lifting bail)

 Auto tool wrench/deck wrench

 See Optional Equipment and select the required system

 Standard Caterpillar Colors

 Backup alarm

 Filter kit for 50-hour preventive maintenance

 Two (2) hard copy sets Operator/Service/Maintenance/Parts/Engine manuals, in English

 One Link-One Parts manual on CD, Operator and Service manual in pdf

 Seven (7) 60-watt LED lights for night drilling

 Side walkways and handrails with side boarding ladder

 Tool box, mounted under walkway (tools not included)

 Lift kit

 Towing hooks (front end)

 Battery disconnect

Auxiliary functions operated by fingertip toggle switches

 The MD6240 is designed to drill from 152-244 mm (6-9.625 in) diameter holes with rated pulldown and hoist capacity up to 22 680 kg (50,000 lb), in Rotary or Down the Hole applications.

 Metal turbo and exhaust manifold covers

 Engine pre-lube

 Additional filtration

 Coolant conditioner

 152-270 mm (6-105⁄8 in) hole diameter

 Up to 22 680 kg (50,000 lb) rated single cylinder pulldown/hoist system

 Up to 24 000 kg (52,911 lb) bit load with one pipe in the drill string

 Patented HOBO (Hydraulically Operated Break-Out) wrench operated from the cab

 Auto cable tensioning system

 25° angle drilling package and mast locks

 Winch system 1587 kg (3,500 lb) capacity

 Single motor

 Rotation speed 0-100 rpm

 Up to 13 016 N·m (9,600 ft-lb) torque

 Integrated FOPS

 Totally enclosed, insulated, two-man cab

 Two (2) hinged doors with heavy duty freezer type door latch system

 Ten (10) windows (safety glass, tinted)

 Windshield wiper and washer kit

 Electric over hydraulic drill functions

 Auxiliary functions operated by fingertip toggle switches

 More than 3 m2 (32.4 ft2) of floor space

 Excellent visibility

 dB rating of 80 or less

 Wall mounted air conditioner/heater/pressurizer, belt driven

 Rubber shock-mounts to absorb vibration

 Electric horn activated by push button in the cab

 Gel cell maintenance free battery

 Document holder inside the cab

 Excavator type, with 12 lower rollers

 750 mm (29.5 in) triple grousers

 Full length chain guides/rock guards

 Made of heavily cross-braced rectangular steel tubing

 Rear deck is stationary during both angle and vertical drilling modes

 Viewing hatch in rear deck, hydraulically operated from cab to help spotting holes

 Four (4) hydraulic leveling jacks (152 cm/60 in)

 Dust chamber clean-out door

 Centralized lubrication system (34 points)

 Additional mast rests mounted on non-drill end

 1325 L (350 gal) fuel tank under engine: - Additional fuel tank available as option

 1570 L (415 gal) additional fuel tank under compressor

 4 × 8D batteries

 Hydraulically operated from the cab

 Maximum ambient cooling capacity of 52° C (125° F) with replaceable cores

 Two (2) variable displacement axial piston pumps, in closed loop system, that operate the drill rotation, pulldown/hoist system, and tram functions

 Double-gear pump, in open loop system, for all auxiliary functions and fan circuit

 Dual filtration

 Top sub adapter

 Table bushing

 Bit sub [note: 12 m/39 ft configuration: 342 cm (135 in) S-S, 15 m/49 ft configuration: 152 cm (60 in) S-S]

 Horseshoe bushing

 Bit basket

 Hoist plug (lifting bail)

 Auto tool wrench/deck wrench

 See Optional Equipment and select the required system

 Standard Caterpillar Colors

 Backup alarm

 Filter kit for 50-hour preventive maintenance

 Two (2) hard copy sets Operator/Service/Maintenance/Parts/Engine manuals, in English

 One Link-One Parts manual on CD, Operator and Service manual in pdf

 Seven (7) 60-watt LED lights for night drilling

 Side walkways and handrails with side boarding ladder

 Tool box, mounted under walkway (tools not included)

 Lift kit

 Towing hooks (front end)

 Battery disconnect

More than 3 m2 (32.4 ft2) of floor space

 The MD6240 is designed to drill from 152-244 mm (6-9.625 in) diameter holes with rated pulldown and hoist capacity up to 22 680 kg (50,000 lb), in Rotary or Down the Hole applications.

 Metal turbo and exhaust manifold covers

 Engine pre-lube

 Additional filtration

 Coolant conditioner

 152-270 mm (6-105⁄8 in) hole diameter

 Up to 22 680 kg (50,000 lb) rated single cylinder pulldown/hoist system

 Up to 24 000 kg (52,911 lb) bit load with one pipe in the drill string

 Patented HOBO (Hydraulically Operated Break-Out) wrench operated from the cab

 Auto cable tensioning system

 25° angle drilling package and mast locks

 Winch system 1587 kg (3,500 lb) capacity

 Single motor

 Rotation speed 0-100 rpm

 Up to 13 016 N·m (9,600 ft-lb) torque

 Integrated FOPS

 Totally enclosed, insulated, two-man cab

 Two (2) hinged doors with heavy duty freezer type door latch system

 Ten (10) windows (safety glass, tinted)

 Windshield wiper and washer kit

 Electric over hydraulic drill functions

 Auxiliary functions operated by fingertip toggle switches

 More than 3 m2 (32.4 ft2) of floor space

 Excellent visibility

 dB rating of 80 or less

 Wall mounted air conditioner/heater/pressurizer, belt driven

 Rubber shock-mounts to absorb vibration

 Electric horn activated by push button in the cab

 Gel cell maintenance free battery

 Document holder inside the cab

 Excavator type, with 12 lower rollers

 750 mm (29.5 in) triple grousers

 Full length chain guides/rock guards

 Made of heavily cross-braced rectangular steel tubing

 Rear deck is stationary during both angle and vertical drilling modes

 Viewing hatch in rear deck, hydraulically operated from cab to help spotting holes

 Four (4) hydraulic leveling jacks (152 cm/60 in)

 Dust chamber clean-out door

 Centralized lubrication system (34 points)

 Additional mast rests mounted on non-drill end

 1325 L (350 gal) fuel tank under engine: - Additional fuel tank available as option

 1570 L (415 gal) additional fuel tank under compressor

 4 × 8D batteries

 Hydraulically operated from the cab

 Maximum ambient cooling capacity of 52° C (125° F) with replaceable cores

 Two (2) variable displacement axial piston pumps, in closed loop system, that operate the drill rotation, pulldown/hoist system, and tram functions

 Double-gear pump, in open loop system, for all auxiliary functions and fan circuit

 Dual filtration

 Top sub adapter

 Table bushing

 Bit sub [note: 12 m/39 ft configuration: 342 cm (135 in) S-S, 15 m/49 ft configuration: 152 cm (60 in) S-S]

 Horseshoe bushing

 Bit basket

 Hoist plug (lifting bail)

 Auto tool wrench/deck wrench

 See Optional Equipment and select the required system

 Standard Caterpillar Colors

 Backup alarm

 Filter kit for 50-hour preventive maintenance

 Two (2) hard copy sets Operator/Service/Maintenance/Parts/Engine manuals, in English

 One Link-One Parts manual on CD, Operator and Service manual in pdf

 Seven (7) 60-watt LED lights for night drilling

 Side walkways and handrails with side boarding ladder

 Tool box, mounted under walkway (tools not included)

 Lift kit

 Towing hooks (front end)

 Battery disconnect

Excellent visibility

 The MD6240 is designed to drill from 152-244 mm (6-9.625 in) diameter holes with rated pulldown and hoist capacity up to 22 680 kg (50,000 lb), in Rotary or Down the Hole applications.

 Metal turbo and exhaust manifold covers

 Engine pre-lube

 Additional filtration

 Coolant conditioner

 152-270 mm (6-105⁄8 in) hole diameter

 Up to 22 680 kg (50,000 lb) rated single cylinder pulldown/hoist system

 Up to 24 000 kg (52,911 lb) bit load with one pipe in the drill string

 Patented HOBO (Hydraulically Operated Break-Out) wrench operated from the cab

 Auto cable tensioning system

 25° angle drilling package and mast locks

 Winch system 1587 kg (3,500 lb) capacity

 Single motor

 Rotation speed 0-100 rpm

 Up to 13 016 N·m (9,600 ft-lb) torque

 Integrated FOPS

 Totally enclosed, insulated, two-man cab

 Two (2) hinged doors with heavy duty freezer type door latch system

 Ten (10) windows (safety glass, tinted)

 Windshield wiper and washer kit

 Electric over hydraulic drill functions

 Auxiliary functions operated by fingertip toggle switches

 More than 3 m2 (32.4 ft2) of floor space

 Excellent visibility

 dB rating of 80 or less

 Wall mounted air conditioner/heater/pressurizer, belt driven

 Rubber shock-mounts to absorb vibration

 Electric horn activated by push button in the cab

 Gel cell maintenance free battery

 Document holder inside the cab

 Excavator type, with 12 lower rollers

 750 mm (29.5 in) triple grousers

 Full length chain guides/rock guards

 Made of heavily cross-braced rectangular steel tubing

 Rear deck is stationary during both angle and vertical drilling modes

 Viewing hatch in rear deck, hydraulically operated from cab to help spotting holes

 Four (4) hydraulic leveling jacks (152 cm/60 in)

 Dust chamber clean-out door

 Centralized lubrication system (34 points)

 Additional mast rests mounted on non-drill end

 1325 L (350 gal) fuel tank under engine: - Additional fuel tank available as option

 1570 L (415 gal) additional fuel tank under compressor

 4 × 8D batteries

 Hydraulically operated from the cab

 Maximum ambient cooling capacity of 52° C (125° F) with replaceable cores

 Two (2) variable displacement axial piston pumps, in closed loop system, that operate the drill rotation, pulldown/hoist system, and tram functions

 Double-gear pump, in open loop system, for all auxiliary functions and fan circuit

 Dual filtration

 Top sub adapter

 Table bushing

 Bit sub [note: 12 m/39 ft configuration: 342 cm (135 in) S-S, 15 m/49 ft configuration: 152 cm (60 in) S-S]

 Horseshoe bushing

 Bit basket

 Hoist plug (lifting bail)

 Auto tool wrench/deck wrench

 See Optional Equipment and select the required system

 Standard Caterpillar Colors

 Backup alarm

 Filter kit for 50-hour preventive maintenance

 Two (2) hard copy sets Operator/Service/Maintenance/Parts/Engine manuals, in English

 One Link-One Parts manual on CD, Operator and Service manual in pdf

 Seven (7) 60-watt LED lights for night drilling

 Side walkways and handrails with side boarding ladder

 Tool box, mounted under walkway (tools not included)

 Lift kit

 Towing hooks (front end)

 Battery disconnect

dB rating of 80 or less

 The MD6240 is designed to drill from 152-244 mm (6-9.625 in) diameter holes with rated pulldown and hoist capacity up to 22 680 kg (50,000 lb), in Rotary or Down the Hole applications.

 Metal turbo and exhaust manifold covers

 Engine pre-lube

 Additional filtration

 Coolant conditioner

 152-270 mm (6-105⁄8 in) hole diameter

 Up to 22 680 kg (50,000 lb) rated single cylinder pulldown/hoist system

 Up to 24 000 kg (52,911 lb) bit load with one pipe in the drill string

 Patented HOBO (Hydraulically Operated Break-Out) wrench operated from the cab

 Auto cable tensioning system

 25° angle drilling package and mast locks

 Winch system 1587 kg (3,500 lb) capacity

 Single motor

 Rotation speed 0-100 rpm

 Up to 13 016 N·m (9,600 ft-lb) torque

 Integrated FOPS

 Totally enclosed, insulated, two-man cab

 Two (2) hinged doors with heavy duty freezer type door latch system

 Ten (10) windows (safety glass, tinted)

 Windshield wiper and washer kit

 Electric over hydraulic drill functions

 Auxiliary functions operated by fingertip toggle switches

 More than 3 m2 (32.4 ft2) of floor space

 Excellent visibility

 dB rating of 80 or less

 Wall mounted air conditioner/heater/pressurizer, belt driven

 Rubber shock-mounts to absorb vibration

 Electric horn activated by push button in the cab

 Gel cell maintenance free battery

 Document holder inside the cab

 Excavator type, with 12 lower rollers

 750 mm (29.5 in) triple grousers

 Full length chain guides/rock guards

 Made of heavily cross-braced rectangular steel tubing

 Rear deck is stationary during both angle and vertical drilling modes

 Viewing hatch in rear deck, hydraulically operated from cab to help spotting holes

 Four (4) hydraulic leveling jacks (152 cm/60 in)

 Dust chamber clean-out door

 Centralized lubrication system (34 points)

 Additional mast rests mounted on non-drill end

 1325 L (350 gal) fuel tank under engine: - Additional fuel tank available as option

 1570 L (415 gal) additional fuel tank under compressor

 4 × 8D batteries

 Hydraulically operated from the cab

 Maximum ambient cooling capacity of 52° C (125° F) with replaceable cores

 Two (2) variable displacement axial piston pumps, in closed loop system, that operate the drill rotation, pulldown/hoist system, and tram functions

 Double-gear pump, in open loop system, for all auxiliary functions and fan circuit

 Dual filtration

 Top sub adapter

 Table bushing

 Bit sub [note: 12 m/39 ft configuration: 342 cm (135 in) S-S, 15 m/49 ft configuration: 152 cm (60 in) S-S]

 Horseshoe bushing

 Bit basket

 Hoist plug (lifting bail)

 Auto tool wrench/deck wrench

 See Optional Equipment and select the required system

 Standard Caterpillar Colors

 Backup alarm

 Filter kit for 50-hour preventive maintenance

 Two (2) hard copy sets Operator/Service/Maintenance/Parts/Engine manuals, in English

 One Link-One Parts manual on CD, Operator and Service manual in pdf

 Seven (7) 60-watt LED lights for night drilling

 Side walkways and handrails with side boarding ladder

 Tool box, mounted under walkway (tools not included)

 Lift kit

 Towing hooks (front end)

 Battery disconnect

Wall mounted air conditioner/heater/pressurizer, belt driven

 The MD6240 is designed to drill from 152-244 mm (6-9.625 in) diameter holes with rated pulldown and hoist capacity up to 22 680 kg (50,000 lb), in Rotary or Down the Hole applications.

 Metal turbo and exhaust manifold covers

 Engine pre-lube

 Additional filtration

 Coolant conditioner

 152-270 mm (6-105⁄8 in) hole diameter

 Up to 22 680 kg (50,000 lb) rated single cylinder pulldown/hoist system

 Up to 24 000 kg (52,911 lb) bit load with one pipe in the drill string

 Patented HOBO (Hydraulically Operated Break-Out) wrench operated from the cab

 Auto cable tensioning system

 25° angle drilling package and mast locks

 Winch system 1587 kg (3,500 lb) capacity

 Single motor

 Rotation speed 0-100 rpm

 Up to 13 016 N·m (9,600 ft-lb) torque

 Integrated FOPS

 Totally enclosed, insulated, two-man cab

 Two (2) hinged doors with heavy duty freezer type door latch system

 Ten (10) windows (safety glass, tinted)

 Windshield wiper and washer kit

 Electric over hydraulic drill functions

 Auxiliary functions operated by fingertip toggle switches

 More than 3 m2 (32.4 ft2) of floor space

 Excellent visibility

 dB rating of 80 or less

 Wall mounted air conditioner/heater/pressurizer, belt driven

 Rubber shock-mounts to absorb vibration

 Electric horn activated by push button in the cab

 Gel cell maintenance free battery

 Document holder inside the cab

 Excavator type, with 12 lower rollers

 750 mm (29.5 in) triple grousers

 Full length chain guides/rock guards

 Made of heavily cross-braced rectangular steel tubing

 Rear deck is stationary during both angle and vertical drilling modes

 Viewing hatch in rear deck, hydraulically operated from cab to help spotting holes

 Four (4) hydraulic leveling jacks (152 cm/60 in)

 Dust chamber clean-out door

 Centralized lubrication system (34 points)

 Additional mast rests mounted on non-drill end

 1325 L (350 gal) fuel tank under engine: - Additional fuel tank available as option

 1570 L (415 gal) additional fuel tank under compressor

 4 × 8D batteries

 Hydraulically operated from the cab

 Maximum ambient cooling capacity of 52° C (125° F) with replaceable cores

 Two (2) variable displacement axial piston pumps, in closed loop system, that operate the drill rotation, pulldown/hoist system, and tram functions

 Double-gear pump, in open loop system, for all auxiliary functions and fan circuit

 Dual filtration

 Top sub adapter

 Table bushing

 Bit sub [note: 12 m/39 ft configuration: 342 cm (135 in) S-S, 15 m/49 ft configuration: 152 cm (60 in) S-S]

 Horseshoe bushing

 Bit basket

 Hoist plug (lifting bail)

 Auto tool wrench/deck wrench

 See Optional Equipment and select the required system

 Standard Caterpillar Colors

 Backup alarm

 Filter kit for 50-hour preventive maintenance

 Two (2) hard copy sets Operator/Service/Maintenance/Parts/Engine manuals, in English

 One Link-One Parts manual on CD, Operator and Service manual in pdf

 Seven (7) 60-watt LED lights for night drilling

 Side walkways and handrails with side boarding ladder

 Tool box, mounted under walkway (tools not included)

 Lift kit

 Towing hooks (front end)

 Battery disconnect

Rubber shock-mounts to absorb vibration

 The MD6240 is designed to drill from 152-244 mm (6-9.625 in) diameter holes with rated pulldown and hoist capacity up to 22 680 kg (50,000 lb), in Rotary or Down the Hole applications.

 Metal turbo and exhaust manifold covers

 Engine pre-lube

 Additional filtration

 Coolant conditioner

 152-270 mm (6-105⁄8 in) hole diameter

 Up to 22 680 kg (50,000 lb) rated single cylinder pulldown/hoist system

 Up to 24 000 kg (52,911 lb) bit load with one pipe in the drill string

 Patented HOBO (Hydraulically Operated Break-Out) wrench operated from the cab

 Auto cable tensioning system

 25° angle drilling package and mast locks

 Winch system 1587 kg (3,500 lb) capacity

 Single motor

 Rotation speed 0-100 rpm

 Up to 13 016 N·m (9,600 ft-lb) torque

 Integrated FOPS

 Totally enclosed, insulated, two-man cab

 Two (2) hinged doors with heavy duty freezer type door latch system

 Ten (10) windows (safety glass, tinted)

 Windshield wiper and washer kit

 Electric over hydraulic drill functions

 Auxiliary functions operated by fingertip toggle switches

 More than 3 m2 (32.4 ft2) of floor space

 Excellent visibility

 dB rating of 80 or less

 Wall mounted air conditioner/heater/pressurizer, belt driven

 Rubber shock-mounts to absorb vibration

 Electric horn activated by push button in the cab

 Gel cell maintenance free battery

 Document holder inside the cab

 Excavator type, with 12 lower rollers

 750 mm (29.5 in) triple grousers

 Full length chain guides/rock guards

 Made of heavily cross-braced rectangular steel tubing

 Rear deck is stationary during both angle and vertical drilling modes

 Viewing hatch in rear deck, hydraulically operated from cab to help spotting holes

 Four (4) hydraulic leveling jacks (152 cm/60 in)

 Dust chamber clean-out door

 Centralized lubrication system (34 points)

 Additional mast rests mounted on non-drill end

 1325 L (350 gal) fuel tank under engine: - Additional fuel tank available as option

 1570 L (415 gal) additional fuel tank under compressor

 4 × 8D batteries

 Hydraulically operated from the cab

 Maximum ambient cooling capacity of 52° C (125° F) with replaceable cores

 Two (2) variable displacement axial piston pumps, in closed loop system, that operate the drill rotation, pulldown/hoist system, and tram functions

 Double-gear pump, in open loop system, for all auxiliary functions and fan circuit

 Dual filtration

 Top sub adapter

 Table bushing

 Bit sub [note: 12 m/39 ft configuration: 342 cm (135 in) S-S, 15 m/49 ft configuration: 152 cm (60 in) S-S]

 Horseshoe bushing

 Bit basket

 Hoist plug (lifting bail)

 Auto tool wrench/deck wrench

 See Optional Equipment and select the required system

 Standard Caterpillar Colors

 Backup alarm

 Filter kit for 50-hour preventive maintenance

 Two (2) hard copy sets Operator/Service/Maintenance/Parts/Engine manuals, in English

 One Link-One Parts manual on CD, Operator and Service manual in pdf

 Seven (7) 60-watt LED lights for night drilling

 Side walkways and handrails with side boarding ladder

 Tool box, mounted under walkway (tools not included)

 Lift kit

 Towing hooks (front end)

 Battery disconnect

Electric horn activated by push button in the cab

 The MD6240 is designed to drill from 152-244 mm (6-9.625 in) diameter holes with rated pulldown and hoist capacity up to 22 680 kg (50,000 lb), in Rotary or Down the Hole applications.

 Metal turbo and exhaust manifold covers

 Engine pre-lube

 Additional filtration

 Coolant conditioner

 152-270 mm (6-105⁄8 in) hole diameter

 Up to 22 680 kg (50,000 lb) rated single cylinder pulldown/hoist system

 Up to 24 000 kg (52,911 lb) bit load with one pipe in the drill string

 Patented HOBO (Hydraulically Operated Break-Out) wrench operated from the cab

 Auto cable tensioning system

 25° angle drilling package and mast locks

 Winch system 1587 kg (3,500 lb) capacity

 Single motor

 Rotation speed 0-100 rpm

 Up to 13 016 N·m (9,600 ft-lb) torque

 Integrated FOPS

 Totally enclosed, insulated, two-man cab

 Two (2) hinged doors with heavy duty freezer type door latch system

 Ten (10) windows (safety glass, tinted)

 Windshield wiper and washer kit

 Electric over hydraulic drill functions

 Auxiliary functions operated by fingertip toggle switches

 More than 3 m2 (32.4 ft2) of floor space

 Excellent visibility

 dB rating of 80 or less

 Wall mounted air conditioner/heater/pressurizer, belt driven

 Rubber shock-mounts to absorb vibration

 Electric horn activated by push button in the cab

 Gel cell maintenance free battery

 Document holder inside the cab

 Excavator type, with 12 lower rollers

 750 mm (29.5 in) triple grousers

 Full length chain guides/rock guards

 Made of heavily cross-braced rectangular steel tubing

 Rear deck is stationary during both angle and vertical drilling modes

 Viewing hatch in rear deck, hydraulically operated from cab to help spotting holes

 Four (4) hydraulic leveling jacks (152 cm/60 in)

 Dust chamber clean-out door

 Centralized lubrication system (34 points)

 Additional mast rests mounted on non-drill end

 1325 L (350 gal) fuel tank under engine: - Additional fuel tank available as option

 1570 L (415 gal) additional fuel tank under compressor

 4 × 8D batteries

 Hydraulically operated from the cab

 Maximum ambient cooling capacity of 52° C (125° F) with replaceable cores

 Two (2) variable displacement axial piston pumps, in closed loop system, that operate the drill rotation, pulldown/hoist system, and tram functions

 Double-gear pump, in open loop system, for all auxiliary functions and fan circuit

 Dual filtration

 Top sub adapter

 Table bushing

 Bit sub [note: 12 m/39 ft configuration: 342 cm (135 in) S-S, 15 m/49 ft configuration: 152 cm (60 in) S-S]

 Horseshoe bushing

 Bit basket

 Hoist plug (lifting bail)

 Auto tool wrench/deck wrench

 See Optional Equipment and select the required system

 Standard Caterpillar Colors

 Backup alarm

 Filter kit for 50-hour preventive maintenance

 Two (2) hard copy sets Operator/Service/Maintenance/Parts/Engine manuals, in English

 One Link-One Parts manual on CD, Operator and Service manual in pdf

 Seven (7) 60-watt LED lights for night drilling

 Side walkways and handrails with side boarding ladder

 Tool box, mounted under walkway (tools not included)

 Lift kit

 Towing hooks (front end)

 Battery disconnect

Gel cell maintenance free battery

 The MD6240 is designed to drill from 152-244 mm (6-9.625 in) diameter holes with rated pulldown and hoist capacity up to 22 680 kg (50,000 lb), in Rotary or Down the Hole applications.

 Metal turbo and exhaust manifold covers

 Engine pre-lube

 Additional filtration

 Coolant conditioner

 152-270 mm (6-105⁄8 in) hole diameter

 Up to 22 680 kg (50,000 lb) rated single cylinder pulldown/hoist system

 Up to 24 000 kg (52,911 lb) bit load with one pipe in the drill string

 Patented HOBO (Hydraulically Operated Break-Out) wrench operated from the cab

 Auto cable tensioning system

 25° angle drilling package and mast locks

 Winch system 1587 kg (3,500 lb) capacity

 Single motor

 Rotation speed 0-100 rpm

 Up to 13 016 N·m (9,600 ft-lb) torque

 Integrated FOPS

 Totally enclosed, insulated, two-man cab

 Two (2) hinged doors with heavy duty freezer type door latch system

 Ten (10) windows (safety glass, tinted)

 Windshield wiper and washer kit

 Electric over hydraulic drill functions

 Auxiliary functions operated by fingertip toggle switches

 More than 3 m2 (32.4 ft2) of floor space

 Excellent visibility

 dB rating of 80 or less

 Wall mounted air conditioner/heater/pressurizer, belt driven

 Rubber shock-mounts to absorb vibration

 Electric horn activated by push button in the cab

 Gel cell maintenance free battery

 Document holder inside the cab

 Excavator type, with 12 lower rollers

 750 mm (29.5 in) triple grousers

 Full length chain guides/rock guards

 Made of heavily cross-braced rectangular steel tubing

 Rear deck is stationary during both angle and vertical drilling modes

 Viewing hatch in rear deck, hydraulically operated from cab to help spotting holes

 Four (4) hydraulic leveling jacks (152 cm/60 in)

 Dust chamber clean-out door

 Centralized lubrication system (34 points)

 Additional mast rests mounted on non-drill end

 1325 L (350 gal) fuel tank under engine: - Additional fuel tank available as option

 1570 L (415 gal) additional fuel tank under compressor

 4 × 8D batteries

 Hydraulically operated from the cab

 Maximum ambient cooling capacity of 52° C (125° F) with replaceable cores

 Two (2) variable displacement axial piston pumps, in closed loop system, that operate the drill rotation, pulldown/hoist system, and tram functions

 Double-gear pump, in open loop system, for all auxiliary functions and fan circuit

 Dual filtration

 Top sub adapter

 Table bushing

 Bit sub [note: 12 m/39 ft configuration: 342 cm (135 in) S-S, 15 m/49 ft configuration: 152 cm (60 in) S-S]

 Horseshoe bushing

 Bit basket

 Hoist plug (lifting bail)

 Auto tool wrench/deck wrench

 See Optional Equipment and select the required system

 Standard Caterpillar Colors

 Backup alarm

 Filter kit for 50-hour preventive maintenance

 Two (2) hard copy sets Operator/Service/Maintenance/Parts/Engine manuals, in English

 One Link-One Parts manual on CD, Operator and Service manual in pdf

 Seven (7) 60-watt LED lights for night drilling

 Side walkways and handrails with side boarding ladder

 Tool box, mounted under walkway (tools not included)

 Lift kit

 Towing hooks (front end)

 Battery disconnect

Document holder inside the cab

 The MD6240 is designed to drill from 152-244 mm (6-9.625 in) diameter holes with rated pulldown and hoist capacity up to 22 680 kg (50,000 lb), in Rotary or Down the Hole applications.

 Metal turbo and exhaust manifold covers

 Engine pre-lube

 Additional filtration

 Coolant conditioner

 152-270 mm (6-105⁄8 in) hole diameter

 Up to 22 680 kg (50,000 lb) rated single cylinder pulldown/hoist system

 Up to 24 000 kg (52,911 lb) bit load with one pipe in the drill string

 Patented HOBO (Hydraulically Operated Break-Out) wrench operated from the cab

 Auto cable tensioning system

 25° angle drilling package and mast locks

 Winch system 1587 kg (3,500 lb) capacity

 Single motor

 Rotation speed 0-100 rpm

 Up to 13 016 N·m (9,600 ft-lb) torque

 Integrated FOPS

 Totally enclosed, insulated, two-man cab

 Two (2) hinged doors with heavy duty freezer type door latch system

 Ten (10) windows (safety glass, tinted)

 Windshield wiper and washer kit

 Electric over hydraulic drill functions

 Auxiliary functions operated by fingertip toggle switches

 More than 3 m2 (32.4 ft2) of floor space

 Excellent visibility

 dB rating of 80 or less

 Wall mounted air conditioner/heater/pressurizer, belt driven

 Rubber shock-mounts to absorb vibration

 Electric horn activated by push button in the cab

 Gel cell maintenance free battery

 Document holder inside the cab

 Excavator type, with 12 lower rollers

 750 mm (29.5 in) triple grousers

 Full length chain guides/rock guards

 Made of heavily cross-braced rectangular steel tubing

 Rear deck is stationary during both angle and vertical drilling modes

 Viewing hatch in rear deck, hydraulically operated from cab to help spotting holes

 Four (4) hydraulic leveling jacks (152 cm/60 in)

 Dust chamber clean-out door

 Centralized lubrication system (34 points)

 Additional mast rests mounted on non-drill end

 1325 L (350 gal) fuel tank under engine: - Additional fuel tank available as option

 1570 L (415 gal) additional fuel tank under compressor

 4 × 8D batteries

 Hydraulically operated from the cab

 Maximum ambient cooling capacity of 52° C (125° F) with replaceable cores

 Two (2) variable displacement axial piston pumps, in closed loop system, that operate the drill rotation, pulldown/hoist system, and tram functions

 Double-gear pump, in open loop system, for all auxiliary functions and fan circuit

 Dual filtration

 Top sub adapter

 Table bushing

 Bit sub [note: 12 m/39 ft configuration: 342 cm (135 in) S-S, 15 m/49 ft configuration: 152 cm (60 in) S-S]

 Horseshoe bushing

 Bit basket

 Hoist plug (lifting bail)

 Auto tool wrench/deck wrench

 See Optional Equipment and select the required system

 Standard Caterpillar Colors

 Backup alarm

 Filter kit for 50-hour preventive maintenance

 Two (2) hard copy sets Operator/Service/Maintenance/Parts/Engine manuals, in English

 One Link-One Parts manual on CD, Operator and Service manual in pdf

 Seven (7) 60-watt LED lights for night drilling

 Side walkways and handrails with side boarding ladder

 Tool box, mounted under walkway (tools not included)

 Lift kit

 Towing hooks (front end)

 Battery disconnect

UNDERCARRIAGE

 Excavator type, with 12 lower rollers

 750 mm (29.5 in) triple grousers

 Full length chain guides/rock guards

MAINFRAME AND DECK

 Made of heavily cross-braced rectangular steel tubing

 Rear deck is stationary during both angle and vertical drilling modes

 Viewing hatch in rear deck, hydraulically operated from cab to help spotting holes

 Four (4) hydraulic leveling jacks (152 cm/60 in)

 Dust chamber clean-out door

 Centralized lubrication system (34 points)

 Additional mast rests mounted on non-drill end

 1325 L (350 gal) fuel tank under engine: - Additional fuel tank available as option

 1570 L (415 gal) additional fuel tank under compressor

 4 × 8D batteries

CAROUSEL

 Hydraulically operated from the cab

COOLING - SPLIT COOLER ARRANGEMENT

 Maximum ambient cooling capacity of 52° C (125° F) with replaceable cores

HYDRAULIC SYSTEM

 Two (2) variable displacement axial piston pumps, in closed loop system, that operate the drill rotation, pulldown/hoist system, and tram functions

 Double-gear pump, in open loop system, for all auxiliary functions and fan circuit

 Dual filtration

Two (2) variable displacement axial piston pumps, in closed loop system, that operate the drill rotation, pulldown/hoist system, and tram functions

 The MD6240 is designed to drill from 152-244 mm (6-9.625 in) diameter holes with rated pulldown and hoist capacity up to 22 680 kg (50,000 lb), in Rotary or Down the Hole applications.

 Metal turbo and exhaust manifold covers

 Engine pre-lube

 Additional filtration

 Coolant conditioner

 152-270 mm (6-105⁄8 in) hole diameter

 Up to 22 680 kg (50,000 lb) rated single cylinder pulldown/hoist system

 Up to 24 000 kg (52,911 lb) bit load with one pipe in the drill string

 Patented HOBO (Hydraulically Operated Break-Out) wrench operated from the cab

 Auto cable tensioning system

 25° angle drilling package and mast locks

 Winch system 1587 kg (3,500 lb) capacity

 Single motor

 Rotation speed 0-100 rpm

 Up to 13 016 N·m (9,600 ft-lb) torque

 Integrated FOPS

 Totally enclosed, insulated, two-man cab

 Two (2) hinged doors with heavy duty freezer type door latch system

 Ten (10) windows (safety glass, tinted)

 Windshield wiper and washer kit

 Electric over hydraulic drill functions

 Auxiliary functions operated by fingertip toggle switches

 More than 3 m2 (32.4 ft2) of floor space

 Excellent visibility

 dB rating of 80 or less

 Wall mounted air conditioner/heater/pressurizer, belt driven

 Rubber shock-mounts to absorb vibration

 Electric horn activated by push button in the cab

 Gel cell maintenance free battery

 Document holder inside the cab

 Excavator type, with 12 lower rollers

 750 mm (29.5 in) triple grousers

 Full length chain guides/rock guards

 Made of heavily cross-braced rectangular steel tubing

 Rear deck is stationary during both angle and vertical drilling modes

 Viewing hatch in rear deck, hydraulically operated from cab to help spotting holes

 Four (4) hydraulic leveling jacks (152 cm/60 in)

 Dust chamber clean-out door

 Centralized lubrication system (34 points)

 Additional mast rests mounted on non-drill end

 1325 L (350 gal) fuel tank under engine: - Additional fuel tank available as option

 1570 L (415 gal) additional fuel tank under compressor

 4 × 8D batteries

 Hydraulically operated from the cab

 Maximum ambient cooling capacity of 52° C (125° F) with replaceable cores

 Two (2) variable displacement axial piston pumps, in closed loop system, that operate the drill rotation, pulldown/hoist system, and tram functions

 Double-gear pump, in open loop system, for all auxiliary functions and fan circuit

 Dual filtration

 Top sub adapter

 Table bushing

 Bit sub [note: 12 m/39 ft configuration: 342 cm (135 in) S-S, 15 m/49 ft configuration: 152 cm (60 in) S-S]

 Horseshoe bushing

 Bit basket

 Hoist plug (lifting bail)

 Auto tool wrench/deck wrench

 See Optional Equipment and select the required system

 Standard Caterpillar Colors

 Backup alarm

 Filter kit for 50-hour preventive maintenance

 Two (2) hard copy sets Operator/Service/Maintenance/Parts/Engine manuals, in English

 One Link-One Parts manual on CD, Operator and Service manual in pdf

 Seven (7) 60-watt LED lights for night drilling

 Side walkways and handrails with side boarding ladder

 Tool box, mounted under walkway (tools not included)

 Lift kit

 Towing hooks (front end)

 Battery disconnect

Double-gear pump, in open loop system, for all auxiliary functions and fan circuit

 The MD6240 is designed to drill from 152-244 mm (6-9.625 in) diameter holes with rated pulldown and hoist capacity up to 22 680 kg (50,000 lb), in Rotary or Down the Hole applications.

 Metal turbo and exhaust manifold covers

 Engine pre-lube

 Additional filtration

 Coolant conditioner

 152-270 mm (6-105⁄8 in) hole diameter

 Up to 22 680 kg (50,000 lb) rated single cylinder pulldown/hoist system

 Up to 24 000 kg (52,911 lb) bit load with one pipe in the drill string

 Patented HOBO (Hydraulically Operated Break-Out) wrench operated from the cab

 Auto cable tensioning system

 25° angle drilling package and mast locks

 Winch system 1587 kg (3,500 lb) capacity

 Single motor

 Rotation speed 0-100 rpm

 Up to 13 016 N·m (9,600 ft-lb) torque

 Integrated FOPS

 Totally enclosed, insulated, two-man cab

 Two (2) hinged doors with heavy duty freezer type door latch system

 Ten (10) windows (safety glass, tinted)

 Windshield wiper and washer kit

 Electric over hydraulic drill functions

 Auxiliary functions operated by fingertip toggle switches

 More than 3 m2 (32.4 ft2) of floor space

 Excellent visibility

 dB rating of 80 or less

 Wall mounted air conditioner/heater/pressurizer, belt driven

 Rubber shock-mounts to absorb vibration

 Electric horn activated by push button in the cab

 Gel cell maintenance free battery

 Document holder inside the cab

 Excavator type, with 12 lower rollers

 750 mm (29.5 in) triple grousers

 Full length chain guides/rock guards

 Made of heavily cross-braced rectangular steel tubing

 Rear deck is stationary during both angle and vertical drilling modes

 Viewing hatch in rear deck, hydraulically operated from cab to help spotting holes

 Four (4) hydraulic leveling jacks (152 cm/60 in)

 Dust chamber clean-out door

 Centralized lubrication system (34 points)

 Additional mast rests mounted on non-drill end

 1325 L (350 gal) fuel tank under engine: - Additional fuel tank available as option

 1570 L (415 gal) additional fuel tank under compressor

 4 × 8D batteries

 Hydraulically operated from the cab

 Maximum ambient cooling capacity of 52° C (125° F) with replaceable cores

 Two (2) variable displacement axial piston pumps, in closed loop system, that operate the drill rotation, pulldown/hoist system, and tram functions

 Double-gear pump, in open loop system, for all auxiliary functions and fan circuit

 Dual filtration

 Top sub adapter

 Table bushing

 Bit sub [note: 12 m/39 ft configuration: 342 cm (135 in) S-S, 15 m/49 ft configuration: 152 cm (60 in) S-S]

 Horseshoe bushing

 Bit basket

 Hoist plug (lifting bail)

 Auto tool wrench/deck wrench

 See Optional Equipment and select the required system

 Standard Caterpillar Colors

 Backup alarm

 Filter kit for 50-hour preventive maintenance

 Two (2) hard copy sets Operator/Service/Maintenance/Parts/Engine manuals, in English

 One Link-One Parts manual on CD, Operator and Service manual in pdf

 Seven (7) 60-watt LED lights for night drilling

 Side walkways and handrails with side boarding ladder

 Tool box, mounted under walkway (tools not included)

 Lift kit

 Towing hooks (front end)

 Battery disconnect

Dual filtration

 The MD6240 is designed to drill from 152-244 mm (6-9.625 in) diameter holes with rated pulldown and hoist capacity up to 22 680 kg (50,000 lb), in Rotary or Down the Hole applications.

 Metal turbo and exhaust manifold covers

 Engine pre-lube

 Additional filtration

 Coolant conditioner

 152-270 mm (6-105⁄8 in) hole diameter

 Up to 22 680 kg (50,000 lb) rated single cylinder pulldown/hoist system

 Up to 24 000 kg (52,911 lb) bit load with one pipe in the drill string

 Patented HOBO (Hydraulically Operated Break-Out) wrench operated from the cab

 Auto cable tensioning system

 25° angle drilling package and mast locks

 Winch system 1587 kg (3,500 lb) capacity

 Single motor

 Rotation speed 0-100 rpm

 Up to 13 016 N·m (9,600 ft-lb) torque

 Integrated FOPS

 Totally enclosed, insulated, two-man cab

 Two (2) hinged doors with heavy duty freezer type door latch system

 Ten (10) windows (safety glass, tinted)

 Windshield wiper and washer kit

 Electric over hydraulic drill functions

 Auxiliary functions operated by fingertip toggle switches

 More than 3 m2 (32.4 ft2) of floor space

 Excellent visibility

 dB rating of 80 or less

 Wall mounted air conditioner/heater/pressurizer, belt driven

 Rubber shock-mounts to absorb vibration

 Electric horn activated by push button in the cab

 Gel cell maintenance free battery

 Document holder inside the cab

 Excavator type, with 12 lower rollers

 750 mm (29.5 in) triple grousers

 Full length chain guides/rock guards

 Made of heavily cross-braced rectangular steel tubing

 Rear deck is stationary during both angle and vertical drilling modes

 Viewing hatch in rear deck, hydraulically operated from cab to help spotting holes

 Four (4) hydraulic leveling jacks (152 cm/60 in)

 Dust chamber clean-out door

 Centralized lubrication system (34 points)

 Additional mast rests mounted on non-drill end

 1325 L (350 gal) fuel tank under engine: - Additional fuel tank available as option

 1570 L (415 gal) additional fuel tank under compressor

 4 × 8D batteries

 Hydraulically operated from the cab

 Maximum ambient cooling capacity of 52° C (125° F) with replaceable cores

 Two (2) variable displacement axial piston pumps, in closed loop system, that operate the drill rotation, pulldown/hoist system, and tram functions

 Double-gear pump, in open loop system, for all auxiliary functions and fan circuit

 Dual filtration

 Top sub adapter

 Table bushing

 Bit sub [note: 12 m/39 ft configuration: 342 cm (135 in) S-S, 15 m/49 ft configuration: 152 cm (60 in) S-S]

 Horseshoe bushing

 Bit basket

 Hoist plug (lifting bail)

 Auto tool wrench/deck wrench

 See Optional Equipment and select the required system

 Standard Caterpillar Colors

 Backup alarm

 Filter kit for 50-hour preventive maintenance

 Two (2) hard copy sets Operator/Service/Maintenance/Parts/Engine manuals, in English

 One Link-One Parts manual on CD, Operator and Service manual in pdf

 Seven (7) 60-watt LED lights for night drilling

 Side walkways and handrails with side boarding ladder

 Tool box, mounted under walkway (tools not included)

 Lift kit

 Towing hooks (front end)

 Battery disconnect

DRILLING ACCESSORIES (TRICONE/ROTARY)

 Top sub adapter

 Table bushing

 Bit sub [note: 12 m/39 ft configuration: 342 cm (135 in) S-S, 15 m/49 ft configuration: 152 cm (60 in) S-S]

 Horseshoe bushing

 Bit basket

 Hoist plug (lifting bail)

 Auto tool wrench/deck wrench

DUST SYSTEM

 See Optional Equipment and select the required system

See Optional Equipment and select the required system

 The MD6240 is designed to drill from 152-244 mm (6-9.625 in) diameter holes with rated pulldown and hoist capacity up to 22 680 kg (50,000 lb), in Rotary or Down the Hole applications.

 Metal turbo and exhaust manifold covers

 Engine pre-lube

 Additional filtration

 Coolant conditioner

 152-270 mm (6-105⁄8 in) hole diameter

 Up to 22 680 kg (50,000 lb) rated single cylinder pulldown/hoist system

 Up to 24 000 kg (52,911 lb) bit load with one pipe in the drill string

 Patented HOBO (Hydraulically Operated Break-Out) wrench operated from the cab

 Auto cable tensioning system

 25° angle drilling package and mast locks

 Winch system 1587 kg (3,500 lb) capacity

 Single motor

 Rotation speed 0-100 rpm

 Up to 13 016 N·m (9,600 ft-lb) torque

 Integrated FOPS

 Totally enclosed, insulated, two-man cab

 Two (2) hinged doors with heavy duty freezer type door latch system

 Ten (10) windows (safety glass, tinted)

 Windshield wiper and washer kit

 Electric over hydraulic drill functions

 Auxiliary functions operated by fingertip toggle switches

 More than 3 m2 (32.4 ft2) of floor space

 Excellent visibility

 dB rating of 80 or less

 Wall mounted air conditioner/heater/pressurizer, belt driven

 Rubber shock-mounts to absorb vibration

 Electric horn activated by push button in the cab

 Gel cell maintenance free battery

 Document holder inside the cab

 Excavator type, with 12 lower rollers

 750 mm (29.5 in) triple grousers

 Full length chain guides/rock guards

 Made of heavily cross-braced rectangular steel tubing

 Rear deck is stationary during both angle and vertical drilling modes

 Viewing hatch in rear deck, hydraulically operated from cab to help spotting holes

 Four (4) hydraulic leveling jacks (152 cm/60 in)

 Dust chamber clean-out door

 Centralized lubrication system (34 points)

 Additional mast rests mounted on non-drill end

 1325 L (350 gal) fuel tank under engine: - Additional fuel tank available as option

 1570 L (415 gal) additional fuel tank under compressor

 4 × 8D batteries

 Hydraulically operated from the cab

 Maximum ambient cooling capacity of 52° C (125° F) with replaceable cores

 Two (2) variable displacement axial piston pumps, in closed loop system, that operate the drill rotation, pulldown/hoist system, and tram functions

 Double-gear pump, in open loop system, for all auxiliary functions and fan circuit

 Dual filtration

 Top sub adapter

 Table bushing

 Bit sub [note: 12 m/39 ft configuration: 342 cm (135 in) S-S, 15 m/49 ft configuration: 152 cm (60 in) S-S]

 Horseshoe bushing

 Bit basket

 Hoist plug (lifting bail)

 Auto tool wrench/deck wrench

 See Optional Equipment and select the required system

 Standard Caterpillar Colors

 Backup alarm

 Filter kit for 50-hour preventive maintenance

 Two (2) hard copy sets Operator/Service/Maintenance/Parts/Engine manuals, in English

 One Link-One Parts manual on CD, Operator and Service manual in pdf

 Seven (7) 60-watt LED lights for night drilling

 Side walkways and handrails with side boarding ladder

 Tool box, mounted under walkway (tools not included)

 Lift kit

 Towing hooks (front end)

 Battery disconnect

PAINT

 Standard Caterpillar Colors

Standard Caterpillar Colors

 The MD6240 is designed to drill from 152-244 mm (6-9.625 in) diameter holes with rated pulldown and hoist capacity up to 22 680 kg (50,000 lb), in Rotary or Down the Hole applications.

 Metal turbo and exhaust manifold covers

 Engine pre-lube

 Additional filtration

 Coolant conditioner

 152-270 mm (6-105⁄8 in) hole diameter

 Up to 22 680 kg (50,000 lb) rated single cylinder pulldown/hoist system

 Up to 24 000 kg (52,911 lb) bit load with one pipe in the drill string

 Patented HOBO (Hydraulically Operated Break-Out) wrench operated from the cab

 Auto cable tensioning system

 25° angle drilling package and mast locks

 Winch system 1587 kg (3,500 lb) capacity

 Single motor

 Rotation speed 0-100 rpm

 Up to 13 016 N·m (9,600 ft-lb) torque

 Integrated FOPS

 Totally enclosed, insulated, two-man cab

 Two (2) hinged doors with heavy duty freezer type door latch system

 Ten (10) windows (safety glass, tinted)

 Windshield wiper and washer kit

 Electric over hydraulic drill functions

 Auxiliary functions operated by fingertip toggle switches

 More than 3 m2 (32.4 ft2) of floor space

 Excellent visibility

 dB rating of 80 or less

 Wall mounted air conditioner/heater/pressurizer, belt driven

 Rubber shock-mounts to absorb vibration

 Electric horn activated by push button in the cab

 Gel cell maintenance free battery

 Document holder inside the cab

 Excavator type, with 12 lower rollers

 750 mm (29.5 in) triple grousers

 Full length chain guides/rock guards

 Made of heavily cross-braced rectangular steel tubing

 Rear deck is stationary during both angle and vertical drilling modes

 Viewing hatch in rear deck, hydraulically operated from cab to help spotting holes

 Four (4) hydraulic leveling jacks (152 cm/60 in)

 Dust chamber clean-out door

 Centralized lubrication system (34 points)

 Additional mast rests mounted on non-drill end

 1325 L (350 gal) fuel tank under engine: - Additional fuel tank available as option

 1570 L (415 gal) additional fuel tank under compressor

 4 × 8D batteries

 Hydraulically operated from the cab

 Maximum ambient cooling capacity of 52° C (125° F) with replaceable cores

 Two (2) variable displacement axial piston pumps, in closed loop system, that operate the drill rotation, pulldown/hoist system, and tram functions

 Double-gear pump, in open loop system, for all auxiliary functions and fan circuit

 Dual filtration

 Top sub adapter

 Table bushing

 Bit sub [note: 12 m/39 ft configuration: 342 cm (135 in) S-S, 15 m/49 ft configuration: 152 cm (60 in) S-S]

 Horseshoe bushing

 Bit basket

 Hoist plug (lifting bail)

 Auto tool wrench/deck wrench

 See Optional Equipment and select the required system

 Standard Caterpillar Colors

 Backup alarm

 Filter kit for 50-hour preventive maintenance

 Two (2) hard copy sets Operator/Service/Maintenance/Parts/Engine manuals, in English

 One Link-One Parts manual on CD, Operator and Service manual in pdf

 Seven (7) 60-watt LED lights for night drilling

 Side walkways and handrails with side boarding ladder

 Tool box, mounted under walkway (tools not included)

 Lift kit

 Towing hooks (front end)

 Battery disconnect

OTHER

 Backup alarm

 Filter kit for 50-hour preventive maintenance

 Two (2) hard copy sets Operator/Service/Maintenance/Parts/Engine manuals, in English

 One Link-One Parts manual on CD, Operator and Service manual in pdf

 Seven (7) 60-watt LED lights for night drilling

 Side walkways and handrails with side boarding ladder

 Tool box, mounted under walkway (tools not included)

 Lift kit

 Towing hooks (front end)

 Battery disconnect

Backup alarm

 The MD6240 is designed to drill from 152-244 mm (6-9.625 in) diameter holes with rated pulldown and hoist capacity up to 22 680 kg (50,000 lb), in Rotary or Down the Hole applications.

 Metal turbo and exhaust manifold covers

 Engine pre-lube

 Additional filtration

 Coolant conditioner

 152-270 mm (6-105⁄8 in) hole diameter

 Up to 22 680 kg (50,000 lb) rated single cylinder pulldown/hoist system

 Up to 24 000 kg (52,911 lb) bit load with one pipe in the drill string

 Patented HOBO (Hydraulically Operated Break-Out) wrench operated from the cab

 Auto cable tensioning system

 25° angle drilling package and mast locks

 Winch system 1587 kg (3,500 lb) capacity

 Single motor

 Rotation speed 0-100 rpm

 Up to 13 016 N·m (9,600 ft-lb) torque

 Integrated FOPS

 Totally enclosed, insulated, two-man cab

 Two (2) hinged doors with heavy duty freezer type door latch system

 Ten (10) windows (safety glass, tinted)

 Windshield wiper and washer kit

 Electric over hydraulic drill functions

 Auxiliary functions operated by fingertip toggle switches

 More than 3 m2 (32.4 ft2) of floor space

 Excellent visibility

 dB rating of 80 or less

 Wall mounted air conditioner/heater/pressurizer, belt driven

 Rubber shock-mounts to absorb vibration

 Electric horn activated by push button in the cab

 Gel cell maintenance free battery

 Document holder inside the cab

 Excavator type, with 12 lower rollers

 750 mm (29.5 in) triple grousers

 Full length chain guides/rock guards

 Made of heavily cross-braced rectangular steel tubing

 Rear deck is stationary during both angle and vertical drilling modes

 Viewing hatch in rear deck, hydraulically operated from cab to help spotting holes

 Four (4) hydraulic leveling jacks (152 cm/60 in)

 Dust chamber clean-out door

 Centralized lubrication system (34 points)

 Additional mast rests mounted on non-drill end

 1325 L (350 gal) fuel tank under engine: - Additional fuel tank available as option

 1570 L (415 gal) additional fuel tank under compressor

 4 × 8D batteries

 Hydraulically operated from the cab

 Maximum ambient cooling capacity of 52° C (125° F) with replaceable cores

 Two (2) variable displacement axial piston pumps, in closed loop system, that operate the drill rotation, pulldown/hoist system, and tram functions

 Double-gear pump, in open loop system, for all auxiliary functions and fan circuit

 Dual filtration

 Top sub adapter

 Table bushing

 Bit sub [note: 12 m/39 ft configuration: 342 cm (135 in) S-S, 15 m/49 ft configuration: 152 cm (60 in) S-S]

 Horseshoe bushing

 Bit basket

 Hoist plug (lifting bail)

 Auto tool wrench/deck wrench

 See Optional Equipment and select the required system

 Standard Caterpillar Colors

 Backup alarm

 Filter kit for 50-hour preventive maintenance

 Two (2) hard copy sets Operator/Service/Maintenance/Parts/Engine manuals, in English

 One Link-One Parts manual on CD, Operator and Service manual in pdf

 Seven (7) 60-watt LED lights for night drilling

 Side walkways and handrails with side boarding ladder

 Tool box, mounted under walkway (tools not included)

 Lift kit

 Towing hooks (front end)

 Battery disconnect

Filter kit for 50-hour preventive maintenance

 The MD6240 is designed to drill from 152-244 mm (6-9.625 in) diameter holes with rated pulldown and hoist capacity up to 22 680 kg (50,000 lb), in Rotary or Down the Hole applications.

 Metal turbo and exhaust manifold covers

 Engine pre-lube

 Additional filtration

 Coolant conditioner

 152-270 mm (6-105⁄8 in) hole diameter

 Up to 22 680 kg (50,000 lb) rated single cylinder pulldown/hoist system

 Up to 24 000 kg (52,911 lb) bit load with one pipe in the drill string

 Patented HOBO (Hydraulically Operated Break-Out) wrench operated from the cab

 Auto cable tensioning system

 25° angle drilling package and mast locks

 Winch system 1587 kg (3,500 lb) capacity

 Single motor

 Rotation speed 0-100 rpm

 Up to 13 016 N·m (9,600 ft-lb) torque

 Integrated FOPS

 Totally enclosed, insulated, two-man cab

 Two (2) hinged doors with heavy duty freezer type door latch system

 Ten (10) windows (safety glass, tinted)

 Windshield wiper and washer kit

 Electric over hydraulic drill functions

 Auxiliary functions operated by fingertip toggle switches

 More than 3 m2 (32.4 ft2) of floor space

 Excellent visibility

 dB rating of 80 or less

 Wall mounted air conditioner/heater/pressurizer, belt driven

 Rubber shock-mounts to absorb vibration

 Electric horn activated by push button in the cab

 Gel cell maintenance free battery

 Document holder inside the cab

 Excavator type, with 12 lower rollers

 750 mm (29.5 in) triple grousers

 Full length chain guides/rock guards

 Made of heavily cross-braced rectangular steel tubing

 Rear deck is stationary during both angle and vertical drilling modes

 Viewing hatch in rear deck, hydraulically operated from cab to help spotting holes

 Four (4) hydraulic leveling jacks (152 cm/60 in)

 Dust chamber clean-out door

 Centralized lubrication system (34 points)

 Additional mast rests mounted on non-drill end

 1325 L (350 gal) fuel tank under engine: - Additional fuel tank available as option

 1570 L (415 gal) additional fuel tank under compressor

 4 × 8D batteries

 Hydraulically operated from the cab

 Maximum ambient cooling capacity of 52° C (125° F) with replaceable cores

 Two (2) variable displacement axial piston pumps, in closed loop system, that operate the drill rotation, pulldown/hoist system, and tram functions

 Double-gear pump, in open loop system, for all auxiliary functions and fan circuit

 Dual filtration

 Top sub adapter

 Table bushing

 Bit sub [note: 12 m/39 ft configuration: 342 cm (135 in) S-S, 15 m/49 ft configuration: 152 cm (60 in) S-S]

 Horseshoe bushing

 Bit basket

 Hoist plug (lifting bail)

 Auto tool wrench/deck wrench

 See Optional Equipment and select the required system

 Standard Caterpillar Colors

 Backup alarm

 Filter kit for 50-hour preventive maintenance

 Two (2) hard copy sets Operator/Service/Maintenance/Parts/Engine manuals, in English

 One Link-One Parts manual on CD, Operator and Service manual in pdf

 Seven (7) 60-watt LED lights for night drilling

 Side walkways and handrails with side boarding ladder

 Tool box, mounted under walkway (tools not included)

 Lift kit

 Towing hooks (front end)

 Battery disconnect

Two (2) hard copy sets Operator/Service/Maintenance/Parts/Engine manuals, in English

 The MD6240 is designed to drill from 152-244 mm (6-9.625 in) diameter holes with rated pulldown and hoist capacity up to 22 680 kg (50,000 lb), in Rotary or Down the Hole applications.

 Metal turbo and exhaust manifold covers

 Engine pre-lube

 Additional filtration

 Coolant conditioner

 152-270 mm (6-105⁄8 in) hole diameter

 Up to 22 680 kg (50,000 lb) rated single cylinder pulldown/hoist system

 Up to 24 000 kg (52,911 lb) bit load with one pipe in the drill string

 Patented HOBO (Hydraulically Operated Break-Out) wrench operated from the cab

 Auto cable tensioning system

 25° angle drilling package and mast locks

 Winch system 1587 kg (3,500 lb) capacity

 Single motor

 Rotation speed 0-100 rpm

 Up to 13 016 N·m (9,600 ft-lb) torque

 Integrated FOPS

 Totally enclosed, insulated, two-man cab

 Two (2) hinged doors with heavy duty freezer type door latch system

 Ten (10) windows (safety glass, tinted)

 Windshield wiper and washer kit

 Electric over hydraulic drill functions

 Auxiliary functions operated by fingertip toggle switches

 More than 3 m2 (32.4 ft2) of floor space

 Excellent visibility

 dB rating of 80 or less

 Wall mounted air conditioner/heater/pressurizer, belt driven

 Rubber shock-mounts to absorb vibration

 Electric horn activated by push button in the cab

 Gel cell maintenance free battery

 Document holder inside the cab

 Excavator type, with 12 lower rollers

 750 mm (29.5 in) triple grousers

 Full length chain guides/rock guards

 Made of heavily cross-braced rectangular steel tubing

 Rear deck is stationary during both angle and vertical drilling modes

 Viewing hatch in rear deck, hydraulically operated from cab to help spotting holes

 Four (4) hydraulic leveling jacks (152 cm/60 in)

 Dust chamber clean-out door

 Centralized lubrication system (34 points)

 Additional mast rests mounted on non-drill end

 1325 L (350 gal) fuel tank under engine: - Additional fuel tank available as option

 1570 L (415 gal) additional fuel tank under compressor

 4 × 8D batteries

 Hydraulically operated from the cab

 Maximum ambient cooling capacity of 52° C (125° F) with replaceable cores

 Two (2) variable displacement axial piston pumps, in closed loop system, that operate the drill rotation, pulldown/hoist system, and tram functions

 Double-gear pump, in open loop system, for all auxiliary functions and fan circuit

 Dual filtration

 Top sub adapter

 Table bushing

 Bit sub [note: 12 m/39 ft configuration: 342 cm (135 in) S-S, 15 m/49 ft configuration: 152 cm (60 in) S-S]

 Horseshoe bushing

 Bit basket

 Hoist plug (lifting bail)

 Auto tool wrench/deck wrench

 See Optional Equipment and select the required system

 Standard Caterpillar Colors

 Backup alarm

 Filter kit for 50-hour preventive maintenance

 Two (2) hard copy sets Operator/Service/Maintenance/Parts/Engine manuals, in English

 One Link-One Parts manual on CD, Operator and Service manual in pdf

 Seven (7) 60-watt LED lights for night drilling

 Side walkways and handrails with side boarding ladder

 Tool box, mounted under walkway (tools not included)

 Lift kit

 Towing hooks (front end)

 Battery disconnect

One Link-One Parts manual on CD, Operator and Service manual in pdf

 The MD6240 is designed to drill from 152-244 mm (6-9.625 in) diameter holes with rated pulldown and hoist capacity up to 22 680 kg (50,000 lb), in Rotary or Down the Hole applications.

 Metal turbo and exhaust manifold covers

 Engine pre-lube

 Additional filtration

 Coolant conditioner

 152-270 mm (6-105⁄8 in) hole diameter

 Up to 22 680 kg (50,000 lb) rated single cylinder pulldown/hoist system

 Up to 24 000 kg (52,911 lb) bit load with one pipe in the drill string

 Patented HOBO (Hydraulically Operated Break-Out) wrench operated from the cab

 Auto cable tensioning system

 25° angle drilling package and mast locks

 Winch system 1587 kg (3,500 lb) capacity

 Single motor

 Rotation speed 0-100 rpm

 Up to 13 016 N·m (9,600 ft-lb) torque

 Integrated FOPS

 Totally enclosed, insulated, two-man cab

 Two (2) hinged doors with heavy duty freezer type door latch system

 Ten (10) windows (safety glass, tinted)

 Windshield wiper and washer kit

 Electric over hydraulic drill functions

 Auxiliary functions operated by fingertip toggle switches

 More than 3 m2 (32.4 ft2) of floor space

 Excellent visibility

 dB rating of 80 or less

 Wall mounted air conditioner/heater/pressurizer, belt driven

 Rubber shock-mounts to absorb vibration

 Electric horn activated by push button in the cab

 Gel cell maintenance free battery

 Document holder inside the cab

 Excavator type, with 12 lower rollers

 750 mm (29.5 in) triple grousers

 Full length chain guides/rock guards

 Made of heavily cross-braced rectangular steel tubing

 Rear deck is stationary during both angle and vertical drilling modes

 Viewing hatch in rear deck, hydraulically operated from cab to help spotting holes

 Four (4) hydraulic leveling jacks (152 cm/60 in)

 Dust chamber clean-out door

 Centralized lubrication system (34 points)

 Additional mast rests mounted on non-drill end

 1325 L (350 gal) fuel tank under engine: - Additional fuel tank available as option

 1570 L (415 gal) additional fuel tank under compressor

 4 × 8D batteries

 Hydraulically operated from the cab

 Maximum ambient cooling capacity of 52° C (125° F) with replaceable cores

 Two (2) variable displacement axial piston pumps, in closed loop system, that operate the drill rotation, pulldown/hoist system, and tram functions

 Double-gear pump, in open loop system, for all auxiliary functions and fan circuit

 Dual filtration

 Top sub adapter

 Table bushing

 Bit sub [note: 12 m/39 ft configuration: 342 cm (135 in) S-S, 15 m/49 ft configuration: 152 cm (60 in) S-S]

 Horseshoe bushing

 Bit basket

 Hoist plug (lifting bail)

 Auto tool wrench/deck wrench

 See Optional Equipment and select the required system

 Standard Caterpillar Colors

 Backup alarm

 Filter kit for 50-hour preventive maintenance

 Two (2) hard copy sets Operator/Service/Maintenance/Parts/Engine manuals, in English

 One Link-One Parts manual on CD, Operator and Service manual in pdf

 Seven (7) 60-watt LED lights for night drilling

 Side walkways and handrails with side boarding ladder

 Tool box, mounted under walkway (tools not included)

 Lift kit

 Towing hooks (front end)

 Battery disconnect

Seven (7) 60-watt LED lights for night drilling

 The MD6240 is designed to drill from 152-244 mm (6-9.625 in) diameter holes with rated pulldown and hoist capacity up to 22 680 kg (50,000 lb), in Rotary or Down the Hole applications.

 Metal turbo and exhaust manifold covers

 Engine pre-lube

 Additional filtration

 Coolant conditioner

 152-270 mm (6-105⁄8 in) hole diameter

 Up to 22 680 kg (50,000 lb) rated single cylinder pulldown/hoist system

 Up to 24 000 kg (52,911 lb) bit load with one pipe in the drill string

 Patented HOBO (Hydraulically Operated Break-Out) wrench operated from the cab

 Auto cable tensioning system

 25° angle drilling package and mast locks

 Winch system 1587 kg (3,500 lb) capacity

 Single motor

 Rotation speed 0-100 rpm

 Up to 13 016 N·m (9,600 ft-lb) torque

 Integrated FOPS

 Totally enclosed, insulated, two-man cab

 Two (2) hinged doors with heavy duty freezer type door latch system

 Ten (10) windows (safety glass, tinted)

 Windshield wiper and washer kit

 Electric over hydraulic drill functions

 Auxiliary functions operated by fingertip toggle switches

 More than 3 m2 (32.4 ft2) of floor space

 Excellent visibility

 dB rating of 80 or less

 Wall mounted air conditioner/heater/pressurizer, belt driven

 Rubber shock-mounts to absorb vibration

 Electric horn activated by push button in the cab

 Gel cell maintenance free battery

 Document holder inside the cab

 Excavator type, with 12 lower rollers

 750 mm (29.5 in) triple grousers

 Full length chain guides/rock guards

 Made of heavily cross-braced rectangular steel tubing

 Rear deck is stationary during both angle and vertical drilling modes

 Viewing hatch in rear deck, hydraulically operated from cab to help spotting holes

 Four (4) hydraulic leveling jacks (152 cm/60 in)

 Dust chamber clean-out door

 Centralized lubrication system (34 points)

 Additional mast rests mounted on non-drill end

 1325 L (350 gal) fuel tank under engine: - Additional fuel tank available as option

 1570 L (415 gal) additional fuel tank under compressor

 4 × 8D batteries

 Hydraulically operated from the cab

 Maximum ambient cooling capacity of 52° C (125° F) with replaceable cores

 Two (2) variable displacement axial piston pumps, in closed loop system, that operate the drill rotation, pulldown/hoist system, and tram functions

 Double-gear pump, in open loop system, for all auxiliary functions and fan circuit

 Dual filtration

 Top sub adapter

 Table bushing

 Bit sub [note: 12 m/39 ft configuration: 342 cm (135 in) S-S, 15 m/49 ft configuration: 152 cm (60 in) S-S]

 Horseshoe bushing

 Bit basket

 Hoist plug (lifting bail)

 Auto tool wrench/deck wrench

 See Optional Equipment and select the required system

 Standard Caterpillar Colors

 Backup alarm

 Filter kit for 50-hour preventive maintenance

 Two (2) hard copy sets Operator/Service/Maintenance/Parts/Engine manuals, in English

 One Link-One Parts manual on CD, Operator and Service manual in pdf

 Seven (7) 60-watt LED lights for night drilling

 Side walkways and handrails with side boarding ladder

 Tool box, mounted under walkway (tools not included)

 Lift kit

 Towing hooks (front end)

 Battery disconnect

Side walkways and handrails with side boarding ladder

 The MD6240 is designed to drill from 152-244 mm (6-9.625 in) diameter holes with rated pulldown and hoist capacity up to 22 680 kg (50,000 lb), in Rotary or Down the Hole applications.

 Metal turbo and exhaust manifold covers

 Engine pre-lube

 Additional filtration

 Coolant conditioner

 152-270 mm (6-105⁄8 in) hole diameter

 Up to 22 680 kg (50,000 lb) rated single cylinder pulldown/hoist system

 Up to 24 000 kg (52,911 lb) bit load with one pipe in the drill string

 Patented HOBO (Hydraulically Operated Break-Out) wrench operated from the cab

 Auto cable tensioning system

 25° angle drilling package and mast locks

 Winch system 1587 kg (3,500 lb) capacity

 Single motor

 Rotation speed 0-100 rpm

 Up to 13 016 N·m (9,600 ft-lb) torque

 Integrated FOPS

 Totally enclosed, insulated, two-man cab

 Two (2) hinged doors with heavy duty freezer type door latch system

 Ten (10) windows (safety glass, tinted)

 Windshield wiper and washer kit

 Electric over hydraulic drill functions

 Auxiliary functions operated by fingertip toggle switches

 More than 3 m2 (32.4 ft2) of floor space

 Excellent visibility

 dB rating of 80 or less

 Wall mounted air conditioner/heater/pressurizer, belt driven

 Rubber shock-mounts to absorb vibration

 Electric horn activated by push button in the cab

 Gel cell maintenance free battery

 Document holder inside the cab

 Excavator type, with 12 lower rollers

 750 mm (29.5 in) triple grousers

 Full length chain guides/rock guards

 Made of heavily cross-braced rectangular steel tubing

 Rear deck is stationary during both angle and vertical drilling modes

 Viewing hatch in rear deck, hydraulically operated from cab to help spotting holes

 Four (4) hydraulic leveling jacks (152 cm/60 in)

 Dust chamber clean-out door

 Centralized lubrication system (34 points)

 Additional mast rests mounted on non-drill end

 1325 L (350 gal) fuel tank under engine: - Additional fuel tank available as option

 1570 L (415 gal) additional fuel tank under compressor

 4 × 8D batteries

 Hydraulically operated from the cab

 Maximum ambient cooling capacity of 52° C (125° F) with replaceable cores

 Two (2) variable displacement axial piston pumps, in closed loop system, that operate the drill rotation, pulldown/hoist system, and tram functions

 Double-gear pump, in open loop system, for all auxiliary functions and fan circuit

 Dual filtration

 Top sub adapter

 Table bushing

 Bit sub [note: 12 m/39 ft configuration: 342 cm (135 in) S-S, 15 m/49 ft configuration: 152 cm (60 in) S-S]

 Horseshoe bushing

 Bit basket

 Hoist plug (lifting bail)

 Auto tool wrench/deck wrench

 See Optional Equipment and select the required system

 Standard Caterpillar Colors

 Backup alarm

 Filter kit for 50-hour preventive maintenance

 Two (2) hard copy sets Operator/Service/Maintenance/Parts/Engine manuals, in English

 One Link-One Parts manual on CD, Operator and Service manual in pdf

 Seven (7) 60-watt LED lights for night drilling

 Side walkways and handrails with side boarding ladder

 Tool box, mounted under walkway (tools not included)

 Lift kit

 Towing hooks (front end)

 Battery disconnect

Tool box, mounted under walkway (tools not included)

 The MD6240 is designed to drill from 152-244 mm (6-9.625 in) diameter holes with rated pulldown and hoist capacity up to 22 680 kg (50,000 lb), in Rotary or Down the Hole applications.

 Metal turbo and exhaust manifold covers

 Engine pre-lube

 Additional filtration

 Coolant conditioner

 152-270 mm (6-105⁄8 in) hole diameter

 Up to 22 680 kg (50,000 lb) rated single cylinder pulldown/hoist system

 Up to 24 000 kg (52,911 lb) bit load with one pipe in the drill string

 Patented HOBO (Hydraulically Operated Break-Out) wrench operated from the cab

 Auto cable tensioning system

 25° angle drilling package and mast locks

 Winch system 1587 kg (3,500 lb) capacity

 Single motor

 Rotation speed 0-100 rpm

 Up to 13 016 N·m (9,600 ft-lb) torque

 Integrated FOPS

 Totally enclosed, insulated, two-man cab

 Two (2) hinged doors with heavy duty freezer type door latch system

 Ten (10) windows (safety glass, tinted)

 Windshield wiper and washer kit

 Electric over hydraulic drill functions

 Auxiliary functions operated by fingertip toggle switches

 More than 3 m2 (32.4 ft2) of floor space

 Excellent visibility

 dB rating of 80 or less

 Wall mounted air conditioner/heater/pressurizer, belt driven

 Rubber shock-mounts to absorb vibration

 Electric horn activated by push button in the cab

 Gel cell maintenance free battery

 Document holder inside the cab

 Excavator type, with 12 lower rollers

 750 mm (29.5 in) triple grousers

 Full length chain guides/rock guards

 Made of heavily cross-braced rectangular steel tubing

 Rear deck is stationary during both angle and vertical drilling modes

 Viewing hatch in rear deck, hydraulically operated from cab to help spotting holes

 Four (4) hydraulic leveling jacks (152 cm/60 in)

 Dust chamber clean-out door

 Centralized lubrication system (34 points)

 Additional mast rests mounted on non-drill end

 1325 L (350 gal) fuel tank under engine: - Additional fuel tank available as option

 1570 L (415 gal) additional fuel tank under compressor

 4 × 8D batteries

 Hydraulically operated from the cab

 Maximum ambient cooling capacity of 52° C (125° F) with replaceable cores

 Two (2) variable displacement axial piston pumps, in closed loop system, that operate the drill rotation, pulldown/hoist system, and tram functions

 Double-gear pump, in open loop system, for all auxiliary functions and fan circuit

 Dual filtration

 Top sub adapter

 Table bushing

 Bit sub [note: 12 m/39 ft configuration: 342 cm (135 in) S-S, 15 m/49 ft configuration: 152 cm (60 in) S-S]

 Horseshoe bushing

 Bit basket

 Hoist plug (lifting bail)

 Auto tool wrench/deck wrench

 See Optional Equipment and select the required system

 Standard Caterpillar Colors

 Backup alarm

 Filter kit for 50-hour preventive maintenance

 Two (2) hard copy sets Operator/Service/Maintenance/Parts/Engine manuals, in English

 One Link-One Parts manual on CD, Operator and Service manual in pdf

 Seven (7) 60-watt LED lights for night drilling

 Side walkways and handrails with side boarding ladder

 Tool box, mounted under walkway (tools not included)

 Lift kit

 Towing hooks (front end)

 Battery disconnect

Lift kit

 The MD6240 is designed to drill from 152-244 mm (6-9.625 in) diameter holes with rated pulldown and hoist capacity up to 22 680 kg (50,000 lb), in Rotary or Down the Hole applications.

 Metal turbo and exhaust manifold covers

 Engine pre-lube

 Additional filtration

 Coolant conditioner

 152-270 mm (6-105⁄8 in) hole diameter

 Up to 22 680 kg (50,000 lb) rated single cylinder pulldown/hoist system

 Up to 24 000 kg (52,911 lb) bit load with one pipe in the drill string

 Patented HOBO (Hydraulically Operated Break-Out) wrench operated from the cab

 Auto cable tensioning system

 25° angle drilling package and mast locks

 Winch system 1587 kg (3,500 lb) capacity

 Single motor

 Rotation speed 0-100 rpm

 Up to 13 016 N·m (9,600 ft-lb) torque

 Integrated FOPS

 Totally enclosed, insulated, two-man cab

 Two (2) hinged doors with heavy duty freezer type door latch system

 Ten (10) windows (safety glass, tinted)

 Windshield wiper and washer kit

 Electric over hydraulic drill functions

 Auxiliary functions operated by fingertip toggle switches

 More than 3 m2 (32.4 ft2) of floor space

 Excellent visibility

 dB rating of 80 or less

 Wall mounted air conditioner/heater/pressurizer, belt driven

 Rubber shock-mounts to absorb vibration

 Electric horn activated by push button in the cab

 Gel cell maintenance free battery

 Document holder inside the cab

 Excavator type, with 12 lower rollers

 750 mm (29.5 in) triple grousers

 Full length chain guides/rock guards

 Made of heavily cross-braced rectangular steel tubing

 Rear deck is stationary during both angle and vertical drilling modes

 Viewing hatch in rear deck, hydraulically operated from cab to help spotting holes

 Four (4) hydraulic leveling jacks (152 cm/60 in)

 Dust chamber clean-out door

 Centralized lubrication system (34 points)

 Additional mast rests mounted on non-drill end

 1325 L (350 gal) fuel tank under engine: - Additional fuel tank available as option

 1570 L (415 gal) additional fuel tank under compressor

 4 × 8D batteries

 Hydraulically operated from the cab

 Maximum ambient cooling capacity of 52° C (125° F) with replaceable cores

 Two (2) variable displacement axial piston pumps, in closed loop system, that operate the drill rotation, pulldown/hoist system, and tram functions

 Double-gear pump, in open loop system, for all auxiliary functions and fan circuit

 Dual filtration

 Top sub adapter

 Table bushing

 Bit sub [note: 12 m/39 ft configuration: 342 cm (135 in) S-S, 15 m/49 ft configuration: 152 cm (60 in) S-S]

 Horseshoe bushing

 Bit basket

 Hoist plug (lifting bail)

 Auto tool wrench/deck wrench

 See Optional Equipment and select the required system

 Standard Caterpillar Colors

 Backup alarm

 Filter kit for 50-hour preventive maintenance

 Two (2) hard copy sets Operator/Service/Maintenance/Parts/Engine manuals, in English

 One Link-One Parts manual on CD, Operator and Service manual in pdf

 Seven (7) 60-watt LED lights for night drilling

 Side walkways and handrails with side boarding ladder

 Tool box, mounted under walkway (tools not included)

 Lift kit

 Towing hooks (front end)

 Battery disconnect

Towing hooks (front end)

 The MD6240 is designed to drill from 152-244 mm (6-9.625 in) diameter holes with rated pulldown and hoist capacity up to 22 680 kg (50,000 lb), in Rotary or Down the Hole applications.

 Metal turbo and exhaust manifold covers

 Engine pre-lube

 Additional filtration

 Coolant conditioner

 152-270 mm (6-105⁄8 in) hole diameter

 Up to 22 680 kg (50,000 lb) rated single cylinder pulldown/hoist system

 Up to 24 000 kg (52,911 lb) bit load with one pipe in the drill string

 Patented HOBO (Hydraulically Operated Break-Out) wrench operated from the cab

 Auto cable tensioning system

 25° angle drilling package and mast locks

 Winch system 1587 kg (3,500 lb) capacity

 Single motor

 Rotation speed 0-100 rpm

 Up to 13 016 N·m (9,600 ft-lb) torque

 Integrated FOPS

 Totally enclosed, insulated, two-man cab

 Two (2) hinged doors with heavy duty freezer type door latch system

 Ten (10) windows (safety glass, tinted)

 Windshield wiper and washer kit

 Electric over hydraulic drill functions

 Auxiliary functions operated by fingertip toggle switches

 More than 3 m2 (32.4 ft2) of floor space

 Excellent visibility

 dB rating of 80 or less

 Wall mounted air conditioner/heater/pressurizer, belt driven

 Rubber shock-mounts to absorb vibration

 Electric horn activated by push button in the cab

 Gel cell maintenance free battery

 Document holder inside the cab

 Excavator type, with 12 lower rollers

 750 mm (29.5 in) triple grousers

 Full length chain guides/rock guards

 Made of heavily cross-braced rectangular steel tubing

 Rear deck is stationary during both angle and vertical drilling modes

 Viewing hatch in rear deck, hydraulically operated from cab to help spotting holes

 Four (4) hydraulic leveling jacks (152 cm/60 in)

 Dust chamber clean-out door

 Centralized lubrication system (34 points)

 Additional mast rests mounted on non-drill end

 1325 L (350 gal) fuel tank under engine: - Additional fuel tank available as option

 1570 L (415 gal) additional fuel tank under compressor

 4 × 8D batteries

 Hydraulically operated from the cab

 Maximum ambient cooling capacity of 52° C (125° F) with replaceable cores

 Two (2) variable displacement axial piston pumps, in closed loop system, that operate the drill rotation, pulldown/hoist system, and tram functions

 Double-gear pump, in open loop system, for all auxiliary functions and fan circuit

 Dual filtration

 Top sub adapter

 Table bushing

 Bit sub [note: 12 m/39 ft configuration: 342 cm (135 in) S-S, 15 m/49 ft configuration: 152 cm (60 in) S-S]

 Horseshoe bushing

 Bit basket

 Hoist plug (lifting bail)

 Auto tool wrench/deck wrench

 See Optional Equipment and select the required system

 Standard Caterpillar Colors

 Backup alarm

 Filter kit for 50-hour preventive maintenance

 Two (2) hard copy sets Operator/Service/Maintenance/Parts/Engine manuals, in English

 One Link-One Parts manual on CD, Operator and Service manual in pdf

 Seven (7) 60-watt LED lights for night drilling

 Side walkways and handrails with side boarding ladder

 Tool box, mounted under walkway (tools not included)

 Lift kit

 Towing hooks (front end)

 Battery disconnect

Battery disconnect

 The MD6240 is designed to drill from 152-244 mm (6-9.625 in) diameter holes with rated pulldown and hoist capacity up to 22 680 kg (50,000 lb), in Rotary or Down the Hole applications.

 Metal turbo and exhaust manifold covers

 Engine pre-lube

 Additional filtration

 Coolant conditioner

 152-270 mm (6-105⁄8 in) hole diameter

 Up to 22 680 kg (50,000 lb) rated single cylinder pulldown/hoist system

 Up to 24 000 kg (52,911 lb) bit load with one pipe in the drill string

 Patented HOBO (Hydraulically Operated Break-Out) wrench operated from the cab

 Auto cable tensioning system

 25° angle drilling package and mast locks

 Winch system 1587 kg (3,500 lb) capacity

 Single motor

 Rotation speed 0-100 rpm

 Up to 13 016 N·m (9,600 ft-lb) torque

 Integrated FOPS

 Totally enclosed, insulated, two-man cab

 Two (2) hinged doors with heavy duty freezer type door latch system

 Ten (10) windows (safety glass, tinted)

 Windshield wiper and washer kit

 Electric over hydraulic drill functions

 Auxiliary functions operated by fingertip toggle switches

 More than 3 m2 (32.4 ft2) of floor space

 Excellent visibility

 dB rating of 80 or less

 Wall mounted air conditioner/heater/pressurizer, belt driven

 Rubber shock-mounts to absorb vibration

 Electric horn activated by push button in the cab

 Gel cell maintenance free battery

 Document holder inside the cab

 Excavator type, with 12 lower rollers

 750 mm (29.5 in) triple grousers

 Full length chain guides/rock guards

 Made of heavily cross-braced rectangular steel tubing

 Rear deck is stationary during both angle and vertical drilling modes

 Viewing hatch in rear deck, hydraulically operated from cab to help spotting holes

 Four (4) hydraulic leveling jacks (152 cm/60 in)

 Dust chamber clean-out door

 Centralized lubrication system (34 points)

 Additional mast rests mounted on non-drill end

 1325 L (350 gal) fuel tank under engine: - Additional fuel tank available as option

 1570 L (415 gal) additional fuel tank under compressor

 4 × 8D batteries

 Hydraulically operated from the cab

 Maximum ambient cooling capacity of 52° C (125° F) with replaceable cores

 Two (2) variable displacement axial piston pumps, in closed loop system, that operate the drill rotation, pulldown/hoist system, and tram functions

 Double-gear pump, in open loop system, for all auxiliary functions and fan circuit

 Dual filtration

 Top sub adapter

 Table bushing

 Bit sub [note: 12 m/39 ft configuration: 342 cm (135 in) S-S, 15 m/49 ft configuration: 152 cm (60 in) S-S]

 Horseshoe bushing

 Bit basket

 Hoist plug (lifting bail)

 Auto tool wrench/deck wrench

 See Optional Equipment and select the required system

 Standard Caterpillar Colors

 Backup alarm

 Filter kit for 50-hour preventive maintenance

 Two (2) hard copy sets Operator/Service/Maintenance/Parts/Engine manuals, in English

 One Link-One Parts manual on CD, Operator and Service manual in pdf

 Seven (7) 60-watt LED lights for night drilling

 Side walkways and handrails with side boarding ladder

 Tool box, mounted under walkway (tools not included)

 Lift kit

 Towing hooks (front end)

 Battery disconnect

CAPABILITY

The MD6240 is designed to drill from 152-244 mm (6-9.625 in) diameter holes with rated pulldown and hoist capacity up to 22 680 kg (50,000 lb), in Rotary or Down the Hole applications.

ENGINE

Metal turbo and exhaust manifold covers

Engine pre-lube

Additional filtration

Coolant conditioner

MAST

152-270 mm (6-105⁄8 in) hole diameter

Up to 22 680 kg (50,000 lb) rated single cylinder pulldown/hoist system

Up to 24 000 kg (52,911 lb) bit load with one pipe in the drill string

Patented HOBO (Hydraulically Operated Break-Out) wrench operated from the cab

Auto cable tensioning system

25° angle drilling package and mast locks

Winch system 1587 kg (3,500 lb) capacity

TOP DRIVE

Single motor

Rotation speed 0-100 rpm

Up to 13 016 N·m (9,600 ft-lb) torque

Integrated FOPS

Totally enclosed, insulated, two-man cab

Two (2) hinged doors with heavy duty freezer type door latch system

Ten (10) windows (safety glass, tinted)

Windshield wiper and washer kit

Electric over hydraulic drill functions

Auxiliary functions operated by fingertip toggle switches

More than 3 m2 (32.4 ft2) of floor space

Excellent visibility

dB rating of 80 or less

Wall mounted air conditioner/heater/pressurizer, belt driven

Rubber shock-mounts to absorb vibration

Electric horn activated by push button in the cab

Gel cell maintenance free battery

Document holder inside the cab

UNDERCARRIAGE

Excavator type, with 12 lower rollers

750 mm (29.5 in) triple grousers

Full length chain guides/rock guards

MAINFRAME AND DECK

Made of heavily cross-braced rectangular steel tubing

Rear deck is stationary during both angle and vertical drilling modes

Viewing hatch in rear deck, hydraulically operated from cab to help spotting holes

Four (4) hydraulic leveling jacks (152 cm/60 in)

Dust chamber clean-out door

Centralized lubrication system (34 points)

Additional mast rests mounted on non-drill end

1325 L (350 gal) fuel tank under engine: - Additional fuel tank available as option

1570 L (415 gal) additional fuel tank under compressor

4 × 8D batteries

CAROUSEL

Hydraulically operated from the cab

COOLING - SPLIT COOLER ARRANGEMENT

Maximum ambient cooling capacity of 52° C (125° F) with replaceable cores

HYDRAULIC SYSTEM

Two (2) variable displacement axial piston pumps, in closed loop system, that operate the drill rotation, pulldown/hoist system, and tram functions

Double-gear pump, in open loop system, for all auxiliary functions and fan circuit

Dual filtration

DRILLING ACCESSORIES (TRICONE/ROTARY)

Top sub adapter

Table bushing

Bit sub [note: 12 m/39 ft configuration: 342 cm (135 in) S-S, 15 m/49 ft configuration: 152 cm (60 in) S-S]

Horseshoe bushing

Bit basket

Hoist plug (lifting bail)

Auto tool wrench/deck wrench

DUST SYSTEM

See Optional Equipment and select the required system

PAINT

Standard Caterpillar Colors

OTHER

Backup alarm

Filter kit for 50-hour preventive maintenance

Two (2) hard copy sets Operator/Service/Maintenance/Parts/Engine manuals, in English

One Link-One Parts manual on CD, Operator and Service manual in pdf

Seven (7) 60-watt LED lights for night drilling

Side walkways and handrails with side boarding ladder

Tool box, mounted under walkway (tools not included)

Lift kit

Towing hooks (front end)

Battery disconnect

DRILLING ACCESSORIES KIT FOR HAMMER DRILLING (IN LIEU OF ROTARY DRILL ACCESSORIES)

 Shock sub and adaptor, bit sub, two-piece table bushing, horseshoe bushing, hoist plug, bit basket, hammer oil injection system with 113.5 L (30 gal) tank

DUST COLLECTION

 Dust Collector 4500 Series

 Water injection system for dust suppression with three (3) tanks totaling 1271 L (336 gal) mounted under the front deck

 Water injection system for dust suppression with total 1514 L (400 gal) tank mounted on top-deck (mounted in place of Dry Dust Collector)

 Note: Dry Dust Collector and water injection on the same drill can be selected only with below deck tanks.

DRILLING

 Drill pipe

 Roller deck bushing

 Two-piece (split) deck bushing

 Rotary head RPM gauge, digital

 Rotary torque control

 Rotary/hammer shock sub

 Rock oiler injection system (for Tricone); 113.56 L (30 gal)

 Pipe guide roller assembly mounted on drill deck (rear deck)

 Dual purpose carousel (hammer - Tricone pipe rack)

Drill pipe

Roller deck bushing

Two-piece (split) deck bushing

Rotary head RPM gauge, digital

Rotary torque control

Rotary/hammer shock sub

Rock oiler injection system (for Tricone); 113.56 L (30 gal)

Pipe guide roller assembly mounted on drill deck (rear deck)

Dual purpose carousel (hammer - Tricone pipe rack)

FLUIDS

 Wiggins fuel only

 Wiggins full service (fuel, hydraulic oil, coolant, engine oil)

 Automatic lubrication system (34 points)

 Drilling pipe thread lube system, activated from inside the cab

SYSTEM PROTECTION

 Additional loop filters between pumps and motors

 Hydraulic diagnostic test station

 Engine mounted stop

 Ground level engine shutdown

 Rotating beacons (one on mast crown, one on cab, one on front-end)

Additional loop filters between pumps and motors

Hydraulic diagnostic test station

Engine mounted stop

Ground level engine shutdown

Rotating beacons (one on mast crown, one on cab, one on front-end)

COLD WEATHER AIDS

 WEBASTO system (self-contained heater for engine coolant, water, hydraulic oil, fuel)

 Cab floor heater (electric fan with heater core utilizing engine coolant)

 Heating and circulation/drainage system for water injection installation, for -40° C (-40° F) with gate valve activated by temperature sensor

 Cold weather package for temperatures down to -40° C (-40° F): - Two-speed fan arrangement for coolers - Electric heating elements for heating of fuel and water tanks, coolant, hydraulic oil tank - Insulation of bottom of the cab and fuel tanks - C

INDICATOR SYSTEMS

 Mast lock indicator

 Jack retract indicators

 Tram interlock, jacks (with indicator)

 Tram interlock, head-position (pipe-in-hole)

 Pipe rack interlock

 Filter indicators, centrally mounted in cab (hydraulic, compressor, air intake)

MISCELLANEOUS

 24 to 12 volt converter

 Extra lighting package (5 additional 60 watt LED lights)

 Blowdown hose with nozzle

 Hydraulic rear dust curtain lifting system

 Hydraulic front dust curtain lifting system

 CE conformity kit

 Special paint

 Closed circuit camera system with two cameras for front and rear mounting and monitor in cab

 Radio AM/FM, CD player and USB port for I-pod

 Radio C.B. with antenna

 XIR cab glass upgrade

 Thermal double-pane glass upgrade

 Cab window shades

 Remote jump start terminals

 Electric horn activated by push button in the cab

 Gel-cell maintenance free battery upgrade

 Main drill window cage

 Lanyard attachment - cable with traveling hook on mast, and personnel harness

 Tram remote control (pendant/cable) for operation of tram controls from ground

 Winch remote control pendant (control outside cab)

 24V to 110V or 220V AC invertor

 Mechanical tool kit (reference TV014590)

 Three-point harness kit for operator’s seat

 Water injection flow meter

 Cab manometer

 Extreme hot weather lubricant upgrade (compressor oil)

 Extreme hot weather lubricant upgrade (hydraulic oil)

 Basic engine shut down timer

 Murphy EMS panel mounted in cab-dash

 EMS lap top harness/terminal mounted inside cab

 Mirror kit (includes three bolt-on mirrors)

 Slope indicator mounted in cab to indicate forward and lateral angle

 Hydraulic oil temperature gauge mounted in dash

 Document holder mounted inside the cab

24 to 12 volt converter

Extra lighting package (5 additional 60 watt LED lights)

Blowdown hose with nozzle

Hydraulic rear dust curtain lifting system

Hydraulic front dust curtain lifting system

CE conformity kit

Special paint

Closed circuit camera system with two cameras for front and rear mounting and monitor in cab

Radio AM/FM, CD player and USB port for I-pod

Radio C.B. with antenna

XIR cab glass upgrade

Thermal double-pane glass upgrade

Cab window shades

Remote jump start terminals

Electric horn activated by push button in the cab

Gel-cell maintenance free battery upgrade

Main drill window cage

Lanyard attachment - cable with traveling hook on mast, and personnel harness

Tram remote control (pendant/cable) for operation of tram controls from ground

Winch remote control pendant (control outside cab)

24V to 110V or 220V AC invertor

Mechanical tool kit (reference TV014590)

Three-point harness kit for operator’s seat

Water injection flow meter

Cab manometer

Extreme hot weather lubricant upgrade (compressor oil)

Extreme hot weather lubricant upgrade (hydraulic oil)

Basic engine shut down timer

Murphy EMS panel mounted in cab-dash

EMS lap top harness/terminal mounted inside cab

Mirror kit (includes three bolt-on mirrors)

Slope indicator mounted in cab to indicate forward and lateral angle

Hydraulic oil temperature gauge mounted in dash

Document holder mounted inside the cab

DRILLING ACCESSORIES KIT FOR HAMMER DRILLING (IN LIEU OF ROTARY DRILL ACCESSORIES)

Shock sub and adaptor, bit sub, two-piece table bushing, horseshoe bushing, hoist plug, bit basket, hammer oil injection system with 113.5 L (30 gal) tank

DUST COLLECTION

Dust Collector 4500 Series

Water injection system for dust suppression with three (3) tanks totaling 1271 L (336 gal) mounted under the front deck

Water injection system for dust suppression with total 1514 L (400 gal) tank mounted on top-deck (mounted in place of Dry Dust Collector)

Note: Dry Dust Collector and water injection on the same drill can be selected only with below deck tanks.

DRILLING

Drill pipe

Roller deck bushing

Two-piece (split) deck bushing

Rotary head RPM gauge, digital

Rotary torque control

Rotary/hammer shock sub

Rock oiler injection system (for Tricone); 113.56 L (30 gal)

Pipe guide roller assembly mounted on drill deck (rear deck)

Dual purpose carousel (hammer - Tricone pipe rack)

FLUIDS

Wiggins fuel only

Wiggins full service (fuel, hydraulic oil, coolant, engine oil)

Automatic lubrication system (34 points)

Drilling pipe thread lube system, activated from inside the cab

SYSTEM PROTECTION

Additional loop filters between pumps and motors

Hydraulic diagnostic test station

Engine mounted stop

Ground level engine shutdown

Rotating beacons (one on mast crown, one on cab, one on front-end)

COLD WEATHER AIDS

WEBASTO system (self-contained heater for engine coolant, water, hydraulic oil, fuel)

Cab floor heater (electric fan with heater core utilizing engine coolant)

Heating and circulation/drainage system for water injection installation, for -40° C (-40° F) with gate valve activated by temperature sensor

Cold weather package for temperatures down to -40° C (-40° F): - Two-speed fan arrangement for coolers - Electric heating elements for heating of fuel and water tanks, coolant, hydraulic oil tank - Insulation of bottom of the cab and fuel tanks - C

INDICATOR SYSTEMS

Mast lock indicator

Jack retract indicators

Tram interlock, jacks (with indicator)

Tram interlock, head-position (pipe-in-hole)

Pipe rack interlock

Filter indicators, centrally mounted in cab (hydraulic, compressor, air intake)

MISCELLANEOUS

24 to 12 volt converter

Extra lighting package (5 additional 60 watt LED lights)

Blowdown hose with nozzle

Hydraulic rear dust curtain lifting system

Hydraulic front dust curtain lifting system

CE conformity kit

Special paint

Closed circuit camera system with two cameras for front and rear mounting and monitor in cab

Radio AM/FM, CD player and USB port for I-pod

Radio C.B. with antenna

XIR cab glass upgrade

Thermal double-pane glass upgrade

Cab window shades

Remote jump start terminals

Electric horn activated by push button in the cab

Gel-cell maintenance free battery upgrade

Main drill window cage

Lanyard attachment - cable with traveling hook on mast, and personnel harness

Tram remote control (pendant/cable) for operation of tram controls from ground

Winch remote control pendant (control outside cab)

24V to 110V or 220V AC invertor

Mechanical tool kit (reference TV014590)

Water injection flow meter

Cab manometer

Extreme hot weather lubricant upgrade (compressor oil)

Extreme hot weather lubricant upgrade (hydraulic oil)

Basic engine shut down timer

Murphy EMS panel mounted in cab-dash

EMS lap top harness/terminal mounted inside cab

Mirror kit (includes three bolt-on mirrors)

Slope indicator mounted in cab to indicate forward and lateral angle

Hydraulic oil temperature gauge mounted in dash

Document holder mounted inside the cab