The Cat Track-Type Tractor waste handling arrangement machines are purpose built for landfill operations. Special guarding and cooling systems are standard on these machines to help them withstand the harsh operating conditions in the landfill.
|Number of Cylinders
|SU-Blade Capacity with Trash Rack
|U-Blade Capacity with Trash Rack
|LGP SU-Blade Capacity with Trash Rack
|Length of Track on Ground
|Ground Contact Area
|Width Over Trunnions
|Width without Trunnions (Standard Shoe)
|Height (Stripped Top)
|Overall Length Basic Tractor
|Overall Length with Blade
Service Refill Capacities
Waste Handling GuardsExtensive guarding helps protect critical machine components, body panels and the radiator from being damaged by debris under harsh waste handling environments. Minimizing build-up helps prevent component damage.
Hinged Radiator GuardThe hinged radiator guard protects the cooling system. It comes equipped with two quick release "T" handles for the center-opening guard, allowing easy access to the radiator for cleaning. Covers protect the handles from damage. Special hinge latches retain the guard in the open or closed positions.
Tilt Cylinder Lines GuardsThe tilt cylinder lines guards help protect hydraulic lines from contact damage, while maintaining hose flexibility.
Crankcase (belly) GuardsThe crankcase (belly) guards serve a dual purpose. They help prevent contact damage to vital power train components, and help keep debris out of the power train compartments. The D8R Series II features an attachment guard that can be electrically raised and lowered.
Chassis GuardsThe chassis guards help protect the engine compartment by deflecting debris from rising upward along the chassis.
Pivot Shaft Seal GuardsThe pivot shaft seal guards help prevent debris from entering and damaging the Duo-Cone® seals as well as protecting the bolts on the pivot shaft seal retainers.
Idler Seal GuardsThe idler seal guards help keep wire, fishing line, strapping, etc., from wrapping around and damaging the Duo-Cone seals.
Final Drive Seal GuardsThe final drive seal guards help prevent wire, nylon strapping, etc., from wrapping around and damaging the Duo-Cone seals. The outer guard is now stationary, thicker, and has increased hardness, all of which help prevent excessive wear from debris.
Seal Guard DesignThis design offers superior protection to the seal. Debris would have to make four 90° turns, penetrate the packing material, and then make two additional 90° turns.
Debris Resistant FeaturesAdditional landfill modifications enhance productivity and help prevent damage.
Rear, Tank-mounted LightsThe rear, tank-mounted lights are relocated on the ROPS, which removes the lights from the concentrated debris environment to help protect them from damage. Combinations vary depending on each model.
Front LightsThe front lights are mounted on top of the bulldozer lift cylinders allowing them to project light over the trash rack and keep the lights above the concentrated debris environment for longer service life.
Heavy-duty Steps and HandlesThe heavy-duty steps and handles are manufactured from plate steel and solid rod to withstand the rigors of landfill operation.
High-capacity AlternatorThe high-capacity 100-amp alternator provides additional power required for electrical accessories such as supplemental lights and communications and entertainment radios. The debris shield helps prevent debris from entering into the alternator.
Raised PrescreenerRaised prescreener helps reduce the likelihood of airborne paper or plastics plugging the air intake. It provides a larger air inlet. Part of standard waste handling modification when turbine precleaner is not ordered.
Required AttachmentsThese options must be ordered in addition to the basic Waste Handling Arrangement.
Engine EnclosuresThe engine enclosures consist of perforated hood and side panels. The enclosures help prevent airborne materials from entering the engine compartment and help reduce radiator plugging, which can cause cooling system problems. Note: If the sound suppression arrangement is ordered, the perforated side panels are replaced with solid doors and the perforated hood is replaced with larger rectangular perforations.
Hydraulic and Fuel Tank guardThe hydraulic and fuel guard helps protect implement hydraulic oil tank, battery box and fuel tank. • Plates are included to cover the light openings after they are repositioned on top of cylinders and ROPS.
Rear Striker BarsThe rear striker bars incorporate a rigid drawbar and housing with large access doors for storage on machines not equipped with rippers. The rear striker bars are counterweight-ready in case additional rear weight is needed. For machines with rippers, striker bars mount on ripper frame.
Supplemental Cylinder Mounted LightsThe supplemental cylinder mounted lights (four front) are repositioned from the fender/ openings to the top of the cylinders. The fender openings are covered with plates to prevent debris from entering.
ROPS-mounted Air Conditioner Condenser and FansThe ROPS-mounted air conditioner and fans are relocated from the engine compartment to the ROPS. • Moving the condenser and fans away from the radiator reduces the concentration of debris and plugging. This relocation also increases the cooling capacity of the machine for operation in higher temperatures. Note: The ROPS-mounted position raises the height of the D8R Series II an additional 30.5 cm (12 in).
Laminated Thermal ShieldsThe laminated thermal shields cover the exhaust stack inside the compartment, hot-side of the turbocharger, and the exhaust manifold. These shields reduce surface temperatures well below the flash point of most common combustibles encountered.
Caterpillar Turbine Air PrecleanerThe Caterpillar turbine air precleaner removes large particulates from the incoming air before they reach the air filter and extends filter life two to four times. The turbine inside creates a vortex with the incoming air to eject particulates. This unit converts the standard, single-stage air cleaner to a two-stage system. This option includes a screen. Consult your Caterpillar dealer for additional information.
Required AttachmentsThese options must be ordered in addition to the basic Waste Handling Arrangement.
Clamshell GuardsThe clamshell guard provides a non-rotating guard installed over the final drives to help prevent wire wrap. The guard includes inspection plates.
Radiator (AMOCS)The AMOCS radiator utilizes an exclusive two pass cooling system and increased cooling surface area to provide significantly more cooling capacity than conventional systems. A trash core radiator is available with six fins per inch, replacing the standard nine fins per inch.
Flexxaire™ Fan Engine Control SystemThe Flexxaire fan engine control system automatically reverses fan pitch at preset intervals to purge debris from the radiator and engine compartment. The operator also can manually purge the fan at any time. The Flexxaire fan is controlled by the engine ECM (Electrical Control Module).
Ejector FanThe ejector fan blade is designed with curved edges to help throw debris out radially. This helps prevent debris from clogging the radiator.
Recommended OptionsFeatures for peak performance. Several additional options are recommended to assist in matching your site requirements.
Caterpillar Landfill BladesThe Caterpillar landfill blades increase the dozing capacity in trash and help prevent material from spilling over the blade and entering the radiator. Wear plates are available and are recommended when working in highly abrasive materials.
Front Striker BarsThe front striker bars angled design prevents debris from riding up the track and damaging the fenders or fuel and hydraulic tanks.
Trapezoidal Hole Track ShoesThe trapezoidal hole track shoes reduce refuse packing within the track and reduces track chain tightening and accelerated pin and bushing wear. The trapezoidal holes relieve packing by allowing the sprocket to punch out dirt and debris.
Black Painted Hood, Cylinders, and Back of BladeThe black painted hood, cylinders, and back of blade reduces glare from lights while operating at night and while operating in direct sunlight.
Hydraulic RippersHydraulic rippers are available as single or multi-shank to penetrate tough material fast and rip thoroughly.
ServiceabilityCat elevated sprocket tractors use a new generation modular design that simplifies service and repair. Easy manitenance and fast in-field component exchange gives you more time on the job.
Built-in Servicing EaseLess service time computes to more production time. Major components are made as modules and most can be removed without disturbing or removing others.
Grouped Service PointsGrouped service points and easy access to servicing areas make routine inspections fast and convenient.
Quick Disconnect FittingsThe quick disconnect fittings allow for fast diagnosis of the power train and implement oil systems.
Ecology DrainsThe ecology drains provide an environmentally safer method to drain fluids. They are included on the radiator, hydraulic tank and major power train components.
Diagnostic ConnectorA diagnostic connector allows the Cat Dealer's electronic test instrument to quickly troubleshoot the electrical system or access stored data with the use of Electronic Technician (Cat ET) or ECAP.
Pre-testing Modular ComponentsPre-testing modular components before installation or after repair assures quality.
Complete Customer SupportUnmatched in the industry!
ServicesYour Cat dealer offers a wide range of services that can be set up under a Customer Support Agreement (CSA) when you purchase your equipment. The dealer will help you choose a plan that can cover everything from machine and attachment selection to replacement, to help you get the best return on your investment.
Product SupportYou will find nearly all parts at our dealer parts counter. Cat dealers utilize a world-wide computer network to find in-stock parts to minimize machine down time. Save money with remanufactured parts. You receive the same warranty and reliability as new products at a cost savings of 40 to 70 percent.
Service CapabilityWhether in the dealer's fully equipped shop or in the field, you will get trained services technicians using the latest technology and tools.
SelectionMake detailed comparisons of the machines you are considering before you buy. How long do components last? What is the cost of preventative maintenance? What is the true cost of lost production? Your Cat dealer can give you precise answers to these questions.
OperationImproving operating techniques can boost your profits. Your Cat Dealer has training videotapes, literature and other ideas to help you increase productivity.
ReplacementRepair, rebuild or replace? Your Cat Dealer can help evaluate the cost involved so you can make the right choice.
Customer Service AgreementsDealer service response extends to programs such as Custom Track Service (CTS), Scheduled Oil Sampling (S·O·SSM), and guaranteed maintenance contracts that get peak life and performance from your machine.