Engine Model | Cat 3126B DITAAC |
Flywheel Power | 90.3 kW |
Maximum Flywheel Power | 90.3 kW |
Net Power – Caterpillar | 90.3 kW |
Net Power – ISO 9249 | 90.3 kW |
Net Power – SAE J1349 | 89.4 kW |
Net Power – EU 80/1269 | 90.3 kW |
Bore | 110.0 mm |
Stroke | 127.0 mm |
Displacement | 7.2 L |
Operating Weight | 12737.8 kg |
Shipping Weight | 12459.0 kg |
Operating Weight Power Shift FTC - XL | 12738.0 kg |
Shipping Weight FTC - XL | 12541.0 kg |
Operating Weight Power Shift FTC - LGP | 13530.0 kg |
Shipping Weight FTC - LGP | 12975.0 kg |
Blade Type | V PAT |
XL, VPAT – Blade Capacity | 2.6 m3 |
XL VPAT – Blade Width | 3077.0 mm |
LGP, VPAT – Blade Capacity | 2.6 m3 |
LGP VPAT – Blade Width | 3360.0 mm |
1.5 Forward | 3.2 km/h |
2.0 Forward | 4.6 km/h |
2.5 Forward | 5.7 km/h |
3.0 Forward | 7.9 km/h |
3.5 Forward | 9.9 km/h |
1.5 Reverse | 3.7 km/h |
2.0 Reverse | 5.3 km/h |
2.5 Reverse | 6.8 km/h |
3.0 Reverse | 9.1 km/h |
3.5 Reverse | 11.8 km/h |
Drawbar Pull – 1.5 Forward | 222.94 kN |
Drawbar Pull – 2.0 Forward | 122.0 kN |
Drawbar Pull – 2.5 Forward | 122.0 kN |
Drawbar Pull – 3.0 Forward | 66.96 kN |
Drawbar Pull – 3.5 Forward | 66.56 kN |
Width of Shoe – XL | 560.0 mm |
Width of Shoe – LGP | 760.0 mm |
Shoes/Side – XL | 41 |
Shoes/Side – LGP | 44 |
Grouser Height | 47.0 mm |
Ground Clearance | 378.0 mm |
Track Gauge – XL | 1770.0 mm |
Track Gauge – LGP | 2000.0 mm |
Track on Ground – XL | 2388.0 mm |
Track on Ground – LGP | 2604.0 mm |
Ground Contact Area – XL | 2.67 m2 |
Ground Contact Area – LGP | 3.96 m2 |
Ground Pressure | 47.4 kPa |
Ground Pressure – XL | 47.0 kg/cm2 |
Ground Pressure – LGP | 32.8 kPa |
Track Rollers/Side – XL | 7 |
Track Rollers/Side – LGP | 8 |
Fuel Tank | 257.0 L |
Cooling System | 37.0 L |
Final Drives (each) | 6.0 L |
Hydraulic Tank | 29.5 L |
Winch Model | PA 55 |
Weight* | 1180.0 kg |
Oil Capacity | 74.1 L |
Winch and Bracket Length | 1120.0 mm |
Winch Case – Width | 975.0 mm |
Drum Diameter | 254.0 mm |
Drum Width | 315.0 mm |
Flange Diameter | 504.0 mm |
Ferrule Size (O.D. × Length) | 54 x 65 mm 2.13 x 2.56 in |
Ground Clearance | 378.0 mm |
Track Gauge | 1770.0 mm |
Width without Blade | 2330.0 mm |
Width with Blade | 2797.0 mm |
Height ROPS/Canopy | 2992.0 mm |
Overall Length Basic Tractor (with Drawbar) | 3.544 mm |
Overall Length with Blade | 4.555 m |
Length with VPAT-blade (straight) | 4555.0 mm |
Type | Fixed Radial |
Number of Pockets | 3 |
Overall Beam Width | 1951.0 mm |
Beam Cross Section | 165 x 211 mm 6.5 x 8.3 in. |
Maximum Penetration – XL | 350.0 mm |
Maximum Penetration – LGP | 298.0 mm |
Weight – Each Additional Shank | 34.0 kg |
10-amp/12-volt converter
70-amp alternator
Back-up alarm
Diagnostic connector
Horn
Hour meter
Integrated front lights
Odometer
10-amp/12-volt converter
70-amp alternator
Back-up alarm
Diagnostic connector
Horn
Hour meter
Integrated front lights
Odometer
Coat hook
Cup holder (LH)
Electric armrest
Electronic Monitoring System (EMS III)
Electronic travel speed and gear limiter
Engine air cleaner service indicator in the cab
Engine RPM display/gear display
Foot pegs for slope work
Four gauge cluster
FTC control for Clutch and Brake steering
Power points, two 12-volt
Pre-start coolant level monitoring system
Product Link ready
Radio ready, 12-volt
Rear view mirror
ROPS/FOPS cab with integrated A/C
Seat belt, retractable 76 mm (3 in)
Storage and literature compartment
Transmission shift points selection function on dash
3126 HEUI Caterpillar diesel engine with 24-volt starter
Air-to-air aftercooler
Auto-dust ejector with under hood air filter and pre-screener
Automatic down-shift and kickdown transmission control
Coolant, extended life
Coolant sampling port
Controlled throttle shifting
Decelerating function
Fan, blower
Fuel/water separator
Load compensated shifting
Modular radiator (IMRM)
Selectable shift points
Single poly-vee belt with auto belt tensioner
Steering system: Clutch and Brake with FTC
Three-speed planetary transmission with torque converter
Adjuster, hydraulic track
Carrier rollers
Guards, end track-guiding
Heavy-duty sealed and lubricated tracks
Lifetime lubricated track rollers and idlers
Wider tread and taller flange idler profile
4600 meter altitude operation capability without derating
Centralized remote mounted pressure taps for easy access
Crankcase guard
Ecology drains
Extended service intervals (500 hours)
Front pull device
Hinged engine doors
Hinged radiator grill
Implement oil filter
Keyed lockable enclosures
Load sensing hydraulics
Rigid drawbar
SOSSM taps for engine, transmission and implement fluids
Three valve hydraulics for VPAT dozer
Transmission remote pressure taps
10-amp/12-volt converter
70-amp alternator
Back-up alarm
Diagnostic connector
Horn
Hour meter
Integrated front lights
Odometer
Coat hook
Cup holder (LH)
Electric armrest
Electronic Monitoring System (EMS III)
Electronic travel speed and gear limiter
Engine air cleaner service indicator in the cab
Engine RPM display/gear display
Foot pegs for slope work
Four gauge cluster
FTC control for Clutch and Brake steering
Power points, two 12-volt
Pre-start coolant level monitoring system
Product Link ready
Radio ready, 12-volt
Rear view mirror
ROPS/FOPS cab with integrated A/C
Seat belt, retractable 76 mm (3 in)
Storage and literature compartment
Transmission shift points selection function on dash
3126 HEUI Caterpillar diesel engine with 24-volt starter
Air-to-air aftercooler
Auto-dust ejector with under hood air filter and pre-screener
Automatic down-shift and kickdown transmission control
Coolant, extended life
Coolant sampling port
Controlled throttle shifting
Decelerating function
Fan, blower
Fuel/water separator
Load compensated shifting
Modular radiator (IMRM)
Selectable shift points
Single poly-vee belt with auto belt tensioner
Steering system: Clutch and Brake with FTC
Three-speed planetary transmission with torque converter
Adjuster, hydraulic track
Carrier rollers
Guards, end track-guiding
Heavy-duty sealed and lubricated tracks
Lifetime lubricated track rollers and idlers
Wider tread and taller flange idler profile
4600 meter altitude operation capability without derating
Centralized remote mounted pressure taps for easy access
Crankcase guard
Ecology drains
Extended service intervals (500 hours)
Front pull device
Hinged engine doors
Hinged radiator grill
Implement oil filter
Keyed lockable enclosures
Load sensing hydraulics
Rigid drawbar
SOSSM taps for engine, transmission and implement fluids
Three valve hydraulics for VPAT dozer
Transmission remote pressure taps
10-amp/12-volt converter
70-amp alternator
Back-up alarm
Diagnostic connector
Horn
Hour meter
Integrated front lights
Odometer
Coat hook
Cup holder (LH)
Electric armrest
Electronic Monitoring System (EMS III)
Electronic travel speed and gear limiter
Engine air cleaner service indicator in the cab
Engine RPM display/gear display
Foot pegs for slope work
Four gauge cluster
FTC control for Clutch and Brake steering
Power points, two 12-volt
Pre-start coolant level monitoring system
Product Link ready
Radio ready, 12-volt
Rear view mirror
ROPS/FOPS cab with integrated A/C
Seat belt, retractable 76 mm (3 in)
Storage and literature compartment
Transmission shift points selection function on dash
3126 HEUI Caterpillar diesel engine with 24-volt starter
Air-to-air aftercooler
Auto-dust ejector with under hood air filter and pre-screener
Automatic down-shift and kickdown transmission control
Coolant, extended life
Coolant sampling port
Controlled throttle shifting
Decelerating function
Fan, blower
Fuel/water separator
Load compensated shifting
Modular radiator (IMRM)
Selectable shift points
Single poly-vee belt with auto belt tensioner
Steering system: Clutch and Brake with FTC
Three-speed planetary transmission with torque converter
Adjuster, hydraulic track
Carrier rollers
Guards, end track-guiding
Heavy-duty sealed and lubricated tracks
Lifetime lubricated track rollers and idlers
Wider tread and taller flange idler profile
4600 meter altitude operation capability without derating
Centralized remote mounted pressure taps for easy access
Crankcase guard
Ecology drains
Extended service intervals (500 hours)
Front pull device
Hinged engine doors
Hinged radiator grill
Implement oil filter
Keyed lockable enclosures
Load sensing hydraulics
Rigid drawbar
SOSSM taps for engine, transmission and implement fluids
Three valve hydraulics for VPAT dozer
Transmission remote pressure taps
10-amp/12-volt converter
70-amp alternator
Back-up alarm
Diagnostic connector
Horn
Hour meter
Integrated front lights
Odometer
Coat hook
Cup holder (LH)
Electric armrest
Electronic Monitoring System (EMS III)
Electronic travel speed and gear limiter
Engine air cleaner service indicator in the cab
Engine RPM display/gear display
Foot pegs for slope work
Four gauge cluster
FTC control for Clutch and Brake steering
Power points, two 12-volt
Pre-start coolant level monitoring system
Product Link ready
Radio ready, 12-volt
Rear view mirror
ROPS/FOPS cab with integrated A/C
Seat belt, retractable 76 mm (3 in)
Storage and literature compartment
Transmission shift points selection function on dash
3126 HEUI Caterpillar diesel engine with 24-volt starter
Air-to-air aftercooler
Auto-dust ejector with under hood air filter and pre-screener
Automatic down-shift and kickdown transmission control
Coolant, extended life
Coolant sampling port
Controlled throttle shifting
Decelerating function
Fan, blower
Fuel/water separator
Load compensated shifting
Modular radiator (IMRM)
Selectable shift points
Single poly-vee belt with auto belt tensioner
Steering system: Clutch and Brake with FTC
Three-speed planetary transmission with torque converter
Adjuster, hydraulic track
Carrier rollers
Guards, end track-guiding
Heavy-duty sealed and lubricated tracks
Lifetime lubricated track rollers and idlers
Wider tread and taller flange idler profile
4600 meter altitude operation capability without derating
Centralized remote mounted pressure taps for easy access
Crankcase guard
Ecology drains
Extended service intervals (500 hours)
Front pull device
Hinged engine doors
Hinged radiator grill
Implement oil filter
Keyed lockable enclosures
Load sensing hydraulics
Rigid drawbar
SOSSM taps for engine, transmission and implement fluids
Three valve hydraulics for VPAT dozer
Transmission remote pressure taps
10-amp/12-volt converter
70-amp alternator
Back-up alarm
Diagnostic connector
Horn
Hour meter
Integrated front lights
Odometer
Coat hook
Cup holder (LH)
Electric armrest
Electronic Monitoring System (EMS III)
Electronic travel speed and gear limiter
Engine air cleaner service indicator in the cab
Engine RPM display/gear display
Foot pegs for slope work
Four gauge cluster
FTC control for Clutch and Brake steering
Power points, two 12-volt
Pre-start coolant level monitoring system
Product Link ready
Radio ready, 12-volt
Rear view mirror
ROPS/FOPS cab with integrated A/C
Seat belt, retractable 76 mm (3 in)
Storage and literature compartment
Transmission shift points selection function on dash
3126 HEUI Caterpillar diesel engine with 24-volt starter
Air-to-air aftercooler
Auto-dust ejector with under hood air filter and pre-screener
Automatic down-shift and kickdown transmission control
Coolant, extended life
Coolant sampling port
Controlled throttle shifting
Decelerating function
Fan, blower
Fuel/water separator
Load compensated shifting
Modular radiator (IMRM)
Selectable shift points
Single poly-vee belt with auto belt tensioner
Steering system: Clutch and Brake with FTC
Three-speed planetary transmission with torque converter
Adjuster, hydraulic track
Carrier rollers
Guards, end track-guiding
Heavy-duty sealed and lubricated tracks
Lifetime lubricated track rollers and idlers
Wider tread and taller flange idler profile
4600 meter altitude operation capability without derating
Centralized remote mounted pressure taps for easy access
Crankcase guard
Ecology drains
Extended service intervals (500 hours)
Front pull device
Hinged engine doors
Hinged radiator grill
Implement oil filter
Keyed lockable enclosures
Load sensing hydraulics
Rigid drawbar
SOSSM taps for engine, transmission and implement fluids
Three valve hydraulics for VPAT dozer
Transmission remote pressure taps
10-amp/12-volt converter
70-amp alternator
Back-up alarm
Diagnostic connector
Horn
Hour meter
Integrated front lights
Odometer
Coat hook
Cup holder (LH)
Electric armrest
Electronic Monitoring System (EMS III)
Electronic travel speed and gear limiter
Engine air cleaner service indicator in the cab
Engine RPM display/gear display
Foot pegs for slope work
Four gauge cluster
FTC control for Clutch and Brake steering
Power points, two 12-volt
Pre-start coolant level monitoring system
Product Link ready
Radio ready, 12-volt
Rear view mirror
ROPS/FOPS cab with integrated A/C
Seat belt, retractable 76 mm (3 in)
Storage and literature compartment
Transmission shift points selection function on dash
3126 HEUI Caterpillar diesel engine with 24-volt starter
Air-to-air aftercooler
Auto-dust ejector with under hood air filter and pre-screener
Automatic down-shift and kickdown transmission control
Coolant, extended life
Coolant sampling port
Controlled throttle shifting
Decelerating function
Fan, blower
Fuel/water separator
Load compensated shifting
Modular radiator (IMRM)
Selectable shift points
Single poly-vee belt with auto belt tensioner
Steering system: Clutch and Brake with FTC
Three-speed planetary transmission with torque converter
Adjuster, hydraulic track
Carrier rollers
Guards, end track-guiding
Heavy-duty sealed and lubricated tracks
Lifetime lubricated track rollers and idlers
Wider tread and taller flange idler profile
4600 meter altitude operation capability without derating
Centralized remote mounted pressure taps for easy access
Crankcase guard
Ecology drains
Extended service intervals (500 hours)
Front pull device
Hinged engine doors
Hinged radiator grill
Implement oil filter
Keyed lockable enclosures
Load sensing hydraulics
Rigid drawbar
SOSSM taps for engine, transmission and implement fluids
Three valve hydraulics for VPAT dozer
Transmission remote pressure taps
10-amp/12-volt converter
70-amp alternator
Back-up alarm
Diagnostic connector
Horn
Hour meter
Integrated front lights
Odometer
Coat hook
Cup holder (LH)
Electric armrest
Electronic Monitoring System (EMS III)
Electronic travel speed and gear limiter
Engine air cleaner service indicator in the cab
Engine RPM display/gear display
Foot pegs for slope work
Four gauge cluster
FTC control for Clutch and Brake steering
Power points, two 12-volt
Pre-start coolant level monitoring system
Product Link ready
Radio ready, 12-volt
Rear view mirror
ROPS/FOPS cab with integrated A/C
Seat belt, retractable 76 mm (3 in)
Storage and literature compartment
Transmission shift points selection function on dash
3126 HEUI Caterpillar diesel engine with 24-volt starter
Air-to-air aftercooler
Auto-dust ejector with under hood air filter and pre-screener
Automatic down-shift and kickdown transmission control
Coolant, extended life
Coolant sampling port
Controlled throttle shifting
Decelerating function
Fan, blower
Fuel/water separator
Load compensated shifting
Modular radiator (IMRM)
Selectable shift points
Single poly-vee belt with auto belt tensioner
Steering system: Clutch and Brake with FTC
Three-speed planetary transmission with torque converter
Adjuster, hydraulic track
Carrier rollers
Guards, end track-guiding
Heavy-duty sealed and lubricated tracks
Lifetime lubricated track rollers and idlers
Wider tread and taller flange idler profile
4600 meter altitude operation capability without derating
Centralized remote mounted pressure taps for easy access
Crankcase guard
Ecology drains
Extended service intervals (500 hours)
Front pull device
Hinged engine doors
Hinged radiator grill
Implement oil filter
Keyed lockable enclosures
Load sensing hydraulics
Rigid drawbar
SOSSM taps for engine, transmission and implement fluids
Three valve hydraulics for VPAT dozer
Transmission remote pressure taps
10-amp/12-volt converter
70-amp alternator
Back-up alarm
Diagnostic connector
Horn
Hour meter
Integrated front lights
Odometer
Coat hook
Cup holder (LH)
Electric armrest
Electronic Monitoring System (EMS III)
Electronic travel speed and gear limiter
Engine air cleaner service indicator in the cab
Engine RPM display/gear display
Foot pegs for slope work
Four gauge cluster
FTC control for Clutch and Brake steering
Power points, two 12-volt
Pre-start coolant level monitoring system
Product Link ready
Radio ready, 12-volt
Rear view mirror
ROPS/FOPS cab with integrated A/C
Seat belt, retractable 76 mm (3 in)
Storage and literature compartment
Transmission shift points selection function on dash
3126 HEUI Caterpillar diesel engine with 24-volt starter
Air-to-air aftercooler
Auto-dust ejector with under hood air filter and pre-screener
Automatic down-shift and kickdown transmission control
Coolant, extended life
Coolant sampling port
Controlled throttle shifting
Decelerating function
Fan, blower
Fuel/water separator
Load compensated shifting
Modular radiator (IMRM)
Selectable shift points
Single poly-vee belt with auto belt tensioner
Steering system: Clutch and Brake with FTC
Three-speed planetary transmission with torque converter
Adjuster, hydraulic track
Carrier rollers
Guards, end track-guiding
Heavy-duty sealed and lubricated tracks
Lifetime lubricated track rollers and idlers
Wider tread and taller flange idler profile
4600 meter altitude operation capability without derating
Centralized remote mounted pressure taps for easy access
Crankcase guard
Ecology drains
Extended service intervals (500 hours)
Front pull device
Hinged engine doors
Hinged radiator grill
Implement oil filter
Keyed lockable enclosures
Load sensing hydraulics
Rigid drawbar
SOSSM taps for engine, transmission and implement fluids
Three valve hydraulics for VPAT dozer
Transmission remote pressure taps
Coat hook
Cup holder (LH)
Electric armrest
Electronic Monitoring System (EMS III)
Electronic travel speed and gear limiter
Engine air cleaner service indicator in the cab
Engine RPM display/gear display
Foot pegs for slope work
Four gauge cluster
FTC control for Clutch and Brake steering
Power points, two 12-volt
Pre-start coolant level monitoring system
Product Link ready
Radio ready, 12-volt
Rear view mirror
ROPS/FOPS cab with integrated A/C
Seat belt, retractable 76 mm (3 in)
Storage and literature compartment
Transmission shift points selection function on dash
10-amp/12-volt converter
70-amp alternator
Back-up alarm
Diagnostic connector
Horn
Hour meter
Integrated front lights
Odometer
Coat hook
Cup holder (LH)
Electric armrest
Electronic Monitoring System (EMS III)
Electronic travel speed and gear limiter
Engine air cleaner service indicator in the cab
Engine RPM display/gear display
Foot pegs for slope work
Four gauge cluster
FTC control for Clutch and Brake steering
Power points, two 12-volt
Pre-start coolant level monitoring system
Product Link ready
Radio ready, 12-volt
Rear view mirror
ROPS/FOPS cab with integrated A/C
Seat belt, retractable 76 mm (3 in)
Storage and literature compartment
Transmission shift points selection function on dash
3126 HEUI Caterpillar diesel engine with 24-volt starter
Air-to-air aftercooler
Auto-dust ejector with under hood air filter and pre-screener
Automatic down-shift and kickdown transmission control
Coolant, extended life
Coolant sampling port
Controlled throttle shifting
Decelerating function
Fan, blower
Fuel/water separator
Load compensated shifting
Modular radiator (IMRM)
Selectable shift points
Single poly-vee belt with auto belt tensioner
Steering system: Clutch and Brake with FTC
Three-speed planetary transmission with torque converter
Adjuster, hydraulic track
Carrier rollers
Guards, end track-guiding
Heavy-duty sealed and lubricated tracks
Lifetime lubricated track rollers and idlers
Wider tread and taller flange idler profile
4600 meter altitude operation capability without derating
Centralized remote mounted pressure taps for easy access
Crankcase guard
Ecology drains
Extended service intervals (500 hours)
Front pull device
Hinged engine doors
Hinged radiator grill
Implement oil filter
Keyed lockable enclosures
Load sensing hydraulics
Rigid drawbar
SOSSM taps for engine, transmission and implement fluids
Three valve hydraulics for VPAT dozer
Transmission remote pressure taps
10-amp/12-volt converter
70-amp alternator
Back-up alarm
Diagnostic connector
Horn
Hour meter
Integrated front lights
Odometer
Coat hook
Cup holder (LH)
Electric armrest
Electronic Monitoring System (EMS III)
Electronic travel speed and gear limiter
Engine air cleaner service indicator in the cab
Engine RPM display/gear display
Foot pegs for slope work
Four gauge cluster
FTC control for Clutch and Brake steering
Power points, two 12-volt
Pre-start coolant level monitoring system
Product Link ready
Radio ready, 12-volt
Rear view mirror
ROPS/FOPS cab with integrated A/C
Seat belt, retractable 76 mm (3 in)
Storage and literature compartment
Transmission shift points selection function on dash
3126 HEUI Caterpillar diesel engine with 24-volt starter
Air-to-air aftercooler
Auto-dust ejector with under hood air filter and pre-screener
Automatic down-shift and kickdown transmission control
Coolant, extended life
Coolant sampling port
Controlled throttle shifting
Decelerating function
Fan, blower
Fuel/water separator
Load compensated shifting
Modular radiator (IMRM)
Selectable shift points
Single poly-vee belt with auto belt tensioner
Steering system: Clutch and Brake with FTC
Three-speed planetary transmission with torque converter
Adjuster, hydraulic track
Carrier rollers
Guards, end track-guiding
Heavy-duty sealed and lubricated tracks
Lifetime lubricated track rollers and idlers
Wider tread and taller flange idler profile
4600 meter altitude operation capability without derating
Centralized remote mounted pressure taps for easy access
Crankcase guard
Ecology drains
Extended service intervals (500 hours)
Front pull device
Hinged engine doors
Hinged radiator grill
Implement oil filter
Keyed lockable enclosures
Load sensing hydraulics
Rigid drawbar
SOSSM taps for engine, transmission and implement fluids
Three valve hydraulics for VPAT dozer
Transmission remote pressure taps
10-amp/12-volt converter
70-amp alternator
Back-up alarm
Diagnostic connector
Horn
Hour meter
Integrated front lights
Odometer
Coat hook
Cup holder (LH)
Electric armrest
Electronic Monitoring System (EMS III)
Electronic travel speed and gear limiter
Engine air cleaner service indicator in the cab
Engine RPM display/gear display
Foot pegs for slope work
Four gauge cluster
FTC control for Clutch and Brake steering
Power points, two 12-volt
Pre-start coolant level monitoring system
Product Link ready
Radio ready, 12-volt
Rear view mirror
ROPS/FOPS cab with integrated A/C
Seat belt, retractable 76 mm (3 in)
Storage and literature compartment
Transmission shift points selection function on dash
3126 HEUI Caterpillar diesel engine with 24-volt starter
Air-to-air aftercooler
Auto-dust ejector with under hood air filter and pre-screener
Automatic down-shift and kickdown transmission control
Coolant, extended life
Coolant sampling port
Controlled throttle shifting
Decelerating function
Fan, blower
Fuel/water separator
Load compensated shifting
Modular radiator (IMRM)
Selectable shift points
Single poly-vee belt with auto belt tensioner
Steering system: Clutch and Brake with FTC
Three-speed planetary transmission with torque converter
Adjuster, hydraulic track
Carrier rollers
Guards, end track-guiding
Heavy-duty sealed and lubricated tracks
Lifetime lubricated track rollers and idlers
Wider tread and taller flange idler profile
4600 meter altitude operation capability without derating
Centralized remote mounted pressure taps for easy access
Crankcase guard
Ecology drains
Extended service intervals (500 hours)
Front pull device
Hinged engine doors
Hinged radiator grill
Implement oil filter
Keyed lockable enclosures
Load sensing hydraulics
Rigid drawbar
SOSSM taps for engine, transmission and implement fluids
Three valve hydraulics for VPAT dozer
Transmission remote pressure taps
10-amp/12-volt converter
70-amp alternator
Back-up alarm
Diagnostic connector
Horn
Hour meter
Integrated front lights
Odometer
Coat hook
Cup holder (LH)
Electric armrest
Electronic Monitoring System (EMS III)
Electronic travel speed and gear limiter
Engine air cleaner service indicator in the cab
Engine RPM display/gear display
Foot pegs for slope work
Four gauge cluster
FTC control for Clutch and Brake steering
Power points, two 12-volt
Pre-start coolant level monitoring system
Product Link ready
Radio ready, 12-volt
Rear view mirror
ROPS/FOPS cab with integrated A/C
Seat belt, retractable 76 mm (3 in)
Storage and literature compartment
Transmission shift points selection function on dash
3126 HEUI Caterpillar diesel engine with 24-volt starter
Air-to-air aftercooler
Auto-dust ejector with under hood air filter and pre-screener
Automatic down-shift and kickdown transmission control
Coolant, extended life
Coolant sampling port
Controlled throttle shifting
Decelerating function
Fan, blower
Fuel/water separator
Load compensated shifting
Modular radiator (IMRM)
Selectable shift points
Single poly-vee belt with auto belt tensioner
Steering system: Clutch and Brake with FTC
Three-speed planetary transmission with torque converter
Adjuster, hydraulic track
Carrier rollers
Guards, end track-guiding
Heavy-duty sealed and lubricated tracks
Lifetime lubricated track rollers and idlers
Wider tread and taller flange idler profile
4600 meter altitude operation capability without derating
Centralized remote mounted pressure taps for easy access
Crankcase guard
Ecology drains
Extended service intervals (500 hours)
Front pull device
Hinged engine doors
Hinged radiator grill
Implement oil filter
Keyed lockable enclosures
Load sensing hydraulics
Rigid drawbar
SOSSM taps for engine, transmission and implement fluids
Three valve hydraulics for VPAT dozer
Transmission remote pressure taps
10-amp/12-volt converter
70-amp alternator
Back-up alarm
Diagnostic connector
Horn
Hour meter
Integrated front lights
Odometer
Coat hook
Cup holder (LH)
Electric armrest
Electronic Monitoring System (EMS III)
Electronic travel speed and gear limiter
Engine air cleaner service indicator in the cab
Engine RPM display/gear display
Foot pegs for slope work
Four gauge cluster
FTC control for Clutch and Brake steering
Power points, two 12-volt
Pre-start coolant level monitoring system
Product Link ready
Radio ready, 12-volt
Rear view mirror
ROPS/FOPS cab with integrated A/C
Seat belt, retractable 76 mm (3 in)
Storage and literature compartment
Transmission shift points selection function on dash
3126 HEUI Caterpillar diesel engine with 24-volt starter
Air-to-air aftercooler
Auto-dust ejector with under hood air filter and pre-screener
Automatic down-shift and kickdown transmission control
Coolant, extended life
Coolant sampling port
Controlled throttle shifting
Decelerating function
Fan, blower
Fuel/water separator
Load compensated shifting
Modular radiator (IMRM)
Selectable shift points
Single poly-vee belt with auto belt tensioner
Steering system: Clutch and Brake with FTC
Three-speed planetary transmission with torque converter
Adjuster, hydraulic track
Carrier rollers
Guards, end track-guiding
Heavy-duty sealed and lubricated tracks
Lifetime lubricated track rollers and idlers
Wider tread and taller flange idler profile
4600 meter altitude operation capability without derating
Centralized remote mounted pressure taps for easy access
Crankcase guard
Ecology drains
Extended service intervals (500 hours)
Front pull device
Hinged engine doors
Hinged radiator grill
Implement oil filter
Keyed lockable enclosures
Load sensing hydraulics
Rigid drawbar
SOSSM taps for engine, transmission and implement fluids
Three valve hydraulics for VPAT dozer
Transmission remote pressure taps
10-amp/12-volt converter
70-amp alternator
Back-up alarm
Diagnostic connector
Horn
Hour meter
Integrated front lights
Odometer
Coat hook
Cup holder (LH)
Electric armrest
Electronic Monitoring System (EMS III)
Electronic travel speed and gear limiter
Engine air cleaner service indicator in the cab
Engine RPM display/gear display
Foot pegs for slope work
Four gauge cluster
FTC control for Clutch and Brake steering
Power points, two 12-volt
Pre-start coolant level monitoring system
Product Link ready
Radio ready, 12-volt
Rear view mirror
ROPS/FOPS cab with integrated A/C
Seat belt, retractable 76 mm (3 in)
Storage and literature compartment
Transmission shift points selection function on dash
3126 HEUI Caterpillar diesel engine with 24-volt starter
Air-to-air aftercooler
Auto-dust ejector with under hood air filter and pre-screener
Automatic down-shift and kickdown transmission control
Coolant, extended life
Coolant sampling port
Controlled throttle shifting
Decelerating function
Fan, blower
Fuel/water separator
Load compensated shifting
Modular radiator (IMRM)
Selectable shift points
Single poly-vee belt with auto belt tensioner
Steering system: Clutch and Brake with FTC
Three-speed planetary transmission with torque converter
Adjuster, hydraulic track
Carrier rollers
Guards, end track-guiding
Heavy-duty sealed and lubricated tracks
Lifetime lubricated track rollers and idlers
Wider tread and taller flange idler profile
4600 meter altitude operation capability without derating
Centralized remote mounted pressure taps for easy access
Crankcase guard
Ecology drains
Extended service intervals (500 hours)
Front pull device
Hinged engine doors
Hinged radiator grill
Implement oil filter
Keyed lockable enclosures
Load sensing hydraulics
Rigid drawbar
SOSSM taps for engine, transmission and implement fluids
Three valve hydraulics for VPAT dozer
Transmission remote pressure taps
10-amp/12-volt converter
70-amp alternator
Back-up alarm
Diagnostic connector
Horn
Hour meter
Integrated front lights
Odometer
Coat hook
Cup holder (LH)
Electric armrest
Electronic Monitoring System (EMS III)
Electronic travel speed and gear limiter
Engine air cleaner service indicator in the cab
Engine RPM display/gear display
Foot pegs for slope work
Four gauge cluster
FTC control for Clutch and Brake steering
Power points, two 12-volt
Pre-start coolant level monitoring system
Product Link ready
Radio ready, 12-volt
Rear view mirror
ROPS/FOPS cab with integrated A/C
Seat belt, retractable 76 mm (3 in)
Storage and literature compartment
Transmission shift points selection function on dash
3126 HEUI Caterpillar diesel engine with 24-volt starter
Air-to-air aftercooler
Auto-dust ejector with under hood air filter and pre-screener
Automatic down-shift and kickdown transmission control
Coolant, extended life
Coolant sampling port
Controlled throttle shifting
Decelerating function
Fan, blower
Fuel/water separator
Load compensated shifting
Modular radiator (IMRM)
Selectable shift points
Single poly-vee belt with auto belt tensioner
Steering system: Clutch and Brake with FTC
Three-speed planetary transmission with torque converter
Adjuster, hydraulic track
Carrier rollers
Guards, end track-guiding
Heavy-duty sealed and lubricated tracks
Lifetime lubricated track rollers and idlers
Wider tread and taller flange idler profile
4600 meter altitude operation capability without derating
Centralized remote mounted pressure taps for easy access
Crankcase guard
Ecology drains
Extended service intervals (500 hours)
Front pull device
Hinged engine doors
Hinged radiator grill
Implement oil filter
Keyed lockable enclosures
Load sensing hydraulics
Rigid drawbar
SOSSM taps for engine, transmission and implement fluids
Three valve hydraulics for VPAT dozer
Transmission remote pressure taps
10-amp/12-volt converter
70-amp alternator
Back-up alarm
Diagnostic connector
Horn
Hour meter
Integrated front lights
Odometer
Coat hook
Cup holder (LH)
Electric armrest
Electronic Monitoring System (EMS III)
Electronic travel speed and gear limiter
Engine air cleaner service indicator in the cab
Engine RPM display/gear display
Foot pegs for slope work
Four gauge cluster
FTC control for Clutch and Brake steering
Power points, two 12-volt
Pre-start coolant level monitoring system
Product Link ready
Radio ready, 12-volt
Rear view mirror
ROPS/FOPS cab with integrated A/C
Seat belt, retractable 76 mm (3 in)
Storage and literature compartment
Transmission shift points selection function on dash
3126 HEUI Caterpillar diesel engine with 24-volt starter
Air-to-air aftercooler
Auto-dust ejector with under hood air filter and pre-screener
Automatic down-shift and kickdown transmission control
Coolant, extended life
Coolant sampling port
Controlled throttle shifting
Decelerating function
Fan, blower
Fuel/water separator
Load compensated shifting
Modular radiator (IMRM)
Selectable shift points
Single poly-vee belt with auto belt tensioner
Steering system: Clutch and Brake with FTC
Three-speed planetary transmission with torque converter
Adjuster, hydraulic track
Carrier rollers
Guards, end track-guiding
Heavy-duty sealed and lubricated tracks
Lifetime lubricated track rollers and idlers
Wider tread and taller flange idler profile
4600 meter altitude operation capability without derating
Centralized remote mounted pressure taps for easy access
Crankcase guard
Ecology drains
Extended service intervals (500 hours)
Front pull device
Hinged engine doors
Hinged radiator grill
Implement oil filter
Keyed lockable enclosures
Load sensing hydraulics
Rigid drawbar
SOSSM taps for engine, transmission and implement fluids
Three valve hydraulics for VPAT dozer
Transmission remote pressure taps
10-amp/12-volt converter
70-amp alternator
Back-up alarm
Diagnostic connector
Horn
Hour meter
Integrated front lights
Odometer
Coat hook
Cup holder (LH)
Electric armrest
Electronic Monitoring System (EMS III)
Electronic travel speed and gear limiter
Engine air cleaner service indicator in the cab
Engine RPM display/gear display
Foot pegs for slope work
Four gauge cluster
FTC control for Clutch and Brake steering
Power points, two 12-volt
Pre-start coolant level monitoring system
Product Link ready
Radio ready, 12-volt
Rear view mirror
ROPS/FOPS cab with integrated A/C
Seat belt, retractable 76 mm (3 in)
Storage and literature compartment
Transmission shift points selection function on dash
3126 HEUI Caterpillar diesel engine with 24-volt starter
Air-to-air aftercooler
Auto-dust ejector with under hood air filter and pre-screener
Automatic down-shift and kickdown transmission control
Coolant, extended life
Coolant sampling port
Controlled throttle shifting
Decelerating function
Fan, blower
Fuel/water separator
Load compensated shifting
Modular radiator (IMRM)
Selectable shift points
Single poly-vee belt with auto belt tensioner
Steering system: Clutch and Brake with FTC
Three-speed planetary transmission with torque converter
Adjuster, hydraulic track
Carrier rollers
Guards, end track-guiding
Heavy-duty sealed and lubricated tracks
Lifetime lubricated track rollers and idlers
Wider tread and taller flange idler profile
4600 meter altitude operation capability without derating
Centralized remote mounted pressure taps for easy access
Crankcase guard
Ecology drains
Extended service intervals (500 hours)
Front pull device
Hinged engine doors
Hinged radiator grill
Implement oil filter
Keyed lockable enclosures
Load sensing hydraulics
Rigid drawbar
SOSSM taps for engine, transmission and implement fluids
Three valve hydraulics for VPAT dozer
Transmission remote pressure taps
10-amp/12-volt converter
70-amp alternator
Back-up alarm
Diagnostic connector
Horn
Hour meter
Integrated front lights
Odometer
Coat hook
Cup holder (LH)
Electric armrest
Electronic Monitoring System (EMS III)
Electronic travel speed and gear limiter
Engine air cleaner service indicator in the cab
Engine RPM display/gear display
Foot pegs for slope work
Four gauge cluster
FTC control for Clutch and Brake steering
Power points, two 12-volt
Pre-start coolant level monitoring system
Product Link ready
Radio ready, 12-volt
Rear view mirror
ROPS/FOPS cab with integrated A/C
Seat belt, retractable 76 mm (3 in)
Storage and literature compartment
Transmission shift points selection function on dash
3126 HEUI Caterpillar diesel engine with 24-volt starter
Air-to-air aftercooler
Auto-dust ejector with under hood air filter and pre-screener
Automatic down-shift and kickdown transmission control
Coolant, extended life
Coolant sampling port
Controlled throttle shifting
Decelerating function
Fan, blower
Fuel/water separator
Load compensated shifting
Modular radiator (IMRM)
Selectable shift points
Single poly-vee belt with auto belt tensioner
Steering system: Clutch and Brake with FTC
Three-speed planetary transmission with torque converter
Adjuster, hydraulic track
Carrier rollers
Guards, end track-guiding
Heavy-duty sealed and lubricated tracks
Lifetime lubricated track rollers and idlers
Wider tread and taller flange idler profile
4600 meter altitude operation capability without derating
Centralized remote mounted pressure taps for easy access
Crankcase guard
Ecology drains
Extended service intervals (500 hours)
Front pull device
Hinged engine doors
Hinged radiator grill
Implement oil filter
Keyed lockable enclosures
Load sensing hydraulics
Rigid drawbar
SOSSM taps for engine, transmission and implement fluids
Three valve hydraulics for VPAT dozer
Transmission remote pressure taps
10-amp/12-volt converter
70-amp alternator
Back-up alarm
Diagnostic connector
Horn
Hour meter
Integrated front lights
Odometer
Coat hook
Cup holder (LH)
Electric armrest
Electronic Monitoring System (EMS III)
Electronic travel speed and gear limiter
Engine air cleaner service indicator in the cab
Engine RPM display/gear display
Foot pegs for slope work
Four gauge cluster
FTC control for Clutch and Brake steering
Power points, two 12-volt
Pre-start coolant level monitoring system
Product Link ready
Radio ready, 12-volt
Rear view mirror
ROPS/FOPS cab with integrated A/C
Seat belt, retractable 76 mm (3 in)
Storage and literature compartment
Transmission shift points selection function on dash
3126 HEUI Caterpillar diesel engine with 24-volt starter
Air-to-air aftercooler
Auto-dust ejector with under hood air filter and pre-screener
Automatic down-shift and kickdown transmission control
Coolant, extended life
Coolant sampling port
Controlled throttle shifting
Decelerating function
Fan, blower
Fuel/water separator
Load compensated shifting
Modular radiator (IMRM)
Selectable shift points
Single poly-vee belt with auto belt tensioner
Steering system: Clutch and Brake with FTC
Three-speed planetary transmission with torque converter
Adjuster, hydraulic track
Carrier rollers
Guards, end track-guiding
Heavy-duty sealed and lubricated tracks
Lifetime lubricated track rollers and idlers
Wider tread and taller flange idler profile
4600 meter altitude operation capability without derating
Centralized remote mounted pressure taps for easy access
Crankcase guard
Ecology drains
Extended service intervals (500 hours)
Front pull device
Hinged engine doors
Hinged radiator grill
Implement oil filter
Keyed lockable enclosures
Load sensing hydraulics
Rigid drawbar
SOSSM taps for engine, transmission and implement fluids
Three valve hydraulics for VPAT dozer
Transmission remote pressure taps
10-amp/12-volt converter
70-amp alternator
Back-up alarm
Diagnostic connector
Horn
Hour meter
Integrated front lights
Odometer
Coat hook
Cup holder (LH)
Electric armrest
Electronic Monitoring System (EMS III)
Electronic travel speed and gear limiter
Engine air cleaner service indicator in the cab
Engine RPM display/gear display
Foot pegs for slope work
Four gauge cluster
FTC control for Clutch and Brake steering
Power points, two 12-volt
Pre-start coolant level monitoring system
Product Link ready
Radio ready, 12-volt
Rear view mirror
ROPS/FOPS cab with integrated A/C
Seat belt, retractable 76 mm (3 in)
Storage and literature compartment
Transmission shift points selection function on dash
3126 HEUI Caterpillar diesel engine with 24-volt starter
Air-to-air aftercooler
Auto-dust ejector with under hood air filter and pre-screener
Automatic down-shift and kickdown transmission control
Coolant, extended life
Coolant sampling port
Controlled throttle shifting
Decelerating function
Fan, blower
Fuel/water separator
Load compensated shifting
Modular radiator (IMRM)
Selectable shift points
Single poly-vee belt with auto belt tensioner
Steering system: Clutch and Brake with FTC
Three-speed planetary transmission with torque converter
Adjuster, hydraulic track
Carrier rollers
Guards, end track-guiding
Heavy-duty sealed and lubricated tracks
Lifetime lubricated track rollers and idlers
Wider tread and taller flange idler profile
4600 meter altitude operation capability without derating
Centralized remote mounted pressure taps for easy access
Crankcase guard
Ecology drains
Extended service intervals (500 hours)
Front pull device
Hinged engine doors
Hinged radiator grill
Implement oil filter
Keyed lockable enclosures
Load sensing hydraulics
Rigid drawbar
SOSSM taps for engine, transmission and implement fluids
Three valve hydraulics for VPAT dozer
Transmission remote pressure taps
10-amp/12-volt converter
70-amp alternator
Back-up alarm
Diagnostic connector
Horn
Hour meter
Integrated front lights
Odometer
Coat hook
Cup holder (LH)
Electric armrest
Electronic Monitoring System (EMS III)
Electronic travel speed and gear limiter
Engine air cleaner service indicator in the cab
Engine RPM display/gear display
Foot pegs for slope work
Four gauge cluster
FTC control for Clutch and Brake steering
Power points, two 12-volt
Pre-start coolant level monitoring system
Product Link ready
Radio ready, 12-volt
Rear view mirror
ROPS/FOPS cab with integrated A/C
Seat belt, retractable 76 mm (3 in)
Storage and literature compartment
Transmission shift points selection function on dash
3126 HEUI Caterpillar diesel engine with 24-volt starter
Air-to-air aftercooler
Auto-dust ejector with under hood air filter and pre-screener
Automatic down-shift and kickdown transmission control
Coolant, extended life
Coolant sampling port
Controlled throttle shifting
Decelerating function
Fan, blower
Fuel/water separator
Load compensated shifting
Modular radiator (IMRM)
Selectable shift points
Single poly-vee belt with auto belt tensioner
Steering system: Clutch and Brake with FTC
Three-speed planetary transmission with torque converter
Adjuster, hydraulic track
Carrier rollers
Guards, end track-guiding
Heavy-duty sealed and lubricated tracks
Lifetime lubricated track rollers and idlers
Wider tread and taller flange idler profile
4600 meter altitude operation capability without derating
Centralized remote mounted pressure taps for easy access
Crankcase guard
Ecology drains
Extended service intervals (500 hours)
Front pull device
Hinged engine doors
Hinged radiator grill
Implement oil filter
Keyed lockable enclosures
Load sensing hydraulics
Rigid drawbar
SOSSM taps for engine, transmission and implement fluids
Three valve hydraulics for VPAT dozer
Transmission remote pressure taps
10-amp/12-volt converter
70-amp alternator
Back-up alarm
Diagnostic connector
Horn
Hour meter
Integrated front lights
Odometer
Coat hook
Cup holder (LH)
Electric armrest
Electronic Monitoring System (EMS III)
Electronic travel speed and gear limiter
Engine air cleaner service indicator in the cab
Engine RPM display/gear display
Foot pegs for slope work
Four gauge cluster
FTC control for Clutch and Brake steering
Power points, two 12-volt
Pre-start coolant level monitoring system
Product Link ready
Radio ready, 12-volt
Rear view mirror
ROPS/FOPS cab with integrated A/C
Seat belt, retractable 76 mm (3 in)
Storage and literature compartment
Transmission shift points selection function on dash
3126 HEUI Caterpillar diesel engine with 24-volt starter
Air-to-air aftercooler
Auto-dust ejector with under hood air filter and pre-screener
Automatic down-shift and kickdown transmission control
Coolant, extended life
Coolant sampling port
Controlled throttle shifting
Decelerating function
Fan, blower
Fuel/water separator
Load compensated shifting
Modular radiator (IMRM)
Selectable shift points
Single poly-vee belt with auto belt tensioner
Steering system: Clutch and Brake with FTC
Three-speed planetary transmission with torque converter
Adjuster, hydraulic track
Carrier rollers
Guards, end track-guiding
Heavy-duty sealed and lubricated tracks
Lifetime lubricated track rollers and idlers
Wider tread and taller flange idler profile
4600 meter altitude operation capability without derating
Centralized remote mounted pressure taps for easy access
Crankcase guard
Ecology drains
Extended service intervals (500 hours)
Front pull device
Hinged engine doors
Hinged radiator grill
Implement oil filter
Keyed lockable enclosures
Load sensing hydraulics
Rigid drawbar
SOSSM taps for engine, transmission and implement fluids
Three valve hydraulics for VPAT dozer
Transmission remote pressure taps
10-amp/12-volt converter
70-amp alternator
Back-up alarm
Diagnostic connector
Horn
Hour meter
Integrated front lights
Odometer
Coat hook
Cup holder (LH)
Electric armrest
Electronic Monitoring System (EMS III)
Electronic travel speed and gear limiter
Engine air cleaner service indicator in the cab
Engine RPM display/gear display
Foot pegs for slope work
Four gauge cluster
FTC control for Clutch and Brake steering
Power points, two 12-volt
Pre-start coolant level monitoring system
Product Link ready
Radio ready, 12-volt
Rear view mirror
ROPS/FOPS cab with integrated A/C
Seat belt, retractable 76 mm (3 in)
Storage and literature compartment
Transmission shift points selection function on dash
3126 HEUI Caterpillar diesel engine with 24-volt starter
Air-to-air aftercooler
Auto-dust ejector with under hood air filter and pre-screener
Automatic down-shift and kickdown transmission control
Coolant, extended life
Coolant sampling port
Controlled throttle shifting
Decelerating function
Fan, blower
Fuel/water separator
Load compensated shifting
Modular radiator (IMRM)
Selectable shift points
Single poly-vee belt with auto belt tensioner
Steering system: Clutch and Brake with FTC
Three-speed planetary transmission with torque converter
Adjuster, hydraulic track
Carrier rollers
Guards, end track-guiding
Heavy-duty sealed and lubricated tracks
Lifetime lubricated track rollers and idlers
Wider tread and taller flange idler profile
4600 meter altitude operation capability without derating
Centralized remote mounted pressure taps for easy access
Crankcase guard
Ecology drains
Extended service intervals (500 hours)
Front pull device
Hinged engine doors
Hinged radiator grill
Implement oil filter
Keyed lockable enclosures
Load sensing hydraulics
Rigid drawbar
SOSSM taps for engine, transmission and implement fluids
Three valve hydraulics for VPAT dozer
Transmission remote pressure taps
10-amp/12-volt converter
70-amp alternator
Back-up alarm
Diagnostic connector
Horn
Hour meter
Integrated front lights
Odometer
Coat hook
Cup holder (LH)
Electric armrest
Electronic Monitoring System (EMS III)
Electronic travel speed and gear limiter
Engine air cleaner service indicator in the cab
Engine RPM display/gear display
Foot pegs for slope work
Four gauge cluster
FTC control for Clutch and Brake steering
Power points, two 12-volt
Pre-start coolant level monitoring system
Product Link ready
Radio ready, 12-volt
Rear view mirror
ROPS/FOPS cab with integrated A/C
Seat belt, retractable 76 mm (3 in)
Storage and literature compartment
Transmission shift points selection function on dash
3126 HEUI Caterpillar diesel engine with 24-volt starter
Air-to-air aftercooler
Auto-dust ejector with under hood air filter and pre-screener
Automatic down-shift and kickdown transmission control
Coolant, extended life
Coolant sampling port
Controlled throttle shifting
Decelerating function
Fan, blower
Fuel/water separator
Load compensated shifting
Modular radiator (IMRM)
Selectable shift points
Single poly-vee belt with auto belt tensioner
Steering system: Clutch and Brake with FTC
Three-speed planetary transmission with torque converter
Adjuster, hydraulic track
Carrier rollers
Guards, end track-guiding
Heavy-duty sealed and lubricated tracks
Lifetime lubricated track rollers and idlers
Wider tread and taller flange idler profile
4600 meter altitude operation capability without derating
Centralized remote mounted pressure taps for easy access
Crankcase guard
Ecology drains
Extended service intervals (500 hours)
Front pull device
Hinged engine doors
Hinged radiator grill
Implement oil filter
Keyed lockable enclosures
Load sensing hydraulics
Rigid drawbar
SOSSM taps for engine, transmission and implement fluids
Three valve hydraulics for VPAT dozer
Transmission remote pressure taps
10-amp/12-volt converter
70-amp alternator
Back-up alarm
Diagnostic connector
Horn
Hour meter
Integrated front lights
Odometer
Coat hook
Cup holder (LH)
Electric armrest
Electronic Monitoring System (EMS III)
Electronic travel speed and gear limiter
Engine air cleaner service indicator in the cab
Engine RPM display/gear display
Foot pegs for slope work
Four gauge cluster
FTC control for Clutch and Brake steering
Power points, two 12-volt
Pre-start coolant level monitoring system
Product Link ready
Radio ready, 12-volt
Rear view mirror
ROPS/FOPS cab with integrated A/C
Seat belt, retractable 76 mm (3 in)
Storage and literature compartment
Transmission shift points selection function on dash
3126 HEUI Caterpillar diesel engine with 24-volt starter
Air-to-air aftercooler
Auto-dust ejector with under hood air filter and pre-screener
Automatic down-shift and kickdown transmission control
Coolant, extended life
Coolant sampling port
Controlled throttle shifting
Decelerating function
Fan, blower
Fuel/water separator
Load compensated shifting
Modular radiator (IMRM)
Selectable shift points
Single poly-vee belt with auto belt tensioner
Steering system: Clutch and Brake with FTC
Three-speed planetary transmission with torque converter
Adjuster, hydraulic track
Carrier rollers
Guards, end track-guiding
Heavy-duty sealed and lubricated tracks
Lifetime lubricated track rollers and idlers
Wider tread and taller flange idler profile
4600 meter altitude operation capability without derating
Centralized remote mounted pressure taps for easy access
Crankcase guard
Ecology drains
Extended service intervals (500 hours)
Front pull device
Hinged engine doors
Hinged radiator grill
Implement oil filter
Keyed lockable enclosures
Load sensing hydraulics
Rigid drawbar
SOSSM taps for engine, transmission and implement fluids
Three valve hydraulics for VPAT dozer
Transmission remote pressure taps
10-amp/12-volt converter
70-amp alternator
Back-up alarm
Diagnostic connector
Horn
Hour meter
Integrated front lights
Odometer
Coat hook
Cup holder (LH)
Electric armrest
Electronic Monitoring System (EMS III)
Electronic travel speed and gear limiter
Engine air cleaner service indicator in the cab
Engine RPM display/gear display
Foot pegs for slope work
Four gauge cluster
FTC control for Clutch and Brake steering
Power points, two 12-volt
Pre-start coolant level monitoring system
Product Link ready
Radio ready, 12-volt
Rear view mirror
ROPS/FOPS cab with integrated A/C
Seat belt, retractable 76 mm (3 in)
Storage and literature compartment
Transmission shift points selection function on dash
3126 HEUI Caterpillar diesel engine with 24-volt starter
Air-to-air aftercooler
Auto-dust ejector with under hood air filter and pre-screener
Automatic down-shift and kickdown transmission control
Coolant, extended life
Coolant sampling port
Controlled throttle shifting
Decelerating function
Fan, blower
Fuel/water separator
Load compensated shifting
Modular radiator (IMRM)
Selectable shift points
Single poly-vee belt with auto belt tensioner
Steering system: Clutch and Brake with FTC
Three-speed planetary transmission with torque converter
Adjuster, hydraulic track
Carrier rollers
Guards, end track-guiding
Heavy-duty sealed and lubricated tracks
Lifetime lubricated track rollers and idlers
Wider tread and taller flange idler profile
4600 meter altitude operation capability without derating
Centralized remote mounted pressure taps for easy access
Crankcase guard
Ecology drains
Extended service intervals (500 hours)
Front pull device
Hinged engine doors
Hinged radiator grill
Implement oil filter
Keyed lockable enclosures
Load sensing hydraulics
Rigid drawbar
SOSSM taps for engine, transmission and implement fluids
Three valve hydraulics for VPAT dozer
Transmission remote pressure taps
10-amp/12-volt converter
70-amp alternator
Back-up alarm
Diagnostic connector
Horn
Hour meter
Integrated front lights
Odometer
Coat hook
Cup holder (LH)
Electric armrest
Electronic Monitoring System (EMS III)
Electronic travel speed and gear limiter
Engine air cleaner service indicator in the cab
Engine RPM display/gear display
Foot pegs for slope work
Four gauge cluster
FTC control for Clutch and Brake steering
Power points, two 12-volt
Pre-start coolant level monitoring system
Product Link ready
Radio ready, 12-volt
Rear view mirror
ROPS/FOPS cab with integrated A/C
Seat belt, retractable 76 mm (3 in)
Storage and literature compartment
Transmission shift points selection function on dash
3126 HEUI Caterpillar diesel engine with 24-volt starter
Air-to-air aftercooler
Auto-dust ejector with under hood air filter and pre-screener
Automatic down-shift and kickdown transmission control
Coolant, extended life
Coolant sampling port
Controlled throttle shifting
Decelerating function
Fan, blower
Fuel/water separator
Load compensated shifting
Modular radiator (IMRM)
Selectable shift points
Single poly-vee belt with auto belt tensioner
Steering system: Clutch and Brake with FTC
Three-speed planetary transmission with torque converter
Adjuster, hydraulic track
Carrier rollers
Guards, end track-guiding
Heavy-duty sealed and lubricated tracks
Lifetime lubricated track rollers and idlers
Wider tread and taller flange idler profile
4600 meter altitude operation capability without derating
Centralized remote mounted pressure taps for easy access
Crankcase guard
Ecology drains
Extended service intervals (500 hours)
Front pull device
Hinged engine doors
Hinged radiator grill
Implement oil filter
Keyed lockable enclosures
Load sensing hydraulics
Rigid drawbar
SOSSM taps for engine, transmission and implement fluids
Three valve hydraulics for VPAT dozer
Transmission remote pressure taps
3126 HEUI Caterpillar diesel engine with 24-volt starter
Air-to-air aftercooler
Auto-dust ejector with under hood air filter and pre-screener
Automatic down-shift and kickdown transmission control
Coolant, extended life
Coolant sampling port
Controlled throttle shifting
Decelerating function
Fan, blower
Fuel/water separator
Load compensated shifting
Modular radiator (IMRM)
Selectable shift points
Single poly-vee belt with auto belt tensioner
Steering system: Clutch and Brake with FTC
Three-speed planetary transmission with torque converter
Adjuster, hydraulic track
Carrier rollers
Guards, end track-guiding
Heavy-duty sealed and lubricated tracks
Lifetime lubricated track rollers and idlers
Wider tread and taller flange idler profile
4600 meter altitude operation capability without derating
Centralized remote mounted pressure taps for easy access
Crankcase guard
Ecology drains
Extended service intervals (500 hours)
Front pull device
Hinged engine doors
Hinged radiator grill
Implement oil filter
Keyed lockable enclosures
Load sensing hydraulics
Rigid drawbar
SOSSM taps for engine, transmission and implement fluids
Three valve hydraulics for VPAT dozer
Transmission remote pressure taps