D5N LGP Track-Type Tractor
Medium Dozers
-
Specification Summary
- Engine ModelCat 3126B DITAAC
- Flywheel Power90.3 kW
- Net Power – ISO 924990.3 kW
- Net Power – SAE J134989.4 kW
- Net Power – EU 80/126990.3 kW
Engine
| Engine Model | Cat 3126B DITAAC |
| Flywheel Power | 90.3 kW |
| Net Power – ISO 9249 | 90.3 kW |
| Net Power – SAE J1349 | 89.4 kW |
| Net Power – EU 80/1269 | 90.3 kW |
| Bore | 110 mm |
| Stroke | 127 mm |
| Displacement | 7.2 L |
Weights
| Operating Weight | 13530 kg |
| Operating Weight Power Shift FTC - LGP | 13530 kg |
| Shipping Weight FTC - LGP | 13251 kg |
Blades
| Blade Type | VPAT |
| LGP, VPAT – Blade Capacity | 2.6 m3 |
| LGP VPAT – Blade Width | 3360 mm |
Transmission
| 1.0 Forward | 3.2 km/h |
| 2.0 Forward | 5.6 km/h |
| 3.0 Forward | 10 km/h |
| 1.0 Reverse | 3.8 km/h |
| 2.0 Reverse | 6.7 km/h |
| 3.0 Reverse | 11.3 km/h |
| Drawbar Pull – 1.0 Forward | 225 kN |
| Drawbar Pull – 2.0 Forward | 123 kN |
| Drawbar Pull – 3.0 Forward | 68 kN |
Undercarriage
| Width of Shoe – LGP | 760 mm |
| Shoes/Side – LGP | 44 |
| Grouser Height | 47 mm |
| Track Gauge – LGP | 2000 mm |
| Track on Ground – LGP | 2604 mm |
| Ground Contact Area – LGP | 3.96 m2 |
| Ground Pressure | 34 kPa |
| Ground Pressure – LGP | 34 kPa |
| Track Rollers/Side – LGP | 8 |
Service Refill Capacities
| Fuel Tank | 257 L |
| Cooling System | 37 L |
| Final Drives (each) | 6 L |
| Hydraulic Tank | 29.5 L |
Winch
| Winch Model | PA55 |
| Weight* | 1180 kg |
| Oil Capacity | 74.1 L |
| Winch and Bracket Length | 1145 mm |
| Winch Case – Width | 975 mm |
| Drum Diameter | 254 mm |
| Drum Width | 315 mm |
| Flange Diameter | 504 mm |
Dimensions
| Drawbar Height (center of clevis) from ground face of shoes | 537 mm |
| Length of Track on Ground | 2604 mm |
| Ground Clearance | 422 mm |
| Track Gauge | 2000 mm |
| Width without Blade | 2760 mm |
| Height | 2849 mm |
| Height ROPS/Canopy | 3036 mm |
| Overall Length Basic Tractor (with Drawbar) | 3.72 mm |
Ripper
| Weight – With One Shank | 758 kg |
| Type | Fixed Radial |
| Number of Pockets | 3 |
| Overall Beam Width | 1951 mm |
| Beam Cross Section | 165x211 mm 6.5x8.3 in. |
| Maximum Penetration – LGP | 298 mm |
| Weight – Each Additional Shank | 34 kg |
Engine
The Caterpillar electronic 3126B DITAAC engine meets worldwide exhaust emission requirements for EPA Tier 2, EU Stage II, and Japan MOC Step 2 engine exhaust emission regulations and offers excellent performance levels.Cat 3126B Engine
The Cat 3126B engine is designed for easy maintenance and can be rebuilt for additional service lives. With the HEUI™ fuel system, injection pressure is independent of engine speed and provides maximum fuel delivery efficiency with low emissions. Equipped with an electronic air inlet heater, the 3126B warms the air in the air inlet manifold, for easier starting and reduces white smoke on cold starts. Machines will automatically activate the timed air inlet heater prior to engine startup.Turbocharged and Aftercooled
A well-matched turbocharger and air-to-air aftercooler results in higher power while keeping rpm steady and exhaust temperatures low.Torque Rise
The direct injected electronic fuel system provides a controlled fuel delivery increase as the engine lugs back from rated speed. This results in increased horsepower above rated power. A combination of increased torque rise and maximum horsepower improves response, provides greater drawbar pull and faster dozing cycles. • Increased power to 90.3 kW (121 hp) @ 2000 rpm rated speed.3126B Engine Features
Major features include:- Large displacement electronic engine with lower exhaust emissions and good cold start capability.
- Power train to engine link with controlled throttle shifting.
- Poly-Vee serpentine engine fan belt with auto tension feature eliminates the traditional three or four belt system.
- Oil and engine filter change intervals up to 500 hours after break-in.
- ATAAC cooling system.
- Aluminum bar plate radiator provides excellent cooling capability.
Drive Train
Rugged, durable and reliable components deliver smooth, responsive power and lasting reliability.Torque Converter
The D5N single-stage torque converter efficiently responds to changing load conditions by providing torque multiplication, therefore increasing drawbar pull. It provides protection to the drive train components by preventing shock loads from heavy dozing applications. The torque converter is efficiently matched to the power train components and provides the superior performance you need.Auto-Shift/Auto-Kickdown
Auto-shift allows the operator to pre-select a forward and reverse gear for easy, efficient directional changes. Auto-shift settings include:- First forward to second reverse.
- Second forward to second reverse.
- Second forward to first reverse.
Transmission
The proven planetary powershift transmission features three speeds forward and three speeds reverse and utilizes large diameter, high capacity, oil cooled clutches. To maximize the life of the transmission, the planetary design distributes loads and stresses over multiple gears.- Controlled throttle shifting regulates engine speed during high-energy directional shifts for smoother operation and longer component life.
- The transmission and bevel gear set are modular by design, and easily slide into the machine's rear case, even with the ripper installed.
- Forced oil flow lubricates and cools clutch packs to provide maximum clutch life.
- Load compensating shifting provides smooth engagement of the clutches under loaded conditions.
Steering Clutch and Brakes
Oil cooled, hydraulically actuated, large diameter plates and clutch discs provide higher torque capacity and increased service life.Elevated Final Drive
Final drives are isolated from ground and work tool induced impact loads for extended power train life.Electronic Steering and Transmission Controls
The D5N provides Finger Tip Control for steering. Soft touch buttons, located on the steering controls, shift the electronically controlled transmission.Electronic Clutch Pressure Control
The D5N has an additional transmission shifting feature for added performance and operator comfort — the Electronic Clutch Pressure Control (ECPC). This unique feature provides smoother shifting by regulating and modulating the individual clutches based on current operating conditions.Finger Tip Control
Finger Tip Control (FTC) combines steering, machine direction and gear selection into a single control system, which can be operated with one hand for enhanced operator comfort and increased productivity.Three Speed Forward/Reverse Gear Selection
Three speed forward/reverse gear selection is achieved simply by pressing the yellow speed selection buttons. These buttons are integrated into the Finger Tip Control group.- Automatic shifting features and reduced lever efforts provide easier upshift and downshift, increased operator comfort, reduced fatigue and shortened cycle times.
- Another feature aimed at operator comfort is electric vertical adjustment of the FTC control group. This helps position the operator's arm for efficient ergonomics.
Electronic Clutch and Brake Steering System
The electronic clutch and brake steering system incorporates low effort finger tip levers allowing the operator to work more precisely in close areas, around structures, obstacles and grade stakes. Pulling the left or right finger paddle causes the machine to turn according to the amount of paddle displacement.Machine Direction
Machine direction is controlled by moving the machine's transmission forward/neutral/reverse direction lever. The middle position puts the machine transmission in neutral.1) Operator Station
State-of-the-art operator station has reduced sound levels, lower cab vibration and increased glass area.2) Steering Control
Finger Tip Control (FTC) steering system provides simultaneous one-handed steering and transmission control.3) Power Shift Transmission
Proven planetary design provides fast smooth speed changes while distributing loads over multiple gears for long life.4) Final Drive
Caterpillar elevated final drives provide isolation from ground or work tool impact loads, extending service life.5) Clutch/Brake Assembly
Oil cooled large diameter clutch and brake disc provide long service life.6) Engine
Caterpillar 3126B HEUI engine meets worldwide engine exhaust emission regulations.7) Radiator
Aluminum bar plate radiator provides excellent heat transfer.8) Torque Converter
Efficient torque converter provides torque multiplication for increased drawbar pull and protects the drive train from shock loads.Operator Station
State-of-the-art operator station has reduced sound levels, low cab vibrations and excellent visibility. The (optional) Caterpillar comfort series air suspension seat helps reduce operator fatigue. Cab and air conditioning are standard.Cab
The design is spacious and comfortable to promote shift-long productivity. Large glass window and door panels allow for excellent visibility to the blade, rear and sides of the machine. Door and window seal design allows for a fully pressurized low dust cab. Acoustic headliner material, and sound suppression foam panels reduce sound levels to 79 dB(A) according to the dynamic test procedure and conditions that are specified in ISO 6394:1998. Individual windshield wiper controls are located in the front section of the headliner. The cooling system is incorporated into the cab structure providing good visibility to the rear of the machine.Cat C500 Comfort Suspension Seat
Caterpillar C500 Comfort Series Air Suspended Seat is ergonomically designed to support the operator in various site conditions (optional).- Seat is fully adjustable for maximum operator comfort, support and reduced operator fatigue.
- Seat cushion reduces pressure on the lower back and thighs while allowing unrestricted arm and leg movement.
- A standard lumbar adjustment provides lower back comfort.
Dash
The instrument panel, with easy to read analog gauges and warning lamps, keeps the operator aware of any potential problems. All gauges and readouts are easily visible in direct sunlight. HVAC controls and vents are conveniently located on the dash to provide climate control for the operator. Auto-shift and Auto-kickdown controls are located within easy reach. Footpads keep the operator stable and comfortable while working on slopes.Electronic Monitoring System (EMS III)
EMS III provides the operator instant feedback on machine conditions and records performance data to help diagnose problems. It has flashable memory allowing system upgrades, as new technology and software become available. The system is compatible with Cat ET and CMS service tools. EMS includes gauges and readouts for:- Fuel level gauge
- Hydraulic oil temperature gauge
- Engine coolant temperature gauge
- Power train oil temperature gauge
- Engine oil pressure indicator
- Engine speed digital readout
- Transmission gear indicator
- Hour Meter
- Odometer
Throttle Rocker Switch
A rocker switch control activates high or low idle with a touch of the finger. A decelerator pedal gives the operator full control of engine speed when the rocker switch is in the high idle position.Work Tool Controls
Low effort pilot operated hydraulic controls make the D5N easy to operate and provide sure, precise blade control with less operator fatigue. Ergonomically shaped blade and ripper controls provide increased operator comfort during long shifts.AccuGrade® Laser and GPS Machine Control Guidance Systems
Advanced Laser and GPS technology improves operator accuracy, increases production and lowers operating costs.AccuGrade Ready Option (ARO)
The AccuGrade Ready Option (ARO) provides a factory installed on-board platform for the AccuGrade Laser System or the AccuGrade GPS installation. All of the changes required to the electrical system, hydraulic system, blade, and cab are incorporated into the ARO. Mounting brackets added on the blade allow easy installation of the masts. Mounting brackets in the cab secure the in-cab display. Plug-in points inside the cab and on the front of the machine make it easy to install electronic components.Advantages
Current earthmoving and fine grading processes are labor intensive, dependent on manpower and instruments. Maintaining consistent grade between stakes is challenging, even for experienced operators. The AccuGrade Laser and GPS Machine Control and Guidance Systems reduce labor requirements and help operators work to the design plan by accurately cutting, filling and reducing material cost.Automatic Blade Control Feature
Automatic control of the blade’s lift and/or tilt, provides consistent accuracy with higher productivity by reducing blade control demands on the operator. Based on correction signals, a hydraulic control valve automatically raises or lowers the blade to maintain the correct edge elevation.Applications
The AccuGrade Laser and GPS systems are designed for a wide range of construction earthmoving applications requiring tight tolerances and high productivity rates. Choosing whether to use a Laser or GPS system depends on the job site requirements.AccuGrade Laser Grade Control System
The laser system is ideal for fine grading sites with flat, single slope or dual slope surfaces such as industrial, commercial and residential building sites.4) Laser In-Cab Display
The in-cab display with easy-to-read grade indicator and backlit elevation display shows the operator all AccuGrade system information. The in-cab display arrows show the blade’s position relative to grade and indicate cut or fill requirements of the work area. Push button operation allows the operator to easily switch from manual mode for rough grading to automatic mode for fine grading.AccuGrade GPS Control System
The AccuGrade Global Positioning System (GPS) is the best solution when the construction site involves contours, rather than single or dual slope planes. A GPS system compares the blade position to a three-dimensional computerized job site plan and signals the operator or hydraulic system to raise or lower the blade to achieve the design requirements.GPS In-Cab Display
The in-cab display provides real-time operating information to the operator. Designed for simple operation, the 140 mm (5.5 in) color LCD daylight readable display with keypad allows operators to easily interface with the system. Settings and views can be easily configured according to operator preference. The display is designed for reliable performance in extreme operating conditions including shock, dust and moisture.Weatherproof Design
All AccuGrade components are designed for dependable performance in harsh environments.Support
Caterpillar AccuGrade Laser and GPS systems are available at your local Caterpillar Dealer.Structure
Engineered and built to give solid support in the most demanding applications. Designed to last throughout the extended service life of the D5N.Frame and Castings
The D5N case and frames are built to absorb high impact shock loads and torsional forces. Castings are strategically located within the frame to add additional strength. Caterpillar uses robotic welding techniques in the assembly of the case and frames. This ensures quality and reliability throughout the structure.- High strength steel mainframe resists impact shock loads.
- Computer-aided finite element analysis is used to evaluate and ensure high durability of the chassis by computer modeling it and identifying high stress area.
- Full scale structural testing to test integrity of the structures.
- Robotic welding provides deep penetration and consistency for long life, and reduces the chance for errors which may be made during manual welding.
- Precision top level machining for perfect alignment of bores and surfaces minimizes out of tolerance wear patterns and improves durability.
- Pivot shaft and pinned equalizer bar to maintain track roller frame alignment.
Equalizer Bar
The pinned equalizer bar gives the roller frames the ability to oscillate up or down to better match ground contours while providing maximum traction and operator comfort.Roll Over Protection System
N-Series cab supports have been stiffened. Stiffer cab supports result in lower noise and vibration in the cab, providing the operator increased comfort.Quality and Reliability
- Doubled 4 mm (0.16 in) sheet metal on the side service access panels and rear guard.
- Stamped, rounded sheet metal corners add strength.
- Rubber isolation mounted fuel tank eliminates tank vibration and reduces potential stress fractures.
- Heavy-duty reinforced radiator guard is now standard.
- Heavy-duty rear guard for ripper.
- Clipped seals provide protection from dust and moisture for rear enclosure, door openings, and between ROPS post and rear enclosure.
Styling
Rounded machine shapes offers excellent visibility, accessibility and serviceability.- Durable, heavy steel door panel covers.
- Pre-cleaner is below the hood for good visibility.
- Engine enclosure is tapered as it reaches the cab.
- Large amounts of glass area in cab.
- Controls are ergonomic for easier operation and better efficiency.
Undercarriage
The Caterpillar elevated sprocket undercarriage arrangements are designed for optimized balance and performance in fine grading to heavy dozing applications. Rugged design and proven structural manufacturing assure outstanding durability.Elevated Final Drive
- Isolates final drives from ground and work tool induced impact loads for extended power train life.
- Keeps sprocket teeth, bushings and final drives away from abrasive materials and moisture.
- Single reduction planetary final drives in the D5N provide long-lasting performance and durability.
Undercarriage Arrangements
XL (Extra Long) arrangement- Forward idler position provides more track on the ground and to the front of the tractor. It provides optimal balance, superior traction and blade control for finish grading.
- Long roller frame improves flotation in soft underfoot conditions. LGP (Low Ground Pressure) arrangement
- Specially designed to work in soft and spongy conditions.
- Wide track shoes, long track frames and a wider gauge increase track contact area and reduce ground pressure for excellent flotation.
Complete Guarding
Caterpillar undercarriages are designed with full length guarding on top of the track roller frame. This prevents abrasive materials from falling down on moving parts.Roller Frames
Roller frames are tubular, to resist bending and twisting. • Roller frames attach to the tractor by a pivot shaft and pinned equalizer bar.SystemOne™ Undercarriage
Exclusively for Caterpillar machines the design extends system life and reduces operating costs.- Track joint cartridge controls end-play and critical characteristics of sealed joint for improved reliability.
- Rotating bushing eliminates the need to turn bushings and reduces costly downtime.
- Taller roller flanges and link rails improve track guiding and eliminate pin end damage.
- Center tread idler eliminates idler link scalloping.
- May be used in any application.
Oscillating Undercarriage
The pinned equalizer bar is saddle-mounted beneath the mainframe, allowing the roller frames and track to oscillate. The oscillation provides a steady working platform and smooth ride for the operator.Work Tools
Cat Work Tools and Ground Engaging Tools (G.E.T.) are designed to provide strength and flexibility to match the machine to the job, maximizing performance.Caterpillar Blades
With superior moldboard and 4-cell structure design, Cat bulldozer blades hold up to the toughest job conditions. Our high-tensile strength blades resist torsional bending and deflection in tough applications.- High-tensile strength, Cat DH-2™ steel, cutting edges resist bending.
- DH-3™ steel end bits maximize service life.
Variable Pitch Power Angle and Tilt Blade (VPAT)
The VPAT blade gives the operator the ability to hydraulically adjust the blade lift, angle and tilt from the operator station.- Manually adjustable blade pitch for optimum performance.
- Top corners of the blade are clipped for better operator viewing area. (XL arrangement only)
- C-Frame is solidly pinned to the mainframe for good blade control and eliminates blade motion due to track oscillation or side forces.
- C-Frame to tractor joint is sealed and lubricated with remote lines for extended service life and quiet operation.
- Large C-Frame tower bearings improve durability.
- Lubrication points are located at all pin joints to reduce wear.
Multi-Shank Ripper
The multi-shank radial ripper lets you choose one, two or three shanks depending on job conditions.- Curved or straight ripper shanks are available.
- Excellent chassis durability in severe drawbar applications.
Drawbar
The D5N is equipped with a drawbar for pulling work tools such as:- Disks
- Compactors
- Chopper wheels
- Retrieval of other equipment
Winch
- Single joystick electronically controls both clutch and brake functions for excellent operator efficiency.
- Input clutches on PTO shaft reduce engine horsepower loss for fuel efficiency.
- Clutch engagement and brake release are automatically synchronized for smooth operation.
- Winch components can be serviced with winch mounted on tractor.
Forestry Sweeps
In forestry and land clearing applications where limbs and debris can damage a machine, optional sweeps are available for the N-Series. Sweeps help to shield critical components on the tractor such as hydraulic lines, exhaust stacks, cab windows and lights from damage.Rear Counterweight
Rear counterweights are available through Custom Products and can be used to help the machine's balance in severe applications such as backing up slopes or heavy angle dozing.Serviceability
Modular design moves Caterpillar a generation ahead in simplifying service and maintenance.Built-in Serviceability
Less service time means more working time. Major components are designed as modules and most can be removed without disturbing or removing other components.Diagnostic Connector
Diagnostic connector allows Caterpillar dealers to quickly troubleshoot or access stored data with the use of Electronic Technician (Cat ET) or ECAP.Product Link
This option allows the customer or dealer to obtain machine diagnostics and location from their offices. Product Link provides updates on service meter hours, machine condition, machine location as well as integrated mapping/route planning.Electronic Monitoring System
The D5N features a flexible monitoring system that is easily upgraded by flashing software rather than replacing the module, reducing parts cost. As technology changes and new electronics and software become available, the monitoring system will allow the machine to be easily updated.Ecology Drains
Ecology drains provide an environmentally safer method to drain fluids. They are included on the radiator, hydraulic tank and major power train components.Modular Cooling System
Individual radiator core modules are easily serviced without major component removal.Easy Engine Maintenance
Many parts can be rebuilt and are available as remanufactured components.- Parent-metal block can be rebored twice and dry-sleeved.
- Connecting rods can be removed through cylinder tops.
- Camshaft followers and push rods can be replaced without removing camshaft.
- Extended oil and engine filter change intervals up to 500 hours.
Accessibility
- Hinged engine doors to increase engine and service access.
- Remote-mounted filters located within easy reach during PM service.
- Air pre-cleaner filter condition monitor located in the cab for high visibility.
- Redesigned fuel tank for easier internal cleaning.
- Fast fuel tank provision added (attachment).
- Larger service panel doors.
- Diagnostic test ports added for quick troubleshooting.
Total Customer Support
Your Cat dealer offers a wide range of services that can be set up with a Customer Support Agreement. The Dealer can customize a plan for you, from PM service to total machine maintenance, allowing you to optimize your return on investment.Product Support
Your Cat Dealer offers a wide range of services that can be set up under a Customer Support Agreement (CSA) when you purchase your equipment. The dealer will help you choose a plan that can cover everything from the machine and attachment selection to replacement. This will help you get the best return on your investment.Remanufactured Components
Save money with remanufactured parts. You receive the same warranty and reliability as new products at a cost savings of 40 to 70 percent.Service Capability
Whether in the dealer’s fully equipped shop or in the field, you will get trained service technicians using the latest technology and tools.Selection
Make detailed comparisons of the machines you are considering before you buy. How long do components last? What is the cost of preventive maintenance? What is the true cost of lost production? Your Cat Dealer can give you answers to these questions.Operation
Improving operating techniques can boost your profits. Your Cat Dealer has training videotapes, literature and other ideas to help you increase productivity.Replacement
Repair, rebuild or replace? Your Cat Dealer can help evaluate the cost involved so you can make the right choice.Maintenance
More and more equipment buyers are planning for effective maintenance before buying equipment. Choose from your dealer’s wide range of maintenance services at the time of your purchase. Repair option programs guarantee the cost of repairs up front. Diagnostic programs such as Scheduled Oil Sampling and Technical Analysis help avoid unscheduled repairs.ELECTRICAL
10-amp/12-volt converter
70-amp alternator
Back-up alarm
Diagnostic connector
Horn
Hour meter
Integrated front lights
Odometer
OPERATOR ENVIRONMENT
Coat hook
Cup holder (LH)
Electric armrest
Electronic Monitoring System (EMS III)
Electronic travel speed and gear limiter
Engine air cleaner service indicator in the cab
Engine RPM display/gear display
Foot pegs for slope work
Four gauge cluster
FTC control for Clutch and Brake steering
Hydraulic Pilot Control
Power points, two 12-volt
Pre-start coolant level monitoring system
Product Link ready
Radio ready, 12-volt
Rear view mirror
ROPS, FOPS cab with integrated A/C
Seat belt, retractable 76 mm (3 in)
Storage and literature compartment
Transmission shift points selection function on dash
Coat hook
10-amp/12-volt converter
70-amp alternator
Back-up alarm
Diagnostic connector
Horn
Hour meter
Integrated front lights
Odometer
Coat hook
Cup holder (LH)
Electric armrest
Electronic Monitoring System (EMS III)
Electronic travel speed and gear limiter
Engine air cleaner service indicator in the cab
Engine RPM display/gear display
Foot pegs for slope work
Four gauge cluster
FTC control for Clutch and Brake steering
Hydraulic Pilot Control
Power points, two 12-volt
Pre-start coolant level monitoring system
Product Link ready
Radio ready, 12-volt
Rear view mirror
ROPS, FOPS cab with integrated A/C
Seat belt, retractable 76 mm (3 in)
Storage and literature compartment
Transmission shift points selection function on dash
3126B HEUI Caterpillar diesel engine with 24-volt starter
Air-to-air aftercooler
Auto-dust ejector with under hood air filter and pre-screener
Automatic down-shift and kickdown transmission control
Coolant, extended life
Coolant sampling port
Controlled throttle shifting
Decelerating function
Fan, blower
Fuel/water separator
High efficiency aluminum cooling package
Load compensated shifting
Selectable shift points
Single poly-vee belt with auto belt tensioner
Steering system: Clutch and Brake with FTC
Three-speed planetary transmission with torque converter
Adjuster, hydraulic track
Carrier rollers
Guards, end track-guiding
Heavy-duty sealed and lubricated tracks
Lifetime lubricated track rollers and idlers
Wider tread and taller flange idler profile
4600 meter altitude operation capability without derating
Centralized remote mounted pressure taps for easy access
Crankcase guard
Ecology drains
Extended service intervals (500 hours)
Front pull device
Hinged engine doors
Hinged radiator grille
Implement oil filter
Keyed lockable enclosures
Load sensing hydraulics
Rigid drawbar
SOSSM taps for engine, transmission and implement fluids
Three-valve hydraulics for VPAT-Blade
Transmission remote pressure taps
Cup holder (LH)
10-amp/12-volt converter
70-amp alternator
Back-up alarm
Diagnostic connector
Horn
Hour meter
Integrated front lights
Odometer
Coat hook
Cup holder (LH)
Electric armrest
Electronic Monitoring System (EMS III)
Electronic travel speed and gear limiter
Engine air cleaner service indicator in the cab
Engine RPM display/gear display
Foot pegs for slope work
Four gauge cluster
FTC control for Clutch and Brake steering
Hydraulic Pilot Control
Power points, two 12-volt
Pre-start coolant level monitoring system
Product Link ready
Radio ready, 12-volt
Rear view mirror
ROPS, FOPS cab with integrated A/C
Seat belt, retractable 76 mm (3 in)
Storage and literature compartment
Transmission shift points selection function on dash
3126B HEUI Caterpillar diesel engine with 24-volt starter
Air-to-air aftercooler
Auto-dust ejector with under hood air filter and pre-screener
Automatic down-shift and kickdown transmission control
Coolant, extended life
Coolant sampling port
Controlled throttle shifting
Decelerating function
Fan, blower
Fuel/water separator
High efficiency aluminum cooling package
Load compensated shifting
Selectable shift points
Single poly-vee belt with auto belt tensioner
Steering system: Clutch and Brake with FTC
Three-speed planetary transmission with torque converter
Adjuster, hydraulic track
Carrier rollers
Guards, end track-guiding
Heavy-duty sealed and lubricated tracks
Lifetime lubricated track rollers and idlers
Wider tread and taller flange idler profile
4600 meter altitude operation capability without derating
Centralized remote mounted pressure taps for easy access
Crankcase guard
Ecology drains
Extended service intervals (500 hours)
Front pull device
Hinged engine doors
Hinged radiator grille
Implement oil filter
Keyed lockable enclosures
Load sensing hydraulics
Rigid drawbar
SOSSM taps for engine, transmission and implement fluids
Three-valve hydraulics for VPAT-Blade
Transmission remote pressure taps
Electric armrest
10-amp/12-volt converter
70-amp alternator
Back-up alarm
Diagnostic connector
Horn
Hour meter
Integrated front lights
Odometer
Coat hook
Cup holder (LH)
Electric armrest
Electronic Monitoring System (EMS III)
Electronic travel speed and gear limiter
Engine air cleaner service indicator in the cab
Engine RPM display/gear display
Foot pegs for slope work
Four gauge cluster
FTC control for Clutch and Brake steering
Hydraulic Pilot Control
Power points, two 12-volt
Pre-start coolant level monitoring system
Product Link ready
Radio ready, 12-volt
Rear view mirror
ROPS, FOPS cab with integrated A/C
Seat belt, retractable 76 mm (3 in)
Storage and literature compartment
Transmission shift points selection function on dash
3126B HEUI Caterpillar diesel engine with 24-volt starter
Air-to-air aftercooler
Auto-dust ejector with under hood air filter and pre-screener
Automatic down-shift and kickdown transmission control
Coolant, extended life
Coolant sampling port
Controlled throttle shifting
Decelerating function
Fan, blower
Fuel/water separator
High efficiency aluminum cooling package
Load compensated shifting
Selectable shift points
Single poly-vee belt with auto belt tensioner
Steering system: Clutch and Brake with FTC
Three-speed planetary transmission with torque converter
Adjuster, hydraulic track
Carrier rollers
Guards, end track-guiding
Heavy-duty sealed and lubricated tracks
Lifetime lubricated track rollers and idlers
Wider tread and taller flange idler profile
4600 meter altitude operation capability without derating
Centralized remote mounted pressure taps for easy access
Crankcase guard
Ecology drains
Extended service intervals (500 hours)
Front pull device
Hinged engine doors
Hinged radiator grille
Implement oil filter
Keyed lockable enclosures
Load sensing hydraulics
Rigid drawbar
SOSSM taps for engine, transmission and implement fluids
Three-valve hydraulics for VPAT-Blade
Transmission remote pressure taps
Electronic Monitoring System (EMS III)
10-amp/12-volt converter
70-amp alternator
Back-up alarm
Diagnostic connector
Horn
Hour meter
Integrated front lights
Odometer
Coat hook
Cup holder (LH)
Electric armrest
Electronic Monitoring System (EMS III)
Electronic travel speed and gear limiter
Engine air cleaner service indicator in the cab
Engine RPM display/gear display
Foot pegs for slope work
Four gauge cluster
FTC control for Clutch and Brake steering
Hydraulic Pilot Control
Power points, two 12-volt
Pre-start coolant level monitoring system
Product Link ready
Radio ready, 12-volt
Rear view mirror
ROPS, FOPS cab with integrated A/C
Seat belt, retractable 76 mm (3 in)
Storage and literature compartment
Transmission shift points selection function on dash
3126B HEUI Caterpillar diesel engine with 24-volt starter
Air-to-air aftercooler
Auto-dust ejector with under hood air filter and pre-screener
Automatic down-shift and kickdown transmission control
Coolant, extended life
Coolant sampling port
Controlled throttle shifting
Decelerating function
Fan, blower
Fuel/water separator
High efficiency aluminum cooling package
Load compensated shifting
Selectable shift points
Single poly-vee belt with auto belt tensioner
Steering system: Clutch and Brake with FTC
Three-speed planetary transmission with torque converter
Adjuster, hydraulic track
Carrier rollers
Guards, end track-guiding
Heavy-duty sealed and lubricated tracks
Lifetime lubricated track rollers and idlers
Wider tread and taller flange idler profile
4600 meter altitude operation capability without derating
Centralized remote mounted pressure taps for easy access
Crankcase guard
Ecology drains
Extended service intervals (500 hours)
Front pull device
Hinged engine doors
Hinged radiator grille
Implement oil filter
Keyed lockable enclosures
Load sensing hydraulics
Rigid drawbar
SOSSM taps for engine, transmission and implement fluids
Three-valve hydraulics for VPAT-Blade
Transmission remote pressure taps
Electronic travel speed and gear limiter
10-amp/12-volt converter
70-amp alternator
Back-up alarm
Diagnostic connector
Horn
Hour meter
Integrated front lights
Odometer
Coat hook
Cup holder (LH)
Electric armrest
Electronic Monitoring System (EMS III)
Electronic travel speed and gear limiter
Engine air cleaner service indicator in the cab
Engine RPM display/gear display
Foot pegs for slope work
Four gauge cluster
FTC control for Clutch and Brake steering
Hydraulic Pilot Control
Power points, two 12-volt
Pre-start coolant level monitoring system
Product Link ready
Radio ready, 12-volt
Rear view mirror
ROPS, FOPS cab with integrated A/C
Seat belt, retractable 76 mm (3 in)
Storage and literature compartment
Transmission shift points selection function on dash
3126B HEUI Caterpillar diesel engine with 24-volt starter
Air-to-air aftercooler
Auto-dust ejector with under hood air filter and pre-screener
Automatic down-shift and kickdown transmission control
Coolant, extended life
Coolant sampling port
Controlled throttle shifting
Decelerating function
Fan, blower
Fuel/water separator
High efficiency aluminum cooling package
Load compensated shifting
Selectable shift points
Single poly-vee belt with auto belt tensioner
Steering system: Clutch and Brake with FTC
Three-speed planetary transmission with torque converter
Adjuster, hydraulic track
Carrier rollers
Guards, end track-guiding
Heavy-duty sealed and lubricated tracks
Lifetime lubricated track rollers and idlers
Wider tread and taller flange idler profile
4600 meter altitude operation capability without derating
Centralized remote mounted pressure taps for easy access
Crankcase guard
Ecology drains
Extended service intervals (500 hours)
Front pull device
Hinged engine doors
Hinged radiator grille
Implement oil filter
Keyed lockable enclosures
Load sensing hydraulics
Rigid drawbar
SOSSM taps for engine, transmission and implement fluids
Three-valve hydraulics for VPAT-Blade
Transmission remote pressure taps
Engine air cleaner service indicator in the cab
10-amp/12-volt converter
70-amp alternator
Back-up alarm
Diagnostic connector
Horn
Hour meter
Integrated front lights
Odometer
Coat hook
Cup holder (LH)
Electric armrest
Electronic Monitoring System (EMS III)
Electronic travel speed and gear limiter
Engine air cleaner service indicator in the cab
Engine RPM display/gear display
Foot pegs for slope work
Four gauge cluster
FTC control for Clutch and Brake steering
Hydraulic Pilot Control
Power points, two 12-volt
Pre-start coolant level monitoring system
Product Link ready
Radio ready, 12-volt
Rear view mirror
ROPS, FOPS cab with integrated A/C
Seat belt, retractable 76 mm (3 in)
Storage and literature compartment
Transmission shift points selection function on dash
3126B HEUI Caterpillar diesel engine with 24-volt starter
Air-to-air aftercooler
Auto-dust ejector with under hood air filter and pre-screener
Automatic down-shift and kickdown transmission control
Coolant, extended life
Coolant sampling port
Controlled throttle shifting
Decelerating function
Fan, blower
Fuel/water separator
High efficiency aluminum cooling package
Load compensated shifting
Selectable shift points
Single poly-vee belt with auto belt tensioner
Steering system: Clutch and Brake with FTC
Three-speed planetary transmission with torque converter
Adjuster, hydraulic track
Carrier rollers
Guards, end track-guiding
Heavy-duty sealed and lubricated tracks
Lifetime lubricated track rollers and idlers
Wider tread and taller flange idler profile
4600 meter altitude operation capability without derating
Centralized remote mounted pressure taps for easy access
Crankcase guard
Ecology drains
Extended service intervals (500 hours)
Front pull device
Hinged engine doors
Hinged radiator grille
Implement oil filter
Keyed lockable enclosures
Load sensing hydraulics
Rigid drawbar
SOSSM taps for engine, transmission and implement fluids
Three-valve hydraulics for VPAT-Blade
Transmission remote pressure taps
Engine RPM display/gear display
10-amp/12-volt converter
70-amp alternator
Back-up alarm
Diagnostic connector
Horn
Hour meter
Integrated front lights
Odometer
Coat hook
Cup holder (LH)
Electric armrest
Electronic Monitoring System (EMS III)
Electronic travel speed and gear limiter
Engine air cleaner service indicator in the cab
Engine RPM display/gear display
Foot pegs for slope work
Four gauge cluster
FTC control for Clutch and Brake steering
Hydraulic Pilot Control
Power points, two 12-volt
Pre-start coolant level monitoring system
Product Link ready
Radio ready, 12-volt
Rear view mirror
ROPS, FOPS cab with integrated A/C
Seat belt, retractable 76 mm (3 in)
Storage and literature compartment
Transmission shift points selection function on dash
3126B HEUI Caterpillar diesel engine with 24-volt starter
Air-to-air aftercooler
Auto-dust ejector with under hood air filter and pre-screener
Automatic down-shift and kickdown transmission control
Coolant, extended life
Coolant sampling port
Controlled throttle shifting
Decelerating function
Fan, blower
Fuel/water separator
High efficiency aluminum cooling package
Load compensated shifting
Selectable shift points
Single poly-vee belt with auto belt tensioner
Steering system: Clutch and Brake with FTC
Three-speed planetary transmission with torque converter
Adjuster, hydraulic track
Carrier rollers
Guards, end track-guiding
Heavy-duty sealed and lubricated tracks
Lifetime lubricated track rollers and idlers
Wider tread and taller flange idler profile
4600 meter altitude operation capability without derating
Centralized remote mounted pressure taps for easy access
Crankcase guard
Ecology drains
Extended service intervals (500 hours)
Front pull device
Hinged engine doors
Hinged radiator grille
Implement oil filter
Keyed lockable enclosures
Load sensing hydraulics
Rigid drawbar
SOSSM taps for engine, transmission and implement fluids
Three-valve hydraulics for VPAT-Blade
Transmission remote pressure taps
Foot pegs for slope work
10-amp/12-volt converter
70-amp alternator
Back-up alarm
Diagnostic connector
Horn
Hour meter
Integrated front lights
Odometer
Coat hook
Cup holder (LH)
Electric armrest
Electronic Monitoring System (EMS III)
Electronic travel speed and gear limiter
Engine air cleaner service indicator in the cab
Engine RPM display/gear display
Foot pegs for slope work
Four gauge cluster
FTC control for Clutch and Brake steering
Hydraulic Pilot Control
Power points, two 12-volt
Pre-start coolant level monitoring system
Product Link ready
Radio ready, 12-volt
Rear view mirror
ROPS, FOPS cab with integrated A/C
Seat belt, retractable 76 mm (3 in)
Storage and literature compartment
Transmission shift points selection function on dash
3126B HEUI Caterpillar diesel engine with 24-volt starter
Air-to-air aftercooler
Auto-dust ejector with under hood air filter and pre-screener
Automatic down-shift and kickdown transmission control
Coolant, extended life
Coolant sampling port
Controlled throttle shifting
Decelerating function
Fan, blower
Fuel/water separator
High efficiency aluminum cooling package
Load compensated shifting
Selectable shift points
Single poly-vee belt with auto belt tensioner
Steering system: Clutch and Brake with FTC
Three-speed planetary transmission with torque converter
Adjuster, hydraulic track
Carrier rollers
Guards, end track-guiding
Heavy-duty sealed and lubricated tracks
Lifetime lubricated track rollers and idlers
Wider tread and taller flange idler profile
4600 meter altitude operation capability without derating
Centralized remote mounted pressure taps for easy access
Crankcase guard
Ecology drains
Extended service intervals (500 hours)
Front pull device
Hinged engine doors
Hinged radiator grille
Implement oil filter
Keyed lockable enclosures
Load sensing hydraulics
Rigid drawbar
SOSSM taps for engine, transmission and implement fluids
Three-valve hydraulics for VPAT-Blade
Transmission remote pressure taps
Four gauge cluster
10-amp/12-volt converter
70-amp alternator
Back-up alarm
Diagnostic connector
Horn
Hour meter
Integrated front lights
Odometer
Coat hook
Cup holder (LH)
Electric armrest
Electronic Monitoring System (EMS III)
Electronic travel speed and gear limiter
Engine air cleaner service indicator in the cab
Engine RPM display/gear display
Foot pegs for slope work
Four gauge cluster
FTC control for Clutch and Brake steering
Hydraulic Pilot Control
Power points, two 12-volt
Pre-start coolant level monitoring system
Product Link ready
Radio ready, 12-volt
Rear view mirror
ROPS, FOPS cab with integrated A/C
Seat belt, retractable 76 mm (3 in)
Storage and literature compartment
Transmission shift points selection function on dash
3126B HEUI Caterpillar diesel engine with 24-volt starter
Air-to-air aftercooler
Auto-dust ejector with under hood air filter and pre-screener
Automatic down-shift and kickdown transmission control
Coolant, extended life
Coolant sampling port
Controlled throttle shifting
Decelerating function
Fan, blower
Fuel/water separator
High efficiency aluminum cooling package
Load compensated shifting
Selectable shift points
Single poly-vee belt with auto belt tensioner
Steering system: Clutch and Brake with FTC
Three-speed planetary transmission with torque converter
Adjuster, hydraulic track
Carrier rollers
Guards, end track-guiding
Heavy-duty sealed and lubricated tracks
Lifetime lubricated track rollers and idlers
Wider tread and taller flange idler profile
4600 meter altitude operation capability without derating
Centralized remote mounted pressure taps for easy access
Crankcase guard
Ecology drains
Extended service intervals (500 hours)
Front pull device
Hinged engine doors
Hinged radiator grille
Implement oil filter
Keyed lockable enclosures
Load sensing hydraulics
Rigid drawbar
SOSSM taps for engine, transmission and implement fluids
Three-valve hydraulics for VPAT-Blade
Transmission remote pressure taps
FTC control for Clutch and Brake steering
10-amp/12-volt converter
70-amp alternator
Back-up alarm
Diagnostic connector
Horn
Hour meter
Integrated front lights
Odometer
Coat hook
Cup holder (LH)
Electric armrest
Electronic Monitoring System (EMS III)
Electronic travel speed and gear limiter
Engine air cleaner service indicator in the cab
Engine RPM display/gear display
Foot pegs for slope work
Four gauge cluster
FTC control for Clutch and Brake steering
Hydraulic Pilot Control
Power points, two 12-volt
Pre-start coolant level monitoring system
Product Link ready
Radio ready, 12-volt
Rear view mirror
ROPS, FOPS cab with integrated A/C
Seat belt, retractable 76 mm (3 in)
Storage and literature compartment
Transmission shift points selection function on dash
3126B HEUI Caterpillar diesel engine with 24-volt starter
Air-to-air aftercooler
Auto-dust ejector with under hood air filter and pre-screener
Automatic down-shift and kickdown transmission control
Coolant, extended life
Coolant sampling port
Controlled throttle shifting
Decelerating function
Fan, blower
Fuel/water separator
High efficiency aluminum cooling package
Load compensated shifting
Selectable shift points
Single poly-vee belt with auto belt tensioner
Steering system: Clutch and Brake with FTC
Three-speed planetary transmission with torque converter
Adjuster, hydraulic track
Carrier rollers
Guards, end track-guiding
Heavy-duty sealed and lubricated tracks
Lifetime lubricated track rollers and idlers
Wider tread and taller flange idler profile
4600 meter altitude operation capability without derating
Centralized remote mounted pressure taps for easy access
Crankcase guard
Ecology drains
Extended service intervals (500 hours)
Front pull device
Hinged engine doors
Hinged radiator grille
Implement oil filter
Keyed lockable enclosures
Load sensing hydraulics
Rigid drawbar
SOSSM taps for engine, transmission and implement fluids
Three-valve hydraulics for VPAT-Blade
Transmission remote pressure taps
Hydraulic Pilot Control
10-amp/12-volt converter
70-amp alternator
Back-up alarm
Diagnostic connector
Horn
Hour meter
Integrated front lights
Odometer
Coat hook
Cup holder (LH)
Electric armrest
Electronic Monitoring System (EMS III)
Electronic travel speed and gear limiter
Engine air cleaner service indicator in the cab
Engine RPM display/gear display
Foot pegs for slope work
Four gauge cluster
FTC control for Clutch and Brake steering
Hydraulic Pilot Control
Power points, two 12-volt
Pre-start coolant level monitoring system
Product Link ready
Radio ready, 12-volt
Rear view mirror
ROPS, FOPS cab with integrated A/C
Seat belt, retractable 76 mm (3 in)
Storage and literature compartment
Transmission shift points selection function on dash
3126B HEUI Caterpillar diesel engine with 24-volt starter
Air-to-air aftercooler
Auto-dust ejector with under hood air filter and pre-screener
Automatic down-shift and kickdown transmission control
Coolant, extended life
Coolant sampling port
Controlled throttle shifting
Decelerating function
Fan, blower
Fuel/water separator
High efficiency aluminum cooling package
Load compensated shifting
Selectable shift points
Single poly-vee belt with auto belt tensioner
Steering system: Clutch and Brake with FTC
Three-speed planetary transmission with torque converter
Adjuster, hydraulic track
Carrier rollers
Guards, end track-guiding
Heavy-duty sealed and lubricated tracks
Lifetime lubricated track rollers and idlers
Wider tread and taller flange idler profile
4600 meter altitude operation capability without derating
Centralized remote mounted pressure taps for easy access
Crankcase guard
Ecology drains
Extended service intervals (500 hours)
Front pull device
Hinged engine doors
Hinged radiator grille
Implement oil filter
Keyed lockable enclosures
Load sensing hydraulics
Rigid drawbar
SOSSM taps for engine, transmission and implement fluids
Three-valve hydraulics for VPAT-Blade
Transmission remote pressure taps
Power points, two 12-volt
10-amp/12-volt converter
70-amp alternator
Back-up alarm
Diagnostic connector
Horn
Hour meter
Integrated front lights
Odometer
Coat hook
Cup holder (LH)
Electric armrest
Electronic Monitoring System (EMS III)
Electronic travel speed and gear limiter
Engine air cleaner service indicator in the cab
Engine RPM display/gear display
Foot pegs for slope work
Four gauge cluster
FTC control for Clutch and Brake steering
Hydraulic Pilot Control
Power points, two 12-volt
Pre-start coolant level monitoring system
Product Link ready
Radio ready, 12-volt
Rear view mirror
ROPS, FOPS cab with integrated A/C
Seat belt, retractable 76 mm (3 in)
Storage and literature compartment
Transmission shift points selection function on dash
3126B HEUI Caterpillar diesel engine with 24-volt starter
Air-to-air aftercooler
Auto-dust ejector with under hood air filter and pre-screener
Automatic down-shift and kickdown transmission control
Coolant, extended life
Coolant sampling port
Controlled throttle shifting
Decelerating function
Fan, blower
Fuel/water separator
High efficiency aluminum cooling package
Load compensated shifting
Selectable shift points
Single poly-vee belt with auto belt tensioner
Steering system: Clutch and Brake with FTC
Three-speed planetary transmission with torque converter
Adjuster, hydraulic track
Carrier rollers
Guards, end track-guiding
Heavy-duty sealed and lubricated tracks
Lifetime lubricated track rollers and idlers
Wider tread and taller flange idler profile
4600 meter altitude operation capability without derating
Centralized remote mounted pressure taps for easy access
Crankcase guard
Ecology drains
Extended service intervals (500 hours)
Front pull device
Hinged engine doors
Hinged radiator grille
Implement oil filter
Keyed lockable enclosures
Load sensing hydraulics
Rigid drawbar
SOSSM taps for engine, transmission and implement fluids
Three-valve hydraulics for VPAT-Blade
Transmission remote pressure taps
Pre-start coolant level monitoring system
10-amp/12-volt converter
70-amp alternator
Back-up alarm
Diagnostic connector
Horn
Hour meter
Integrated front lights
Odometer
Coat hook
Cup holder (LH)
Electric armrest
Electronic Monitoring System (EMS III)
Electronic travel speed and gear limiter
Engine air cleaner service indicator in the cab
Engine RPM display/gear display
Foot pegs for slope work
Four gauge cluster
FTC control for Clutch and Brake steering
Hydraulic Pilot Control
Power points, two 12-volt
Pre-start coolant level monitoring system
Product Link ready
Radio ready, 12-volt
Rear view mirror
ROPS, FOPS cab with integrated A/C
Seat belt, retractable 76 mm (3 in)
Storage and literature compartment
Transmission shift points selection function on dash
3126B HEUI Caterpillar diesel engine with 24-volt starter
Air-to-air aftercooler
Auto-dust ejector with under hood air filter and pre-screener
Automatic down-shift and kickdown transmission control
Coolant, extended life
Coolant sampling port
Controlled throttle shifting
Decelerating function
Fan, blower
Fuel/water separator
High efficiency aluminum cooling package
Load compensated shifting
Selectable shift points
Single poly-vee belt with auto belt tensioner
Steering system: Clutch and Brake with FTC
Three-speed planetary transmission with torque converter
Adjuster, hydraulic track
Carrier rollers
Guards, end track-guiding
Heavy-duty sealed and lubricated tracks
Lifetime lubricated track rollers and idlers
Wider tread and taller flange idler profile
4600 meter altitude operation capability without derating
Centralized remote mounted pressure taps for easy access
Crankcase guard
Ecology drains
Extended service intervals (500 hours)
Front pull device
Hinged engine doors
Hinged radiator grille
Implement oil filter
Keyed lockable enclosures
Load sensing hydraulics
Rigid drawbar
SOSSM taps for engine, transmission and implement fluids
Three-valve hydraulics for VPAT-Blade
Transmission remote pressure taps
Product Link ready
10-amp/12-volt converter
70-amp alternator
Back-up alarm
Diagnostic connector
Horn
Hour meter
Integrated front lights
Odometer
Coat hook
Cup holder (LH)
Electric armrest
Electronic Monitoring System (EMS III)
Electronic travel speed and gear limiter
Engine air cleaner service indicator in the cab
Engine RPM display/gear display
Foot pegs for slope work
Four gauge cluster
FTC control for Clutch and Brake steering
Hydraulic Pilot Control
Power points, two 12-volt
Pre-start coolant level monitoring system
Product Link ready
Radio ready, 12-volt
Rear view mirror
ROPS, FOPS cab with integrated A/C
Seat belt, retractable 76 mm (3 in)
Storage and literature compartment
Transmission shift points selection function on dash
3126B HEUI Caterpillar diesel engine with 24-volt starter
Air-to-air aftercooler
Auto-dust ejector with under hood air filter and pre-screener
Automatic down-shift and kickdown transmission control
Coolant, extended life
Coolant sampling port
Controlled throttle shifting
Decelerating function
Fan, blower
Fuel/water separator
High efficiency aluminum cooling package
Load compensated shifting
Selectable shift points
Single poly-vee belt with auto belt tensioner
Steering system: Clutch and Brake with FTC
Three-speed planetary transmission with torque converter
Adjuster, hydraulic track
Carrier rollers
Guards, end track-guiding
Heavy-duty sealed and lubricated tracks
Lifetime lubricated track rollers and idlers
Wider tread and taller flange idler profile
4600 meter altitude operation capability without derating
Centralized remote mounted pressure taps for easy access
Crankcase guard
Ecology drains
Extended service intervals (500 hours)
Front pull device
Hinged engine doors
Hinged radiator grille
Implement oil filter
Keyed lockable enclosures
Load sensing hydraulics
Rigid drawbar
SOSSM taps for engine, transmission and implement fluids
Three-valve hydraulics for VPAT-Blade
Transmission remote pressure taps
Radio ready, 12-volt
10-amp/12-volt converter
70-amp alternator
Back-up alarm
Diagnostic connector
Horn
Hour meter
Integrated front lights
Odometer
Coat hook
Cup holder (LH)
Electric armrest
Electronic Monitoring System (EMS III)
Electronic travel speed and gear limiter
Engine air cleaner service indicator in the cab
Engine RPM display/gear display
Foot pegs for slope work
Four gauge cluster
FTC control for Clutch and Brake steering
Hydraulic Pilot Control
Power points, two 12-volt
Pre-start coolant level monitoring system
Product Link ready
Radio ready, 12-volt
Rear view mirror
ROPS, FOPS cab with integrated A/C
Seat belt, retractable 76 mm (3 in)
Storage and literature compartment
Transmission shift points selection function on dash
3126B HEUI Caterpillar diesel engine with 24-volt starter
Air-to-air aftercooler
Auto-dust ejector with under hood air filter and pre-screener
Automatic down-shift and kickdown transmission control
Coolant, extended life
Coolant sampling port
Controlled throttle shifting
Decelerating function
Fan, blower
Fuel/water separator
High efficiency aluminum cooling package
Load compensated shifting
Selectable shift points
Single poly-vee belt with auto belt tensioner
Steering system: Clutch and Brake with FTC
Three-speed planetary transmission with torque converter
Adjuster, hydraulic track
Carrier rollers
Guards, end track-guiding
Heavy-duty sealed and lubricated tracks
Lifetime lubricated track rollers and idlers
Wider tread and taller flange idler profile
4600 meter altitude operation capability without derating
Centralized remote mounted pressure taps for easy access
Crankcase guard
Ecology drains
Extended service intervals (500 hours)
Front pull device
Hinged engine doors
Hinged radiator grille
Implement oil filter
Keyed lockable enclosures
Load sensing hydraulics
Rigid drawbar
SOSSM taps for engine, transmission and implement fluids
Three-valve hydraulics for VPAT-Blade
Transmission remote pressure taps
Rear view mirror
10-amp/12-volt converter
70-amp alternator
Back-up alarm
Diagnostic connector
Horn
Hour meter
Integrated front lights
Odometer
Coat hook
Cup holder (LH)
Electric armrest
Electronic Monitoring System (EMS III)
Electronic travel speed and gear limiter
Engine air cleaner service indicator in the cab
Engine RPM display/gear display
Foot pegs for slope work
Four gauge cluster
FTC control for Clutch and Brake steering
Hydraulic Pilot Control
Power points, two 12-volt
Pre-start coolant level monitoring system
Product Link ready
Radio ready, 12-volt
Rear view mirror
ROPS, FOPS cab with integrated A/C
Seat belt, retractable 76 mm (3 in)
Storage and literature compartment
Transmission shift points selection function on dash
3126B HEUI Caterpillar diesel engine with 24-volt starter
Air-to-air aftercooler
Auto-dust ejector with under hood air filter and pre-screener
Automatic down-shift and kickdown transmission control
Coolant, extended life
Coolant sampling port
Controlled throttle shifting
Decelerating function
Fan, blower
Fuel/water separator
High efficiency aluminum cooling package
Load compensated shifting
Selectable shift points
Single poly-vee belt with auto belt tensioner
Steering system: Clutch and Brake with FTC
Three-speed planetary transmission with torque converter
Adjuster, hydraulic track
Carrier rollers
Guards, end track-guiding
Heavy-duty sealed and lubricated tracks
Lifetime lubricated track rollers and idlers
Wider tread and taller flange idler profile
4600 meter altitude operation capability without derating
Centralized remote mounted pressure taps for easy access
Crankcase guard
Ecology drains
Extended service intervals (500 hours)
Front pull device
Hinged engine doors
Hinged radiator grille
Implement oil filter
Keyed lockable enclosures
Load sensing hydraulics
Rigid drawbar
SOSSM taps for engine, transmission and implement fluids
Three-valve hydraulics for VPAT-Blade
Transmission remote pressure taps
ROPS, FOPS cab with integrated A/C
10-amp/12-volt converter
70-amp alternator
Back-up alarm
Diagnostic connector
Horn
Hour meter
Integrated front lights
Odometer
Coat hook
Cup holder (LH)
Electric armrest
Electronic Monitoring System (EMS III)
Electronic travel speed and gear limiter
Engine air cleaner service indicator in the cab
Engine RPM display/gear display
Foot pegs for slope work
Four gauge cluster
FTC control for Clutch and Brake steering
Hydraulic Pilot Control
Power points, two 12-volt
Pre-start coolant level monitoring system
Product Link ready
Radio ready, 12-volt
Rear view mirror
ROPS, FOPS cab with integrated A/C
Seat belt, retractable 76 mm (3 in)
Storage and literature compartment
Transmission shift points selection function on dash
3126B HEUI Caterpillar diesel engine with 24-volt starter
Air-to-air aftercooler
Auto-dust ejector with under hood air filter and pre-screener
Automatic down-shift and kickdown transmission control
Coolant, extended life
Coolant sampling port
Controlled throttle shifting
Decelerating function
Fan, blower
Fuel/water separator
High efficiency aluminum cooling package
Load compensated shifting
Selectable shift points
Single poly-vee belt with auto belt tensioner
Steering system: Clutch and Brake with FTC
Three-speed planetary transmission with torque converter
Adjuster, hydraulic track
Carrier rollers
Guards, end track-guiding
Heavy-duty sealed and lubricated tracks
Lifetime lubricated track rollers and idlers
Wider tread and taller flange idler profile
4600 meter altitude operation capability without derating
Centralized remote mounted pressure taps for easy access
Crankcase guard
Ecology drains
Extended service intervals (500 hours)
Front pull device
Hinged engine doors
Hinged radiator grille
Implement oil filter
Keyed lockable enclosures
Load sensing hydraulics
Rigid drawbar
SOSSM taps for engine, transmission and implement fluids
Three-valve hydraulics for VPAT-Blade
Transmission remote pressure taps
Seat belt, retractable 76 mm (3 in)
10-amp/12-volt converter
70-amp alternator
Back-up alarm
Diagnostic connector
Horn
Hour meter
Integrated front lights
Odometer
Coat hook
Cup holder (LH)
Electric armrest
Electronic Monitoring System (EMS III)
Electronic travel speed and gear limiter
Engine air cleaner service indicator in the cab
Engine RPM display/gear display
Foot pegs for slope work
Four gauge cluster
FTC control for Clutch and Brake steering
Hydraulic Pilot Control
Power points, two 12-volt
Pre-start coolant level monitoring system
Product Link ready
Radio ready, 12-volt
Rear view mirror
ROPS, FOPS cab with integrated A/C
Seat belt, retractable 76 mm (3 in)
Storage and literature compartment
Transmission shift points selection function on dash
3126B HEUI Caterpillar diesel engine with 24-volt starter
Air-to-air aftercooler
Auto-dust ejector with under hood air filter and pre-screener
Automatic down-shift and kickdown transmission control
Coolant, extended life
Coolant sampling port
Controlled throttle shifting
Decelerating function
Fan, blower
Fuel/water separator
High efficiency aluminum cooling package
Load compensated shifting
Selectable shift points
Single poly-vee belt with auto belt tensioner
Steering system: Clutch and Brake with FTC
Three-speed planetary transmission with torque converter
Adjuster, hydraulic track
Carrier rollers
Guards, end track-guiding
Heavy-duty sealed and lubricated tracks
Lifetime lubricated track rollers and idlers
Wider tread and taller flange idler profile
4600 meter altitude operation capability without derating
Centralized remote mounted pressure taps for easy access
Crankcase guard
Ecology drains
Extended service intervals (500 hours)
Front pull device
Hinged engine doors
Hinged radiator grille
Implement oil filter
Keyed lockable enclosures
Load sensing hydraulics
Rigid drawbar
SOSSM taps for engine, transmission and implement fluids
Three-valve hydraulics for VPAT-Blade
Transmission remote pressure taps
Storage and literature compartment
10-amp/12-volt converter
70-amp alternator
Back-up alarm
Diagnostic connector
Horn
Hour meter
Integrated front lights
Odometer
Coat hook
Cup holder (LH)
Electric armrest
Electronic Monitoring System (EMS III)
Electronic travel speed and gear limiter
Engine air cleaner service indicator in the cab
Engine RPM display/gear display
Foot pegs for slope work
Four gauge cluster
FTC control for Clutch and Brake steering
Hydraulic Pilot Control
Power points, two 12-volt
Pre-start coolant level monitoring system
Product Link ready
Radio ready, 12-volt
Rear view mirror
ROPS, FOPS cab with integrated A/C
Seat belt, retractable 76 mm (3 in)
Storage and literature compartment
Transmission shift points selection function on dash
3126B HEUI Caterpillar diesel engine with 24-volt starter
Air-to-air aftercooler
Auto-dust ejector with under hood air filter and pre-screener
Automatic down-shift and kickdown transmission control
Coolant, extended life
Coolant sampling port
Controlled throttle shifting
Decelerating function
Fan, blower
Fuel/water separator
High efficiency aluminum cooling package
Load compensated shifting
Selectable shift points
Single poly-vee belt with auto belt tensioner
Steering system: Clutch and Brake with FTC
Three-speed planetary transmission with torque converter
Adjuster, hydraulic track
Carrier rollers
Guards, end track-guiding
Heavy-duty sealed and lubricated tracks
Lifetime lubricated track rollers and idlers
Wider tread and taller flange idler profile
4600 meter altitude operation capability without derating
Centralized remote mounted pressure taps for easy access
Crankcase guard
Ecology drains
Extended service intervals (500 hours)
Front pull device
Hinged engine doors
Hinged radiator grille
Implement oil filter
Keyed lockable enclosures
Load sensing hydraulics
Rigid drawbar
SOSSM taps for engine, transmission and implement fluids
Three-valve hydraulics for VPAT-Blade
Transmission remote pressure taps
Transmission shift points selection function on dash
10-amp/12-volt converter
70-amp alternator
Back-up alarm
Diagnostic connector
Horn
Hour meter
Integrated front lights
Odometer
Coat hook
Cup holder (LH)
Electric armrest
Electronic Monitoring System (EMS III)
Electronic travel speed and gear limiter
Engine air cleaner service indicator in the cab
Engine RPM display/gear display
Foot pegs for slope work
Four gauge cluster
FTC control for Clutch and Brake steering
Hydraulic Pilot Control
Power points, two 12-volt
Pre-start coolant level monitoring system
Product Link ready
Radio ready, 12-volt
Rear view mirror
ROPS, FOPS cab with integrated A/C
Seat belt, retractable 76 mm (3 in)
Storage and literature compartment
Transmission shift points selection function on dash
3126B HEUI Caterpillar diesel engine with 24-volt starter
Air-to-air aftercooler
Auto-dust ejector with under hood air filter and pre-screener
Automatic down-shift and kickdown transmission control
Coolant, extended life
Coolant sampling port
Controlled throttle shifting
Decelerating function
Fan, blower
Fuel/water separator
High efficiency aluminum cooling package
Load compensated shifting
Selectable shift points
Single poly-vee belt with auto belt tensioner
Steering system: Clutch and Brake with FTC
Three-speed planetary transmission with torque converter
Adjuster, hydraulic track
Carrier rollers
Guards, end track-guiding
Heavy-duty sealed and lubricated tracks
Lifetime lubricated track rollers and idlers
Wider tread and taller flange idler profile
4600 meter altitude operation capability without derating
Centralized remote mounted pressure taps for easy access
Crankcase guard
Ecology drains
Extended service intervals (500 hours)
Front pull device
Hinged engine doors
Hinged radiator grille
Implement oil filter
Keyed lockable enclosures
Load sensing hydraulics
Rigid drawbar
SOSSM taps for engine, transmission and implement fluids
Three-valve hydraulics for VPAT-Blade
Transmission remote pressure taps
POWER TRAIN
3126B HEUI Caterpillar diesel engine with 24-volt starter
Air-to-air aftercooler
Auto-dust ejector with under hood air filter and pre-screener
Automatic down-shift and kickdown transmission control
Coolant, extended life
Coolant sampling port
Controlled throttle shifting
Decelerating function
Fan, blower
Fuel/water separator
High efficiency aluminum cooling package
Load compensated shifting
Selectable shift points
Single poly-vee belt with auto belt tensioner
Steering system: Clutch and Brake with FTC
Three-speed planetary transmission with torque converter
UNDERCARRIAGE
Adjuster, hydraulic track
Carrier rollers
Guards, end track-guiding
Heavy-duty sealed and lubricated tracks
Lifetime lubricated track rollers and idlers
Wider tread and taller flange idler profile
OTHER STANDARD EQUIPMENT
4600 meter altitude operation capability without derating
Centralized remote mounted pressure taps for easy access
Crankcase guard
Ecology drains
Extended service intervals (500 hours)
Front pull device
Hinged engine doors
Hinged radiator grille
Implement oil filter
Keyed lockable enclosures
Load sensing hydraulics
Rigid drawbar
SOSSM taps for engine, transmission and implement fluids
Three-valve hydraulics for VPAT-Blade
Transmission remote pressure taps
ELECTRICAL
10-amp/12-volt converter
70-amp alternator
Back-up alarm
Diagnostic connector
Horn
Hour meter
Integrated front lights
Odometer
OPERATOR ENVIRONMENT
Coat hook
Cup holder (LH)
Electric armrest
Electronic Monitoring System (EMS III)
Electronic travel speed and gear limiter
Engine air cleaner service indicator in the cab
Engine RPM display/gear display
Foot pegs for slope work
Four gauge cluster
FTC control for Clutch and Brake steering
Hydraulic Pilot Control
Power points, two 12-volt
Pre-start coolant level monitoring system
Product Link ready
Radio ready, 12-volt
Rear view mirror
ROPS, FOPS cab with integrated A/C
Seat belt, retractable 76 mm (3 in)
Storage and literature compartment
Transmission shift points selection function on dash
POWER TRAIN
3126B HEUI Caterpillar diesel engine with 24-volt starter
Air-to-air aftercooler
Auto-dust ejector with under hood air filter and pre-screener
Automatic down-shift and kickdown transmission control
Coolant, extended life
Coolant sampling port
Controlled throttle shifting
Decelerating function
Fan, blower
Fuel/water separator
High efficiency aluminum cooling package
Load compensated shifting
Selectable shift points
Single poly-vee belt with auto belt tensioner
Steering system: Clutch and Brake with FTC
Three-speed planetary transmission with torque converter
UNDERCARRIAGE
Adjuster, hydraulic track
Carrier rollers
Guards, end track-guiding
Heavy-duty sealed and lubricated tracks
Lifetime lubricated track rollers and idlers
Wider tread and taller flange idler profile
OTHER STANDARD EQUIPMENT
4600 meter altitude operation capability without derating
Centralized remote mounted pressure taps for easy access
Crankcase guard
Ecology drains
Extended service intervals (500 hours)
Front pull device
Hinged engine doors
Hinged radiator grille
Implement oil filter
Keyed lockable enclosures
Load sensing hydraulics
Rigid drawbar
SOSSM taps for engine, transmission and implement fluids
Three-valve hydraulics for VPAT-Blade
Transmission remote pressure taps
Air conditioner less off
Alternator, brushless
ARO (Laser/GPS)
Bulldozer- See Bulldozer Specifications chart for weights
Canopy
Heater, dash mounted for OROPS
Fan, reversible
Fan Group demand
Fast fill fuel tank
Lighting system, 4 lights
Product Link
Machine Security System (MSS)
Rotating beacon
Sound suppression (for cab)
Guards:
Crankcase, heavy duty
Fuel tank (for cab or canopy)
Guard, rear, heavy duty
Guiding Track XL/MS
Guiding Track LGP/MS
Guiding Guarding Track XL/HD
Guiding Guarding Track LGP/HD
Radiator, heavy duty, hinged grill
Sand blast grid
Screens and Sweeps:
Rear screen for EROPS cab
Rear screen for OROPS canopy
Sun screen
Sweeps EROPS
Sweeps OROPS
Hydraulics and Ripper:
Four valve for 5VPAT blade and ripper (valve itself)
Ripper, radial (with three curved teeth)
Each optional straight tooth, replacing curved tooth
Four valve for 5VPAT blade and ripper (valve itself)
Ripper, radial (with three curved teeth)
Each optional straight tooth, replacing curved tooth
Seat:
Air suspended C500 comfort series, cloth (for cab only)
C500 comfort series, cloth, mechanical suspended ( for cab only)
C500 comfort series, vinyl, mechanical suspended
Low back, vinyl
Starting aids:
Engine coolant heater (dealer installed)
Heavy-duty batteries
Electric fuel priming pump
Engine coolant heater (dealer installed)
Heavy-duty batteries
Electric fuel priming pump
Track,pair,heavy-duty sealed and lubricated:
XL arrangement, 41-sections:
LGP arrangement, 44-sections:
SystemOne Undercarriage:
XL
LGP
XL
LGP
Track,pair,SystemOne:
XL arrangement, 41-sections:
LGP arrangement, 44-sections:
XL arrangement, 41-sections:
LGP arrangement, 44-sections:
Winch and fairleads:
Winch, standard speed
Winch, low speed
Fairlead, 3 rollers
Fairlead, 4 rollers