Engine Model | C9 ACERT |
Flywheel Power | 138 kW |
Gross Power | 213 HP |
Net Power - ISO 9249 | 185 HP |
Bore | 112 mm |
Stroke | 149 mm |
Displacement | 8.8 l |
Engine Model | C9 ACERT |
1.0 Forward | 3.8 km/h |
2.0 Forward | 6.6 km/h |
3.0 Forward | 11.5 km/h |
1.0 Reverse | 4.8 km/h |
2.0 Reverse | 8.4 km/h |
3.0 Reverse | 14.6 km/h |
Fuel Tank | 424 l |
Cooling System | 76.8 l |
Engine Crankcase | 28 l |
Power Train | 145.7 l |
Final Drive - Each | 13.6 l |
Roller Frames - Each | 24.6 l |
Pivot Shaft Compartment | 1.9 l |
Hydraulic Tank | 51.5 l |
Operating Weight | 18669 kg |
Shipping Weight - XW A | 17364 kg |
Operating Weight - LGP S | 21715 kg |
Length - Track on Ground | 2664 mm |
Ground Clearance | 383 mm |
Track Gauge | 1880 mm² |
Height | 3143 mm |
Shoes/Side | 41 |
Shoes/Side - LGP | 45 |
Grouser Height | 65 mm² |
Pitch | 203 mm² |
Ground Clearance | 381 mm |
Track Gauge - LGP | 2286 mm |
Ground Contact Area | 4.36 m² |
Tilt Cylinder Flow | 80 l/min |
Ripper Cylinder Flow | 160 l/min |
Blade Type | A |
XL VPAT - Blade Capacity | 4.73 m³ |
XW SU - Blade Width | 3556 mm² |
XW A - Blade Capacity | 4.3 m³ |
Weight - With One Shank | 1634 kg |
Type | Fixed Parallelogram |
Number of Pockets | 3 |
Overall Beam Width | 2202 mm |
Beam Cross Section | 216 x 254 mm 8.5 x 10 in |
Maximum Clearance Raised - Under Tip, Pinned in Bottom Hole | 511 mm² |
Maximum Penetration | 500 mm |
Maximum Penetration Force | 6603 kN |
Pry-Out Force | 9134 kg |
Weight - Each Additional Shank | 74 kg |
Winch Model | PA 56 |
Oil Capacity | 67 l |
Increased Tractor Length - LGP | 397 mm² |
Drum Diameter | 254 mm |
Drum Width | 330 mm |
Flange Diameter | 504 mm² |
Ferrule Size (O.D. × Length) | 54 x 67 mm 2.10 x 2.63 in |
ROPS/FOPS | ROPS meets criteria SAE J395, SAE 1040 MAY 94, ISO 3471-1994/FOPS meets ISO 3449-1992 Level II |
Cab | Meets appropriate standards as listed below. |
Brakes | Brakes meet criterion SAE J/ISO 10265 MAR99 |