Engine

Engine Model	Cat® C32 ACERT™
Flywheel Power	634 kW
Bore	145 mm
Stroke	162 mm
Displacement	32.1 l
Engine Power - Net SAE J1349/ISO 9249	850 hp
Engine Power - ISO 14396	692 kW
Engine Power - Gross SAE J1995*	695 kW
Net SAE J1349/ISO 9249	634 kW
Emissions	Tier 2 Equivalent
Note (2)	Engine ratings apply at 1,800 rpm.
Note (1)	* Excludes all fan losses.
Note (4)	No derating required up to 3658 m (12,000 ft) altitude. High altitude attachment available for greater than 3658 m (12,000 ft).
Note (3)	Net power advertised is the power available at the flywheel when the engine is equipped with air cleaner, muffler, alternator, fan, and engine emissions controls as required.

Weights

Operating Weight	104236 kg
Shipping Weight	37485 kg
Operating Weight - CD	112718 kg
Shipping Weight - CD	37802 kg
Note (4)	D11T CD Shipping Weight: Base machine chassis with cab and pivot shaft. Doesn't include ROPS, ripper, blade, track, or roller frames.
Note (1)	D11T Operating Weight: Includes blade tilt cylinders, coolant, lubricants, full fuel tank, ROPS, FOPS cab, 11U ABR bulldozer, single-shank ripper with pin-puller, fast fuel, 710 mm (28 in) ES shoes, and operator.
Note (3)	D11T CD Operating Weight: Includes lubricant, coolant, full fuel tank, 915 mm (36 in) extreme service shoes, 11 Carrydozer, single-shank ripper, and operator.
Note (2)	D11T Shipping Weight: Base machine chassis with cab and pivot shaft. Doesn't include ROPS, ripper, blade, track, or roller frames.

Transmission

1 Forward	3.9 km/h
2 Forward	6.8 km/h
3 Forward	11.8 km/h
1 Reverse	4.7 km/h
2 Reverse	8.2 km/h
3 Reverse	14 km/h
Type	Planetary powershift
Transmission Clutch Diameter	533 mm

Hydraulic Controls

D11T - Combined Pump Output - Implement	620 l/min
D11T - Tilt Pump Flow	155 l/min
D11T CD - Ripper (Lift) Relief Valve Setting	24135 kPa
D11T CD - Tilt Cylinder Flow	250 l/min
D11T CD - Tilt Cylinder Relief Valve Setting	24825 kPa
D11T - Ripper (Pitch) Relief Valve Setting	22750 kPa
D11T CD - Carrydozer Relief Valve Setting	24135 kPa
D11T CD - Ripper (Pitch) Relief Valve Setting	24135 kPa
D11T CD - Pump Output - Implement	670 l/min
D11T - Bulldozer Relief Valve Setting	22750 kPa
D11T - Tilt Cylinder Relief Valve Setting	24300 kPa
D11T - Ripper (Lift) Relief Valve Setting	22750 kPa
D11T - Pump Type	Gear-type pump
D11T CD - Pump Type	Gear-type pump
Note (2)	Electro-hydraulic pilot valves assist operations of ripper and dozer controls.
Note (3)	Complete system consists of pump, tank with filter, oil cooler, valves, lines, and control levers.
Note (1)	Pump output measured at 1,800 engine rpm and 6895 kPa (1,000 psi).

Undercarriage

Shoe Type	Extreme Service
Width - Shoe	710 mm
Shoes/Side	41
Grouser Height	102 mm
Pitch	318 mm
Track Gauge	2896 mm
Length - Track on Ground	4444 mm
Ground Contact Area	6.3 m²
Track Rollers/Side	8
Number of Carrier Rollers	1 per side (optional)
Ground Contact Area - CD	8.1 m²
Width - Shoe - CD	915 mm
Ground Clearance*	777 mm
Note (2)	Sleeve Bearing Track with Positive Pin Retention.
Note (1)	* Includes grouser height for total dimensions on hard surface.

Service Refill Capacities

Fuel Tank	1609 l
Cooling System	269 l
Engine Crankcase*	103 l
Power Train	344 l
Final Drive - Each	47 l
Roller Frames - Each	94 l
Pivot Shaft Compartment	71 l
Implement Hydraulic System - Tank Only	223 l
Fuel Tank - High Capacity	1911 l
Note	* With oil filters.
Fuel Tank - Platform Ready	1778 l

Track Roller Frame

Oscillation

351 mm

Steering and Brakes

Spring Applied Multiple-disc Brake	612 mm
Hydraulically Applied Multiple-disc Steering Clutch	440 mm

Standards

FOPS	Falling Objects Protective Structure (FOPS) meets the following criteria: ISO 3449:2005 LEVEL II.
ROPS	Rollover Protective Structure (ROPS) meets the following criteria: SAE J1040 MAY94, ISO 3471:1994.
Sound (1)	The operator Equivalent Sound Pressure Level (Leq) is 79 dB(A) when ISO 6396:2008 is used to measure the value for an enclosed cab. This is a dynamic cycle sound exposure level. The cab was properly installed and maintained. The test was conducted with the cab doors and the cab windows closed.
Sound (2)	The exterior sound pressure level for the standard machine measured at a distance of 15 m (49.2 ft) according to the test procedures specified in SAE J88 APR95, mid-gear-moving operation, is 87 dB(A).

Dimensions (Approximate) - D11T

Length - With SU-Blade	8579 mm
Height - FOPS Cab*	4405 mm
Width - Without Trunnions - Standard Shoe	3782 mm
Length - Track on Ground	4444 mm
Length - With Single-Shank Ripper	8107 mm
Track Gauge	2896 mm
Note (1)	*Includes grouser height for total dimensions on hard surfaces.
Overall Length - Basic Tractor	6160 mm
Width - Over Trunnions	4379 mm
Drawbar Height (Center of Clevis)*	942 mm
Height - Top of Stack*	4549 mm
Length - With U-Blade	8641 mm
Length - With Multi-Shank Ripper	8427 mm
Ground Clearance*	798 mm
Length - Basic Tractor - With Drawbar	6160 mm
Overall Length - SU-Blade/SS Ripper	10525 mm
Height - ROPS/Canopy*	4723 mm
Note (2)	D11T shown equipped with 710 mm (28 in) shoes.

Dimensions (Approximate) - D11T CD

Track Gauge	2896 mm
Width - Over Trunnions	4379 mm
Note (2)	**CD Blade on D11T CD.
Overall Length - SU-Blade/SS Ripper**	10712 mm
Length - Track on Ground	4444 mm
Note (3)	D11T shown equipped with 710 mm (28 in) shoes.
Overall Length - Basic Tractor	6160 mm
Length - Basic Tractor - With Drawbar	6160 mm
Drawbar Height (Center of Clevis)*	942 mm
Height - Top of Stack*	4549 mm
Length - With Multi-Shank Ripper	8427 mm
Height - FOPS Cab*	4405 mm
Ground Clearance*	798 mm
Length - With SU-Blade**	8765 mm
Height - ROPS/Canopy*	4723 mm
Length - With Single-Shank Ripper	8107 mm
Note (1)	*Includes grouser height for total dimensions on hard surfaces.
Width - Without Trunnions - Standard Shoe	3806 mm

Structures

Engineered for maximum production and service life.

Mainframe Strength

Helping you get more done with maximum availability, the durable design of the mainframe makes repair and maintenance easy. The D11T/D11T CD mainframes are built to absorb high impact shock loads and twisting forces during severe dozing and ripping applications. It is not uncommon to see these machines rebuilt several times using the same frame, with only minor welding.

• Frame rails have a full box section design which keeps components rigidly aligned.
• The main case, equalizer bar saddle, and front cross member are heavy duty steel castings incorporated into highly loaded areas of the mainframe to improve stress distribution for improved durability.
• Top and bottom rails are made from continuous rolled sections which provide superior mainframe durability.
• The main case elevates the final drives well above the ground level work area to protect them from impact loads, abrasion and contaminants.
• The pivot shaft and pinned equalizer bar maintain track roller frame alignment and allow the roller frame to oscillate for smoother ride.
• Heavy cast saddle has a ribbed design which increases frame life.
• Tag-link blade mounting brings the blade closer to the machine for excellent maneuverability, machine balance and blade penetration.

Equalizer Bar End Pins

Proper grease lubrication on working surfaces can significantly extend component life and help lower maintenance cost.

• The remote lubrication for the D11T/D11T CD is performed from a service point conveniently located on the left hand fender and allows an operator or service technician to lubricate both the left-hand and right-hand equalizer bar end pin bearings and pins from one service point.
• Adding the optional autolube system allows the operator to tailor the amount of grease needed for each application by volume and service interval.

Carrydozer Frame

The Carrydozer frame is specifically designed to accept the additional frame loads generated by the unique Carrydozer blade design.

Engine

Power and reliability to help you move more.

C32 with ACERT Technology

The Cat C32 engine with ACERT Technology delivers power and reliability, ensuring top performance, high productivity, and exceptional service life.

• The C32 ACERT engine performs at full rated net power of 634 kW (850 hp) at 1,800 rpm with a high torque rise of 21 percent, allowing the D11T to doze through tough material.
• Matched with a high efficiency torque divider and electronically controlled power shift transmission, it will provide years of dependable service.

ADEM™ A4 Engine Controller

The ADEM A4 electronic control module manages fuel delivery and air flow to get the best performance per liter (gallon) of fuel used.

Air-to-Air Aftercooling

Air-to-air aftercooling on the D11T/D11T CD cools hot, compressed air coming out of the turbocharger providing cooler and denser air into the air intake system. Bringing more cool air into the engine increases power generation, lowers emissions, and improves fuel efficiency.

Service

Engine enclosures provide easy access to maintenance points within the engine compartment. Easier maintenance and repair is available through monitoring of key functions and logging of critical indicators.

Emissions Technology

Providing you reliable, integrated solutions.

The D11T/D11T CD’s C32 engine with ACERT Technology will be capable of achieving levels equivalent to Tier 2 equivalent emission standards for lesser or non-regulated countries.

Cooling System

Superior cooling keeps you moving in the most demanding work conditions.

The hydraulic variable demand fan provides engine cooling capability that is matched to the ambient conditions. In cooler conditions, the fan turns at a slower speed consuming only the power required to cool the tractor systems, providing more power to the tracks to help you lower your cost per unit of material moved.

Aluminum Bar Plate Radiator

The cooling system uses a two-part radiator built with rugged, highly efficient aluminum bar plate cores. The aluminum bar plate construction aids durability and allows for higher heat transfer and superior corrosion resistance. It is only available on D11’s with Tier 2 equivalent emission standards.

Mesabi Radiator

Copper cores improve cooling efficiency making the Mesabi radiator a good choice for high ambient temperature environments and heavy debris applications. The cooling tubes are oriented to allow open passages for dirt and debris to blow through the core. It is optional on Tier 2 equivalent configurations.

Hydraulic Oil to Air Cooler

The new hydraulic oil to air cooler reduces hydraulic oil temperatures improving component durability and reliability.

Attachments

• Reversible cooling fan
• Mesabi radiator for lesser or non regulated countries with Tier 2 equivalent emission standards

Power Train

Power and control to efficiently move your material.

Torque Divider

The Cat D11T/D11T CD use a torque divider between the engine and the transmission to act as the hydrodynamic component, reducing the possibility of damage to the power train by dampening impact loads and vibrations.

• A single-stage torque converter with output torque divider sends 75 percent of engine torque through the converter and 25 percent through a direct drive shaft for greater driveline efficiency, higher torque multiplication, and ease of operation.

Planetary Powershift Transmission

Three speeds forward and three speeds reverse, utilizing large diameter, high-capacity, oil-cooled clutches.

• Modulation system permits smooth speed and direction changes.
• Modular transmission and bevel gear slide into rear case for easy servicing, even with ripper installed.
• Oil-to-water cooler for maximum cooling capacity.
• Forced oil flow lubricates and cools clutch packs to provide maximum clutch life.
• Controlled throttle shifting regulates engine speed during directional shifts for smoother operation and longer component life.

Steering Clutch and Brake

Fade resistant and adjustment free. The multi-disc, oil cooled steering clutches are hydraulically applied and electronically controlled. The brakes are applied by springs and hydraulically released for safe and reliable braking performance. Steering clutches, brakes and final drives can be removed as a unit from each side of the tractor.

Undercarriage

Designed for optimized machine balance and performance at your site.

The elevated sprocket and suspended undercarriage work together, increasing traction and giving the operator a smoother ride. These benefits translate into higher production and longer component life. This design transfers implement shock loads to the mainframe, so final drives, axles, and steering components are isolated from harsh impact loads commonly seen in large track-type tractor applications.

• Bogie suspension allows the track to conform to ground condition, providing up to 15% more ground contact, especially in hard, uneven terrain. Higher traction means less slippage, better balance, and a smoother ride.
• Integrated carrier roller mount is fabricated into the track roller frame making it easy to add the optional carrier roller in the field.
• Rollers and idlers feature symmetric Duo-Cone™ seals for long sealing life to prevent oil loss and dirt entry.
• Roller frames are tubular to resist bending and twisting, with added reinforcement.
• Sleeve bearing track is a unique track link assembly that maximizes life and minimizes downtime. It is designed to operate at higher speeds and greater loads.
• Sprocket segments have four bolt-on replaceable rim segments of abrasion resistant tough steel for long wear life.
• Track master link with single tooth and coarse thread bolts provide superior reliability and durability.

Operator Station

Designed for your comfort, convenience, and productivity.

The D11T/D11T CD cab provides ergonomic controls, intuitive monitoring systems, and enhanced visibility. All of these features provide the D11T and D11T CD an industry leading operator environment that helps contribute to high levels of productivity, efficiency, and comfort.

• The operator station offers an exceptional viewing area. The tapered hood, notched fuel tank, and narrow ripper carriage give the operator a clear line of sight to front and rear work areas.
• The automatic climate control system automatically adjusts heating and air conditioning controls to maintain a consistent cab temperature throughout the day.
• The Cat Optimized Seat has a six way adjustment control for optimal support and comfort. Seat side bolsters restrain side?to-side movement, especially when working on side slopes.
• The combination dash mounted instrument cluster and the right console mounted Advisor Monitoring System display key machine operating information and give operators and service technicians insight into the machine’s operation and maintenance needs.
• Slope and Side Slope Monitor is standard allowing operator to understand terrain better to improve dozing performance.

Additional features include:

• Entertainment radio ready and IPOD/MP3 player ready.
• Communications radio mounting.
• Power plug-in on the right side console (12-volt laptop and wireless phone compatible).
• Finishes that make the cab easy to clean.
• Optional heated and ventilated seat.

Implement and Steering Controls

The Finger Tip Controls (FTC) require less effort and are more comfortable for long periods of operation. Electronic controls eliminate direct mechanical connections to the power train, resulting in reduced noise and vibration inside the cab.

Low effort and comfortable to grip, the electronic dozer joystick gives the operator control of all dozer functions with the right hand.

A rigidly mounted handgrip on the electronic ripper control provides firm support for the operator even when ripping in the roughest terrain. Low effort thumb lever controls raising and lowering.

Integrated Technologies

Monitor, manage, and enhance job site operations.

The D11T electronic systems have been completely integrated to function as one machine. This integration creates a smart machine and more informed operator maximizing the productivity of both.

• VIMS™ 3G – This system gathers historical trends, histograms, events and more through a wired connection for off-board analysis in applications such as VIMS PC.
• Automated Blade Assist (ABA) – Increases efficiency while reducing operator workload. ABA makes use of preset blade pitch positions. ABA is standard on the D11T/D11T CD.
• Enhanced Auto Shift (EAS) – EAS improves fuel efficiency by automatically selecting the optimal reverse gear and engine speed combination based upon power train load and desired ground speed.
• Advisor Monitoring System (AMS) – AMS is used to monitor and display operating characteristics, diagnostics and events, system operational totals, and modes of operation. It is also used to view and change operator preferences and parameters. AMS benefits both the operator and service technician to improve productivity and lower operating costs.
• AutoCarry™ (optional) – Provides automatic blade control during the carry segment of the dozing cycle by measuring ground speed and track slip with a robust Global Navigation Satellite System (GNSS) chassis mounted receiver. Blade position is changed automatically to keep slip at optimum level for best performance. It is intended to enhance the operator’s productivity in high production earthmoving applications with carry distances over 30.5 m (100 ft).
• Automatic Ripper Control (optional) – Helps to reduce operator fatigue and decreases wear and tear on the machine. This is done by monitoring the tractor speed with the new ROPS mounted GNSS to automatically adjust engine speed and ripper depth to minimize track slip.
• Cat Product Link™ (optional) – Product Link enables the remote transmission of information about the location, operation, and condition of your equipment. Efficiently and effectively monitor performance of your assets to help keep your jobs on schedule, maintain equipment condition, and reduce the costs of owning and operating your fleet.

Cat MineStar

Configurable to suit your operation’s needs.

Cat MineStar helps you manage everything from material tracking to sophisticated real-time fleet management, machine health systems, autonomous equipment systems and more. The capability sets: Fleet, Terrain, Detect, Health and Command can be used in combination or individually to allow your operation the flexibility and scalability it needs to be more productive, efficient and safe.

• Fleet (optional) gives mines a comprehensive overview of all operations with real-time machine tracking, assignment and productivity management.
• Terrain for Grading (optional) is a state-of-the art machine guidance system that delivers real-time productivity information to operators of mine site grading equipment. Terrain features an in-cab display, satellite navigation technology, machine-mounted components and fully integrated office software.
• Detect (optional) enhances operators’ awareness of the environment around their equipment, helping alleviate potential safety hazards and increasing operator confidence.
• Health (optional) delivers critical event-based machine condition and operating data for your entire fleet, helping mines identify potential equipment problems long before failure.
• Command for Dozing (optional) removes the operator from the cab of the machine and enables remote control operation. – An over-the-shoulder operator console provides line-of-sight remote control operation. – A comfortable remote operator station offers both line-of-sight and non-line-of-sight remote control.

For more information visit cat.com/mining.

Safety

Focused on keeping you safe.

Safety is Caterpillar’s top priority. We constantly enhance product design and engineering to support customer safety goals and create safe working environments.

Operator Not Present Monitoring System

This feature locks out the power train and hydraulics under certain conditions to prevent unintentional movement when the operator is not in the seat.

Heavy Duty Steps and Handles

Strategically placed grab handles plus non-slip steps and decking aid operator getting on and off the machine.

Fender Guard Rails

Standard heavy duty guard rails are strategically placed to safeguard the operator outside of the cab.

Spectator Sound Reduction

The D11T offers three options to control operator and spectator sound levels. Options include:

• Sound reducing idlers and sprocket segments.
• Full set of sealed bottom guards.
• Solid engine compartment enclosures and insulation.

When all three options are ordered, the D11T sound suppression package can deliver a 6 dB(A) (ISO 6395) reduction in the average spectator sound power level and a 4 dB(A) (ISO 6396) reduction in the average operator sound pressure level.

Anchorage Points

Anchorage points provide your people with a positioning system to preform repairs and maintenance. The D11T/D11T CD consist of fourteen (14) total anchorage points.

• Four (4) on lift cylinder spray shields
• Four (4) on top surface of hood
• Two (2) on front top of cab
• Four (4) on ROPS structure

Two Step Dozer Lift Cylinder Access Platform with Guard Rails

This feature provides access to the lift cylinders for cleaning or repairing the mounted mirrors and lights.

Powered Access System (optional)

The Cat powered access system provides excellent access and egress to and from the cab on the D11T/D11T CD, allowing easy access even in wet or freezing conditions.

• Operates off of power train hydraulic system.
• Rails on both sides of the ladder provide three-point contact.
• Warning alarms will sound if parking brake is released with ladder down or if the blade is raised with the ladder down.

Rear Platform and Guard Rails (optional)

The platform provides access to the rear window for cleaning and repairing rear mounted lights. The walkway is a modular design so varying lengths can be used across the back of the tractor to meet unique customer needs.

• Can be installed on 1911 L (505 gal) or 1778 L (470 gal) fuel tank.

Work Tools

Provide flexibility to match the machine to your job.

Bulldozers

All blades feature a strong box-section design that resists twisting and cracking. Blades are made of high tensile strength steel that stands up to the most demanding applications. Heavy moldboard construction and hardened bolt-on cutting edges and end bits add strength and durability.

• High-Capacity Universal Blade – Offers optimal capacity for moving big loads over long distances.
• Semi-Universal Blade – Built for tough applications where penetration is important.
• Dual Tilt – Allows the operator to optimize blade pitch angle.
• Cutting Edges and End Bits – Cutting edges are made of DH?2™ steel. End bits are made of DH-3™ steel for maximum service life in tough materials.
• Specialty blades, (coal blades and reclamation blades) are available from Cat Work Tools for applications requiring higher capacity blades for light materials.

Rippers

Rippers are made to penetrate tough material fast and rip thoroughly for use in a variety of materials.

• Single-Shank Ripper – Built for tough ripping conditions and greater ripping depth. Operator can adjust the shank depth from the seat using a single-shank pin puller. Large one-piece shank is available in deep ripping configuration.
• Multi-Shank Ripper – Generally for lighter duty ripping applications in less severe materials. Provides high levels of productivity. Tailors the tractor to the material by using one, two or three shanks.

CapSure™ Hammerless Ripper Tip and Shank Protector Retention System

The tip and shank protector are easily installed with a 180 degree turn of a ¾ inch ratchet. This simple installation means no hammering and therefore improved safety. It also means quicker change outs and less downtime.

Rear Counterweights

Rear counterweights provide proper tractor balance to maximize dozing production. It is recommended if not equipped with any other rear attachment.

Serviceability

Reduce your service time to increase your uptime.

The modular design of the D11T provides excellent serviceability and turnaround time. A key advantage of the D11T’s modular design is the ability to swap out a component with a pre-tested rebuilt or remanufactured unit that puts the machine back to work faster. So, reliability and overall uptime is high, repairs and upkeep costs are low. Modular design translates into more time on the job for the D11T compared to competition.

Ground Level Service Options

The ground level service center mounted on the ripper cylinder or counterweight provides easy access to:

• Secondary engine shutoff
• Access lighting switch
• Fast fuel
• High speed oil change (optional)

Ok-to-Start

The Ok-to-Start strategy provides electronic fluid level verification at startup on the power train and engine oil systems. All information is available via the Advisor Monitoring System within the cab.

Fast Fuel System

The fast fuel system, with positive fuel shut-off to prevent fuel spillage, can reduce fuel waste and decrease downtime.

Customer Support

Your Cat dealer knows how to keep your mining machines producing.

Legendary Cat Dealer Support

From helping you choose the right machine to knowledgeable ongoing support, Cat dealers provide you with unmatched sales and service.

• Preventive maintenance programs and guaranteed maintenance contracts.
• Best-in-class parts availability.
• Operator training to help boost your profits.
• Genuine Cat Remanufactured parts.

Sustainability

Thinking about your legacy for future generations.

Sustainable development for Caterpillar means leveraging technology and innovation to increase efficiency and productivity with less impact on the environment and helping you do the same – enabling your business to become more productive by providing products, services and solutions that use resources more efficiently.

• We are making our dozers as quiet as possible so they have less impact on the communities where they operate. The D11T offers an optional sound suppression package that delivers up to a 6 dB(A) (ISO 6395) reduction in the average spectator sound power level and up to a 4 dB(A) (ISO 6396) reduction in the average operator sound pressure level.
• Ecology drains allow fluids to be easily captured for recycling or proper disposal.
• Major components of Cat dozers are designed to be rebuilt. The Cat Certified Rebuild program conserves natural resources by delivering a cost effective second and even third life for our machines.
• Fuel saving features like Enhanced Auto Shift help decrease overall fuel consumption.

ELECTRICAL

 Alternator, 150 amp

 Back up alarm

 Batteries, 12-volt (4), 200 amp-hour

 Converters, 12-volt, 10 amp and 20 amp

 Diagnostic connector

 Horn, forward warning

 Lights, engine compartment

 Lighting system, five (5) HID/seven (7) Halogen

 Starting receptacle

OPERATOR ENVIRONMENT

 Advisor-electronic monitoring system

 Air conditioner and heater

 Armrest, adjustable

 Cab, FOPS

 Deactivation switch, hydraulic controls

 Decelerator, pedal

 Finger Tip Control (FTC) steering

 Governor switch, electronic

 Hydraulic system: – Electronically controlled for bulldozer and ripper control

 Mirror, rearview

 Radio ready, entertainment

 ROPS rollbar

 Seat belt, retractable 76 mm (3 in)

 Seat, cloth, air suspension

 Wipers, intermittent, low and high speeds

Advisor-electronic monitoring system

 Alternator, 150 amp

 Back up alarm

 Batteries, 12-volt (4), 200 amp-hour

 Converters, 12-volt, 10 amp and 20 amp

 Diagnostic connector

 Horn, forward warning

 Lights, engine compartment

 Lighting system, five (5) HID/seven (7) Halogen

 Starting receptacle

 Advisor-electronic monitoring system

 Air conditioner and heater

 Armrest, adjustable

 Cab, FOPS

 Deactivation switch, hydraulic controls

 Decelerator, pedal

 Finger Tip Control (FTC) steering

 Governor switch, electronic

 Hydraulic system: – Electronically controlled for bulldozer and ripper control

 Mirror, rearview

 Radio ready, entertainment

 ROPS rollbar

 Seat belt, retractable 76 mm (3 in)

 Seat, cloth, air suspension

 Wipers, intermittent, low and high speeds

 C32 with ACERT Technology: – 24-volt electric start

 Aftercoolers, air-to-air

 Air filters, dual with precleaner

 Aluminum bar plate cooling system: – Serial number prefix: AMA and MDG

 Controlled throttle shifting

 Coolant, extended life

 Shift management

 Engine Idle Shutdown Timer

 Engine precleaner

 Ether starting aid, automatic

 Four planet, double-reduction planetary final drives

 Fuel priming pump, electric

 High speed oil changing system

 Hydraulic demand fan

 Mesabi radiator: – Serial number prefix: JEL and JNS

 Mufflers, dual

 Parking brake, electronic

 Prescreener

 Separator, water/fuel

 Thermal shields

 Torque divider

 Transmission, powershift: – (3F/3R speeds)

 Auto blade assist

 Enhanced auto shift

 Product Link (satellite)

 VIMS 3G

 Equalizer bar end pin grease fittings, remote

 Rollers and idlers, lifetime lubricated

 Sprocket rim segments, replaceable

 Suspension-type undercarriage, eight-roller tubular track roller frame

 Three bolt idler and roller caps

 Track adjusters, hydraulic

 Track guides

 Two-piece master links

 Anchorage points

 Fender guard rails

 Heavy duty steps and handles

 Operator not present monitoring system

 Slope and side-slope monitor

 Bottom guards

 CD ROM parts book

 Dual-tilt blade control

 Ecology drains

 Engine enclosure

 Fluid sampling ports

 Grade control ready

 Ground level service center

 Ripper Hydraulics

 Vandalism, protection (8 caplocks)

Air conditioner and heater

 Alternator, 150 amp

 Back up alarm

 Batteries, 12-volt (4), 200 amp-hour

 Converters, 12-volt, 10 amp and 20 amp

 Diagnostic connector

 Horn, forward warning

 Lights, engine compartment

 Lighting system, five (5) HID/seven (7) Halogen

 Starting receptacle

 Advisor-electronic monitoring system

 Air conditioner and heater

 Armrest, adjustable

 Cab, FOPS

 Deactivation switch, hydraulic controls

 Decelerator, pedal

 Finger Tip Control (FTC) steering

 Governor switch, electronic

 Hydraulic system: – Electronically controlled for bulldozer and ripper control

 Mirror, rearview

 Radio ready, entertainment

 ROPS rollbar

 Seat belt, retractable 76 mm (3 in)

 Seat, cloth, air suspension

 Wipers, intermittent, low and high speeds

 C32 with ACERT Technology: – 24-volt electric start

 Aftercoolers, air-to-air

 Air filters, dual with precleaner

 Aluminum bar plate cooling system: – Serial number prefix: AMA and MDG

 Controlled throttle shifting

 Coolant, extended life

 Shift management

 Engine Idle Shutdown Timer

 Engine precleaner

 Ether starting aid, automatic

 Four planet, double-reduction planetary final drives

 Fuel priming pump, electric

 High speed oil changing system

 Hydraulic demand fan

 Mesabi radiator: – Serial number prefix: JEL and JNS

 Mufflers, dual

 Parking brake, electronic

 Prescreener

 Separator, water/fuel

 Thermal shields

 Torque divider

 Transmission, powershift: – (3F/3R speeds)

 Auto blade assist

 Enhanced auto shift

 Product Link (satellite)

 VIMS 3G

 Equalizer bar end pin grease fittings, remote

 Rollers and idlers, lifetime lubricated

 Sprocket rim segments, replaceable

 Suspension-type undercarriage, eight-roller tubular track roller frame

 Three bolt idler and roller caps

 Track adjusters, hydraulic

 Track guides

 Two-piece master links

 Anchorage points

 Fender guard rails

 Heavy duty steps and handles

 Operator not present monitoring system

 Slope and side-slope monitor

 Bottom guards

 CD ROM parts book

 Dual-tilt blade control

 Ecology drains

 Engine enclosure

 Fluid sampling ports

 Grade control ready

 Ground level service center

 Ripper Hydraulics

 Vandalism, protection (8 caplocks)

Armrest, adjustable

 Alternator, 150 amp

 Back up alarm

 Batteries, 12-volt (4), 200 amp-hour

 Converters, 12-volt, 10 amp and 20 amp

 Diagnostic connector

 Horn, forward warning

 Lights, engine compartment

 Lighting system, five (5) HID/seven (7) Halogen

 Starting receptacle

 Advisor-electronic monitoring system

 Air conditioner and heater

 Armrest, adjustable

 Cab, FOPS

 Deactivation switch, hydraulic controls

 Decelerator, pedal

 Finger Tip Control (FTC) steering

 Governor switch, electronic

 Hydraulic system: – Electronically controlled for bulldozer and ripper control

 Mirror, rearview

 Radio ready, entertainment

 ROPS rollbar

 Seat belt, retractable 76 mm (3 in)

 Seat, cloth, air suspension

 Wipers, intermittent, low and high speeds

 C32 with ACERT Technology: – 24-volt electric start

 Aftercoolers, air-to-air

 Air filters, dual with precleaner

 Aluminum bar plate cooling system: – Serial number prefix: AMA and MDG

 Controlled throttle shifting

 Coolant, extended life

 Shift management

 Engine Idle Shutdown Timer

 Engine precleaner

 Ether starting aid, automatic

 Four planet, double-reduction planetary final drives

 Fuel priming pump, electric

 High speed oil changing system

 Hydraulic demand fan

 Mesabi radiator: – Serial number prefix: JEL and JNS

 Mufflers, dual

 Parking brake, electronic

 Prescreener

 Separator, water/fuel

 Thermal shields

 Torque divider

 Transmission, powershift: – (3F/3R speeds)

 Auto blade assist

 Enhanced auto shift

 Product Link (satellite)

 VIMS 3G

 Equalizer bar end pin grease fittings, remote

 Rollers and idlers, lifetime lubricated

 Sprocket rim segments, replaceable

 Suspension-type undercarriage, eight-roller tubular track roller frame

 Three bolt idler and roller caps

 Track adjusters, hydraulic

 Track guides

 Two-piece master links

 Anchorage points

 Fender guard rails

 Heavy duty steps and handles

 Operator not present monitoring system

 Slope and side-slope monitor

 Bottom guards

 CD ROM parts book

 Dual-tilt blade control

 Ecology drains

 Engine enclosure

 Fluid sampling ports

 Grade control ready

 Ground level service center

 Ripper Hydraulics

 Vandalism, protection (8 caplocks)

Cab, FOPS

 Alternator, 150 amp

 Back up alarm

 Batteries, 12-volt (4), 200 amp-hour

 Converters, 12-volt, 10 amp and 20 amp

 Diagnostic connector

 Horn, forward warning

 Lights, engine compartment

 Lighting system, five (5) HID/seven (7) Halogen

 Starting receptacle

 Advisor-electronic monitoring system

 Air conditioner and heater

 Armrest, adjustable

 Cab, FOPS

 Deactivation switch, hydraulic controls

 Decelerator, pedal

 Finger Tip Control (FTC) steering

 Governor switch, electronic

 Hydraulic system: – Electronically controlled for bulldozer and ripper control

 Mirror, rearview

 Radio ready, entertainment

 ROPS rollbar

 Seat belt, retractable 76 mm (3 in)

 Seat, cloth, air suspension

 Wipers, intermittent, low and high speeds

 C32 with ACERT Technology: – 24-volt electric start

 Aftercoolers, air-to-air

 Air filters, dual with precleaner

 Aluminum bar plate cooling system: – Serial number prefix: AMA and MDG

 Controlled throttle shifting

 Coolant, extended life

 Shift management

 Engine Idle Shutdown Timer

 Engine precleaner

 Ether starting aid, automatic

 Four planet, double-reduction planetary final drives

 Fuel priming pump, electric

 High speed oil changing system

 Hydraulic demand fan

 Mesabi radiator: – Serial number prefix: JEL and JNS

 Mufflers, dual

 Parking brake, electronic

 Prescreener

 Separator, water/fuel

 Thermal shields

 Torque divider

 Transmission, powershift: – (3F/3R speeds)

 Auto blade assist

 Enhanced auto shift

 Product Link (satellite)

 VIMS 3G

 Equalizer bar end pin grease fittings, remote

 Rollers and idlers, lifetime lubricated

 Sprocket rim segments, replaceable

 Suspension-type undercarriage, eight-roller tubular track roller frame

 Three bolt idler and roller caps

 Track adjusters, hydraulic

 Track guides

 Two-piece master links

 Anchorage points

 Fender guard rails

 Heavy duty steps and handles

 Operator not present monitoring system

 Slope and side-slope monitor

 Bottom guards

 CD ROM parts book

 Dual-tilt blade control

 Ecology drains

 Engine enclosure

 Fluid sampling ports

 Grade control ready

 Ground level service center

 Ripper Hydraulics

 Vandalism, protection (8 caplocks)

Deactivation switch, hydraulic controls

 Alternator, 150 amp

 Back up alarm

 Batteries, 12-volt (4), 200 amp-hour

 Converters, 12-volt, 10 amp and 20 amp

 Diagnostic connector

 Horn, forward warning

 Lights, engine compartment

 Lighting system, five (5) HID/seven (7) Halogen

 Starting receptacle

 Advisor-electronic monitoring system

 Air conditioner and heater

 Armrest, adjustable

 Cab, FOPS

 Deactivation switch, hydraulic controls

 Decelerator, pedal

 Finger Tip Control (FTC) steering

 Governor switch, electronic

 Hydraulic system: – Electronically controlled for bulldozer and ripper control

 Mirror, rearview

 Radio ready, entertainment

 ROPS rollbar

 Seat belt, retractable 76 mm (3 in)

 Seat, cloth, air suspension

 Wipers, intermittent, low and high speeds

 C32 with ACERT Technology: – 24-volt electric start

 Aftercoolers, air-to-air

 Air filters, dual with precleaner

 Aluminum bar plate cooling system: – Serial number prefix: AMA and MDG

 Controlled throttle shifting

 Coolant, extended life

 Shift management

 Engine Idle Shutdown Timer

 Engine precleaner

 Ether starting aid, automatic

 Four planet, double-reduction planetary final drives

 Fuel priming pump, electric

 High speed oil changing system

 Hydraulic demand fan

 Mesabi radiator: – Serial number prefix: JEL and JNS

 Mufflers, dual

 Parking brake, electronic

 Prescreener

 Separator, water/fuel

 Thermal shields

 Torque divider

 Transmission, powershift: – (3F/3R speeds)

 Auto blade assist

 Enhanced auto shift

 Product Link (satellite)

 VIMS 3G

 Equalizer bar end pin grease fittings, remote

 Rollers and idlers, lifetime lubricated

 Sprocket rim segments, replaceable

 Suspension-type undercarriage, eight-roller tubular track roller frame

 Three bolt idler and roller caps

 Track adjusters, hydraulic

 Track guides

 Two-piece master links

 Anchorage points

 Fender guard rails

 Heavy duty steps and handles

 Operator not present monitoring system

 Slope and side-slope monitor

 Bottom guards

 CD ROM parts book

 Dual-tilt blade control

 Ecology drains

 Engine enclosure

 Fluid sampling ports

 Grade control ready

 Ground level service center

 Ripper Hydraulics

 Vandalism, protection (8 caplocks)

Decelerator, pedal

 Alternator, 150 amp

 Back up alarm

 Batteries, 12-volt (4), 200 amp-hour

 Converters, 12-volt, 10 amp and 20 amp

 Diagnostic connector

 Horn, forward warning

 Lights, engine compartment

 Lighting system, five (5) HID/seven (7) Halogen

 Starting receptacle

 Advisor-electronic monitoring system

 Air conditioner and heater

 Armrest, adjustable

 Cab, FOPS

 Deactivation switch, hydraulic controls

 Decelerator, pedal

 Finger Tip Control (FTC) steering

 Governor switch, electronic

 Hydraulic system: – Electronically controlled for bulldozer and ripper control

 Mirror, rearview

 Radio ready, entertainment

 ROPS rollbar

 Seat belt, retractable 76 mm (3 in)

 Seat, cloth, air suspension

 Wipers, intermittent, low and high speeds

 C32 with ACERT Technology: – 24-volt electric start

 Aftercoolers, air-to-air

 Air filters, dual with precleaner

 Aluminum bar plate cooling system: – Serial number prefix: AMA and MDG

 Controlled throttle shifting

 Coolant, extended life

 Shift management

 Engine Idle Shutdown Timer

 Engine precleaner

 Ether starting aid, automatic

 Four planet, double-reduction planetary final drives

 Fuel priming pump, electric

 High speed oil changing system

 Hydraulic demand fan

 Mesabi radiator: – Serial number prefix: JEL and JNS

 Mufflers, dual

 Parking brake, electronic

 Prescreener

 Separator, water/fuel

 Thermal shields

 Torque divider

 Transmission, powershift: – (3F/3R speeds)

 Auto blade assist

 Enhanced auto shift

 Product Link (satellite)

 VIMS 3G

 Equalizer bar end pin grease fittings, remote

 Rollers and idlers, lifetime lubricated

 Sprocket rim segments, replaceable

 Suspension-type undercarriage, eight-roller tubular track roller frame

 Three bolt idler and roller caps

 Track adjusters, hydraulic

 Track guides

 Two-piece master links

 Anchorage points

 Fender guard rails

 Heavy duty steps and handles

 Operator not present monitoring system

 Slope and side-slope monitor

 Bottom guards

 CD ROM parts book

 Dual-tilt blade control

 Ecology drains

 Engine enclosure

 Fluid sampling ports

 Grade control ready

 Ground level service center

 Ripper Hydraulics

 Vandalism, protection (8 caplocks)

Finger Tip Control (FTC) steering

 Alternator, 150 amp

 Back up alarm

 Batteries, 12-volt (4), 200 amp-hour

 Converters, 12-volt, 10 amp and 20 amp

 Diagnostic connector

 Horn, forward warning

 Lights, engine compartment

 Lighting system, five (5) HID/seven (7) Halogen

 Starting receptacle

 Advisor-electronic monitoring system

 Air conditioner and heater

 Armrest, adjustable

 Cab, FOPS

 Deactivation switch, hydraulic controls

 Decelerator, pedal

 Finger Tip Control (FTC) steering

 Governor switch, electronic

 Hydraulic system: – Electronically controlled for bulldozer and ripper control

 Mirror, rearview

 Radio ready, entertainment

 ROPS rollbar

 Seat belt, retractable 76 mm (3 in)

 Seat, cloth, air suspension

 Wipers, intermittent, low and high speeds

 C32 with ACERT Technology: – 24-volt electric start

 Aftercoolers, air-to-air

 Air filters, dual with precleaner

 Aluminum bar plate cooling system: – Serial number prefix: AMA and MDG

 Controlled throttle shifting

 Coolant, extended life

 Shift management

 Engine Idle Shutdown Timer

 Engine precleaner

 Ether starting aid, automatic

 Four planet, double-reduction planetary final drives

 Fuel priming pump, electric

 High speed oil changing system

 Hydraulic demand fan

 Mesabi radiator: – Serial number prefix: JEL and JNS

 Mufflers, dual

 Parking brake, electronic

 Prescreener

 Separator, water/fuel

 Thermal shields

 Torque divider

 Transmission, powershift: – (3F/3R speeds)

 Auto blade assist

 Enhanced auto shift

 Product Link (satellite)

 VIMS 3G

 Equalizer bar end pin grease fittings, remote

 Rollers and idlers, lifetime lubricated

 Sprocket rim segments, replaceable

 Suspension-type undercarriage, eight-roller tubular track roller frame

 Three bolt idler and roller caps

 Track adjusters, hydraulic

 Track guides

 Two-piece master links

 Anchorage points

 Fender guard rails

 Heavy duty steps and handles

 Operator not present monitoring system

 Slope and side-slope monitor

 Bottom guards

 CD ROM parts book

 Dual-tilt blade control

 Ecology drains

 Engine enclosure

 Fluid sampling ports

 Grade control ready

 Ground level service center

 Ripper Hydraulics

 Vandalism, protection (8 caplocks)

Governor switch, electronic

 Alternator, 150 amp

 Back up alarm

 Batteries, 12-volt (4), 200 amp-hour

 Converters, 12-volt, 10 amp and 20 amp

 Diagnostic connector

 Horn, forward warning

 Lights, engine compartment

 Lighting system, five (5) HID/seven (7) Halogen

 Starting receptacle

 Advisor-electronic monitoring system

 Air conditioner and heater

 Armrest, adjustable

 Cab, FOPS

 Deactivation switch, hydraulic controls

 Decelerator, pedal

 Finger Tip Control (FTC) steering

 Governor switch, electronic

 Hydraulic system: – Electronically controlled for bulldozer and ripper control

 Mirror, rearview

 Radio ready, entertainment

 ROPS rollbar

 Seat belt, retractable 76 mm (3 in)

 Seat, cloth, air suspension

 Wipers, intermittent, low and high speeds

 C32 with ACERT Technology: – 24-volt electric start

 Aftercoolers, air-to-air

 Air filters, dual with precleaner

 Aluminum bar plate cooling system: – Serial number prefix: AMA and MDG

 Controlled throttle shifting

 Coolant, extended life

 Shift management

 Engine Idle Shutdown Timer

 Engine precleaner

 Ether starting aid, automatic

 Four planet, double-reduction planetary final drives

 Fuel priming pump, electric

 High speed oil changing system

 Hydraulic demand fan

 Mesabi radiator: – Serial number prefix: JEL and JNS

 Mufflers, dual

 Parking brake, electronic

 Prescreener

 Separator, water/fuel

 Thermal shields

 Torque divider

 Transmission, powershift: – (3F/3R speeds)

 Auto blade assist

 Enhanced auto shift

 Product Link (satellite)

 VIMS 3G

 Equalizer bar end pin grease fittings, remote

 Rollers and idlers, lifetime lubricated

 Sprocket rim segments, replaceable

 Suspension-type undercarriage, eight-roller tubular track roller frame

 Three bolt idler and roller caps

 Track adjusters, hydraulic

 Track guides

 Two-piece master links

 Anchorage points

 Fender guard rails

 Heavy duty steps and handles

 Operator not present monitoring system

 Slope and side-slope monitor

 Bottom guards

 CD ROM parts book

 Dual-tilt blade control

 Ecology drains

 Engine enclosure

 Fluid sampling ports

 Grade control ready

 Ground level service center

 Ripper Hydraulics

 Vandalism, protection (8 caplocks)

Hydraulic system: – Electronically controlled for bulldozer and ripper control

 Alternator, 150 amp

 Back up alarm

 Batteries, 12-volt (4), 200 amp-hour

 Converters, 12-volt, 10 amp and 20 amp

 Diagnostic connector

 Horn, forward warning

 Lights, engine compartment

 Lighting system, five (5) HID/seven (7) Halogen

 Starting receptacle

 Advisor-electronic monitoring system

 Air conditioner and heater

 Armrest, adjustable

 Cab, FOPS

 Deactivation switch, hydraulic controls

 Decelerator, pedal

 Finger Tip Control (FTC) steering

 Governor switch, electronic

 Hydraulic system: – Electronically controlled for bulldozer and ripper control

 Mirror, rearview

 Radio ready, entertainment

 ROPS rollbar

 Seat belt, retractable 76 mm (3 in)

 Seat, cloth, air suspension

 Wipers, intermittent, low and high speeds

 C32 with ACERT Technology: – 24-volt electric start

 Aftercoolers, air-to-air

 Air filters, dual with precleaner

 Aluminum bar plate cooling system: – Serial number prefix: AMA and MDG

 Controlled throttle shifting

 Coolant, extended life

 Shift management

 Engine Idle Shutdown Timer

 Engine precleaner

 Ether starting aid, automatic

 Four planet, double-reduction planetary final drives

 Fuel priming pump, electric

 High speed oil changing system

 Hydraulic demand fan

 Mesabi radiator: – Serial number prefix: JEL and JNS

 Mufflers, dual

 Parking brake, electronic

 Prescreener

 Separator, water/fuel

 Thermal shields

 Torque divider

 Transmission, powershift: – (3F/3R speeds)

 Auto blade assist

 Enhanced auto shift

 Product Link (satellite)

 VIMS 3G

 Equalizer bar end pin grease fittings, remote

 Rollers and idlers, lifetime lubricated

 Sprocket rim segments, replaceable

 Suspension-type undercarriage, eight-roller tubular track roller frame

 Three bolt idler and roller caps

 Track adjusters, hydraulic

 Track guides

 Two-piece master links

 Anchorage points

 Fender guard rails

 Heavy duty steps and handles

 Operator not present monitoring system

 Slope and side-slope monitor

 Bottom guards

 CD ROM parts book

 Dual-tilt blade control

 Ecology drains

 Engine enclosure

 Fluid sampling ports

 Grade control ready

 Ground level service center

 Ripper Hydraulics

 Vandalism, protection (8 caplocks)

Mirror, rearview

 Alternator, 150 amp

 Back up alarm

 Batteries, 12-volt (4), 200 amp-hour

 Converters, 12-volt, 10 amp and 20 amp

 Diagnostic connector

 Horn, forward warning

 Lights, engine compartment

 Lighting system, five (5) HID/seven (7) Halogen

 Starting receptacle

 Advisor-electronic monitoring system

 Air conditioner and heater

 Armrest, adjustable

 Cab, FOPS

 Deactivation switch, hydraulic controls

 Decelerator, pedal

 Finger Tip Control (FTC) steering

 Governor switch, electronic

 Hydraulic system: – Electronically controlled for bulldozer and ripper control

 Mirror, rearview

 Radio ready, entertainment

 ROPS rollbar

 Seat belt, retractable 76 mm (3 in)

 Seat, cloth, air suspension

 Wipers, intermittent, low and high speeds

 C32 with ACERT Technology: – 24-volt electric start

 Aftercoolers, air-to-air

 Air filters, dual with precleaner

 Aluminum bar plate cooling system: – Serial number prefix: AMA and MDG

 Controlled throttle shifting

 Coolant, extended life

 Shift management

 Engine Idle Shutdown Timer

 Engine precleaner

 Ether starting aid, automatic

 Four planet, double-reduction planetary final drives

 Fuel priming pump, electric

 High speed oil changing system

 Hydraulic demand fan

 Mesabi radiator: – Serial number prefix: JEL and JNS

 Mufflers, dual

 Parking brake, electronic

 Prescreener

 Separator, water/fuel

 Thermal shields

 Torque divider

 Transmission, powershift: – (3F/3R speeds)

 Auto blade assist

 Enhanced auto shift

 Product Link (satellite)

 VIMS 3G

 Equalizer bar end pin grease fittings, remote

 Rollers and idlers, lifetime lubricated

 Sprocket rim segments, replaceable

 Suspension-type undercarriage, eight-roller tubular track roller frame

 Three bolt idler and roller caps

 Track adjusters, hydraulic

 Track guides

 Two-piece master links

 Anchorage points

 Fender guard rails

 Heavy duty steps and handles

 Operator not present monitoring system

 Slope and side-slope monitor

 Bottom guards

 CD ROM parts book

 Dual-tilt blade control

 Ecology drains

 Engine enclosure

 Fluid sampling ports

 Grade control ready

 Ground level service center

 Ripper Hydraulics

 Vandalism, protection (8 caplocks)

Radio ready, entertainment

 Alternator, 150 amp

 Back up alarm

 Batteries, 12-volt (4), 200 amp-hour

 Converters, 12-volt, 10 amp and 20 amp

 Diagnostic connector

 Horn, forward warning

 Lights, engine compartment

 Lighting system, five (5) HID/seven (7) Halogen

 Starting receptacle

 Advisor-electronic monitoring system

 Air conditioner and heater

 Armrest, adjustable

 Cab, FOPS

 Deactivation switch, hydraulic controls

 Decelerator, pedal

 Finger Tip Control (FTC) steering

 Governor switch, electronic

 Hydraulic system: – Electronically controlled for bulldozer and ripper control

 Mirror, rearview

 Radio ready, entertainment

 ROPS rollbar

 Seat belt, retractable 76 mm (3 in)

 Seat, cloth, air suspension

 Wipers, intermittent, low and high speeds

 C32 with ACERT Technology: – 24-volt electric start

 Aftercoolers, air-to-air

 Air filters, dual with precleaner

 Aluminum bar plate cooling system: – Serial number prefix: AMA and MDG

 Controlled throttle shifting

 Coolant, extended life

 Shift management

 Engine Idle Shutdown Timer

 Engine precleaner

 Ether starting aid, automatic

 Four planet, double-reduction planetary final drives

 Fuel priming pump, electric

 High speed oil changing system

 Hydraulic demand fan

 Mesabi radiator: – Serial number prefix: JEL and JNS

 Mufflers, dual

 Parking brake, electronic

 Prescreener

 Separator, water/fuel

 Thermal shields

 Torque divider

 Transmission, powershift: – (3F/3R speeds)

 Auto blade assist

 Enhanced auto shift

 Product Link (satellite)

 VIMS 3G

 Equalizer bar end pin grease fittings, remote

 Rollers and idlers, lifetime lubricated

 Sprocket rim segments, replaceable

 Suspension-type undercarriage, eight-roller tubular track roller frame

 Three bolt idler and roller caps

 Track adjusters, hydraulic

 Track guides

 Two-piece master links

 Anchorage points

 Fender guard rails

 Heavy duty steps and handles

 Operator not present monitoring system

 Slope and side-slope monitor

 Bottom guards

 CD ROM parts book

 Dual-tilt blade control

 Ecology drains

 Engine enclosure

 Fluid sampling ports

 Grade control ready

 Ground level service center

 Ripper Hydraulics

 Vandalism, protection (8 caplocks)

ROPS rollbar

 Alternator, 150 amp

 Back up alarm

 Batteries, 12-volt (4), 200 amp-hour

 Converters, 12-volt, 10 amp and 20 amp

 Diagnostic connector

 Horn, forward warning

 Lights, engine compartment

 Lighting system, five (5) HID/seven (7) Halogen

 Starting receptacle

 Advisor-electronic monitoring system

 Air conditioner and heater

 Armrest, adjustable

 Cab, FOPS

 Deactivation switch, hydraulic controls

 Decelerator, pedal

 Finger Tip Control (FTC) steering

 Governor switch, electronic

 Hydraulic system: – Electronically controlled for bulldozer and ripper control

 Mirror, rearview

 Radio ready, entertainment

 ROPS rollbar

 Seat belt, retractable 76 mm (3 in)

 Seat, cloth, air suspension

 Wipers, intermittent, low and high speeds

 C32 with ACERT Technology: – 24-volt electric start

 Aftercoolers, air-to-air

 Air filters, dual with precleaner

 Aluminum bar plate cooling system: – Serial number prefix: AMA and MDG

 Controlled throttle shifting

 Coolant, extended life

 Shift management

 Engine Idle Shutdown Timer

 Engine precleaner

 Ether starting aid, automatic

 Four planet, double-reduction planetary final drives

 Fuel priming pump, electric

 High speed oil changing system

 Hydraulic demand fan

 Mesabi radiator: – Serial number prefix: JEL and JNS

 Mufflers, dual

 Parking brake, electronic

 Prescreener

 Separator, water/fuel

 Thermal shields

 Torque divider

 Transmission, powershift: – (3F/3R speeds)

 Auto blade assist

 Enhanced auto shift

 Product Link (satellite)

 VIMS 3G

 Equalizer bar end pin grease fittings, remote

 Rollers and idlers, lifetime lubricated

 Sprocket rim segments, replaceable

 Suspension-type undercarriage, eight-roller tubular track roller frame

 Three bolt idler and roller caps

 Track adjusters, hydraulic

 Track guides

 Two-piece master links

 Anchorage points

 Fender guard rails

 Heavy duty steps and handles

 Operator not present monitoring system

 Slope and side-slope monitor

 Bottom guards

 CD ROM parts book

 Dual-tilt blade control

 Ecology drains

 Engine enclosure

 Fluid sampling ports

 Grade control ready

 Ground level service center

 Ripper Hydraulics

 Vandalism, protection (8 caplocks)

Seat belt, retractable 76 mm (3 in)

 Alternator, 150 amp

 Back up alarm

 Batteries, 12-volt (4), 200 amp-hour

 Converters, 12-volt, 10 amp and 20 amp

 Diagnostic connector

 Horn, forward warning

 Lights, engine compartment

 Lighting system, five (5) HID/seven (7) Halogen

 Starting receptacle

 Advisor-electronic monitoring system

 Air conditioner and heater

 Armrest, adjustable

 Cab, FOPS

 Deactivation switch, hydraulic controls

 Decelerator, pedal

 Finger Tip Control (FTC) steering

 Governor switch, electronic

 Hydraulic system: – Electronically controlled for bulldozer and ripper control

 Mirror, rearview

 Radio ready, entertainment

 ROPS rollbar

 Seat belt, retractable 76 mm (3 in)

 Seat, cloth, air suspension

 Wipers, intermittent, low and high speeds

 C32 with ACERT Technology: – 24-volt electric start

 Aftercoolers, air-to-air

 Air filters, dual with precleaner

 Aluminum bar plate cooling system: – Serial number prefix: AMA and MDG

 Controlled throttle shifting

 Coolant, extended life

 Shift management

 Engine Idle Shutdown Timer

 Engine precleaner

 Ether starting aid, automatic

 Four planet, double-reduction planetary final drives

 Fuel priming pump, electric

 High speed oil changing system

 Hydraulic demand fan

 Mesabi radiator: – Serial number prefix: JEL and JNS

 Mufflers, dual

 Parking brake, electronic

 Prescreener

 Separator, water/fuel

 Thermal shields

 Torque divider

 Transmission, powershift: – (3F/3R speeds)

 Auto blade assist

 Enhanced auto shift

 Product Link (satellite)

 VIMS 3G

 Equalizer bar end pin grease fittings, remote

 Rollers and idlers, lifetime lubricated

 Sprocket rim segments, replaceable

 Suspension-type undercarriage, eight-roller tubular track roller frame

 Three bolt idler and roller caps

 Track adjusters, hydraulic

 Track guides

 Two-piece master links

 Anchorage points

 Fender guard rails

 Heavy duty steps and handles

 Operator not present monitoring system

 Slope and side-slope monitor

 Bottom guards

 CD ROM parts book

 Dual-tilt blade control

 Ecology drains

 Engine enclosure

 Fluid sampling ports

 Grade control ready

 Ground level service center

 Ripper Hydraulics

 Vandalism, protection (8 caplocks)

Seat, cloth, air suspension

 Alternator, 150 amp

 Back up alarm

 Batteries, 12-volt (4), 200 amp-hour

 Converters, 12-volt, 10 amp and 20 amp

 Diagnostic connector

 Horn, forward warning

 Lights, engine compartment

 Lighting system, five (5) HID/seven (7) Halogen

 Starting receptacle

 Advisor-electronic monitoring system

 Air conditioner and heater

 Armrest, adjustable

 Cab, FOPS

 Deactivation switch, hydraulic controls

 Decelerator, pedal

 Finger Tip Control (FTC) steering

 Governor switch, electronic

 Hydraulic system: – Electronically controlled for bulldozer and ripper control

 Mirror, rearview

 Radio ready, entertainment

 ROPS rollbar

 Seat belt, retractable 76 mm (3 in)

 Seat, cloth, air suspension

 Wipers, intermittent, low and high speeds

 C32 with ACERT Technology: – 24-volt electric start

 Aftercoolers, air-to-air

 Air filters, dual with precleaner

 Aluminum bar plate cooling system: – Serial number prefix: AMA and MDG

 Controlled throttle shifting

 Coolant, extended life

 Shift management

 Engine Idle Shutdown Timer

 Engine precleaner

 Ether starting aid, automatic

 Four planet, double-reduction planetary final drives

 Fuel priming pump, electric

 High speed oil changing system

 Hydraulic demand fan

 Mesabi radiator: – Serial number prefix: JEL and JNS

 Mufflers, dual

 Parking brake, electronic

 Prescreener

 Separator, water/fuel

 Thermal shields

 Torque divider

 Transmission, powershift: – (3F/3R speeds)

 Auto blade assist

 Enhanced auto shift

 Product Link (satellite)

 VIMS 3G

 Equalizer bar end pin grease fittings, remote

 Rollers and idlers, lifetime lubricated

 Sprocket rim segments, replaceable

 Suspension-type undercarriage, eight-roller tubular track roller frame

 Three bolt idler and roller caps

 Track adjusters, hydraulic

 Track guides

 Two-piece master links

 Anchorage points

 Fender guard rails

 Heavy duty steps and handles

 Operator not present monitoring system

 Slope and side-slope monitor

 Bottom guards

 CD ROM parts book

 Dual-tilt blade control

 Ecology drains

 Engine enclosure

 Fluid sampling ports

 Grade control ready

 Ground level service center

 Ripper Hydraulics

 Vandalism, protection (8 caplocks)

Wipers, intermittent, low and high speeds

 Alternator, 150 amp

 Back up alarm

 Batteries, 12-volt (4), 200 amp-hour

 Converters, 12-volt, 10 amp and 20 amp

 Diagnostic connector

 Horn, forward warning

 Lights, engine compartment

 Lighting system, five (5) HID/seven (7) Halogen

 Starting receptacle

 Advisor-electronic monitoring system

 Air conditioner and heater

 Armrest, adjustable

 Cab, FOPS

 Deactivation switch, hydraulic controls

 Decelerator, pedal

 Finger Tip Control (FTC) steering

 Governor switch, electronic

 Hydraulic system: – Electronically controlled for bulldozer and ripper control

 Mirror, rearview

 Radio ready, entertainment

 ROPS rollbar

 Seat belt, retractable 76 mm (3 in)

 Seat, cloth, air suspension

 Wipers, intermittent, low and high speeds

 C32 with ACERT Technology: – 24-volt electric start

 Aftercoolers, air-to-air

 Air filters, dual with precleaner

 Aluminum bar plate cooling system: – Serial number prefix: AMA and MDG

 Controlled throttle shifting

 Coolant, extended life

 Shift management

 Engine Idle Shutdown Timer

 Engine precleaner

 Ether starting aid, automatic

 Four planet, double-reduction planetary final drives

 Fuel priming pump, electric

 High speed oil changing system

 Hydraulic demand fan

 Mesabi radiator: – Serial number prefix: JEL and JNS

 Mufflers, dual

 Parking brake, electronic

 Prescreener

 Separator, water/fuel

 Thermal shields

 Torque divider

 Transmission, powershift: – (3F/3R speeds)

 Auto blade assist

 Enhanced auto shift

 Product Link (satellite)

 VIMS 3G

 Equalizer bar end pin grease fittings, remote

 Rollers and idlers, lifetime lubricated

 Sprocket rim segments, replaceable

 Suspension-type undercarriage, eight-roller tubular track roller frame

 Three bolt idler and roller caps

 Track adjusters, hydraulic

 Track guides

 Two-piece master links

 Anchorage points

 Fender guard rails

 Heavy duty steps and handles

 Operator not present monitoring system

 Slope and side-slope monitor

 Bottom guards

 CD ROM parts book

 Dual-tilt blade control

 Ecology drains

 Engine enclosure

 Fluid sampling ports

 Grade control ready

 Ground level service center

 Ripper Hydraulics

 Vandalism, protection (8 caplocks)

POWER TRAIN

 C32 with ACERT Technology: – 24-volt electric start

 Aftercoolers, air-to-air

 Air filters, dual with precleaner

 Aluminum bar plate cooling system: – Serial number prefix: AMA and MDG

 Controlled throttle shifting

 Coolant, extended life

 Shift management

 Engine Idle Shutdown Timer

 Engine precleaner

 Ether starting aid, automatic

 Four planet, double-reduction planetary final drives

 Fuel priming pump, electric

 High speed oil changing system

 Hydraulic demand fan

 Mesabi radiator: – Serial number prefix: JEL and JNS

 Mufflers, dual

 Parking brake, electronic

 Prescreener

 Separator, water/fuel

 Thermal shields

 Torque divider

 Transmission, powershift: – (3F/3R speeds)

C32 with ACERT Technology: – 24-volt electric start

 Alternator, 150 amp

 Back up alarm

 Batteries, 12-volt (4), 200 amp-hour

 Converters, 12-volt, 10 amp and 20 amp

 Diagnostic connector

 Horn, forward warning

 Lights, engine compartment

 Lighting system, five (5) HID/seven (7) Halogen

 Starting receptacle

 Advisor-electronic monitoring system

 Air conditioner and heater

 Armrest, adjustable

 Cab, FOPS

 Deactivation switch, hydraulic controls

 Decelerator, pedal

 Finger Tip Control (FTC) steering

 Governor switch, electronic

 Hydraulic system: – Electronically controlled for bulldozer and ripper control

 Mirror, rearview

 Radio ready, entertainment

 ROPS rollbar

 Seat belt, retractable 76 mm (3 in)

 Seat, cloth, air suspension

 Wipers, intermittent, low and high speeds

 C32 with ACERT Technology: – 24-volt electric start

 Aftercoolers, air-to-air

 Air filters, dual with precleaner

 Aluminum bar plate cooling system: – Serial number prefix: AMA and MDG

 Controlled throttle shifting

 Coolant, extended life

 Shift management

 Engine Idle Shutdown Timer

 Engine precleaner

 Ether starting aid, automatic

 Four planet, double-reduction planetary final drives

 Fuel priming pump, electric

 High speed oil changing system

 Hydraulic demand fan

 Mesabi radiator: – Serial number prefix: JEL and JNS

 Mufflers, dual

 Parking brake, electronic

 Prescreener

 Separator, water/fuel

 Thermal shields

 Torque divider

 Transmission, powershift: – (3F/3R speeds)

 Auto blade assist

 Enhanced auto shift

 Product Link (satellite)

 VIMS 3G

 Equalizer bar end pin grease fittings, remote

 Rollers and idlers, lifetime lubricated

 Sprocket rim segments, replaceable

 Suspension-type undercarriage, eight-roller tubular track roller frame

 Three bolt idler and roller caps

 Track adjusters, hydraulic

 Track guides

 Two-piece master links

 Anchorage points

 Fender guard rails

 Heavy duty steps and handles

 Operator not present monitoring system

 Slope and side-slope monitor

 Bottom guards

 CD ROM parts book

 Dual-tilt blade control

 Ecology drains

 Engine enclosure

 Fluid sampling ports

 Grade control ready

 Ground level service center

 Ripper Hydraulics

 Vandalism, protection (8 caplocks)

Aftercoolers, air-to-air

 Alternator, 150 amp

 Back up alarm

 Batteries, 12-volt (4), 200 amp-hour

 Converters, 12-volt, 10 amp and 20 amp

 Diagnostic connector

 Horn, forward warning

 Lights, engine compartment

 Lighting system, five (5) HID/seven (7) Halogen

 Starting receptacle

 Advisor-electronic monitoring system

 Air conditioner and heater

 Armrest, adjustable

 Cab, FOPS

 Deactivation switch, hydraulic controls

 Decelerator, pedal

 Finger Tip Control (FTC) steering

 Governor switch, electronic

 Hydraulic system: – Electronically controlled for bulldozer and ripper control

 Mirror, rearview

 Radio ready, entertainment

 ROPS rollbar

 Seat belt, retractable 76 mm (3 in)

 Seat, cloth, air suspension

 Wipers, intermittent, low and high speeds

 C32 with ACERT Technology: – 24-volt electric start

 Aftercoolers, air-to-air

 Air filters, dual with precleaner

 Aluminum bar plate cooling system: – Serial number prefix: AMA and MDG

 Controlled throttle shifting

 Coolant, extended life

 Shift management

 Engine Idle Shutdown Timer

 Engine precleaner

 Ether starting aid, automatic

 Four planet, double-reduction planetary final drives

 Fuel priming pump, electric

 High speed oil changing system

 Hydraulic demand fan

 Mesabi radiator: – Serial number prefix: JEL and JNS

 Mufflers, dual

 Parking brake, electronic

 Prescreener

 Separator, water/fuel

 Thermal shields

 Torque divider

 Transmission, powershift: – (3F/3R speeds)

 Auto blade assist

 Enhanced auto shift

 Product Link (satellite)

 VIMS 3G

 Equalizer bar end pin grease fittings, remote

 Rollers and idlers, lifetime lubricated

 Sprocket rim segments, replaceable

 Suspension-type undercarriage, eight-roller tubular track roller frame

 Three bolt idler and roller caps

 Track adjusters, hydraulic

 Track guides

 Two-piece master links

 Anchorage points

 Fender guard rails

 Heavy duty steps and handles

 Operator not present monitoring system

 Slope and side-slope monitor

 Bottom guards

 CD ROM parts book

 Dual-tilt blade control

 Ecology drains

 Engine enclosure

 Fluid sampling ports

 Grade control ready

 Ground level service center

 Ripper Hydraulics

 Vandalism, protection (8 caplocks)

Air filters, dual with precleaner

 Alternator, 150 amp

 Back up alarm

 Batteries, 12-volt (4), 200 amp-hour

 Converters, 12-volt, 10 amp and 20 amp

 Diagnostic connector

 Horn, forward warning

 Lights, engine compartment

 Lighting system, five (5) HID/seven (7) Halogen

 Starting receptacle

 Advisor-electronic monitoring system

 Air conditioner and heater

 Armrest, adjustable

 Cab, FOPS

 Deactivation switch, hydraulic controls

 Decelerator, pedal

 Finger Tip Control (FTC) steering

 Governor switch, electronic

 Hydraulic system: – Electronically controlled for bulldozer and ripper control

 Mirror, rearview

 Radio ready, entertainment

 ROPS rollbar

 Seat belt, retractable 76 mm (3 in)

 Seat, cloth, air suspension

 Wipers, intermittent, low and high speeds

 C32 with ACERT Technology: – 24-volt electric start

 Aftercoolers, air-to-air

 Air filters, dual with precleaner

 Aluminum bar plate cooling system: – Serial number prefix: AMA and MDG

 Controlled throttle shifting

 Coolant, extended life

 Shift management

 Engine Idle Shutdown Timer

 Engine precleaner

 Ether starting aid, automatic

 Four planet, double-reduction planetary final drives

 Fuel priming pump, electric

 High speed oil changing system

 Hydraulic demand fan

 Mesabi radiator: – Serial number prefix: JEL and JNS

 Mufflers, dual

 Parking brake, electronic

 Prescreener

 Separator, water/fuel

 Thermal shields

 Torque divider

 Transmission, powershift: – (3F/3R speeds)

 Auto blade assist

 Enhanced auto shift

 Product Link (satellite)

 VIMS 3G

 Equalizer bar end pin grease fittings, remote

 Rollers and idlers, lifetime lubricated

 Sprocket rim segments, replaceable

 Suspension-type undercarriage, eight-roller tubular track roller frame

 Three bolt idler and roller caps

 Track adjusters, hydraulic

 Track guides

 Two-piece master links

 Anchorage points

 Fender guard rails

 Heavy duty steps and handles

 Operator not present monitoring system

 Slope and side-slope monitor

 Bottom guards

 CD ROM parts book

 Dual-tilt blade control

 Ecology drains

 Engine enclosure

 Fluid sampling ports

 Grade control ready

 Ground level service center

 Ripper Hydraulics

 Vandalism, protection (8 caplocks)

Aluminum bar plate cooling system: – Serial number prefix: AMA and MDG

 Alternator, 150 amp

 Back up alarm

 Batteries, 12-volt (4), 200 amp-hour

 Converters, 12-volt, 10 amp and 20 amp

 Diagnostic connector

 Horn, forward warning

 Lights, engine compartment

 Lighting system, five (5) HID/seven (7) Halogen

 Starting receptacle

 Advisor-electronic monitoring system

 Air conditioner and heater

 Armrest, adjustable

 Cab, FOPS

 Deactivation switch, hydraulic controls

 Decelerator, pedal

 Finger Tip Control (FTC) steering

 Governor switch, electronic

 Hydraulic system: – Electronically controlled for bulldozer and ripper control

 Mirror, rearview

 Radio ready, entertainment

 ROPS rollbar

 Seat belt, retractable 76 mm (3 in)

 Seat, cloth, air suspension

 Wipers, intermittent, low and high speeds

 C32 with ACERT Technology: – 24-volt electric start

 Aftercoolers, air-to-air

 Air filters, dual with precleaner

 Aluminum bar plate cooling system: – Serial number prefix: AMA and MDG

 Controlled throttle shifting

 Coolant, extended life

 Shift management

 Engine Idle Shutdown Timer

 Engine precleaner

 Ether starting aid, automatic

 Four planet, double-reduction planetary final drives

 Fuel priming pump, electric

 High speed oil changing system

 Hydraulic demand fan

 Mesabi radiator: – Serial number prefix: JEL and JNS

 Mufflers, dual

 Parking brake, electronic

 Prescreener

 Separator, water/fuel

 Thermal shields

 Torque divider

 Transmission, powershift: – (3F/3R speeds)

 Auto blade assist

 Enhanced auto shift

 Product Link (satellite)

 VIMS 3G

 Equalizer bar end pin grease fittings, remote

 Rollers and idlers, lifetime lubricated

 Sprocket rim segments, replaceable

 Suspension-type undercarriage, eight-roller tubular track roller frame

 Three bolt idler and roller caps

 Track adjusters, hydraulic

 Track guides

 Two-piece master links

 Anchorage points

 Fender guard rails

 Heavy duty steps and handles

 Operator not present monitoring system

 Slope and side-slope monitor

 Bottom guards

 CD ROM parts book

 Dual-tilt blade control

 Ecology drains

 Engine enclosure

 Fluid sampling ports

 Grade control ready

 Ground level service center

 Ripper Hydraulics

 Vandalism, protection (8 caplocks)

Controlled throttle shifting

 Alternator, 150 amp

 Back up alarm

 Batteries, 12-volt (4), 200 amp-hour

 Converters, 12-volt, 10 amp and 20 amp

 Diagnostic connector

 Horn, forward warning

 Lights, engine compartment

 Lighting system, five (5) HID/seven (7) Halogen

 Starting receptacle

 Advisor-electronic monitoring system

 Air conditioner and heater

 Armrest, adjustable

 Cab, FOPS

 Deactivation switch, hydraulic controls

 Decelerator, pedal

 Finger Tip Control (FTC) steering

 Governor switch, electronic

 Hydraulic system: – Electronically controlled for bulldozer and ripper control

 Mirror, rearview

 Radio ready, entertainment

 ROPS rollbar

 Seat belt, retractable 76 mm (3 in)

 Seat, cloth, air suspension

 Wipers, intermittent, low and high speeds

 C32 with ACERT Technology: – 24-volt electric start

 Aftercoolers, air-to-air

 Air filters, dual with precleaner

 Aluminum bar plate cooling system: – Serial number prefix: AMA and MDG

 Controlled throttle shifting

 Coolant, extended life

 Shift management

 Engine Idle Shutdown Timer

 Engine precleaner

 Ether starting aid, automatic

 Four planet, double-reduction planetary final drives

 Fuel priming pump, electric

 High speed oil changing system

 Hydraulic demand fan

 Mesabi radiator: – Serial number prefix: JEL and JNS

 Mufflers, dual

 Parking brake, electronic

 Prescreener

 Separator, water/fuel

 Thermal shields

 Torque divider

 Transmission, powershift: – (3F/3R speeds)

 Auto blade assist

 Enhanced auto shift

 Product Link (satellite)

 VIMS 3G

 Equalizer bar end pin grease fittings, remote

 Rollers and idlers, lifetime lubricated

 Sprocket rim segments, replaceable

 Suspension-type undercarriage, eight-roller tubular track roller frame

 Three bolt idler and roller caps

 Track adjusters, hydraulic

 Track guides

 Two-piece master links

 Anchorage points

 Fender guard rails

 Heavy duty steps and handles

 Operator not present monitoring system

 Slope and side-slope monitor

 Bottom guards

 CD ROM parts book

 Dual-tilt blade control

 Ecology drains

 Engine enclosure

 Fluid sampling ports

 Grade control ready

 Ground level service center

 Ripper Hydraulics

 Vandalism, protection (8 caplocks)

Coolant, extended life

 Alternator, 150 amp

 Back up alarm

 Batteries, 12-volt (4), 200 amp-hour

 Converters, 12-volt, 10 amp and 20 amp

 Diagnostic connector

 Horn, forward warning

 Lights, engine compartment

 Lighting system, five (5) HID/seven (7) Halogen

 Starting receptacle

 Advisor-electronic monitoring system

 Air conditioner and heater

 Armrest, adjustable

 Cab, FOPS

 Deactivation switch, hydraulic controls

 Decelerator, pedal

 Finger Tip Control (FTC) steering

 Governor switch, electronic

 Hydraulic system: – Electronically controlled for bulldozer and ripper control

 Mirror, rearview

 Radio ready, entertainment

 ROPS rollbar

 Seat belt, retractable 76 mm (3 in)

 Seat, cloth, air suspension

 Wipers, intermittent, low and high speeds

 C32 with ACERT Technology: – 24-volt electric start

 Aftercoolers, air-to-air

 Air filters, dual with precleaner

 Aluminum bar plate cooling system: – Serial number prefix: AMA and MDG

 Controlled throttle shifting

 Coolant, extended life

 Shift management

 Engine Idle Shutdown Timer

 Engine precleaner

 Ether starting aid, automatic

 Four planet, double-reduction planetary final drives

 Fuel priming pump, electric

 High speed oil changing system

 Hydraulic demand fan

 Mesabi radiator: – Serial number prefix: JEL and JNS

 Mufflers, dual

 Parking brake, electronic

 Prescreener

 Separator, water/fuel

 Thermal shields

 Torque divider

 Transmission, powershift: – (3F/3R speeds)

 Auto blade assist

 Enhanced auto shift

 Product Link (satellite)

 VIMS 3G

 Equalizer bar end pin grease fittings, remote

 Rollers and idlers, lifetime lubricated

 Sprocket rim segments, replaceable

 Suspension-type undercarriage, eight-roller tubular track roller frame

 Three bolt idler and roller caps

 Track adjusters, hydraulic

 Track guides

 Two-piece master links

 Anchorage points

 Fender guard rails

 Heavy duty steps and handles

 Operator not present monitoring system

 Slope and side-slope monitor

 Bottom guards

 CD ROM parts book

 Dual-tilt blade control

 Ecology drains

 Engine enclosure

 Fluid sampling ports

 Grade control ready

 Ground level service center

 Ripper Hydraulics

 Vandalism, protection (8 caplocks)

Shift management

 Alternator, 150 amp

 Back up alarm

 Batteries, 12-volt (4), 200 amp-hour

 Converters, 12-volt, 10 amp and 20 amp

 Diagnostic connector

 Horn, forward warning

 Lights, engine compartment

 Lighting system, five (5) HID/seven (7) Halogen

 Starting receptacle

 Advisor-electronic monitoring system

 Air conditioner and heater

 Armrest, adjustable

 Cab, FOPS

 Deactivation switch, hydraulic controls

 Decelerator, pedal

 Finger Tip Control (FTC) steering

 Governor switch, electronic

 Hydraulic system: – Electronically controlled for bulldozer and ripper control

 Mirror, rearview

 Radio ready, entertainment

 ROPS rollbar

 Seat belt, retractable 76 mm (3 in)

 Seat, cloth, air suspension

 Wipers, intermittent, low and high speeds

 C32 with ACERT Technology: – 24-volt electric start

 Aftercoolers, air-to-air

 Air filters, dual with precleaner

 Aluminum bar plate cooling system: – Serial number prefix: AMA and MDG

 Controlled throttle shifting

 Coolant, extended life

 Shift management

 Engine Idle Shutdown Timer

 Engine precleaner

 Ether starting aid, automatic

 Four planet, double-reduction planetary final drives

 Fuel priming pump, electric

 High speed oil changing system

 Hydraulic demand fan

 Mesabi radiator: – Serial number prefix: JEL and JNS

 Mufflers, dual

 Parking brake, electronic

 Prescreener

 Separator, water/fuel

 Thermal shields

 Torque divider

 Transmission, powershift: – (3F/3R speeds)

 Auto blade assist

 Enhanced auto shift

 Product Link (satellite)

 VIMS 3G

 Equalizer bar end pin grease fittings, remote

 Rollers and idlers, lifetime lubricated

 Sprocket rim segments, replaceable

 Suspension-type undercarriage, eight-roller tubular track roller frame

 Three bolt idler and roller caps

 Track adjusters, hydraulic

 Track guides

 Two-piece master links

 Anchorage points

 Fender guard rails

 Heavy duty steps and handles

 Operator not present monitoring system

 Slope and side-slope monitor

 Bottom guards

 CD ROM parts book

 Dual-tilt blade control

 Ecology drains

 Engine enclosure

 Fluid sampling ports

 Grade control ready

 Ground level service center

 Ripper Hydraulics

 Vandalism, protection (8 caplocks)

Engine Idle Shutdown Timer

 Alternator, 150 amp

 Back up alarm

 Batteries, 12-volt (4), 200 amp-hour

 Converters, 12-volt, 10 amp and 20 amp

 Diagnostic connector

 Horn, forward warning

 Lights, engine compartment

 Lighting system, five (5) HID/seven (7) Halogen

 Starting receptacle

 Advisor-electronic monitoring system

 Air conditioner and heater

 Armrest, adjustable

 Cab, FOPS

 Deactivation switch, hydraulic controls

 Decelerator, pedal

 Finger Tip Control (FTC) steering

 Governor switch, electronic

 Hydraulic system: – Electronically controlled for bulldozer and ripper control

 Mirror, rearview

 Radio ready, entertainment

 ROPS rollbar

 Seat belt, retractable 76 mm (3 in)

 Seat, cloth, air suspension

 Wipers, intermittent, low and high speeds

 C32 with ACERT Technology: – 24-volt electric start

 Aftercoolers, air-to-air

 Air filters, dual with precleaner

 Aluminum bar plate cooling system: – Serial number prefix: AMA and MDG

 Controlled throttle shifting

 Coolant, extended life

 Shift management

 Engine Idle Shutdown Timer

 Engine precleaner

 Ether starting aid, automatic

 Four planet, double-reduction planetary final drives

 Fuel priming pump, electric

 High speed oil changing system

 Hydraulic demand fan

 Mesabi radiator: – Serial number prefix: JEL and JNS

 Mufflers, dual

 Parking brake, electronic

 Prescreener

 Separator, water/fuel

 Thermal shields

 Torque divider

 Transmission, powershift: – (3F/3R speeds)

 Auto blade assist

 Enhanced auto shift

 Product Link (satellite)

 VIMS 3G

 Equalizer bar end pin grease fittings, remote

 Rollers and idlers, lifetime lubricated

 Sprocket rim segments, replaceable

 Suspension-type undercarriage, eight-roller tubular track roller frame

 Three bolt idler and roller caps

 Track adjusters, hydraulic

 Track guides

 Two-piece master links

 Anchorage points

 Fender guard rails

 Heavy duty steps and handles

 Operator not present monitoring system

 Slope and side-slope monitor

 Bottom guards

 CD ROM parts book

 Dual-tilt blade control

 Ecology drains

 Engine enclosure

 Fluid sampling ports

 Grade control ready

 Ground level service center

 Ripper Hydraulics

 Vandalism, protection (8 caplocks)

Engine precleaner

 Alternator, 150 amp

 Back up alarm

 Batteries, 12-volt (4), 200 amp-hour

 Converters, 12-volt, 10 amp and 20 amp

 Diagnostic connector

 Horn, forward warning

 Lights, engine compartment

 Lighting system, five (5) HID/seven (7) Halogen

 Starting receptacle

 Advisor-electronic monitoring system

 Air conditioner and heater

 Armrest, adjustable

 Cab, FOPS

 Deactivation switch, hydraulic controls

 Decelerator, pedal

 Finger Tip Control (FTC) steering

 Governor switch, electronic

 Hydraulic system: – Electronically controlled for bulldozer and ripper control

 Mirror, rearview

 Radio ready, entertainment

 ROPS rollbar

 Seat belt, retractable 76 mm (3 in)

 Seat, cloth, air suspension

 Wipers, intermittent, low and high speeds

 C32 with ACERT Technology: – 24-volt electric start

 Aftercoolers, air-to-air

 Air filters, dual with precleaner

 Aluminum bar plate cooling system: – Serial number prefix: AMA and MDG

 Controlled throttle shifting

 Coolant, extended life

 Shift management

 Engine Idle Shutdown Timer

 Engine precleaner

 Ether starting aid, automatic

 Four planet, double-reduction planetary final drives

 Fuel priming pump, electric

 High speed oil changing system

 Hydraulic demand fan

 Mesabi radiator: – Serial number prefix: JEL and JNS

 Mufflers, dual

 Parking brake, electronic

 Prescreener

 Separator, water/fuel

 Thermal shields

 Torque divider

 Transmission, powershift: – (3F/3R speeds)

 Auto blade assist

 Enhanced auto shift

 Product Link (satellite)

 VIMS 3G

 Equalizer bar end pin grease fittings, remote

 Rollers and idlers, lifetime lubricated

 Sprocket rim segments, replaceable

 Suspension-type undercarriage, eight-roller tubular track roller frame

 Three bolt idler and roller caps

 Track adjusters, hydraulic

 Track guides

 Two-piece master links

 Anchorage points

 Fender guard rails

 Heavy duty steps and handles

 Operator not present monitoring system

 Slope and side-slope monitor

 Bottom guards

 CD ROM parts book

 Dual-tilt blade control

 Ecology drains

 Engine enclosure

 Fluid sampling ports

 Grade control ready

 Ground level service center

 Ripper Hydraulics

 Vandalism, protection (8 caplocks)

Ether starting aid, automatic

 Alternator, 150 amp

 Back up alarm

 Batteries, 12-volt (4), 200 amp-hour

 Converters, 12-volt, 10 amp and 20 amp

 Diagnostic connector

 Horn, forward warning

 Lights, engine compartment

 Lighting system, five (5) HID/seven (7) Halogen

 Starting receptacle

 Advisor-electronic monitoring system

 Air conditioner and heater

 Armrest, adjustable

 Cab, FOPS

 Deactivation switch, hydraulic controls

 Decelerator, pedal

 Finger Tip Control (FTC) steering

 Governor switch, electronic

 Hydraulic system: – Electronically controlled for bulldozer and ripper control

 Mirror, rearview

 Radio ready, entertainment

 ROPS rollbar

 Seat belt, retractable 76 mm (3 in)

 Seat, cloth, air suspension

 Wipers, intermittent, low and high speeds

 C32 with ACERT Technology: – 24-volt electric start

 Aftercoolers, air-to-air

 Air filters, dual with precleaner

 Aluminum bar plate cooling system: – Serial number prefix: AMA and MDG

 Controlled throttle shifting

 Coolant, extended life

 Shift management

 Engine Idle Shutdown Timer

 Engine precleaner

 Ether starting aid, automatic

 Four planet, double-reduction planetary final drives

 Fuel priming pump, electric

 High speed oil changing system

 Hydraulic demand fan

 Mesabi radiator: – Serial number prefix: JEL and JNS

 Mufflers, dual

 Parking brake, electronic

 Prescreener

 Separator, water/fuel

 Thermal shields

 Torque divider

 Transmission, powershift: – (3F/3R speeds)

 Auto blade assist

 Enhanced auto shift

 Product Link (satellite)

 VIMS 3G

 Equalizer bar end pin grease fittings, remote

 Rollers and idlers, lifetime lubricated

 Sprocket rim segments, replaceable

 Suspension-type undercarriage, eight-roller tubular track roller frame

 Three bolt idler and roller caps

 Track adjusters, hydraulic

 Track guides

 Two-piece master links

 Anchorage points

 Fender guard rails

 Heavy duty steps and handles

 Operator not present monitoring system

 Slope and side-slope monitor

 Bottom guards

 CD ROM parts book

 Dual-tilt blade control

 Ecology drains

 Engine enclosure

 Fluid sampling ports

 Grade control ready

 Ground level service center

 Ripper Hydraulics

 Vandalism, protection (8 caplocks)

Four planet, double-reduction planetary final drives

 Alternator, 150 amp

 Back up alarm

 Batteries, 12-volt (4), 200 amp-hour

 Converters, 12-volt, 10 amp and 20 amp

 Diagnostic connector

 Horn, forward warning

 Lights, engine compartment

 Lighting system, five (5) HID/seven (7) Halogen

 Starting receptacle

 Advisor-electronic monitoring system

 Air conditioner and heater

 Armrest, adjustable

 Cab, FOPS

 Deactivation switch, hydraulic controls

 Decelerator, pedal

 Finger Tip Control (FTC) steering

 Governor switch, electronic

 Hydraulic system: – Electronically controlled for bulldozer and ripper control

 Mirror, rearview

 Radio ready, entertainment

 ROPS rollbar

 Seat belt, retractable 76 mm (3 in)

 Seat, cloth, air suspension

 Wipers, intermittent, low and high speeds

 C32 with ACERT Technology: – 24-volt electric start

 Aftercoolers, air-to-air

 Air filters, dual with precleaner

 Aluminum bar plate cooling system: – Serial number prefix: AMA and MDG

 Controlled throttle shifting

 Coolant, extended life

 Shift management

 Engine Idle Shutdown Timer

 Engine precleaner

 Ether starting aid, automatic

 Four planet, double-reduction planetary final drives

 Fuel priming pump, electric

 High speed oil changing system

 Hydraulic demand fan

 Mesabi radiator: – Serial number prefix: JEL and JNS

 Mufflers, dual

 Parking brake, electronic

 Prescreener

 Separator, water/fuel

 Thermal shields

 Torque divider

 Transmission, powershift: – (3F/3R speeds)

 Auto blade assist

 Enhanced auto shift

 Product Link (satellite)

 VIMS 3G

 Equalizer bar end pin grease fittings, remote

 Rollers and idlers, lifetime lubricated

 Sprocket rim segments, replaceable

 Suspension-type undercarriage, eight-roller tubular track roller frame

 Three bolt idler and roller caps

 Track adjusters, hydraulic

 Track guides

 Two-piece master links

 Anchorage points

 Fender guard rails

 Heavy duty steps and handles

 Operator not present monitoring system

 Slope and side-slope monitor

 Bottom guards

 CD ROM parts book

 Dual-tilt blade control

 Ecology drains

 Engine enclosure

 Fluid sampling ports

 Grade control ready

 Ground level service center

 Ripper Hydraulics

 Vandalism, protection (8 caplocks)

Fuel priming pump, electric

 Alternator, 150 amp

 Back up alarm

 Batteries, 12-volt (4), 200 amp-hour

 Converters, 12-volt, 10 amp and 20 amp

 Diagnostic connector

 Horn, forward warning

 Lights, engine compartment

 Lighting system, five (5) HID/seven (7) Halogen

 Starting receptacle

 Advisor-electronic monitoring system

 Air conditioner and heater

 Armrest, adjustable

 Cab, FOPS

 Deactivation switch, hydraulic controls

 Decelerator, pedal

 Finger Tip Control (FTC) steering

 Governor switch, electronic

 Hydraulic system: – Electronically controlled for bulldozer and ripper control

 Mirror, rearview

 Radio ready, entertainment

 ROPS rollbar

 Seat belt, retractable 76 mm (3 in)

 Seat, cloth, air suspension

 Wipers, intermittent, low and high speeds

 C32 with ACERT Technology: – 24-volt electric start

 Aftercoolers, air-to-air

 Air filters, dual with precleaner

 Aluminum bar plate cooling system: – Serial number prefix: AMA and MDG

 Controlled throttle shifting

 Coolant, extended life

 Shift management

 Engine Idle Shutdown Timer

 Engine precleaner

 Ether starting aid, automatic

 Four planet, double-reduction planetary final drives

 Fuel priming pump, electric

 High speed oil changing system

 Hydraulic demand fan

 Mesabi radiator: – Serial number prefix: JEL and JNS

 Mufflers, dual

 Parking brake, electronic

 Prescreener

 Separator, water/fuel

 Thermal shields

 Torque divider

 Transmission, powershift: – (3F/3R speeds)

 Auto blade assist

 Enhanced auto shift

 Product Link (satellite)

 VIMS 3G

 Equalizer bar end pin grease fittings, remote

 Rollers and idlers, lifetime lubricated

 Sprocket rim segments, replaceable

 Suspension-type undercarriage, eight-roller tubular track roller frame

 Three bolt idler and roller caps

 Track adjusters, hydraulic

 Track guides

 Two-piece master links

 Anchorage points

 Fender guard rails

 Heavy duty steps and handles

 Operator not present monitoring system

 Slope and side-slope monitor

 Bottom guards

 CD ROM parts book

 Dual-tilt blade control

 Ecology drains

 Engine enclosure

 Fluid sampling ports

 Grade control ready

 Ground level service center

 Ripper Hydraulics

 Vandalism, protection (8 caplocks)

High speed oil changing system

 Alternator, 150 amp

 Back up alarm

 Batteries, 12-volt (4), 200 amp-hour

 Converters, 12-volt, 10 amp and 20 amp

 Diagnostic connector

 Horn, forward warning

 Lights, engine compartment

 Lighting system, five (5) HID/seven (7) Halogen

 Starting receptacle

 Advisor-electronic monitoring system

 Air conditioner and heater

 Armrest, adjustable

 Cab, FOPS

 Deactivation switch, hydraulic controls

 Decelerator, pedal

 Finger Tip Control (FTC) steering

 Governor switch, electronic

 Hydraulic system: – Electronically controlled for bulldozer and ripper control

 Mirror, rearview

 Radio ready, entertainment

 ROPS rollbar

 Seat belt, retractable 76 mm (3 in)

 Seat, cloth, air suspension

 Wipers, intermittent, low and high speeds

 C32 with ACERT Technology: – 24-volt electric start

 Aftercoolers, air-to-air

 Air filters, dual with precleaner

 Aluminum bar plate cooling system: – Serial number prefix: AMA and MDG

 Controlled throttle shifting

 Coolant, extended life

 Shift management

 Engine Idle Shutdown Timer

 Engine precleaner

 Ether starting aid, automatic

 Four planet, double-reduction planetary final drives

 Fuel priming pump, electric

 High speed oil changing system

 Hydraulic demand fan

 Mesabi radiator: – Serial number prefix: JEL and JNS

 Mufflers, dual

 Parking brake, electronic

 Prescreener

 Separator, water/fuel

 Thermal shields

 Torque divider

 Transmission, powershift: – (3F/3R speeds)

 Auto blade assist

 Enhanced auto shift

 Product Link (satellite)

 VIMS 3G

 Equalizer bar end pin grease fittings, remote

 Rollers and idlers, lifetime lubricated

 Sprocket rim segments, replaceable

 Suspension-type undercarriage, eight-roller tubular track roller frame

 Three bolt idler and roller caps

 Track adjusters, hydraulic

 Track guides

 Two-piece master links

 Anchorage points

 Fender guard rails

 Heavy duty steps and handles

 Operator not present monitoring system

 Slope and side-slope monitor

 Bottom guards

 CD ROM parts book

 Dual-tilt blade control

 Ecology drains

 Engine enclosure

 Fluid sampling ports

 Grade control ready

 Ground level service center

 Ripper Hydraulics

 Vandalism, protection (8 caplocks)

Hydraulic demand fan

 Alternator, 150 amp

 Back up alarm

 Batteries, 12-volt (4), 200 amp-hour

 Converters, 12-volt, 10 amp and 20 amp

 Diagnostic connector

 Horn, forward warning

 Lights, engine compartment

 Lighting system, five (5) HID/seven (7) Halogen

 Starting receptacle

 Advisor-electronic monitoring system

 Air conditioner and heater

 Armrest, adjustable

 Cab, FOPS

 Deactivation switch, hydraulic controls

 Decelerator, pedal

 Finger Tip Control (FTC) steering

 Governor switch, electronic

 Hydraulic system: – Electronically controlled for bulldozer and ripper control

 Mirror, rearview

 Radio ready, entertainment

 ROPS rollbar

 Seat belt, retractable 76 mm (3 in)

 Seat, cloth, air suspension

 Wipers, intermittent, low and high speeds

 C32 with ACERT Technology: – 24-volt electric start

 Aftercoolers, air-to-air

 Air filters, dual with precleaner

 Aluminum bar plate cooling system: – Serial number prefix: AMA and MDG

 Controlled throttle shifting

 Coolant, extended life

 Shift management

 Engine Idle Shutdown Timer

 Engine precleaner

 Ether starting aid, automatic

 Four planet, double-reduction planetary final drives

 Fuel priming pump, electric

 High speed oil changing system

 Hydraulic demand fan

 Mesabi radiator: – Serial number prefix: JEL and JNS

 Mufflers, dual

 Parking brake, electronic

 Prescreener

 Separator, water/fuel

 Thermal shields

 Torque divider

 Transmission, powershift: – (3F/3R speeds)

 Auto blade assist

 Enhanced auto shift

 Product Link (satellite)

 VIMS 3G

 Equalizer bar end pin grease fittings, remote

 Rollers and idlers, lifetime lubricated

 Sprocket rim segments, replaceable

 Suspension-type undercarriage, eight-roller tubular track roller frame

 Three bolt idler and roller caps

 Track adjusters, hydraulic

 Track guides

 Two-piece master links

 Anchorage points

 Fender guard rails

 Heavy duty steps and handles

 Operator not present monitoring system

 Slope and side-slope monitor

 Bottom guards

 CD ROM parts book

 Dual-tilt blade control

 Ecology drains

 Engine enclosure

 Fluid sampling ports

 Grade control ready

 Ground level service center

 Ripper Hydraulics

 Vandalism, protection (8 caplocks)

Mesabi radiator: – Serial number prefix: JEL and JNS

 Alternator, 150 amp

 Back up alarm

 Batteries, 12-volt (4), 200 amp-hour

 Converters, 12-volt, 10 amp and 20 amp

 Diagnostic connector

 Horn, forward warning

 Lights, engine compartment

 Lighting system, five (5) HID/seven (7) Halogen

 Starting receptacle

 Advisor-electronic monitoring system

 Air conditioner and heater

 Armrest, adjustable

 Cab, FOPS

 Deactivation switch, hydraulic controls

 Decelerator, pedal

 Finger Tip Control (FTC) steering

 Governor switch, electronic

 Hydraulic system: – Electronically controlled for bulldozer and ripper control

 Mirror, rearview

 Radio ready, entertainment

 ROPS rollbar

 Seat belt, retractable 76 mm (3 in)

 Seat, cloth, air suspension

 Wipers, intermittent, low and high speeds

 C32 with ACERT Technology: – 24-volt electric start

 Aftercoolers, air-to-air

 Air filters, dual with precleaner

 Aluminum bar plate cooling system: – Serial number prefix: AMA and MDG

 Controlled throttle shifting

 Coolant, extended life

 Shift management

 Engine Idle Shutdown Timer

 Engine precleaner

 Ether starting aid, automatic

 Four planet, double-reduction planetary final drives

 Fuel priming pump, electric

 High speed oil changing system

 Hydraulic demand fan

 Mesabi radiator: – Serial number prefix: JEL and JNS

 Mufflers, dual

 Parking brake, electronic

 Prescreener

 Separator, water/fuel

 Thermal shields

 Torque divider

 Transmission, powershift: – (3F/3R speeds)

 Auto blade assist

 Enhanced auto shift

 Product Link (satellite)

 VIMS 3G

 Equalizer bar end pin grease fittings, remote

 Rollers and idlers, lifetime lubricated

 Sprocket rim segments, replaceable

 Suspension-type undercarriage, eight-roller tubular track roller frame

 Three bolt idler and roller caps

 Track adjusters, hydraulic

 Track guides

 Two-piece master links

 Anchorage points

 Fender guard rails

 Heavy duty steps and handles

 Operator not present monitoring system

 Slope and side-slope monitor

 Bottom guards

 CD ROM parts book

 Dual-tilt blade control

 Ecology drains

 Engine enclosure

 Fluid sampling ports

 Grade control ready

 Ground level service center

 Ripper Hydraulics

 Vandalism, protection (8 caplocks)

Mufflers, dual

 Alternator, 150 amp

 Back up alarm

 Batteries, 12-volt (4), 200 amp-hour

 Converters, 12-volt, 10 amp and 20 amp

 Diagnostic connector

 Horn, forward warning

 Lights, engine compartment

 Lighting system, five (5) HID/seven (7) Halogen

 Starting receptacle

 Advisor-electronic monitoring system

 Air conditioner and heater

 Armrest, adjustable

 Cab, FOPS

 Deactivation switch, hydraulic controls

 Decelerator, pedal

 Finger Tip Control (FTC) steering

 Governor switch, electronic

 Hydraulic system: – Electronically controlled for bulldozer and ripper control

 Mirror, rearview

 Radio ready, entertainment

 ROPS rollbar

 Seat belt, retractable 76 mm (3 in)

 Seat, cloth, air suspension

 Wipers, intermittent, low and high speeds

 C32 with ACERT Technology: – 24-volt electric start

 Aftercoolers, air-to-air

 Air filters, dual with precleaner

 Aluminum bar plate cooling system: – Serial number prefix: AMA and MDG

 Controlled throttle shifting

 Coolant, extended life

 Shift management

 Engine Idle Shutdown Timer

 Engine precleaner

 Ether starting aid, automatic

 Four planet, double-reduction planetary final drives

 Fuel priming pump, electric

 High speed oil changing system

 Hydraulic demand fan

 Mesabi radiator: – Serial number prefix: JEL and JNS

 Mufflers, dual

 Parking brake, electronic

 Prescreener

 Separator, water/fuel

 Thermal shields

 Torque divider

 Transmission, powershift: – (3F/3R speeds)

 Auto blade assist

 Enhanced auto shift

 Product Link (satellite)

 VIMS 3G

 Equalizer bar end pin grease fittings, remote

 Rollers and idlers, lifetime lubricated

 Sprocket rim segments, replaceable

 Suspension-type undercarriage, eight-roller tubular track roller frame

 Three bolt idler and roller caps

 Track adjusters, hydraulic

 Track guides

 Two-piece master links

 Anchorage points

 Fender guard rails

 Heavy duty steps and handles

 Operator not present monitoring system

 Slope and side-slope monitor

 Bottom guards

 CD ROM parts book

 Dual-tilt blade control

 Ecology drains

 Engine enclosure

 Fluid sampling ports

 Grade control ready

 Ground level service center

 Ripper Hydraulics

 Vandalism, protection (8 caplocks)

Parking brake, electronic

 Alternator, 150 amp

 Back up alarm

 Batteries, 12-volt (4), 200 amp-hour

 Converters, 12-volt, 10 amp and 20 amp

 Diagnostic connector

 Horn, forward warning

 Lights, engine compartment

 Lighting system, five (5) HID/seven (7) Halogen

 Starting receptacle

 Advisor-electronic monitoring system

 Air conditioner and heater

 Armrest, adjustable

 Cab, FOPS

 Deactivation switch, hydraulic controls

 Decelerator, pedal

 Finger Tip Control (FTC) steering

 Governor switch, electronic

 Hydraulic system: – Electronically controlled for bulldozer and ripper control

 Mirror, rearview

 Radio ready, entertainment

 ROPS rollbar

 Seat belt, retractable 76 mm (3 in)

 Seat, cloth, air suspension

 Wipers, intermittent, low and high speeds

 C32 with ACERT Technology: – 24-volt electric start

 Aftercoolers, air-to-air

 Air filters, dual with precleaner

 Aluminum bar plate cooling system: – Serial number prefix: AMA and MDG

 Controlled throttle shifting

 Coolant, extended life

 Shift management

 Engine Idle Shutdown Timer

 Engine precleaner

 Ether starting aid, automatic

 Four planet, double-reduction planetary final drives

 Fuel priming pump, electric

 High speed oil changing system

 Hydraulic demand fan

 Mesabi radiator: – Serial number prefix: JEL and JNS

 Mufflers, dual

 Parking brake, electronic

 Prescreener

 Separator, water/fuel

 Thermal shields

 Torque divider

 Transmission, powershift: – (3F/3R speeds)

 Auto blade assist

 Enhanced auto shift

 Product Link (satellite)

 VIMS 3G

 Equalizer bar end pin grease fittings, remote

 Rollers and idlers, lifetime lubricated

 Sprocket rim segments, replaceable

 Suspension-type undercarriage, eight-roller tubular track roller frame

 Three bolt idler and roller caps

 Track adjusters, hydraulic

 Track guides

 Two-piece master links

 Anchorage points

 Fender guard rails

 Heavy duty steps and handles

 Operator not present monitoring system

 Slope and side-slope monitor

 Bottom guards

 CD ROM parts book

 Dual-tilt blade control

 Ecology drains

 Engine enclosure

 Fluid sampling ports

 Grade control ready

 Ground level service center

 Ripper Hydraulics

 Vandalism, protection (8 caplocks)

Prescreener

 Alternator, 150 amp

 Back up alarm

 Batteries, 12-volt (4), 200 amp-hour

 Converters, 12-volt, 10 amp and 20 amp

 Diagnostic connector

 Horn, forward warning

 Lights, engine compartment

 Lighting system, five (5) HID/seven (7) Halogen

 Starting receptacle

 Advisor-electronic monitoring system

 Air conditioner and heater

 Armrest, adjustable

 Cab, FOPS

 Deactivation switch, hydraulic controls

 Decelerator, pedal

 Finger Tip Control (FTC) steering

 Governor switch, electronic

 Hydraulic system: – Electronically controlled for bulldozer and ripper control

 Mirror, rearview

 Radio ready, entertainment

 ROPS rollbar

 Seat belt, retractable 76 mm (3 in)

 Seat, cloth, air suspension

 Wipers, intermittent, low and high speeds

 C32 with ACERT Technology: – 24-volt electric start

 Aftercoolers, air-to-air

 Air filters, dual with precleaner

 Aluminum bar plate cooling system: – Serial number prefix: AMA and MDG

 Controlled throttle shifting

 Coolant, extended life

 Shift management

 Engine Idle Shutdown Timer

 Engine precleaner

 Ether starting aid, automatic

 Four planet, double-reduction planetary final drives

 Fuel priming pump, electric

 High speed oil changing system

 Hydraulic demand fan

 Mesabi radiator: – Serial number prefix: JEL and JNS

 Mufflers, dual

 Parking brake, electronic

 Prescreener

 Separator, water/fuel

 Thermal shields

 Torque divider

 Transmission, powershift: – (3F/3R speeds)

 Auto blade assist

 Enhanced auto shift

 Product Link (satellite)

 VIMS 3G

 Equalizer bar end pin grease fittings, remote

 Rollers and idlers, lifetime lubricated

 Sprocket rim segments, replaceable

 Suspension-type undercarriage, eight-roller tubular track roller frame

 Three bolt idler and roller caps

 Track adjusters, hydraulic

 Track guides

 Two-piece master links

 Anchorage points

 Fender guard rails

 Heavy duty steps and handles

 Operator not present monitoring system

 Slope and side-slope monitor

 Bottom guards

 CD ROM parts book

 Dual-tilt blade control

 Ecology drains

 Engine enclosure

 Fluid sampling ports

 Grade control ready

 Ground level service center

 Ripper Hydraulics

 Vandalism, protection (8 caplocks)

Separator, water/fuel

 Alternator, 150 amp

 Back up alarm

 Batteries, 12-volt (4), 200 amp-hour

 Converters, 12-volt, 10 amp and 20 amp

 Diagnostic connector

 Horn, forward warning

 Lights, engine compartment

 Lighting system, five (5) HID/seven (7) Halogen

 Starting receptacle

 Advisor-electronic monitoring system

 Air conditioner and heater

 Armrest, adjustable

 Cab, FOPS

 Deactivation switch, hydraulic controls

 Decelerator, pedal

 Finger Tip Control (FTC) steering

 Governor switch, electronic

 Hydraulic system: – Electronically controlled for bulldozer and ripper control

 Mirror, rearview

 Radio ready, entertainment

 ROPS rollbar

 Seat belt, retractable 76 mm (3 in)

 Seat, cloth, air suspension

 Wipers, intermittent, low and high speeds

 C32 with ACERT Technology: – 24-volt electric start

 Aftercoolers, air-to-air

 Air filters, dual with precleaner

 Aluminum bar plate cooling system: – Serial number prefix: AMA and MDG

 Controlled throttle shifting

 Coolant, extended life

 Shift management

 Engine Idle Shutdown Timer

 Engine precleaner

 Ether starting aid, automatic

 Four planet, double-reduction planetary final drives

 Fuel priming pump, electric

 High speed oil changing system

 Hydraulic demand fan

 Mesabi radiator: – Serial number prefix: JEL and JNS

 Mufflers, dual

 Parking brake, electronic

 Prescreener

 Separator, water/fuel

 Thermal shields

 Torque divider

 Transmission, powershift: – (3F/3R speeds)

 Auto blade assist

 Enhanced auto shift

 Product Link (satellite)

 VIMS 3G

 Equalizer bar end pin grease fittings, remote

 Rollers and idlers, lifetime lubricated

 Sprocket rim segments, replaceable

 Suspension-type undercarriage, eight-roller tubular track roller frame

 Three bolt idler and roller caps

 Track adjusters, hydraulic

 Track guides

 Two-piece master links

 Anchorage points

 Fender guard rails

 Heavy duty steps and handles

 Operator not present monitoring system

 Slope and side-slope monitor

 Bottom guards

 CD ROM parts book

 Dual-tilt blade control

 Ecology drains

 Engine enclosure

 Fluid sampling ports

 Grade control ready

 Ground level service center

 Ripper Hydraulics

 Vandalism, protection (8 caplocks)

Thermal shields

 Alternator, 150 amp

 Back up alarm

 Batteries, 12-volt (4), 200 amp-hour

 Converters, 12-volt, 10 amp and 20 amp

 Diagnostic connector

 Horn, forward warning

 Lights, engine compartment

 Lighting system, five (5) HID/seven (7) Halogen

 Starting receptacle

 Advisor-electronic monitoring system

 Air conditioner and heater

 Armrest, adjustable

 Cab, FOPS

 Deactivation switch, hydraulic controls

 Decelerator, pedal

 Finger Tip Control (FTC) steering

 Governor switch, electronic

 Hydraulic system: – Electronically controlled for bulldozer and ripper control

 Mirror, rearview

 Radio ready, entertainment

 ROPS rollbar

 Seat belt, retractable 76 mm (3 in)

 Seat, cloth, air suspension

 Wipers, intermittent, low and high speeds

 C32 with ACERT Technology: – 24-volt electric start

 Aftercoolers, air-to-air

 Air filters, dual with precleaner

 Aluminum bar plate cooling system: – Serial number prefix: AMA and MDG

 Controlled throttle shifting

 Coolant, extended life

 Shift management

 Engine Idle Shutdown Timer

 Engine precleaner

 Ether starting aid, automatic

 Four planet, double-reduction planetary final drives

 Fuel priming pump, electric

 High speed oil changing system

 Hydraulic demand fan

 Mesabi radiator: – Serial number prefix: JEL and JNS

 Mufflers, dual

 Parking brake, electronic

 Prescreener

 Separator, water/fuel

 Thermal shields

 Torque divider

 Transmission, powershift: – (3F/3R speeds)

 Auto blade assist

 Enhanced auto shift

 Product Link (satellite)

 VIMS 3G

 Equalizer bar end pin grease fittings, remote

 Rollers and idlers, lifetime lubricated

 Sprocket rim segments, replaceable

 Suspension-type undercarriage, eight-roller tubular track roller frame

 Three bolt idler and roller caps

 Track adjusters, hydraulic

 Track guides

 Two-piece master links

 Anchorage points

 Fender guard rails

 Heavy duty steps and handles

 Operator not present monitoring system

 Slope and side-slope monitor

 Bottom guards

 CD ROM parts book

 Dual-tilt blade control

 Ecology drains

 Engine enclosure

 Fluid sampling ports

 Grade control ready

 Ground level service center

 Ripper Hydraulics

 Vandalism, protection (8 caplocks)

Torque divider

 Alternator, 150 amp

 Back up alarm

 Batteries, 12-volt (4), 200 amp-hour

 Converters, 12-volt, 10 amp and 20 amp

 Diagnostic connector

 Horn, forward warning

 Lights, engine compartment

 Lighting system, five (5) HID/seven (7) Halogen

 Starting receptacle

 Advisor-electronic monitoring system

 Air conditioner and heater

 Armrest, adjustable

 Cab, FOPS

 Deactivation switch, hydraulic controls

 Decelerator, pedal

 Finger Tip Control (FTC) steering

 Governor switch, electronic

 Hydraulic system: – Electronically controlled for bulldozer and ripper control

 Mirror, rearview

 Radio ready, entertainment

 ROPS rollbar

 Seat belt, retractable 76 mm (3 in)

 Seat, cloth, air suspension

 Wipers, intermittent, low and high speeds

 C32 with ACERT Technology: – 24-volt electric start

 Aftercoolers, air-to-air

 Air filters, dual with precleaner

 Aluminum bar plate cooling system: – Serial number prefix: AMA and MDG

 Controlled throttle shifting

 Coolant, extended life

 Shift management

 Engine Idle Shutdown Timer

 Engine precleaner

 Ether starting aid, automatic

 Four planet, double-reduction planetary final drives

 Fuel priming pump, electric

 High speed oil changing system

 Hydraulic demand fan

 Mesabi radiator: – Serial number prefix: JEL and JNS

 Mufflers, dual

 Parking brake, electronic

 Prescreener

 Separator, water/fuel

 Thermal shields

 Torque divider

 Transmission, powershift: – (3F/3R speeds)

 Auto blade assist

 Enhanced auto shift

 Product Link (satellite)

 VIMS 3G

 Equalizer bar end pin grease fittings, remote

 Rollers and idlers, lifetime lubricated

 Sprocket rim segments, replaceable

 Suspension-type undercarriage, eight-roller tubular track roller frame

 Three bolt idler and roller caps

 Track adjusters, hydraulic

 Track guides

 Two-piece master links

 Anchorage points

 Fender guard rails

 Heavy duty steps and handles

 Operator not present monitoring system

 Slope and side-slope monitor

 Bottom guards

 CD ROM parts book

 Dual-tilt blade control

 Ecology drains

 Engine enclosure

 Fluid sampling ports

 Grade control ready

 Ground level service center

 Ripper Hydraulics

 Vandalism, protection (8 caplocks)

Transmission, powershift: – (3F/3R speeds)

 Alternator, 150 amp

 Back up alarm

 Batteries, 12-volt (4), 200 amp-hour

 Converters, 12-volt, 10 amp and 20 amp

 Diagnostic connector

 Horn, forward warning

 Lights, engine compartment

 Lighting system, five (5) HID/seven (7) Halogen

 Starting receptacle

 Advisor-electronic monitoring system

 Air conditioner and heater

 Armrest, adjustable

 Cab, FOPS

 Deactivation switch, hydraulic controls

 Decelerator, pedal

 Finger Tip Control (FTC) steering

 Governor switch, electronic

 Hydraulic system: – Electronically controlled for bulldozer and ripper control

 Mirror, rearview

 Radio ready, entertainment

 ROPS rollbar

 Seat belt, retractable 76 mm (3 in)

 Seat, cloth, air suspension

 Wipers, intermittent, low and high speeds

 C32 with ACERT Technology: – 24-volt electric start

 Aftercoolers, air-to-air

 Air filters, dual with precleaner

 Aluminum bar plate cooling system: – Serial number prefix: AMA and MDG

 Controlled throttle shifting

 Coolant, extended life

 Shift management

 Engine Idle Shutdown Timer

 Engine precleaner

 Ether starting aid, automatic

 Four planet, double-reduction planetary final drives

 Fuel priming pump, electric

 High speed oil changing system

 Hydraulic demand fan

 Mesabi radiator: – Serial number prefix: JEL and JNS

 Mufflers, dual

 Parking brake, electronic

 Prescreener

 Separator, water/fuel

 Thermal shields

 Torque divider

 Transmission, powershift: – (3F/3R speeds)

 Auto blade assist

 Enhanced auto shift

 Product Link (satellite)

 VIMS 3G

 Equalizer bar end pin grease fittings, remote

 Rollers and idlers, lifetime lubricated

 Sprocket rim segments, replaceable

 Suspension-type undercarriage, eight-roller tubular track roller frame

 Three bolt idler and roller caps

 Track adjusters, hydraulic

 Track guides

 Two-piece master links

 Anchorage points

 Fender guard rails

 Heavy duty steps and handles

 Operator not present monitoring system

 Slope and side-slope monitor

 Bottom guards

 CD ROM parts book

 Dual-tilt blade control

 Ecology drains

 Engine enclosure

 Fluid sampling ports

 Grade control ready

 Ground level service center

 Ripper Hydraulics

 Vandalism, protection (8 caplocks)

TECHNOLOGY

 Auto blade assist

 Enhanced auto shift

 Product Link (satellite)

 VIMS 3G

UNDERCARRIAGE

 Equalizer bar end pin grease fittings, remote

 Rollers and idlers, lifetime lubricated

 Sprocket rim segments, replaceable

 Suspension-type undercarriage, eight-roller tubular track roller frame

 Three bolt idler and roller caps

 Track adjusters, hydraulic

 Track guides

 Two-piece master links

SAFETY AND SECURITY

 Anchorage points

 Fender guard rails

 Heavy duty steps and handles

 Operator not present monitoring system

 Slope and side-slope monitor

Anchorage points

 Alternator, 150 amp

 Back up alarm

 Batteries, 12-volt (4), 200 amp-hour

 Converters, 12-volt, 10 amp and 20 amp

 Diagnostic connector

 Horn, forward warning

 Lights, engine compartment

 Lighting system, five (5) HID/seven (7) Halogen

 Starting receptacle

 Advisor-electronic monitoring system

 Air conditioner and heater

 Armrest, adjustable

 Cab, FOPS

 Deactivation switch, hydraulic controls

 Decelerator, pedal

 Finger Tip Control (FTC) steering

 Governor switch, electronic

 Hydraulic system: – Electronically controlled for bulldozer and ripper control

 Mirror, rearview

 Radio ready, entertainment

 ROPS rollbar

 Seat belt, retractable 76 mm (3 in)

 Seat, cloth, air suspension

 Wipers, intermittent, low and high speeds

 C32 with ACERT Technology: – 24-volt electric start

 Aftercoolers, air-to-air

 Air filters, dual with precleaner

 Aluminum bar plate cooling system: – Serial number prefix: AMA and MDG

 Controlled throttle shifting

 Coolant, extended life

 Shift management

 Engine Idle Shutdown Timer

 Engine precleaner

 Ether starting aid, automatic

 Four planet, double-reduction planetary final drives

 Fuel priming pump, electric

 High speed oil changing system

 Hydraulic demand fan

 Mesabi radiator: – Serial number prefix: JEL and JNS

 Mufflers, dual

 Parking brake, electronic

 Prescreener

 Separator, water/fuel

 Thermal shields

 Torque divider

 Transmission, powershift: – (3F/3R speeds)

 Auto blade assist

 Enhanced auto shift

 Product Link (satellite)

 VIMS 3G

 Equalizer bar end pin grease fittings, remote

 Rollers and idlers, lifetime lubricated

 Sprocket rim segments, replaceable

 Suspension-type undercarriage, eight-roller tubular track roller frame

 Three bolt idler and roller caps

 Track adjusters, hydraulic

 Track guides

 Two-piece master links

 Anchorage points

 Fender guard rails

 Heavy duty steps and handles

 Operator not present monitoring system

 Slope and side-slope monitor

 Bottom guards

 CD ROM parts book

 Dual-tilt blade control

 Ecology drains

 Engine enclosure

 Fluid sampling ports

 Grade control ready

 Ground level service center

 Ripper Hydraulics

 Vandalism, protection (8 caplocks)

Fender guard rails

 Alternator, 150 amp

 Back up alarm

 Batteries, 12-volt (4), 200 amp-hour

 Converters, 12-volt, 10 amp and 20 amp

 Diagnostic connector

 Horn, forward warning

 Lights, engine compartment

 Lighting system, five (5) HID/seven (7) Halogen

 Starting receptacle

 Advisor-electronic monitoring system

 Air conditioner and heater

 Armrest, adjustable

 Cab, FOPS

 Deactivation switch, hydraulic controls

 Decelerator, pedal

 Finger Tip Control (FTC) steering

 Governor switch, electronic

 Hydraulic system: – Electronically controlled for bulldozer and ripper control

 Mirror, rearview

 Radio ready, entertainment

 ROPS rollbar

 Seat belt, retractable 76 mm (3 in)

 Seat, cloth, air suspension

 Wipers, intermittent, low and high speeds

 C32 with ACERT Technology: – 24-volt electric start

 Aftercoolers, air-to-air

 Air filters, dual with precleaner

 Aluminum bar plate cooling system: – Serial number prefix: AMA and MDG

 Controlled throttle shifting

 Coolant, extended life

 Shift management

 Engine Idle Shutdown Timer

 Engine precleaner

 Ether starting aid, automatic

 Four planet, double-reduction planetary final drives

 Fuel priming pump, electric

 High speed oil changing system

 Hydraulic demand fan

 Mesabi radiator: – Serial number prefix: JEL and JNS

 Mufflers, dual

 Parking brake, electronic

 Prescreener

 Separator, water/fuel

 Thermal shields

 Torque divider

 Transmission, powershift: – (3F/3R speeds)

 Auto blade assist

 Enhanced auto shift

 Product Link (satellite)

 VIMS 3G

 Equalizer bar end pin grease fittings, remote

 Rollers and idlers, lifetime lubricated

 Sprocket rim segments, replaceable

 Suspension-type undercarriage, eight-roller tubular track roller frame

 Three bolt idler and roller caps

 Track adjusters, hydraulic

 Track guides

 Two-piece master links

 Anchorage points

 Fender guard rails

 Heavy duty steps and handles

 Operator not present monitoring system

 Slope and side-slope monitor

 Bottom guards

 CD ROM parts book

 Dual-tilt blade control

 Ecology drains

 Engine enclosure

 Fluid sampling ports

 Grade control ready

 Ground level service center

 Ripper Hydraulics

 Vandalism, protection (8 caplocks)

Heavy duty steps and handles

 Alternator, 150 amp

 Back up alarm

 Batteries, 12-volt (4), 200 amp-hour

 Converters, 12-volt, 10 amp and 20 amp

 Diagnostic connector

 Horn, forward warning

 Lights, engine compartment

 Lighting system, five (5) HID/seven (7) Halogen

 Starting receptacle

 Advisor-electronic monitoring system

 Air conditioner and heater

 Armrest, adjustable

 Cab, FOPS

 Deactivation switch, hydraulic controls

 Decelerator, pedal

 Finger Tip Control (FTC) steering

 Governor switch, electronic

 Hydraulic system: – Electronically controlled for bulldozer and ripper control

 Mirror, rearview

 Radio ready, entertainment

 ROPS rollbar

 Seat belt, retractable 76 mm (3 in)

 Seat, cloth, air suspension

 Wipers, intermittent, low and high speeds

 C32 with ACERT Technology: – 24-volt electric start

 Aftercoolers, air-to-air

 Air filters, dual with precleaner

 Aluminum bar plate cooling system: – Serial number prefix: AMA and MDG

 Controlled throttle shifting

 Coolant, extended life

 Shift management

 Engine Idle Shutdown Timer

 Engine precleaner

 Ether starting aid, automatic

 Four planet, double-reduction planetary final drives

 Fuel priming pump, electric

 High speed oil changing system

 Hydraulic demand fan

 Mesabi radiator: – Serial number prefix: JEL and JNS

 Mufflers, dual

 Parking brake, electronic

 Prescreener

 Separator, water/fuel

 Thermal shields

 Torque divider

 Transmission, powershift: – (3F/3R speeds)

 Auto blade assist

 Enhanced auto shift

 Product Link (satellite)

 VIMS 3G

 Equalizer bar end pin grease fittings, remote

 Rollers and idlers, lifetime lubricated

 Sprocket rim segments, replaceable

 Suspension-type undercarriage, eight-roller tubular track roller frame

 Three bolt idler and roller caps

 Track adjusters, hydraulic

 Track guides

 Two-piece master links

 Anchorage points

 Fender guard rails

 Heavy duty steps and handles

 Operator not present monitoring system

 Slope and side-slope monitor

 Bottom guards

 CD ROM parts book

 Dual-tilt blade control

 Ecology drains

 Engine enclosure

 Fluid sampling ports

 Grade control ready

 Ground level service center

 Ripper Hydraulics

 Vandalism, protection (8 caplocks)

Operator not present monitoring system

 Alternator, 150 amp

 Back up alarm

 Batteries, 12-volt (4), 200 amp-hour

 Converters, 12-volt, 10 amp and 20 amp

 Diagnostic connector

 Horn, forward warning

 Lights, engine compartment

 Lighting system, five (5) HID/seven (7) Halogen

 Starting receptacle

 Advisor-electronic monitoring system

 Air conditioner and heater

 Armrest, adjustable

 Cab, FOPS

 Deactivation switch, hydraulic controls

 Decelerator, pedal

 Finger Tip Control (FTC) steering

 Governor switch, electronic

 Hydraulic system: – Electronically controlled for bulldozer and ripper control

 Mirror, rearview

 Radio ready, entertainment

 ROPS rollbar

 Seat belt, retractable 76 mm (3 in)

 Seat, cloth, air suspension

 Wipers, intermittent, low and high speeds

 C32 with ACERT Technology: – 24-volt electric start

 Aftercoolers, air-to-air

 Air filters, dual with precleaner

 Aluminum bar plate cooling system: – Serial number prefix: AMA and MDG

 Controlled throttle shifting

 Coolant, extended life

 Shift management

 Engine Idle Shutdown Timer

 Engine precleaner

 Ether starting aid, automatic

 Four planet, double-reduction planetary final drives

 Fuel priming pump, electric

 High speed oil changing system

 Hydraulic demand fan

 Mesabi radiator: – Serial number prefix: JEL and JNS

 Mufflers, dual

 Parking brake, electronic

 Prescreener

 Separator, water/fuel

 Thermal shields

 Torque divider

 Transmission, powershift: – (3F/3R speeds)

 Auto blade assist

 Enhanced auto shift

 Product Link (satellite)

 VIMS 3G

 Equalizer bar end pin grease fittings, remote

 Rollers and idlers, lifetime lubricated

 Sprocket rim segments, replaceable

 Suspension-type undercarriage, eight-roller tubular track roller frame

 Three bolt idler and roller caps

 Track adjusters, hydraulic

 Track guides

 Two-piece master links

 Anchorage points

 Fender guard rails

 Heavy duty steps and handles

 Operator not present monitoring system

 Slope and side-slope monitor

 Bottom guards

 CD ROM parts book

 Dual-tilt blade control

 Ecology drains

 Engine enclosure

 Fluid sampling ports

 Grade control ready

 Ground level service center

 Ripper Hydraulics

 Vandalism, protection (8 caplocks)

Slope and side-slope monitor

 Alternator, 150 amp

 Back up alarm

 Batteries, 12-volt (4), 200 amp-hour

 Converters, 12-volt, 10 amp and 20 amp

 Diagnostic connector

 Horn, forward warning

 Lights, engine compartment

 Lighting system, five (5) HID/seven (7) Halogen

 Starting receptacle

 Advisor-electronic monitoring system

 Air conditioner and heater

 Armrest, adjustable

 Cab, FOPS

 Deactivation switch, hydraulic controls

 Decelerator, pedal

 Finger Tip Control (FTC) steering

 Governor switch, electronic

 Hydraulic system: – Electronically controlled for bulldozer and ripper control

 Mirror, rearview

 Radio ready, entertainment

 ROPS rollbar

 Seat belt, retractable 76 mm (3 in)

 Seat, cloth, air suspension

 Wipers, intermittent, low and high speeds

 C32 with ACERT Technology: – 24-volt electric start

 Aftercoolers, air-to-air

 Air filters, dual with precleaner

 Aluminum bar plate cooling system: – Serial number prefix: AMA and MDG

 Controlled throttle shifting

 Coolant, extended life

 Shift management

 Engine Idle Shutdown Timer

 Engine precleaner

 Ether starting aid, automatic

 Four planet, double-reduction planetary final drives

 Fuel priming pump, electric

 High speed oil changing system

 Hydraulic demand fan

 Mesabi radiator: – Serial number prefix: JEL and JNS

 Mufflers, dual

 Parking brake, electronic

 Prescreener

 Separator, water/fuel

 Thermal shields

 Torque divider

 Transmission, powershift: – (3F/3R speeds)

 Auto blade assist

 Enhanced auto shift

 Product Link (satellite)

 VIMS 3G

 Equalizer bar end pin grease fittings, remote

 Rollers and idlers, lifetime lubricated

 Sprocket rim segments, replaceable

 Suspension-type undercarriage, eight-roller tubular track roller frame

 Three bolt idler and roller caps

 Track adjusters, hydraulic

 Track guides

 Two-piece master links

 Anchorage points

 Fender guard rails

 Heavy duty steps and handles

 Operator not present monitoring system

 Slope and side-slope monitor

 Bottom guards

 CD ROM parts book

 Dual-tilt blade control

 Ecology drains

 Engine enclosure

 Fluid sampling ports

 Grade control ready

 Ground level service center

 Ripper Hydraulics

 Vandalism, protection (8 caplocks)

OTHER STANDARD EQUIPMENT

 Bottom guards

 CD ROM parts book

 Dual-tilt blade control

 Ecology drains

 Engine enclosure

 Fluid sampling ports

 Grade control ready

 Ground level service center

 Ripper Hydraulics

 Vandalism, protection (8 caplocks)

ELECTRICAL

Alternator, 150 amp

Back up alarm

Batteries, 12-volt (4), 200 amp-hour

Converters, 12-volt, 10 amp and 20 amp

Diagnostic connector

Horn, forward warning

Lights, engine compartment

Lighting system, five (5) HID/seven (7) Halogen

Starting receptacle

OPERATOR ENVIRONMENT

Advisor-electronic monitoring system

Air conditioner and heater

Armrest, adjustable

Cab, FOPS

Deactivation switch, hydraulic controls

Decelerator, pedal

Finger Tip Control (FTC) steering

Governor switch, electronic

Hydraulic system: – Electronically controlled for bulldozer and ripper control

Mirror, rearview

Radio ready, entertainment

ROPS rollbar

Seat belt, retractable 76 mm (3 in)

Seat, cloth, air suspension

Wipers, intermittent, low and high speeds

POWER TRAIN

C32 with ACERT Technology: – 24-volt electric start

Aftercoolers, air-to-air

Air filters, dual with precleaner

Aluminum bar plate cooling system: – Serial number prefix: AMA and MDG

Controlled throttle shifting

Coolant, extended life

Shift management

Engine Idle Shutdown Timer

Engine precleaner

Ether starting aid, automatic

Four planet, double-reduction planetary final drives

Fuel priming pump, electric

High speed oil changing system

Hydraulic demand fan

Mesabi radiator: – Serial number prefix: JEL and JNS

Mufflers, dual

Parking brake, electronic

Prescreener

Separator, water/fuel

Thermal shields

Torque divider

Transmission, powershift: – (3F/3R speeds)

TECHNOLOGY

Auto blade assist

Enhanced auto shift

Product Link (satellite)

VIMS 3G

UNDERCARRIAGE

Equalizer bar end pin grease fittings, remote

Rollers and idlers, lifetime lubricated

Sprocket rim segments, replaceable

Suspension-type undercarriage, eight-roller tubular track roller frame

Three bolt idler and roller caps

Track adjusters, hydraulic

Track guides

Two-piece master links

SAFETY AND SECURITY

Anchorage points

Fender guard rails

Heavy duty steps and handles

Operator not present monitoring system

Slope and side-slope monitor

OTHER STANDARD EQUIPMENT

Bottom guards

CD ROM parts book

Dual-tilt blade control

Ecology drains

Engine enclosure

Fluid sampling ports

Grade control ready

Ground level service center

Ripper Hydraulics

Vandalism, protection (8 caplocks)

GUARDS

 Bottom guards, sealed

 Bottom guards, partial

 Guard, undercarriage idlers

 Screens, grill door

OPERATOR STATION

 Air conditioner: – Fender – ROPS

 Cab glass: – 276 kPa (40 psi) – Dual pane impact resistant

 Heated and ventilated seat

 Operator arrangement: – 5th percentile arrangement – Quick opening

 Powered precleaner

 Visibility arrangements (camera and mirrors): – Single camera – Dual camera – Mirrors

 Window shades

Air conditioner: – Fender – ROPS

Cab glass: – 276 kPa (40 psi) – Dual pane impact resistant

Heated and ventilated seat

Operator arrangement: – 5th percentile arrangement – Quick opening

Powered precleaner

Visibility arrangements (camera and mirrors): – Single camera – Dual camera – Mirrors

Window shades

POWER TRAIN

 Engine coolant, arctic

 Engine precleaner, turbine

 Engine prelube

 Fan arrangements: – Hydraulic screens – Reversing (Not available on D11T Carrydozer.) – Reversing with screens (Not available on D11T Carrydozer.)

 Final drives: – Clamshell guard

 High altitude arrangement (Not available on D11T Carrydozer.)

 Mesabi radiator: – Serial number prefix: AMA and MDG

 Remote power train and engine high speed oil change system located at the ground level service center

UNDERCARRIAGE

 Carrier rollers

 Carrier rollers – cold weather

 Tracks, PPR, sealed and lubricated: – 710 mm (28 in) Extreme Service (Not available on D11T Carrydozer.) – 710 mm (28 in) Extreme Service abrasion resistant material (Not available on D11T Carrydozer.) – 710 mm (28 in) Extreme Service tra

 Undercarriage arrangements: – Abrasion – Cold abrasion – Cold weather – Sound

BULLDOZER ATTACHMENTS

 11CD Abrasion resistant blade

 11CD No wear plate

 11SU Abrasion resistant blade (Not available on D11T Carrydozer.)

 11SU Abrasion resistant blade, black (Not available on D11T Carrydozer.)

 11SU No wear plate (Not available on D11T Carrydozer.)

 11U Abrasion resistant blade (Not available on D11T Carrydozer.)

 11U Abrasion resistant blade, black (Not available on D11T Carrydozer.)

 11U No wear plate (Not available on D11T Carrydozer.)

REAR ATTACHMENTS

 Counterweight, rear

 CapSure hammerless installation and positive retention system: – Single shank – Multi shank – Single shank deep

 Drawbar, rear (Not available on D11T Carrydozer.)

 Multi shank ripper: – Carrydozer – Leach Pad (Not available on D11T Carrydozer.) – Standard (Not available on D11T Carrydozer.)

 Ripper lube

 Single shank ripper: – Carrydozer/heavy – Push block (Not available on D11T Carrydozer.) – Standard (Not available on D11T Carrydozer.)

Counterweight, rear

CapSure hammerless installation and positive retention system: – Single shank – Multi shank – Single shank deep

Drawbar, rear (Not available on D11T Carrydozer.)

Multi shank ripper: – Carrydozer – Leach Pad (Not available on D11T Carrydozer.) – Standard (Not available on D11T Carrydozer.)

Ripper lube

Single shank ripper: – Carrydozer/heavy – Push block (Not available on D11T Carrydozer.) – Standard (Not available on D11T Carrydozer.)

TECHNOLOGY

 Command for Dozing (Installed by dealer.)

 Machine control, performance: – AutoCarry – Automatic ripper control

 Terrain for Grading: – With blade control

Command for Dozing (Installed by dealer.)

Machine control, performance: – AutoCarry – Automatic ripper control

Terrain for Grading: – With blade control

SAFETY AND SECURITY

 Access arrangement (ladder and platform)

 Fuel tank: – Platform ready – Extra capacity

 Lights: – LED – LED, high intensity – Warning, strobe

 Powered access ladder

 Rear access platform

OTHER ATTACHMENTS

 Automatic lubrication system

 Grease points, grouped

 Heater, engine coolant

 Heater, fuel

 Hydraulic lines, AutoCarry

 Hydraulic lines, screens

 Hydraulic lines, screens and AutoCarry

GUARDS

Bottom guards, sealed

Bottom guards, partial

Guard, undercarriage idlers

Screens, grill door

OPERATOR STATION

Air conditioner: – Fender – ROPS

Cab glass: – 276 kPa (40 psi) – Dual pane impact resistant

Heated and ventilated seat

Operator arrangement: – 5th percentile arrangement – Quick opening

Powered precleaner

Visibility arrangements (camera and mirrors): – Single camera – Dual camera – Mirrors

Window shades

POWER TRAIN

Engine coolant, arctic

Engine precleaner, turbine

Engine prelube

Fan arrangements: – Hydraulic screens – Reversing (Not available on D11T Carrydozer.) – Reversing with screens (Not available on D11T Carrydozer.)

Final drives: – Clamshell guard

High altitude arrangement (Not available on D11T Carrydozer.)

Mesabi radiator: – Serial number prefix: AMA and MDG

Remote power train and engine high speed oil change system located at the ground level service center

UNDERCARRIAGE

Carrier rollers

Carrier rollers – cold weather

Tracks, PPR, sealed and lubricated: – 710 mm (28 in) Extreme Service (Not available on D11T Carrydozer.) – 710 mm (28 in) Extreme Service abrasion resistant material (Not available on D11T Carrydozer.) – 710 mm (28 in) Extreme Service tra

Undercarriage arrangements: – Abrasion – Cold abrasion – Cold weather – Sound

BULLDOZER ATTACHMENTS

11CD Abrasion resistant blade

11CD No wear plate

11SU Abrasion resistant blade (Not available on D11T Carrydozer.)

11SU Abrasion resistant blade, black (Not available on D11T Carrydozer.)

11SU No wear plate (Not available on D11T Carrydozer.)

11U Abrasion resistant blade (Not available on D11T Carrydozer.)

11U Abrasion resistant blade, black (Not available on D11T Carrydozer.)

11U No wear plate (Not available on D11T Carrydozer.)

REAR ATTACHMENTS

Counterweight, rear

CapSure hammerless installation and positive retention system: – Single shank – Multi shank – Single shank deep

Drawbar, rear (Not available on D11T Carrydozer.)

Multi shank ripper: – Carrydozer – Leach Pad (Not available on D11T Carrydozer.) – Standard (Not available on D11T Carrydozer.)

Ripper lube

Single shank ripper: – Carrydozer/heavy – Push block (Not available on D11T Carrydozer.) – Standard (Not available on D11T Carrydozer.)

TECHNOLOGY

Command for Dozing (Installed by dealer.)

Machine control, performance: – AutoCarry – Automatic ripper control

Terrain for Grading: – With blade control

SAFETY AND SECURITY

Access arrangement (ladder and platform)

Fuel tank: – Platform ready – Extra capacity

Lights: – LED – LED, high intensity – Warning, strobe

Powered access ladder

Rear access platform

OTHER ATTACHMENTS

Automatic lubrication system

Grease points, grouped

Heater, engine coolant

Heater, fuel

Hydraulic lines, AutoCarry

Hydraulic lines, screens

Hydraulic lines, screens and AutoCarry