Engine

Engine Model	Cat® C15
Net Power - ISO 9249	405 hp
Stroke	171.4 mm
Gross Power	435 hp
Emissions	Meets U.S. EPA Tier 4 Final/EU Stage IV emission standards or meets U.S. EPA Tier 3/EU Stage IIIA equivalent emission standards
Displacement	15.2 l
Bore	137.2 mm

Transmission

Transmission Type

Planetengetriebe – Lastschaltgetriebe – ECPC (Electronic Clutch Pressure Control, Elektronische Kupplungsdrucksteuerung)

Axles

Front	Planetary – Fixed
Rear	Planetary – Oscillating
Oscillation Angle	±11°

Service Refill Capacities

Differential - Final Drives - Front	100 l
Fuel Tank	782 l
Differential - Final Drives - Rear	110 l
Transmission	66 l
Cooling System	116 l

Operating Specifications

Operating Weight

34004 kg

Dimensions (Approximate)

Height - Top of Hood	3204 mm
Height - Top of Cab	4100 mm
Wheel Base	3700 mm
Centerline of Rear Axle to Edge of Bumper	2830 mm
Height - Top of Exhaust Stack	4332 mm
Ground Clearance	441.4 mm
Centerline of Front Axle to Hitch	1850 mm

Hydraulic System

Cylinder, Double Acting - Tilt and Tip, Bore and Stroke	140 mm × 230 mm (5.5 in × 9.1 in)
Cylinders, Double Acting - Lift, Bore and Stroke	120 mm × 1070 mm (4.7 in × 42.1 in)

Hydraulic System - Steering

Steering System - Circuit	Double Acting – End Mounted
Steering System - Pump	Piston – Variable Displacement

Efficiency and Productivity

Delivering the efficiency and productivity you demand through integrated machine systems.

Efficiency with Autoshift

The Autoshift mode, when active, allows the machine to automatically upshift or downshift based on machine speed, optimizing performance and thus saving fuel. This feature can be easily enabled or disabled on the soft keypad.

Decelerator Pedal

The left pedal acts as a brake, transmission neutralizer and an engine decelerator to override the engine speed selected by the throttle lock. This enables the operator to slow down when the throttle lock is engaged and to return to throttle lock without pressing a resume or set button again. This aids in maneuvering around trucks, tractors or any other obstacle.

Steering and Transmission Integrated Control System (STIC™)

Experience maximum responsiveness and control with STIC that combines directional selection, gear selection and steering into a single lever.

• Simple side-to-side motion turns machine right or left, minimizing operator movements
• Easy to operate finger controlled gear selection
• Smoother, faster cycles help reduce operator fatigue through the use of low effort integrated controls

Steering System

Confident machine operation starts with precise machine control enabled by the 824K’s load sensing hydraulic steering system.

• Increase efficiency with our variable displacement piston pumps
• Achieve precise positioning for easy loading in tight areas with 43 degrees each way of steering articulation
• Enhance operator comfort with integrated steering and transmission control functions

Electro Hydraulic Controls

Operators increase productivity with our responsive implements feature.

• Operate comfortably through electronically controlled hydraulic cylinder stops
• Handle easy-to-use soft detent controls

Structures

Purpose-built from the ground up for the toughest conditions.

Robust Structures

Your bottom line is improved by highly durable structures that achieve multiple life cycles and withstand the toughest loading conditions.

• Full box-section rear frame resists torsional shock and twisting forces
• Heavy-duty steering cylinder mounts efficiently transmit steering loads into the frame
• Axle mounting has been optimized for increased structural integrity

Push Beam and Push Arm Dozer Arrangement

To ensure long life and reliability, solid one piece push beams are through-width, not merely attached to the side of the frame. In corner dozing, stresses are transferred and absorbed through a larger portion of the frame.

Power Train

Operate more efficiently with improved power and control.

Cat Planetary Powershift Transmission

Building your success begins with a best-in-class transmission.

• Consistent, smooth shifting and efficiency through integrated electronic controls that utilize Single Clutch Speed Shifting (SCSS).
• Long life and reliability through heat treat gear and metallurgy.
• Four forward and four reverse speeds to match your application.

Cat Torque Converter (TC) with Lock-up Clutch

• Eliminates TC losses while lowering system heat
• Improves travel speeds
• Increases fuel efficiency

Cat C15 ACERT Engine

The Cat C15 ACERT engine is built and tested to meet your most demanding applications. Two engine options are available that meet U.S. EPA Tier 4 Final/EU Stage IV emission standards or U.S. EPA Tier 3/EU Stage IIIA equivalent emission standards.

• Fully integrated electronic engine controls works in concert with the entire machine to make your fuel go farther.
• Use less fuel idling with Engine Idle Shutdown.
• Maximized durability with Delayed Engine Shutdown.

Operator Station

Best-in-class operator comfort and ergonomics.

Your operators can work more efficiently and stay comfortable with our customer-inspired cab features.

Entry and Exit

Enter and exit the cab easily and safely with these newly designed, ergonomic features.

• Fold up STIC steer/armrest
• Reduced access stairway angles
• Standard stairway lighting

Cat Comfort Series III Seat

Enhance comfort and help reduce operator fatigue with Cat Comfort Series III seat.

• Mid back design and extra thick, contoured cushions
• Air suspension system
• Easy-to-reach seat levers and controls for six way adjustments
• Seat-mounted implement pod and STIC steer that moves with the seat
• 76 mm (3 in) wide retractable seat belt

Control Panel

Ergonomic placement of switches and information display keep your operators comfortable all day every day.

• Large backlit membrane switches feature LED activation indicators
• Switches feature ISO symbols for quick function identification
• Two position rocker switch activates the electro hydraulic park brake

Environment

Your operator’s productivity is enhanced with our clean, comfortable cab environment.

• Experience reduced vibrations from isolation cab mounts and seat air suspension.
• Maintain desired cab temperature with automatic temperature controls.
• Pressurized cab with filtered air
• Reduced sound levels
• Convenient floor storage tray/lunch box

Integrated Technologies

Monitor, manage, and enhance your job site operations

Cat Connect makes smart use of technology and services to improve your job site efficiency. Using the data from technology-equipped machines, you’ll get more information and insight into your equipment and operations than ever before. Cat Connect technologies offer improvements in these key areas: Equipment Management – increase uptime and reduce operating costs. Safety – enhance job site awareness to keep your people and equipment safe.

LINK Technologies

LINK technologies like Product Link™ wirelessly connect you to your equipment, giving you valuable insight into how your machine or fleet is performing. Track location, hours, fuel usage, idle time, and event codes through the online VisionLink® interface so you can make timely, fact-based decisions that can boost job site efficiency and productivity, and lower operating costs. VIMS™ data, like events, histograms, and historical trends, can be downloaded for analysis, giving you the information you need to proactively maintain fleet health and optimize performance and uptime.

DETECT Technologies

DETECT technologies like the rear-vision camera enhance awareness by expanding your view of the environment around working equipment so you can work at peak potential, with confidence.

Serviceability

Enabling high uptime by reducing your service time.

We can help you succeed by ensuring your 824K has design features to reduce your downtime.

• Safe and convenient service with ground level or platform access and grouped service points.
• Swing-out doors on both sides of the engine compartment provide easy access to important daily service checks.
• Ecology drains for ease of service and prevention of spilling potential environmental contaminants.
• Reduce downtime with VIMS system notifications so your operators and technicians can resolve any problems before failure.
• Quick visual inspection and minimize fluid contamination with sight gauges.
• Swing out fuel, hydraulic oil coolers and condenser for easy access cleanout.
• Ground level power service center with electrical disconnect, emergency engine shutdown, and stairway light switch.
• Optional tire pressure monitoring system provides real time information to the operator in the cab, ensuring proper inflation and optimizing tire life.
• Lighting inside the engine compartment improves visibility to service points.

Customer Support

Your Cat dealers know how to keep your machines productive.

Legendary Cat Dealer Support

A valued partner, your Cat dealer is available whenever you need them.

• Preventive maintenance programs and guaranteed maintenance contracts
• Best-in-class parts availability
• Improve your efficiency with operator training
• Genuine Cat Remanufactured parts

Safety

Making your safety our priority.

We are constantly improving our products in an effort to provide a safe work environment for the operator and those who work on your job site.

Machine Access

• Left and right hand stairs are angled to enhance safety for operators getting on and off the 824K.
• Continuous pass-through with handrails and non-skid surfaces with toe kicks are designed into the service areas.
• Maintain three points of contact at all times through ground level or platform accessible service areas.

Visibility

• Optional rearview camera with in-cab monitor increases operator awareness around the machine.
• Standard cab mounted LED warning strobes

Operator Environment

• Reduced vibrations to the operator with isolated cab mounts and seat mounted implement and steering controls.
• Low interior sound levels
• Pressurized cab with filtered air
• Standard 76 mm (3 in) seat belts on the operator seat

Sustainability

Stewards of the environment.

Reducing the Impact to the Environment

The 824K is designed and built with sustainability in mind.

• Engine Idle Shutdown can help you save fuel by avoiding unnecessary idling.
• Reduce waste to the environment with our maintenance free batteries.
• Built for multiple lives, the Cat 824 is one of the most rebuilt products to achieve the second and third life to get the most value from your investment. To assist with maximizing machine life, Caterpillar provides a number of sustainable options such as our Reman and Certified Rebuild programs. In these programs, reused or remanufactured components can deliver cost savings of 40 to 70 percent, which lowers operating cost while benefiting the environment.
• Caterpillar offers retrofit packages to bring new features to older machines, maximizing your resource. And, when you go through the Cat Certified Rebuild program, these retrofit kits are part of the rebuild process.

Blades

Cat blades to match your customers dozing requirements.

Cat Blades

Cat blades are resilient, durable and designed with excellent dozing and rolling characteristics.

• Capacities and widths are set to achieve increased productivity.
• Spreading design allows for spreading of cover material, as well as dozing of heavier loads.

Straight Blade

The straight blade (5.0 m3/6.6 yd3) is designed for production dozing in stockpile material and general earthmoving.

Universal Blade

The universal blade (7.7 m3/10.0 yd3) is designed to move large loads over long distances in mining applications.

Semi-Universal Blade

The characteristics of the straight and universal blades are combined into the semi-universal blade (7.7 m3/10.0 yd3). It provides increased capacity with the addition of short wings which include only the dozer end bits without sacrificing spreading characteristics of straight blades.

Coal Blade

The coal blade (16.2 m3/21.1 yd3) is designed for precise and productive dozing while helping to retain load control with increased capacity for lighter materials. Wing angles help retain the load while dozing.

Assemblies

The blades are combined with bulldozer assemblies which consist of the push arms, hydraulic lift, tip and tilt cylinders, trunnion mounting, stabilizer and hydraulic line guards.

Extended Wear Bulldozer Arrangement

The Extended Wear bulldozer arrangement is designed for moving large loads over long distances in harsh conditions. It consists of an 8.1 m3/10.7 yd3 U-blade with Abrasion Resistant Material (ARM) on the front and sides, cutting edges, push arm and integrated cylinder guards, and a heavy-duty stabilizer.

Other Available Options

See your Cat dealer for other blade options.

Operating Costs

Save time and money by working smart.

Data from customer machines show Cat Wheel Dozers are among the most fuel efficient machines in the industry. Several features contribute to this excellent fuel efficiency:

• ACERT Engine – Advanced engine controls maximizes power and efficiency.
• Engine Idle Shutdown – Automatic engine and electrical system shutdown conserves fuel.
• Lockup Torque Converter – Transfers more power to the ground and optimizes fuel efficiency in all applications.
• Single Clutch Speed Shifting (SCSS) – All new SCSS transmission controls provides greater momentum on grades and fuel savings by carrying that momentum through the shift points.
• Fuel Tank Capacity minimum of 12 hours operation depending on the application.

Machine configuration, operator technique, and job site layout can impact fuel consumption.

• Machine Configuration – Select the correct blade configuration based on your individual application.

POWER TRAIN

 Air to air aftercooler

 Auto shift

 Brakes, full hydraulic, enclosed, wet multiple disc service brakes

 Cat clean emission module (Tier 4 Final/Stage IV equivalent)

 Electro-hydraulic parking brake

 Electronic Clutch Pressure Control (ECPC)

 Engine, Cat C15 with ACERT Technology: – U.S. EPA Tier 4 Final/EU Stage IV equivalent – U.S. EPA Tier 3/EU Stage IIIA equivalent

 Fuel priming pump (electric)

 Fuel to air cooler

 Ground level engine shutoff

 Hydraulically driven demand fan

 Integrated braking system

 Muffler (under hood) (Tier 3/Stage IIIA equivalent)

 Radiator, Aluminum Modular (AMR)

 Separated cooling system

 Single Clutch Speed Shifting (SCSS)

 Starting aid (ether) automatic

 Throttle lock

 Torque converter with Lock Up Clutch (LUC)

 Transmission, planetary, with 4F/4R speed range control

Air to air aftercooler

Auto shift

Brakes, full hydraulic, enclosed, wet multiple disc service brakes

Cat clean emission module (Tier 4 Final/Stage IV equivalent)

Electro-hydraulic parking brake

Electronic Clutch Pressure Control (ECPC)

Engine, Cat C15 with ACERT Technology: – U.S. EPA Tier 4 Final/EU Stage IV equivalent – U.S. EPA Tier 3/EU Stage IIIA equivalent

Fuel priming pump (electric)

Fuel to air cooler

Ground level engine shutoff

Hydraulically driven demand fan

Integrated braking system

Muffler (under hood) (Tier 3/Stage IIIA equivalent)

Radiator, Aluminum Modular (AMR)

Separated cooling system

Single Clutch Speed Shifting (SCSS)

Starting aid (ether) automatic

Throttle lock

Torque converter with Lock Up Clutch (LUC)

Transmission, planetary, with 4F/4R speed range control

ELECTRICAL

 Alarm, back-up

 Alternator, 150 amp

 Batteries, maintenance-free (4 – 1,000 CCA)

 Electrical system, 24V

 Ground level lockable master disconnect switch

 Light, warning switched (LED strobe)

 Lighting, access stairway

 Lighting system, halogen (front and rear)

 Lights, directional (rear)

 Starter, electric (heavy duty)

 Starting receptacle for emergency start

OPERATOR ENVIRONMENT

 12V power port for mobile phone or laptop connection

 Air conditioner

 Cab, sound-suppressed pressurized

 Cab door, sliding window (LH)

 Cab Integrated Object Detection System (CIODS) ready

 Coat and hard hat hooks

 Electro-hydraulic tilt and lift controls

 Finger tip shifting controls

 Flip-up armrest

 Heater and defroster

 Horn, electric

 Implement hydraulic lockout

 Instrumentation, gauges: – DEF fluid level (Tier 4 Final/Stage IV) – Engine coolant temperature – Fuel level – Hydraulic oil temperature – Speedometer/tachometer – Torque converter temperature

 Instrumentation, warning indicators: – Action alert system, three categories – Brake oil pressure – Electrical system, low voltage – Engine failure malfunction alert and action lamp – Parking brake status

 Laminated glass

 Light, (dome) cab

 Lunch box and beverage holders

 Internal four-post rollover protective structure (ROPS/FOPS)

 Mirror, internal (panoramic)

 Mirrors, heated ready

 Mirrors, rearview (externally mounted)

 Radio ready for entertainment: – Antenna – Speakers – Converter (12V, 10-15 amp)

 Seat, Cat Comfort (cloth) air suspension

 Seat belt with minder, retractable, 76 mm (3 in) wide

 STIC control system with lockout

 Sun visor, front

 Tinted glass

 Transmission gear (indicator)

 Vital Information Management System (VIMS): – Graphical information display – External data port – Customizable operator profiles

 Wet-arm wipers/washers (front and rear): – Intermittent wipers (front and rear)

GUARDS

 Guard, driveshaft

 Guards, crankcase and power train

Guard, driveshaft

Guards, crankcase and power train

FLUIDS

 Antifreeze, premixed 50% concentration extended life (–34° C/–29° F)

Antifreeze, premixed 50% concentration extended life (–34° C/–29° F)

OTHER STANDARD EQUIPMENT

 Doors, service access (locking)

 Ecology drains for engine, radiator, transmission, hydraulic tank

 Emergency platform egress

 Engine, crankcase, 500 hour interval with CJ-4 oil

 Engine idle management features: – Auto idle kickdown – Delayed engine shutdown – Engine idle shutdown

 Fire suppression ready

 Fold down exhaust stack for shipping

 Fuel tank, 782 L (207 gal)

 Hitch, drawbar with pin

 Hoses, Cat XT

 Hydraulic, engine, and transmission oil coolers

 Oil change system, high speed

 Oil sampling valves

 Product Link

 Secondary steering

 Stairway, left and right rear access

 Steering, load sensing

 Toe kicks

 Total hydraulic filtration system

 Vandalism protection caplocks

 Venturi stack

Doors, service access (locking)

Ecology drains for engine, radiator, transmission, hydraulic tank

Emergency platform egress

Engine, crankcase, 500 hour interval with CJ-4 oil

Engine idle management features: – Auto idle kickdown – Delayed engine shutdown – Engine idle shutdown

Fire suppression ready

Fold down exhaust stack for shipping

Fuel tank, 782 L (207 gal)

Hitch, drawbar with pin

Hoses, Cat XT

Hydraulic, engine, and transmission oil coolers

Oil change system, high speed

Oil sampling valves

Product Link

Secondary steering

Stairway, left and right rear access

Steering, load sensing

Toe kicks

Total hydraulic filtration system

Vandalism protection caplocks

Venturi stack

OPERATOR ENVIRONMENT

 Camera, rear vision

 Radio, AM/FM/AUX/USB/BLUETOOTH

 Radio, CB (ready)

STARTING AIDS

 Heater, engine coolant, 120V

 Heater, engine coolant, 240V

Heater, engine coolant, 120V

Heater, engine coolant, 240V

BLADES

 Blade, Straight

 Blade, Straight with Push Plate

 Blade, Semi-U

 Blade, U

 Blade, Extended Wear U

 Blade, Coal U

Blade, Straight

Blade, Straight with Push Plate

Blade, Semi-U

Blade, U

Blade, Extended Wear U

Blade, Coal U

FLUIDS

 Antifreeze, –50° C (–58° F)

OTHER ATTACHMENTS

 Counterweight, Front

 Tire Pressure Monitoring System

MISCELLANEOUS

 Film (ANSI) (Tier 4 Final/Stage IV equivalent)

 EU certification (Tier 4 Final/Stage IV equivalent)

 Plate – year of manufacture (Tier 3/Stage IIIA equivalent)

360° Exterior View 360° Interior View