Caterpillar has a well proven history in the construction equipment industry and has been producing the highest quality machines for 90 years, making progress possible and driving positive and sustainable change on every continent. For over 35 years, from the A Series to current product we have produced backhoe loaders that are designed with the operator in mind, providing reliability, power and a quality operator environment. The Cat 426 Backhoe Loader continues this tradition, providing a machine to help you grow your business.
Engine
| Power - Net |
89 hp |
| Model |
Cat 3054C Mechanical Turbo |
| Emissions |
Engine meets U.S. EPA Tier 2/EU Stage II equivalent emission standards. |
| Rated Power (Standard) - 2,200 rpm - Gross - ISO 14396 |
93 hp |
| Net Peak Power Rating @ 2,200 rpm - SAE J1349 |
66.4 |
| Torque Rise - 1,200 rpm - Net |
38 |
| Maximum Torque - 1,400 rpm |
394 N·m |
| Bore |
105 mm |
| Stroke |
127 mm |
Weights
| Operating Weight - Nominal |
8425 kg |
| Operating Weight - Maximum |
11000 kg |
| Operating Weight |
8425 kg |
Hydraulic System
| Type |
Closed Center |
| Pump Type |
Variable Flow, Axial Piston |
| Maximum Pump Capacity |
132 L/min |
| System Pressure - Backhoe |
250 bar |
| System Pressure - Loader |
250 bar |
Noise Level
| Inside Cab |
80 dB(A) |
| Outside Cab |
104 dB(A) |
Transmission
| Note |
Travel speeds of Four Wheel Drive backhoe loader at full throttle, when equipped with 16.9×28 rear tires. |
| Power Shuttle Transmission - Forward 1st |
5.6 km/h |
| Power Shuttle Transmission - Forward 2nd |
9.3 km/h |
| Power Shuttle Transmission - Forward 3rd |
21 km/h |
| Power Shuttle Transmission - Forward 4th |
40 km/h |
| Power Shuttle Transmission - Reverse 1st |
5.6 km/h |
| Power Shuttle Transmission - Reverse 2nd |
9.3 km/h |
| Power Shuttle Transmission - Reverse 3rd |
21 km/h |
| Power Shuttle Transmission - Reverse 4th |
40 km/h |
Service Refill Capacities
| Cooling System |
22 l |
| Fuel Tank |
160 l |
| Engine Oil - With Filter |
8.8 l |
| Transmission - Power Shuttle - AWD |
15 l |
| Rear Axle |
16.5 l |
| Rear Axle - Planetaries |
1.7 l |
| Front Axle (AWD) |
6.5 l |
| Front Axle (AWD) - Planetaries |
0.7 l |
| Hydraulic System |
106 l |
| Hydraulic Tank |
40 l |
Weights*
| Operating Weight - Estimated |
8425 kg |
| Operating Weight - ROPS Capacity - Maximum |
11000 kg |
| Counterweights - Base |
115 kg |
| Counterweights - Medium |
240 kg |
| Note |
*Machine Configuration – standard engine, standard stick hoe, standard cab with A/C, AWD standard shift transmission, 0.96 m3 MP loader bucket, 24 inch standard duty hoe bucket, 12.5/80-18 and 16.9-28 tires, no counterweight, 80 kg operator and full fuel tank. |
| Minimum Counterweight Recommendations - E-Stick: E-Stick |
210 kg |
| Minimum Counterweight Recommendations - E-Stick: Loader Bucket - MP with Fork Brackets |
691 kg |
| Minimum Counterweight Recommendations - E-Stick: Loader Bucket - GP |
530 kg |
| Minimum Counterweight Recommendations - E-Stick: Loader Bucket - MP |
681 kg |
| Counterweights - High |
460 kg |
Axles - All Wheel Drive (AWD)
| Features (1) |
Heavy-duty rear axle with self adjusting inboard brakes and final drives. |
| Features (2) |
AWD is engaged by front console panel switch or by brake pedal during all-wheel-braking operation. AWD can be engaged on the move, under load, in any gear, forward or reverse. AWD has outer final drives for easy maintenance. |
| Features (3) |
AWD front axle is pendulum mounted and permanently sealed and lubricated, requiring no daily maintenance. Also features double-acting steering cylinder with 52° steering angle for increased maneuverability. |
Axle Ratings
| Front Axle (AWD) - Static |
22964 kg |
| Front Axle (AWD) - Dynamic |
9186 kg |
| Rear Axle - Static |
22964 kg |
| Rear Axle - Dynamic |
9186 kg |
Steering
| Type |
Front Wheel |
| Power Steering |
Hydrostatic |
| AWD Cylinder, One (1) Double Acting - Bore |
65 mm |
| AWD Cylinder, One (1) Double Acting - Stroke |
120 mm |
| AWD Cylinder, One (1) Double Acting - Rod Diameter |
36 mm |
| Turning Circle - AWD (inner wheel not braked) - Outside, Front Wheels |
8.18 m |
| Turning Circle - AWD (inner wheel not braked) - Outside, Widest Loading Bucket |
10.97 m |
Brakes
| Type |
Fully enclosed boosted, hydraulic, multiple discs. |
| Features (1) |
Inboard oil-immersed, hydraulically actuated multiple Kevlar discs on final drive input shaft. |
| Features (2) |
Completely enclosed and sealed. |
| Features (3) |
Self-adjusting. |
| Features (4) |
Dual foot-operated boosted brake pedals can be interlocked for roading. |
| Features (5) |
Parking/secondary brakes are independent of the service brake system. Parking (secondary) brake is mechanically applied through a hand lever located in the right side console. |
| Features (6) |
Meets ISO 3450:2011 and CMVR requirements. |
Excavator Bucket Dimensions and Performance: Standard Stick
| Bucket Dig Force |
57.22 kN |
| Digging Depth, Manufacturer's Maximum |
4707 mm |
| Loading Reach |
1528 mm |
| Maximum Operating Height |
5721 mm |
| Stick Dig Force |
35.3 kN |
| Digging Depth, 2440 mm Flat Bottom |
3740 mm |
| Reach from Swing Pivot at Ground Line |
5603 mm |
| Digging Depth, 600 mm Flat Bottom, Manufacturer's |
4668 mm |
| Bucket Rotation |
205° |
| Stabilizer Overall Width |
2242 mm |
| Digging Depth, 600 mm Flat Bottom |
4092 mm |
| Digging Depth, SAE Maximum |
4116 mm |
| Loading Height |
3934 mm |
| Swing Arc |
180° |
Loader Bucket Dimensions and Performance: MP - 1 m3
| Maximum Operating Height |
4348 mm |
| Tilt Breakout Force |
60.47 kN |
| Dump Height at Maximum Angle |
2766 mm |
| Tipping Load at Breakout Point |
6301 kg |
| Maximum Hinge Pin Height |
3449 mm |
| Lift Breakout Force |
53.95 kN |
| Maximum Bucket Rollback at Ground Level |
42° |
| Grill to Bucket Cutting Edge, Carry Position |
1449 mm |
| Width |
2262 mm |
| Dump Reach at Maximum Angle |
822 mm |
| Digging Depth |
145 mm |
| Lift Capacity at Maximum Height |
3496 kg |
| Maximum Grading Angle |
116° |
| Dump Angle at Full Height |
46° |
| Capacity |
1 m³ |
Excavator Bucket Dimensions and Performance: E-Stick Extended
| Stabilizer Overall Width |
2242 mm |
| Maximum Operating Height |
6338 mm |
| Loading Reach |
2546 mm |
| Stick Dig Force |
24.59 kN |
| Swing Arc |
180° |
| Loading Height |
4491 mm |
| Digging Depth, SAE Maximum |
5208 mm |
| Reach from Swing Pivot at Ground Line |
6585 mm |
| Digging Depth, Manufacturer's Maximum |
5697 mm |
| Digging Depth, 2440 mm Flat Bottom |
4887 mm |
| Digging Depth, 600 mm Flat Bottom, Manufacturer's |
5684 mm |
| Bucket Dig Force |
56.61 kN |
| Bucket Rotation |
205° |
| Digging Depth, 600 mm Flat Bottom |
5168 mm |
Loader Bucket Dimensions and Performance: MP with Forks - 1 m3
| Maximum Operating Height |
4832 mm |
| Dump Reach at Maximum Angle |
822 mm |
| Digging Depth |
145 mm |
| Tilt Breakout Force |
59.26 kN |
| Lift Capacity at Maximum Height |
3172 kg |
| Tipping Load at Breakout Point |
6048 kg |
| Maximum Hinge Pin Height |
3449 mm |
| Lift Breakout Force |
51.04 kN |
| Dump Height at Maximum Angle |
2766 mm |
| Capacity |
1 m³ |
| Width |
2262 mm |
| Maximum Bucket Rollback at Ground Level |
40° |
| Dump Angle at Full Height |
46 ° |
| Grill to Bucket Cutting Edge, Carry Position |
1449 mm |
| Maximum Grading Angle |
116° |
Excavator Bucket Dimensions and Performance: E-Stick Retracted
| Digging Depth, 2440 mm Flat Bottom |
3806 mm |
| Loading Reach |
1648 mm |
| Reach from Swing Pivot at Ground Line |
5657 mm |
| Digging Depth, 600 mm Flat Bottom |
4158 mm |
| Loading Height |
3947 mm |
| Maximum Operating Height |
5722 mm |
| Bucket Dig Force |
56.61 kN |
| Stabilizer Overall Width |
2242 mm |
| Digging Depth, Manufacturer's Maximum |
4756 mm |
| Stick Dig Force |
33.66 kN |
| Digging Depth, 600 mm Flat Bottom, Manufacturer's |
4719 mm |
| Digging Depth, SAE Maximum |
4191 mm |
| Swing Arc |
180° |
| Bucket Rotation |
205° |
Backhoe Digging Depth
| Dig Depth |
4707 mm |
| E-Stick Extended |
5697 mm |
| E-Stick Retracted |
4756 mm |
Loader Bucket Dimensions and Performance: GP - 1.05 m3
| Capacity |
1.05 m³ |
| Width |
2262 mm |
| Lift Capacity at Maximum Height |
3610 kg |
| Lift Breakout Force |
54.48 kN |
| Tilt Breakout Force |
53.91 kN |
| Tipping Load - Breakout Point |
6225 kg |
| Maximum Hinge Pin Height |
3449 mm |
| Dump Angle at Full Height |
46° |
| Dump Height at Maximum Angle |
2735 mm |
| Dump Reach at Maximum Angle |
897 mm |
| Maximum Bucket Rollback at Ground Level |
41° |
| Digging Depth |
112 mm |
| Maximum Grading Angle |
113° |
| Grill to Bucket Cutting Edge, Carry Position |
1480 mm |
| Maximum Operating Height |
4370 mm |
Loader Bucket Dimensions and Performance: MP - 1.0 m3
| Capacity |
0.96 m³ |
| Width |
2262 mm |
| Lift Capacity at Maximum Height |
3475 kg |
| Lift Breakout Force |
54 kN |
| Tilt Breakout Force |
60.48 kN |
| Tipping Load - Breakout Point |
7110 kg |
| Maximum Hinge Pin Height |
3447 mm |
Machine Dimensions - 426 Phase 2: GP - 1.05 m3
| Overall Length in Roading Position |
225 in |
| Overall Transportation Length |
5677 mm |
| Overall Transportation Height - 4.3 m |
3757 mm |
| Overall Width |
2346 mm |
| Height to Top of Cab/Canopy |
2895 mm |
| Height to Top of Exhaust Stack |
2716 mm |
| Rear Axle Centerline to Front Grill |
2708 mm |
| Wheelbase AWD |
2200 mm |
Machine Dimensions - 426 Phase 2: MP - 1 m3
| Overall Length in Roading Position |
5674 mm |
| Overall Transportation Length |
5681 mm |
| Overall Transportation Height - 4.3 m |
3757 mm |
| Overall Width |
2346 mm |
| Height to Top of Cab/Canopy |
2895 mm |
| Height to Top of Exhaust Stack |
2716 mm |
| Rear Axle Centerline to Front Grill |
2708 mm |
| Wheelbase AWD |
2200 mm |
| Note |
Dimensions and performance specifications shown are for machines equipped with 12.5/80-18 front tires, 16.9-28 rear tires, standard cab, standard stick with 610 mm standard duty bucket, and standard equipment unless otherwise specified. |
