The Cat® 740 GC features a world-class cab design, re-engineered using global operator feedback to advance comfort and ease of operation. Enhancements include new controls, transmission-protection features, hoist-assist system, advanced automatic traction control system, stability-assist machine rollover warning system, and a fuel saving ECO mode.
Engine
Engine Model |
Cat® C15 |
Bore |
137 mm |
Stroke |
171.5 mm |
Displacement |
15.2 l |
Emissions |
The C15 engine emits either Tier 2/Stage II or Tier 3/Stage IIIA equivalent emissions. |
Net Power - SAE J1349 |
434 HP |
Net Power - ISO 14396 |
443 HP |
Gross Power - SAE J1995 |
449 HP |
Peak Engine Torque Gross (SAE J1995) |
2320 N·m |
Peak Engine Torque Net (SAE J1349) |
2264 N·m |
Peak Engine Torque Speed |
1200 r/min |
No Engine De-rating Below |
3050 m |
Engine Model - Either U.S. EPA Tier 2/EU Stage II or U.S. EPA Tier 3/EU Stage IIIA equivalent |
Cat C15 |
Note (2) |
The net power advertised is the power available at the flywheel when the engine is equipped with alternator, air cleaner, muffler and fan at minimum speed. |
Note (1) |
The power ratings apply at rated speed of 1,700 rpm when tested under the conditions for the specified standard. |
Note (3) |
Net power when the fan is at maximum speed is 324 kW (434 hp) per the SAE reference conditions. |
Weights
Body Capacities
Heaped (SAE 2:1) |
22.7 m³ |
Struck |
17 m³ |
Tailgate Heaped SAE 2:1 |
24.4 m³ |
Tailgate Struck |
17.9 m³ |
Transmission
Forward - 1 |
6.4 km/h |
Forward - 2 |
8.5 km/h |
Forward - 3 |
11.5 km/h |
Forward - 4 |
14.8 km/h |
Forward - 5 |
19.7 km/h |
Forward - 6 |
24 km/h |
Reverse - 1 |
6.8 km/h |
Forward - 9 |
57.5 km/h |
Forward - 7 |
33.1 km/h |
Reverse - 2 |
15.7 km/h |
Forward - 8 |
39.8 km/h |
Sound Levels
Interior Cab |
72 dB(A) |
Note (2) |
Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in noisy environments. |
Note (1) |
The operator sound exposure Leq (equivalent sound pressure level) measured according to the work cycle procedures specified in ANSI/SAE J1166 OCT98 is 72 dB(A), for the cab offered by Caterpillar, when properly installed and maintained and tested with the doors and windows closed. |
Operating Weights
Rear Axle - Loaded |
23020 kg |
Center Axle - Empty |
6709 kg |
Center Axle - Rated Load |
16534 kg |
Total - Loaded |
68257 kg |
Front Axle - Loaded |
21994 kg |
Front Axle - Rated Load |
3233 kg |
Rear Axle - Rated Load |
16534 kg |
Total - Empty |
31956 kg |
Total - Rated Load |
36301 kg |
Rear Axle - Empty |
6486 kg |
Center Axle - Loaded |
23243 kg |
Front Axle - Empty |
18761 kg |
Service Refill Capacities
Fuel Tank |
550 l |
Cooling System |
90 l |
Engine Crankcase |
52 l |
Steering/Hoist Hydraulic System |
140 l |
Brake Cooling Tank |
67 l |
Final Drive - Each |
5 l |
Transmission - OTG |
75 l |
Axles - Each |
60 l |
Body Hoist
Raise Time |
12 s |
Lower Time |
12 s |
Steering
Lock to Lock |
4.75 seconds @ 60 rpm |
Standards
Brakes |
ISO 3450 – 2011 |
Cab - FOPS |
ISO 3449 Level II – 2005 |
Cab - ROPS |
ISO 3471 – 2008 |
Steering |
ISO 5010 – 2007 |
Body Plate
Type |
High strength Brinell HB450 wear resistant steel |
Turning Circle
Turning Dimensions - Steer Angle - Left/Right |
45° |
Turning Dimensions - Aisle Width |
5595 mm |
Turning Dimensions - Inside Radius |
3960 mm |
Note |
Dimensions are for machines equipped with 29.5 R25 tires. |
Turning Dimensions - Clearance Radius |
8395 mm |
Turning Dimensions - SAE Turning Radius |
7698 mm |
Body Plate Thickness
Side Plates |
11 mm |
Front Plate |
7 mm |
Base Plate |
13 mm |
Optimal Loader/Truck Pass Matching
Note |
An optimum system match gives you a major productivity advantage. The 740 GC is an excellent match for the Cat 374F and 352F Hydraulic Excavators; and Cat 972M, 966M, and 962M Wheel Loaders. Having matched loading and hauling tools results in increased production and lower system costs per unit of volume moved. |
Wheel Loader: 966M - Passes |
4–5 |
Hydraulic Excavator: 352F - Passes |
5–6 |
Wheel Loader: 972M - Passes |
3 |
Wheel Loader: 962M - Passes |
5 |
Hydraulic Excavator: 374F - Passes |
3–4 |