Descriptions
Manufacturer:
Caterpillar
Product Family:
Power Modules (obs)
Model:
3516
Year:
2007
SMU/Hrs:
22964
Location:
UAE
Serial number:
ZAP00615
Minimum Rating | 980.0 ekW |
Maximum Rating | 1640.0 ekW |
Emissions | IMO Tier II |
Aspiration | Turbocharged-Aftercooled |
Engine Control | Electronic |
Generator Set Control | Electronic |
Weight | 18800.0 kg |
Stroke | 300.0 mm |
Bore | 200.0 mm |
Displacement | 56.0 L |
Length | 6073.0 mm |
Height | 3218.0 mm |
Width | 1680.0 mm |
Motor-driven barring gear, fitted on engine
Reversing contractor and pushbutton switch with cable
Electronic speed setting equipment with actuator and speed pick-up
Emergency shutdown equipment with pushbutton, separate, for manual emergency stop
Gauge board with set liquid damped pressure gauges for: fuel, lubricating oil, fresh water, starting air, and charge air.
On-engine thermometers for fuel, lubricating oil, fresh water, and charge air
Electric remote speed indicator
Turbocharger and remote speed indicator
Exhaust gas temperature indicator
Manual control on engine, including: control panel with start /stop key, speed setting device, mechanical shutdown device, change over of control functions from engine to remote control
Starting solenoid valve on engine, 24 V DC
Separate electronic speed governor
Lube oil pressure at full load below danger level - Low lube oil pressure - Lube oil pressure below danger level - Lube oil pressure prelubrication failed - Low fresh water pressure at engine inlet - Fresh water pressure at engine inlet below danger level
Separate non-return valve for the starting air pipe to the engine
Air intake filter, fitted on the turbocharger
Air bottles, separate
Circulating pump fitted on engine
Duplex filter with differential pressure indication
Turbocharger at free end with transition nozzle (0 degrees from the vertical and away from engine), with compressor cleaning device
Expansion joint separate
Separate silencer and spark arrester, unlagged 35 dB(A)
HT pump, fitted on engine
LT pump, fitted on engine
HT thermostat, not powered and separate
Engine preheating equipment, fitted on base frame
Plate cooler, fitted on engine
Force pump, fitted on engine
Prelubrication pump, fitted on base frame, electric motor driven
Boll and Kirch automatic backflushing filter, fitted on engine
Pressure control valve, fitted on engine
Set of connecting parts between flange coupling and flywheel
Flexible flange coupling between engine and generator
Base frame with flywheel guard and incorporating lube oil sump tank, for engine and generator
Set of bonded rubber rails for resilient mounting of the base frame
Set of flexible pipe connections
Set of tools for the engine including hydraulic tightening tools and nozzle tester
Set of tools for turbocharger
Inside micrometer for cylinder liners
Ruler for cylinder liner
Set of engine spare parts for unrestricted operation
Set of spare flexible pipe connections