Minimum Rating | 1030 ekW |
Maximum Rating | 1360 ekW |
Emissions | EPA Tier 2, IMO II |
Engine Control | ADEM A3 |
Fuel System | EUI |
Aspiration | Turbocharged-Aftercooled |
Stroke | 190 mm |
Oil Change Interval | 500 h |
Displacement | 51.8 l |
Bore | 170 mm |
Weight | 14975 kg |
Length | 5448 mm |
Width | 1825 mm |
Height | 2313 mm |
Lube Oil System - Refill | 318 l |
Cooling System - Engine | 157 l |
Corrosion resistant separate circuit aftercooler core, regular dutyair cleaners, dual turbochargers
Caterpillar A-III electronic engine control, Electronic UnitInjection fuel system, rigid wiring harness
Auxiliary fresh water pump, centrifugal non-self-priming auxiliarysea water pump, gear driven centrifugal jacket water pump,expansion tank, engine oil cooler, thermostats and housing
Dry gas-tight exhaust manifolds with heat shields, dualturbochargers with water-cooled bearings and heat shields,vertical exhaust outlet
Flywheel, SAE No. 00, 183 teethFlywheel housing, SAE No. 00
Fuel filter, RH, with service indicators
Fuel transfer pump
Electronically Controlled Unit Injectors
Engine mounted instrument panel with four position switch, overspeed shutdown notification light, emergency stop notificationlight, graphical display unit for analog or digital display of: oil andfuel pressure, oil and fuel filter differential, system DC v
Top mounted crankcase breather, RH oil filter, RH oil filler,gear type oil pump, deep sump oil pan, recommended use ofCaterpillar Diesel Engine Oil 10W30 or 15W40
Industrial type engine mounting rails)
Accessory driveLower RH, Lower LHFront housing, Two-sided
A-III Electronic Monitoring System provides customer programmableengine de-ration strategies to protect against adverse operatingconditions
Emergency stop push button (located in Electronic Instrument Panel)Safety shutoff protection for oil pressure and water temperature, overspeed protection
Vibration damper and guardPaint, Caterpillar Yellow engine with black rails.Lifting eyes
Air Cleaner Removal
Remote Air Inlet Adapters
Battery Chargers
Charging Alternators
Load Sharing module
Local speed throttle control
Water level switch gauge
Coolant level sensors
Connections
Keel Cooling Conversions
Radiator cooling conversion
Heat exchangers
Auxiliary water pumps
Sea water pump removal
Air separator
Exhaust outlet
Flexible fittings
Elbows
Flanges
Flange and exhaust expanders
Mufflers
Fuel Cooler
Fuel priming pumps
Flexible fuel lines
Rigid Fuel Lines
Primary fuel filter
Fuel level switch
INSTALLED GENERATOR ARRANGEMENTS F/MAR AUX ENGINES
INSTALLED GENERATOR ARRANGEMENTS F/MAR AUX ENGINES
PL1000T Communication Module
PL1000E Communication Module
Customer Interface Box
Thermocouples
Remote panel display
Remote cylinder temperature display
Oil Pan
Oil pan accessories
Sump pumps
Prelubrication Options
Lubricating oil
Centrifugal Oil Filter
Vibration isolators
Rails
Flywheel guard
Flexible coupling
Coupling hub
Front housing accessories
Upper left hand front location
Upper left hand rear location
Upper right hand front location:
Upper right hand rear location
Lower left hand front location
Front housing accessory drives
Front power take-offsFront power take-offs
Crankshaft pulleys
Damper guard removals
Air inlet shutoffs
Switches and contactors
Explosion relief valve
Sensors
Engine Parts Kits
Starting motors or barring divice
Air starting motors options
Starting aids
Battery sets - 24 volt - Dry
Battery rack
Tool set
Caterpillar datalink wire
Commissioning