Land Mechanical Engines

  • Specification Summary

  • Minimum Rating 328 bkW
  • Maximum Rating 444 bkW
  • Emissions EPA and CARB Non-Road Mobile Tier 3, EU Stage IIIA
  • Rated Speed 1800 r/min
  • Download Brochure
product-C15 ACERT Land Drilling Engines
Cat C15 ACERT engines are the ideal solution for your demanding operations in the oilfield. Decades of field operation and intense research and development allow Cat C15 ACERT engines to deliver excellent performance with low operating costs and emissions. This is an ideal engine for land mechanical drilling applications such as mud pump drives. Cat C15 ACERT™ Industrial Diesel Engine. Ratings: 328-444 bkW (440-595 bhp) @ 1800-2100 rpm meet China Stage II, U.S. EPA Tier 3 equivalent, EU Stage IIIA equivalent emission standards.

Engine Specifications

Minimum Rating 328 bkW
Maximum Rating 444 bkW
Emissions EPA and CARB Non-Road Mobile Tier 3, EU Stage IIIA
Rated Speed 1800 r/min
Bore 137 mm
Stroke 171 mm
Displacement 15.2 l
Aspiration Turbocharged-Aftercooled
Governor and Protection ADEM A3
Engine Weight - Net Dry 1245 kg
Rotation from Flywheel End Counterclockwise
Oil Change Interval 250
Flywheel and Flywheel Housing SAE No. 0 or SAE No. 1
Flywheel Teeth 136 (SAE 0), 113 (SAE 1)

Capacity for Liquids

Minimum Cooling System - Engine Only 20.8 l

Dimensions

Length 1377 mm
Width 927 mm
Height 1227 mm

Air Inlet System

 Single turbocharger, mid-mounted, inlet 152.4 mm (6 in), hose connection

Control System

 Electronic governing, PTO speed control

 Programmable ratings

 Cold mode start strategy

 Automatic altitude compensation

 Power compensation for fuel temperature

 Programmable low and high idle and TEL

 Electronic diagnostics and fault logging

 Engine monitoring and protection system (speed, temperature, pressure)

 J1939 Broadcast (diagnostic, engine status, and control)

Cooling System

 Thermostats and housing — outlet vertical

 Jacket water pump — gear-driven, centrifugal, RH

 RH front water pump inlet

 All plugs/fittings are STOR for lines gp water

Exhaust System

 Exhaust manifold — dry

 Front turbo exhaust

 Full marmon connection, maximum load 10 kg for direct connection to turbo

Flywheels and Flywheel Housings

 See Mandatory Options

See Mandatory Options

Fuel System

 MEUI system

 Fuel filter, secondary, mid-mount (LH 2 micron high performance)

 Fuel transfer pump, LH front

 Fuel priming pump, LH mid-mount

 Fuel sample valve, mounted on fuel filter base

Lube System

 Crankcase breather — rear valve cover

 Oil cooler — RH

 Oil filter — RH

 Oil pan — front sump

 Oil filler — LH front

 Oil dipstick — LH front

 Oil pump

 Oil valve sampling — on oil filter base

Crankcase breather — rear valve cover

Oil cooler — RH

Oil filter — RH

Oil pan — front sump

Oil filler — LH front

Oil dipstick — LH front

Oil pump

Oil valve sampling — on oil filter base

Mounting System

 Front support (shipping only)

Power Take-Offs

 Crankshaft pulley, 203.2 mm (8 in), 3 grooves 292.1 mm (11.5 in) 1 groove, all 15.9 mm (.63 in) width

 Hydraulic pump drive, SAE A, 11 tooth

Crankshaft pulley, 203.2 mm (8 in), 3 grooves 292.1 mm (11.5 in) 1 groove, all 15.9 mm (.63 in) width

Hydraulic pump drive, SAE A, 11 tooth

General

 Vibration damper

 Paint — Cat yellow

 Lifting eyes

 Automatic variable timing, electronic

 Electronic installation kit 70-pin connector (connectors, pins, sockets)

 Literature group owner and operator

Vibration damper

Paint — Cat yellow

Lifting eyes

Automatic variable timing, electronic

Electronic installation kit 70-pin connector (connectors, pins, sockets)

Literature group owner and operator

Mandatory Options

 Throttle position sensor

 Exhaust system — front or rear

 Flywheel housing or rear PTO

 Primary filter/water separator

Throttle position sensor

Exhaust system — front or rear

Flywheel housing or rear PTO

Primary filter/water separator

Transmission Arrangement

 Transmission cooler

 Tool set

Transmission cooler

Tool set

Air Compressor

 Air chambers

 Air compressor governor

Air Inlet System

 Air cleaners

 Precleaners

 Air lines

 Air inlet gasket

Charging System

 Charging alternators

 Alternator mountings

 Alternator wiring

 Circuit breaker mountings

 Alternator belt guard

Cooling System

 Radiator — installed

 Radiator — ship loose

 Fan drive f/u/w Caterpillar installed radiator

 Fan drives for customer-supplied radiators

 Fan height instructions

 Vee belts for customer-supplied radiators

 Aftercooler lines f/u/w Caterpillar installed radiator

 Rear-facing exhaust

 Aftercooler lines

 Suction fan adapters — attaches fan to fan pulley

 Blower fan adapter — attaches fan to fan pulley

 Blower fan

 Suction fan

 Fan belt tightener

 Coolant level sensor

 Dry charge coolant conditioners

 Dry charge coolant conditioner element

Exhaust System

 Turbo exhaust connection

 Flexible fitting

 Elbows

 Flanges

 Dry elbow