Emissions | Non-certified |
Displacement | 69 l |
Generator | SR4B |
Stroke | 190 mm |
Oil Change Interval | 500 h |
Fuel System | EUI |
Engine Control and Protection | ADEM A3 |
Weight | 18810 kg |
Bore | 170 mm |
Aspiration | Turbocharged-Aftercooled |
Voltage | 600 |
Width | 2385 mm |
Length | 7874 mm |
Height | 2520 mm |
Lube Oil System - Refill | 405 l |
Cooling System - Engine | 233 l |
Corrosion-resistant aftercooler core
Air Inlet shutoff
Regular duty air cleaner
ADEM A3 ECU, left-hand mounted
Direct rack control 0-200 mADC, space heater and jacket water heater connection and controls
Separate-circuit aftercooled
Outlet controlled jacket water thermostat
Jacket water pump - gear driven
Dual outlet
Aftercooler water pump - gear driven
Aftercooler water thermostat
Dry exhaust manifold
Dual turbochargers, water cooled bearings
SAE No. 00 flywheel
SAE No. 00 flywheel housing
SAE standard rotation
Fuel filter simplex (LH) with priming pump (LH)
Fuel transfer pump
Fuel return line with flexible connection
Electronic unit injectors
Barrel-mounted petroleum terminal box with air filter and pressure differential switch
Emergency stop button
Analog gauges:
Service port connector
Customer connection terminal blocks
140 mm (5.5 in) Graphical Display
Communication
Controls
Generator Set Protection
Outputs
Inputs
Other Features
Crankcase breather
Oil cooler
Shallow oil pan
Oil drain extension, 2 in NPT female connection
Simplex oil filter
4.19 m (165 in) length, 412 mm (16.2 in) height tubes, 1.18 m (50.5 in) wide
Engine alarms, derate, and shutdown in abnormal operation
TDI air starting motor, RH - 1034 kPa (150 psi)
Paint - Cat yellow
Heavy duty air cleaner
Remote air inlet adapter - rectangular
Remote air inlet adapter - round
Engine control options:
Load sharing governor, 2301A
Radiator options:
Coolant level sensor
Coolant conditioner
Cooling system connection options (for use with customer-supplied radiator):
Fan drive and belt guard (for use with remote and customersupplied radiators)
Fan pulley options (for use with customer-supplied radiator):
1200 rpm model only:
1500 rpm model only:
Custom fuel filter
Primary fuel filter
Primary fuel filter with water separator
Cable access box
Air filter
Bearing RTDs
Low voltage extension box
Manual voltage control
Communications module PL1000T
Communications module PL1000E
Thermocouples installed, one per cylinder
Custom oil filter
RH installed centrifugal oil filter
SAE15W40, Caterpillar DEO, 500 hour
Crankcase fumes disposal
Oil level regulator
Bases
Vibration isolators, rails
Alternator, 24V, 68A
Front accessory drive
Pulleys
Explosion relief valves (3)
Metal particle detector switch
Metal particle detector with annunciator
Custom starting motor
Air pressure regulator
LH installed engine barring group
Jacket water heater, UL recognized, 120-240V, single phase, 6 kW, LH and RH mounted
Jacket water heater, UL recognized, 120-480V, single phase, 12 kW, LH and RH mounted
Jacket water heater lines