Minimum Rating | 1245 ekW |
Maximum Rating | 1245 ekW |
Emissions | U.S. EPA Nonroad Tier 2 |
Bore | 170 mm |
Oil Change Interval | 500 h |
Weight | 13381 kg |
Generator | SR4B |
Aspiration | Turbocharged-Aftercooled |
Displacement | 59 l |
Stroke | 215 mm |
Generator Set Control | EMCP 4.3 |
Fuel System | EUI |
Voltage | 600 |
Engine Control and Protection | ADEM A3 |
Length | 7880 mm |
Width | 2384 mm |
Lube Oil System - Refill | 318 l |
Cooling System - Engine | 157 l |
Corrosion-resistant aftercooler core
Air Inlet shutoff
Regular duty air cleaner
ADEM A3 ECU, left-hand mounted
Direct rack control 0-200 mADC, space heater and jacket water heater connection and controls or
Cat Digital Voltage Regulator (DVR), includes reactive droop capability, 3-phase voltage sensing, kVAR/PF modes, RFI suppression, min/max exciter limiter and exciter diode monitor, space heater and jacket water heater connection and controls, temperature m
Separate-circuit aftercooled
Outlet controlled jacket water thermostat
Jacket water pump - gear driven
Dual outlet
Aftercooler water pump - gear driven
Aftercooler water thermostat
Dry exhaust manifold
Dual turbochargers, water cooled bearings
Exhaust adapter, 297 mm I.D. to 340 mm I.D. (11.7 in to 13.4 in)
Weldable flange, 360 mm I.D. (14.2 in)
SAE No. 00 flywheel
SAE No. 00 flywheel housing
SAE standard rotation
Fuel filter simplex (LH) with priming pump (LH)
Fuel transfer pump
Fuel return line with flexible connection
Electronic unit injectors
Fuel priming pump
Emergency stop button
Analog gauges:
Service port connector
Customer connection terminal blocks
140 mm (5.5 in) Graphical Display
Communication
Controls
Generator Set Protection
Outputs
Inputs
Other Features
Crankcase breather
Oil cooler
Shallow oil pan
Oil drain extension, 2 in NPT female connection
Simplex oil filter
4.19 m (165 in) length, 412 mm (16.2 in) height tubes, 1.18 m (50.5 in) wide
Viscous damper drive line coupler
Accessory drive
Lower LH front (available for PTO usage)
Front housing, two-sided
Engine alarms, derate, and shutdown in abnormal operation
TDI air starting motor, RH - 1034 kPa (150 psi)
LH control air silencer
Paint - Cat yellow
Vibration damper and guard
Lifting eyes
Lift and cable two provisions
Heavy duty air cleaner
Remote air inlet adapter - rectangular
Remote air inlet adapter - round
Load sharing governor, 2301A
Load sharing module
Governor conversion to 0-200 mA direct rack control
Radiator options:
Coolant level sensor
Coolant conditioner
Exhaust flexible fitting, 318 I.D. mm (12.5 in)
Elbow, 305 mm (12 in)
Muffler 305 mm (12 in), non spark arresting
Muffler, 356 mm (14 in), spark arresting, includes companion flanges, clean-out box, and spark box
Muffler, 305 mm (12 in), spark arresting, includes companion flanges, clean-out box, and spark box
Custom fuel filter
Primary fuel filter
Primary fuel filter with water separator
Barrel-mounted petroleum terminal box with air filter and pressure differential switch
Barrel-mounted petroleum terminal box
Current droop transformer
Cable access box
Low voltage extension box
Current sensing transformers (3)
Bearing temperature detectors
Communications module PL1000T
Communications module PL1000E
Thermocouples installed, one per cylinder
RH installed centrifugal oil filter
Crankcase fumes disposal
Oil level regulator
7.62 m (25 ft) outer base
9.14 m (30 ft) outer base
12.19 m (40 ft) outer base
Package isolator supports (3), for mounting inner base to customer-supplied base
Custom base
Alternator, 24V, 60A
Crankshaft pulley
Explosion relief valves (3)
Metal particle detector switch
Metal particle detector with annunciator
Custom starting motor
Air pressure regulator
LH installed engine barring group
Jacket water heater, UL recognized, 120-240V, single phase, 6 kW, LH and RH mounted
Jacket water heater, UL recognized, 120-480V, single phase, 12 kW, LH and RH mounted
Jacket water heater lines