G3516B LE Gas Engine
Gas Compression Engines
-
Specification Summary
- Maximum Rating 1029 bkW
- Emissions NSPS Site Compliant Capable
- Displacement 69.3 l
- Minimum Rating 1029 bkW
Engine Specifications
| Maximum Rating | 1029 bkW |
| Emissions | NSPS Site Compliant Capable |
| Displacement | 69.3 l |
| Minimum Rating | 1029 bkW |
| Aspiration | Turbocharged-2 Stage Aftercooled |
| Flywheel and Flywheel Housing | SAE No. 00 |
| Flywheel Teeth | 183 |
| Weight - Dry | 8401 kg |
| Oil Change Interval | 1000 hr |
| Ignition, Protection | ADEM™ A3 |
| Stroke | 190 mm |
| Bore | 170 mm |
Capacity for Liquids
| Cooling System | 221.5 l |
| Lube Oil System - Refill | 424 l |
Air Inlet System
Axial flow air cleaners
Service indicator
Cleanable
Cooling System
Two-stage charge air cooling:
Engine cooling and charge air cooling thermostats
Two-stage charge air cooling:
Engine cooling and charge air cooling thermostats
Exhaust System
Dry exhaust manifolds and turbocharger housings
Flywheels and Housings
SAE 00 flywheel
SAE 00 flywheel housing
SAE standard rotation
Fuel System
Electronic fuel metering valve
Requires 7-50 psig gas supply
Gas pressure regulator
Gas shutoff valve
Instrumentation
Remote-mounted Advisor control panel
Interconnect harness
Remote-mounted Advisor control panel
Interconnect harness
Lube System
Top-mounted crankcase breathers
Oil cooler
Oil filter and oil sampling valve
Drain valve
Turbo oil accumulator
API B16.3 approved gas/air-driven pre-lube system
Torsional Vibration Analysis
Caterpillar provided
Mounting
Rails
Rails
Control Panels
4" LCD Advisor display panel
Shipped loose
Starting System
90 psi TDI starter
150 psi TDI starter
Power Take-Offs
Front housing, two sided
Front lower LH accessory drive
Protection System — Display/Alarm/Shutdown
Low oil pressure
Oil filter differential pressure
High fuel or oil temperature
Engine oil to engine coolant
Differential temperature
High coolant temperature
Engine speed
Engine load
Battery voltage
Detonation
Manifold air temperature
Coolant JW inlet/outlet pressure
Left turbo inlet temperature
Right turbo inlet temperature
Cylinder port temperature
Low oil pressure
Oil filter differential pressure
High fuel or oil temperature
Engine oil to engine coolant
Differential temperature
High coolant temperature
Engine speed
Engine load
Battery voltage
Detonation
Manifold air temperature
Coolant JW inlet/outlet pressure
Left turbo inlet temperature
Right turbo inlet temperature
Cylinder port temperature
Protection System — Display Only
Service hours
Oxygen level
Service hours
Oxygen level
General
Paint — Cat yellow
Dual 23" vibration damper with guard
CSA Certification, Class 1 Division 2 Groups C and D
Air Inlet System
Rectangular air inlet adapter
Circular air inlet adapter
Charging System
Battery Charger 20 amp
Connections
Mechanical joint assembly
Inlet connection
Mechanical joint assembly
Inlet connection
Exhaust System
Flexible fittings available at first production build
Elbows and mufflers
Flexible fittings available at first production build
Elbows and mufflers
Instrumentation
Optional interconnect harness
Optional interconnect harness
Lube System
Shipped with lube oil
Mounting System
Rails
Power Take-Offs
Front stub shaft
Literature
Options available
30 Mins