G3406 Gas Compression Engine
Gas Compression Engines
-
Specification Summary
- Maximum Rating 242 bkW
- Emissions NSPS Site Compliant Capable
- Displacement 14.59 l
- Minimum Rating 160 bkW
- Download Brochure
Engine Specifications
| Maximum Rating | 242 bkW |
| Emissions | NSPS Site Compliant Capable |
| Displacement | 14.59 l |
| Minimum Rating | 160 bkW |
| Compression Ratio | 9.4:1 |
| Aspiration | Naturally Aspirated or Turbocharged-Aftercooled |
| Rotation from Flywheel End | Counterclockwise |
| Flywheel and Flywheel Housing | SAE No. 1 |
| Flywheel Teeth | 113 |
| Weight - Dry | 1360.8 kg |
| Oil Change Interval | 750 hours |
| Ignition, Protection | Altronic III |
| Stroke | 165 mm |
| Bore | 137 mm |
Capacity for Liquids
| Cooling System | 37.9 l |
| Lube Oil System - Refill | 75.7 l |
Air Inlet System
Air cleaner — heavy-duty
Air cleaner rain cap
Service indicator
Control System
Governor — Woodward PSG mechanical
Governor locking — positive control
Governor — Woodward PSG mechanical
Governor locking — positive control
Cooling System
Thermostats and housing
Jacket water pump
Aftercooler water pump
Aftercooler core
Thermostats and housing
Jacket water pump
Aftercooler water pump
Aftercooler core
Exhaust System
Watercooled exhaust manifolds
Dry exhaust elbow
Flywheel & Flywheel Housing
SAE No. 1 flywheel
SAE No. 1 flywheel housing
SAE standard rotation
Fuel System
Gas pressure regulator
Natural gas carburetor
Ignition System
Altronic III ignition system
Instrumentation
Service meter
Lube System
Crankcase breather — top mounted
Oil cooler
Oil filter — RH
Auxiliary oil reservoir
Oil pan — full sump
Oil filler in valve cover, dipstick — RH
Crankcase breather — top mounted
Oil cooler
Oil filter — RH
Auxiliary oil reservoir
Oil pan — full sump
Oil filler in valve cover, dipstick — RH
Mounting System
Engine supports
Engine supports
Protection System
Shutoffs
General
Paint — Cat yellow
Crankshaft vibration damper and drive pulleys
Lifting eyes
Air Inlet System
Precleaner
Charging System
Battery chargers
Charging alternators
Charging alternators f/u/w c customer supplied shutoffs
Ammeter gauge
Ammeter gauge and wiring
Control mounting
Battery chargers
Charging alternators
Charging alternators f/u/w c customer supplied shutoffs
Ammeter gauge
Ammeter gauge and wiring
Control mounting
Control System
PSG Woodward governor
Cooling System
Radiators
Non-sparking blower fan
Blower fans for customer supplied radiators
Fan drives for customer supplied radiators
ATAAC conversion
Aftercooler
Expansion tank
Heat exchangers
Radiators
Non-sparking blower fan
Blower fans for customer supplied radiators
Fan drives for customer supplied radiators
ATAAC conversion
Aftercooler
Expansion tank
Heat exchangers
Exhaust System
Flexible fittings
Elbow
Flange
Pipe
Rain cap
Muffler
Fuel System
Fuel filter
Natural gas valve and jet kits
Ignition System
CSA shielded ignition
Wiring harness
CSA shielded ignition
Wiring harness
Instrumentation
Gauges and instrument panels
Gauges and instrument panels
Lube System
Auxiliary oil reservoir removal
Lubricating oil
Auxiliary oil reservoir removal
Lubricating oil
Mounting System
Vibration isolators
Vibration isolators
Power Take-Offs
Auxiliary drive pulleys
Enclosed clutch and clutch support
Front stub shaft and flywheel stub shaft
Protection System
Gas valves
Starting System
Air starting motor
Electric air start control
Air pressure regulator
Air silencer
Electric starting motor— single 12- and 24-volt
Starting aids
Battery sets, cables, and rack
General
Damper guard
30 Mins