Marine Generator Sets

  • Specification Summary

  • Maximum Rating 25 ekW (25 kVA)
  • Displacement 2.2 l
  • Aspiration Naturally Aspirated / Turbocharged
  • Governor Type Electrical Ischronous
  • Download Brochure
product-C2.2 (Single Phase)
Cat® C2.2 Diesel Marine Generator Set has single phase ratings of 50 Hertz at 16.0 and 22.5 ekW and 60 Hertz at 19.0 and 27.0 ekW that meet U.S. EPA Tier 3 and EU IW emission standards.The Cat® C2.2 also has three phase ratings of 50 Hertz at 16.0 and 22.5 ekW and 60 Hertz at 19.5 and 27.0 ekW that meet U.S. EPA Tier 3 and EU IW emissions standards. This marine gen set is available in 12 or 24 volt as an open gen set or as an enclosed package.

Generator Set Specifications

Maximum Rating 25 ekW (25 kVA)
Minimum Rating 15 ekW (15 kVA)

Engine Specifications

Displacement 2.2 l
Aspiration Naturally Aspirated / Turbocharged
Governor Type Electrical Ischronous
Bore 84 mm
Stroke 90 mm
Rated Engine Speed 1500 / 1800 rpm
Emissions U.S. EPA Tier 3
Configuration Inline 4, 4-Stroke Cycle diesel
Refill Capacity Lube Oil System w/oil filter change: 10.6 L (2.8 gal)
Oil Change Interval 500 hrs
Rotation from Flywheel End Counterclockwise
Cooling Hex or Single Circuit Keel

Generator Set Dimensions

Length 47.9 in / 1,219 mm (open) 50.7 in / 1,290 mm (enclosed)
Width 22.3 in / 567 mm (open) 24.7 in / 628 mm (enclosed)
Height 32.8 in / 835 mm (open) 31.0 in / 775 mm (enclosed)
Engine Dry Weight 857-1,027 lb / 386-466 kg

Air Inlet System

 Air cleaner, single element canister type with rain cap (open generator set only)

Cooling System

 Belt-driven centrifugal jacket water pump, gear-driven seawater pump, heat exchanger with copper nickel tubes, expansion tank

Control System

 Electronic isochronous governor

Electronic isochronous governor

Exhaust System

 Watercooled exhaust manifold and elbow

Fuel System

 Fuel filter — RH or LH service, fuel priming, fuel transfer pump, flexible fuel lines

Fuel filter — RH or LH service, fuel priming, fuel transfer pump, flexible fuel lines

Generator

 Single-phase — brushless, shunt excited, 4-pole, 4-lead reconnectable with class H insulation, automatic voltage regulation ±0.5%, 2/3 pitch, IP23 water protection, solid state voltage regulator with integral voltage adjustment potentiometer,

Lube System

 Lubricating oil, oil filter (RH), dipstick (RH), fumes disposal (closed system)

Lubricating oil, oil filter (RH), dipstick (RH), fumes disposal (closed system)

Mounting System

 Anti-vibration mounts, connected to drip tray and steel base sitting on PVC foam sound-absorbent pad

Protection System

 Electronic automatic safety shutdown for low oil pressure, high water temperature, high exhaust (wet exhaust only) temperature, and overspeed

Starting System

 12 or 24 volt electronic starting motor, 12 volt 55 amp alternator

General

 Single-side service (RH), decals, literature

Single-side service (RH), decals, literature

Sound attenuated enclosure

Deluxe instrument panel

Basic instrument panel

Remote instrument panel extension harness

AC circuit breakers

Flexible fuel lines

Primary fuel filter/water separator

Siphon break

Keel-cooling kit

Exhaust system components

Oil drain pump

Insulated electric system

Noise reducing air inlet duct