Power Range | 1720 - 1820 ekW |
Frequency | 50 / 60 Hz |
Emissions/Fuel Strategy | U.S. EPA Tier 2, IMO II |
Aspiration | Turbocharged - Aftercooled |
Bore | 280 mm |
Stroke | 300 mm |
Displacement | 111 l |
Governor Type | Electronic |
Fuel System | EUI |
Compression Ratio 50 Hz | 13.1 |
Compression Ratio 60 Hz | 13:1 |
Engine Model | In-line 6, 4-Stroke-Cycle Diesel |
Length | 7120 mm |
Width | 1961 mm |
Height | 3934 mm |
Weight - Estimated | 8165 kg |
Aftercooler — fresh water, corrosion resistant coated (air side); air inlet shutoff; breather — crankcase, top-mounted; turbocharger — engine oil lubricated
Single Caterpillar® A3 electronic control unit (ECU) with electronic unit injector fuel system, rigid wiring harness (10 amp, 24 volt power required to drive ECUs)
Engine coolant water drains
Dry, gas tight, exhaust manifold
Distillate fuel (requires viscosity ranging from 1.4 cSt to 20 cSt at 38° C), fuel transfer pump (mounted on left-hand side), duplex fuel filters, electronically controlled unit injectors
Centrifugal oil filters with single shutoff, service side engine mounted on cylinder block inspection covers includes installed oil lines and single shutoff valve, filters centrifuge bypass oil from the main lubricating oil pump, can be serviced with the e
Caterpillar yellow paint; gear-driven pumps: fuel, oil, jacket water, aftercooler/oil cooler water; service literature