C1.5 Marine Generator Set Engine
Marine Generator Sets
-
Specification Summary
- Maximum Rating 12 ekW (12 kVA)
- Minimum Rating 10 ekW (10 kVA)
- Frequency 50 Hz or 60 Hz
- Displacement 1.5 l
Generator Set Specifications
| Maximum Rating | 12 ekW (12 kVA) |
| Minimum Rating | 10 ekW (10 kVA) |
| Frequency | 50 Hz or 60 Hz |
| Speed | 1500 / 1800 rpm |
Engine Specifications
| Displacement | 1.5 l |
| Aspiration | Naturally Aspirated |
| Governor Type | Electrical Isochronous |
| Bore | 84 mm |
| Stroke | 90 mm |
| Emissions | U.S. EPA Tier 3 |
| Configuration | Inline 3, 4-Stroke Cycle diesel |
| Refill Capacity | Lube Oil System w/oil filter change: 6 L (1.6 gal) |
| Oil Change Interval | 500 hrs |
| Rotation from Flywheel End | Counterclockwise |
| Cooling | Hex or Single Circuit Keel |
Generator Set Dimensions
| Length | 40.8 in / 1,038 mm (open) 43.1 in / 711 mm (enclosed) |
| Width | 21.1 in / 535 mm (open) 24.0 in / 608 mm (enclosed) |
| Height | 27.1 in / 535 mm (open) 27.9 in / 711 mm (enclosed) |
| Engine Dry Weight | 703 lb / 319 kg |
Air Inlet System
Air cleaner, single element canister type with rain cap (open generator set only)
Control System
Electronic isochronous governor
Electronic isochronous governor
Cooling System
Belt-driven centrifugal jacket water pump
gear-driven seawater pump
heat exchanger with copper nickel tubes
expansion tank
Exhaust System
Watercooled exhaust manifold and elbow
Fuel System
Fuel filter — RH or LH service
fuel priming
fuel transfer pump
flexible fuel lines
Fuel filter — RH or LH service
fuel priming
fuel transfer pump
flexible fuel lines
Generator
Single Phase
Single Phase
Lube System
Lubricating oil
oil filter (RH)
dipstick (RH)
fumes disposal (closed system)
Lubricating oil
oil filter (RH)
dipstick (RH)
fumes disposal (closed system)
Mounting System
Anti-vibration mounts, connected to drip tray and steel base sitting on PVC foam sound-absorbent pad
Anti-vibration mounts, connected to drip tray and steel base sitting on PVC foam sound-absorbent pad
Protection System
Electronic automatic safety shutdown for low oil pressure, high water temperature, high exhaust (wet exhaust only) temperature, and overspeed
Electronic automatic safety shutdown for low oil pressure, high water temperature, high exhaust (wet exhaust only) temperature, and overspeed
Starting System
12 or 24 volt electronic starting motor, 12 volt 55 amp alternator
General
Single-side service (RH), decals, literature
