C18 Marine Generator Set
Marine Generator Sets
-
Specification Summary
- Power Range 260 - 565 ekW
- Frequency 50 / 60
- Minimum Rating 260 ekW (325 kVA)
- Maximum Rating 565 ekW (706 kVA)
Power Rating
| Power Range | 260 - 565 ekW |
Generator Set Specifications
| Frequency | 50 / 60 |
| Minimum Rating | 260 ekW (325 kVA) |
| Maximum Rating | 565 ekW (706 kVA) |
Engine Specifications
| Configuration | In-line 6, 4-Stroke-Cycle Diesel |
| Aspiration | Turbocharged - Aftercooled |
| Bore | 145 mm |
| Stroke | 183 mm |
| Fuel System | MEUI |
| Oil Change Interval | 250 / 500 hours |
| Governor | Electronic |
| Refill Capacity | 68 |
| Cooling | Heat Exchanger, Keel, Radiator Cooled |
| Rotation from Flywheel End | SAE No. (136 teeth) |
Generator Set Configurations
| Emissions | EPA Tier 3, IMO II, EU IWW, EU Stage V, China II |
Generator Set Dimensions - Radiator Cooled
| Height | 2408 mm |
| Length | 4741 mm |
| Width | 1699 mm |
| Weight - Approximate | 6076 kg |
Generator Set Dimensions - Keel and Hex Cooled
| Length | 3038 mm |
| Height | 1648 mm |
| Width | 1411 mm |
| Weight - Approximate | 4221 kg |
Generator Specifications
| Excitation | SRMP |
| Insulation | Class H |
| IP Rating | IP23 (standard), IP 44 (optional) |
| Voltage Regulator | CDVR (Digital Voltage) |
Air inlet system
Separate circuit after-cooled (SCAC)
Heavy-duty inlet air filter
Cooling system
SCAC pump, gear driven, for HEX cooled engines only
Jacket water pump, gear driven
SCAC and JW shunt tanks for maintaining proper pump inlet pressures
SCAC pump, gear driven, for HEX cooled engines only
Jacket water pump, gear driven
SCAC and JW shunt tanks for maintaining proper pump inlet pressures
Exhaust system
Water-cooled exhaust manifold & turbocharger
Round flanged exhaust outlet
Water-cooled exhaust manifold & turbocharger
Round flanged exhaust outlet
Fuel system
Hybrid fuel lines
MEUI™ fuel system
Fuel filter, front service
Fuel transfer and priming pumps
Lube system
Center sump oil pan, deep
Front and top service oil filler locations
Front service dipstick
Center sump oil pan, deep
Front and top service oil filler locations
Front service dipstick
Mounting system
Vibration Isolators
Formed C-channel rails
Control system
Electronic fuel/air ratio control
SRMP permanent magnet 12-lead generator
Digital voltage regulator
Class H insulation, Class F temperature rise, IP23 protection
Exhaust system
Dry Elbows
Water-Cooled Elbows
Flexible Fitting
Flange
Muffler
Muffler, Spark Arresting
Fumes disposal (closed system)
Dry Elbows
Water-Cooled Elbows
Flexible Fitting
Flange
Muffler
Muffler, Spark Arresting
Fumes disposal (closed system)
Air inlet system
Air Inlet Adapter
Charging system
Battery Chargers 10 amp
Battery sets: 24V 950-1300 CCA
Charging alternator 24V 105 amp
Control system
Caterpillar alarm and protection
EMCP 4.2 control panel
MGCP III B control panel
Caterpillar alarm and protection
EMCP 4.2 control panel
MGCP III B control panel
Fuel system
Duplex fuel filter – front service
Fuel cooler
Primary fuel/water separator
Duplex fuel filter – front service
Fuel cooler
Primary fuel/water separator
Instrumentation
Generator service side - LH, RH
Generator terminal box extension
Load sharing module (option for type approved module)
Lube system
Spare pump kits
Duplex oil filter – front service
Manual sump pump
Mounting system
Vibration Isolators
Power Take-Offs
Protection system
Generator protection - IP44
Starting system
Starting motors - electric and/or air
Jacket water heaters
