• Banner
Marine Generator Sets

Industry-leading technology allows Caterpillar to create the most reliable commercial engines for a variety of applications. From tugs and container vessels to yachts and sport fishers, Cat and MaK engines have demonstrated their efficiency countless times. With remarkable reliability and durability, these engines will exceed your expectations for decades.

Cat C32 Generator Set (US EPA Tier 3 / IMO II)

  • Specification Summary

  • Minimum Rating 219 ekW
  • Maximum Rating 940 ekW
  • Frequency 60hz
  • Rated Engine Speed 1800 rpm

Product Details

Generator Set Specifications

Minimum Rating 219 ekW
Maximum Rating 940 ekW
Frequency 60hz

Engine Specifications

Rated Engine Speed 1800 rpm
Configuration Vee-12, 4-stroke-Cycle-Diesel
Aspiration Turbocharged-aftercooled aspiration
Bore 145 mm
Stroke 162 mm
Displacement 32.1 l
Governor Electronic (A4 ECM)
Emissions U.S. EPA Tier 3 / IMO II emissions certified
Generator SR5 - Form Wound
Refill Capacity Lube Oil System w/ oil filter change: 146 L (38.5 gal)
Cooling Heat exchanger, keel or radiator cooled
Oil Change Interval 750 hrs

Generator Set Dimensions

Length 167.2 in/4245 mm (minimum), 226.1 in/5742 mm (maximum)
Width 59.9 in/1521 mm (minimum), 89.8 in/2280 mm (maximum)
Height 70.4 in/1747 mm (minimum), 92.8 in/2356 mm (maximum)
Package Dry Weight 15721 lb/7131 kg (minimum), 21998 lb/9978 kg (maximum)
  • AIR INLET SYSTEM
    •  Separate circuit aftercooled (SCAC)
  • Separate circuit aftercooled (SCAC)
    • CONTROL SYSTEM
      •  24V control system
    • COOLING SYSTEM
      •  Heat exchanger, keel or radiator cooled
      •  Watercooled exhaust manifold and turbocharger
      •  Hard seawater lines – no flexible hoses
      •  Flanges for cooling connections, ANSI or DIN
    • FUEL SYSTEM
      •  Duplex fuel filters with hybrid fuel lines
      •  Fuel transfer and priming pump
    • GENERATORS AND GENERATOR ATTACHMENTS
      •  IP23, air cooled, form wound SR5 generator offered in 440, 480 and 690V
    • LUBE SYSTEM
      •  Oil fill, simplex filter and dipstick
    • MOUNTING SYSTEM
      •  Helical spring/rubber isolated mounting for vibration and structure borne noise reduction
    • Helical spring/rubber isolated mounting for vibration and structure borne noise reduction
      • GENERAL
        •  Right or left hand service sides
        •  Customer wiring and service tool connector
      • AIR INLET SYSTEM
        •  Closed crankcase ventilation
      • Closed crankcase ventilation
        • ALARM AND PROTECTION
          •  MGCP II or MGCP IIIB control panel with Cat® alarm and protection system
          •  IP44 generator protection
        • EXHAUST SYSTEM
          •  Muffler
          •  SOLAS approved spray shielding
        • CHARGING SYSTEM
          •  Charging alternator
        • Charging alternator
          • CONTROL SYSTEM
            •  EMCP 4.2 control panel
          • FUEL SYSTEM
            •  Installed primary fuel filter with water separator and manual or electric priming pump
            •  Fuel cooler
          • LUBE SYSTEM
            •  Duplex oil filters
          • Duplex oil filters
            • STARTING SYSTEM
              •  Starting motors – air, electric or dual
            • Starting motors – air, electric or dual

              20 Similar Products Available in Used

              View

              PM Kit for the model you are seeing

              Signup to Al-Bahar Monthly newsletter and stay connected!

              We respect your privacy and will never share or sell your information.