• Banner
Marine Generator Sets

Industry-leading technology allows Caterpillar to create the most reliable commercial engines for a variety of applications. From tugs and container vessels to yachts and sport fishers, Cat and MaK engines have demonstrated their efficiency countless times. With remarkable reliability and durability, these engines will exceed your expectations for decades.

Cat C32 Generator Set (IMO III)

  • Specification Summary

  • Minimum Rating 219 ekW
  • Maximum Rating 940 ekW
  • Frequency 60hz
  • Rated Engine Speed 1500 rpm

Product Details

Generator Set Specifications

Minimum Rating 219 ekW
Maximum Rating 940 ekW
Frequency 60hz

Engine Specifications

Rated Engine Speed 1500 rpm
Configuration Vee-12, 4-stroke-Cycle-Diesel
Aspiration Turbocharged-aftercooled aspiration
Bore 145 mm
Stroke 162 mm
Displacement 32.1 l
Governor Electronic (A5 ECM)
Emissions IMO III emissions certified (SCR required)
Refill Capacity Lube Oil System w/ oil filter change: 146 L (38.5 gal)
Oil Change Interval 750 hrs
Cooling Heat exchanger, keel or radiator cooled
Generator SR5 - Form Wound

Generator Set Dimensions

Length 167.2 in/4245 mm (minimum), 226.1 in/5742 mm (maximum)
Width 59.9 in/1521 mm (minimum), 89.8 in/2280 mm (maximum)
Height 70.4 in/1747 mm (minimum), 92.8 in/2356 mm (maximum)
Package Dry Weight 15721 lb/7131 kg (minimum), 21998 lb/9978 kg (maximum)
  • AIR INLET SYSTEM
    •  Separate circuit aftercooled (SCAC)
    •  Closed crankcase fumes disposal
  • CONTROL SYSTEM
    •  24V control system
  • 24V control system
    • COOLING SYSTEM
      •  Heat exchanger or Keel Cooling
      •  Watercooled exhaust manifold and turbocharger
      •  Hard seawater lines – no flexible hoses
      •  Flanges for cooling connections, ANSI or DIN
    • FUEL SYSTEM
      •  Primary fuel filter with water separator installed on base frame
      •  Duplex fuel filters with hybrid fuel lines
    • GENERATORS AND GENERATOR ATTACHMENTS
      •  IP23, air cooled, form wound SR5 generator offered in 380, 400, 415 and 690 V
    • LUBE SYSTEM
      •  Oil fill, simplex filter and dipstick
    • MOUNTING SYSTEM
      •  Helical spring/rubber isolated mounting for vibration and structure borne noise reduction
    • GENERAL
      •  Right or left hand service sides
      •  Customer wiring and service tool connector
    • ALARM AND PROTECTION
      •  MGCPIIIB control panel with Cat® Alarm and Protection System
      •  IP44 generator protection
    • EXHAUST SYSTEM
      •  Muffler
      •  Water-in-fuel and exhaust temperature sensors
      •  SOLAS approved spray shielding
    • CHARGING SYSTEM
      •  Charging alternator
    • Charging alternator
      • FUEL SYSTEM
        •  Manual or electric fuel priming pump
        •  Fuel cooler
      • Manual or electric fuel priming pump
        • Fuel cooler
          • LUBE SYSTEM
            •  Duplex oil filters
          • STARTING SYSTEM
            •  Starting motors – air, electric or redundant

          Have a Question1?

          Signup to Al-Bahar Monthly newsletter and stay connected!

          We respect your privacy and will never share or sell your information.