Cat C32 Marine Propulsion Engine High Performance Applications
High Performance Propulsion Engines
-
Specification Summary
- Power Range 1600-1900 bhp (1193-1417 bkW)
- Speed Range 2300 rpm
- Emissions IMO II, U.S. EPA Tier 3 Recreational, RCD, China Stage II
- Aspiration Twin Turbocharged-aftercooled
Ratings
| Power Range | 1600-1900 bhp (1193-1417 bkW) |
Engine
| Speed Range | 2300 rpm |
| Emissions | IMO II, U.S. EPA Tier 3 Recreational, RCD, China Stage II |
| Aspiration | Twin Turbocharged-aftercooled |
| Bore | 145 mm |
| Stroke | 162 mm |
| Displacement | 32.1 l |
| Rotation from Flywheel End | Counterclockwise |
| Configuration | Vee 12, 4-Stroke Cycle diesel |
Dimensions & Weights
| Length | 2106 mm |
| Width | 1482 mm |
| Height | 1445 mm |
| Dry Weight | 3075 kg |
AIR INLET SYSTEM
Air Cleaner System with washable filter elements and fumes disposal (closed system)
Turbocharger, jacket water cooled
Turbocharger inlet, 152 mm (6 in) OD straight connection
Air Cleaner System with washable filter elements and fumes disposal (closed system)
Turbocharger, jacket water cooled
Turbocharger inlet, 152 mm (6 in) OD straight connection
CONTROL SYSTEM
Programmable Low Idle (550 - 750 rpm)
Electronic diagnostics and fault logging
Engine and transmission monitoring (speed, temperature, pressure)
Electronic fuel/air ratio control
Engine Protection Mode for extended ambient conditions
70-pin customer connector (Upper front-facing customer wiring connector and Service Tool connection)
Throttle Input signal options
COOLING SYSTEM
Sea Water Aftercooled Engine
Jacket water pump, gear driven
Sea water pump, rubber impeller, gear driven
Sea water Pump & JW Heat Exchanger Connection: 76.2 mm (3in) OD
Coolant recovery system
Sea Water Aftercooled Engine
Jacket water pump, gear driven
Sea water pump, rubber impeller, gear driven
Sea water Pump & JW Heat Exchanger Connection: 76.2 mm (3in) OD
Coolant recovery system
EXHAUST SYSTEM
Water-cooled exhaust manifold & turbocharger
4 Bolt 130 mm (5.12 in) diameter flanged outlet
Water-cooled exhaust manifold & turbocharger
4 Bolt 130 mm (5.12 in) diameter flanged outlet
FLYWHEELS & FLYWHEEL HOUSINGS
Flywheel Housing:
FUEL SYSTEM
Simplex Fuel Filters Spin-on, RH & LH service
Fuel connections size:
Plate Type Fuel Cooler (Jacket Heat Exchanger)
Fuel transfer pump, gear driven
Manual fuel priming pump
Hybrid fuel line design
Simplex Fuel Filters Spin-on, RH & LH service
Fuel connections size:
Plate Type Fuel Cooler (Jacket Heat Exchanger)
Fuel transfer pump, gear driven
Manual fuel priming pump
Hybrid fuel line design
LUBE SYSTEM
Simplex Oil Filters, RH or LH service
RH or LH service oil filler locations
RH or LH service dipstick
Oil pump, gear driven
Shallow Sump
MOUNTING SYSTEM
Front support - adjustable
POWER TAKE-OFFS
Front Poly-V groove pulley (Quantity 1) for auxiliary drives
Front Poly-V groove pulley (Quantity 1) for auxiliary drives
GENERAL
Lifting eyes
Front damper guard
RH or LH service options
EXHAUST SYSTEM
Muffler
Muffler Spark Arresting
Muffler
Muffler Spark Arresting
CHARGING SYSTEM
Battery Chargers
Charging Alternators
Ammeter
Battery Chargers
Charging Alternators
Ammeter
FUEL SYSTEM
Water Separator
INSTRUMENTATION
Instrument Panels
OEM Wiring Harness
Engine to Engine Harness
Gauges
Transmission Sensors
Exhaust Temperature Sensors
LUBE SYSTEM
Transmission Oil Cooler
MOUNTING SYSTEM
Adapter Kits
Isolator Mounts
Adapter Kits
Isolator Mounts
POWER TAKE-OFFS
Rear Hydraulic Pump Drive
Rear Hydraulic Pump Drive
PROTECTION SYSTEM
Fuel and Oil Shielding
STARTING SYSTEM
Electric Starting Motors - Single 24 Volt
Starting Aids - JW Heaters
Battery Sets - 24 Volt - Dry
CONTROL SYSTEM
Instrument Panels
Instrument Panels
PACKING
Engine Protective Cover
Storage Preservation
Export Packing
30 Mins